Combination Tap Assemblies

Section Code 0450 : Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

#2309925

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature with single lever type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2309925
Expiry date:
30/09/2028
Size:
Model IT1008CP 10mm copper tails Model IT1008FT Stainless steel braided EPDM flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Model, date of manufacture (MM/YY) on body. Inta on operating member.
Installation Requirements:
R001 R006
Model:
IT1008CP IT1008FT
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Country
United Kingdom
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval

#1906903

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating non-rising spindle headworks with dome type members. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste. Models VAC BAS E4 C MT & VAC BAS E6 C MT are also supplied with a plastic flow regulator, intended for installation at the inlets. Maximum operating pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906903
Expiry date:
30/06/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
Marking:
Bristan on operating member.
Installation Requirements:
R001 R006 R010
Model:
VAC BAS C MT, VAC BAS E4 C MT & VAC BAS E6 C MT.
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1906703

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks (M0808G model) or non-rising spindle headworks (M0108, M0108F, M0608 & M0808 models) headworks and various operating members (see model). The spout outlet incorporates a plastic flow straightener. The inlet hoses incorporate an EPDM washer on the inlets. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906703
Expiry date:
30/06/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
PPI on rear of body
Installation Requirements:
R001 R006 R010
Model:
M0108 (dome type operating member), M0108F (cross top operating member), M0608 (cross top operating member), M0808 (cross top operating member), M0808G (single lever operating member).
Factor:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1905309

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905309
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections
Marking:
Herz logo on body
Installation Requirements:
R001 R006 R009 R010
Model:
SQ range: q10 & q12. Elite range: e10 & e12.
Factor:
Herz Valves UK Ltd
Company Name
Herz Valves UK Ltd
Address
Progress House, Moorfield Point, Moorfield Road
Postcode
GU1 1RU
Country
Slyfield Industrial Estate,
Phone
+44 1483 502211
General Email
sales@herzvalves.com

View All Listings by this Company
Manufacturer:
Herz DD
Company Name
Herz DD
Address
GRMASKA CESTA 3 1275 SMARTNO PRI LITIJI SLOVENIA
General Email

View All Listings by this Company

Print This Approval

#1905360

Range of two hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating ceramic cartridge headwork with single lever operating members. Maximum working pressure 4.0 bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905360
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Kohler on operating member
Installation Requirements:
R001 R006 R010
Model:
Loure DM 14675W-4-**. ‘**’ denotes finish and can be replaced by: CP – Polished chrome SN – Vibrant polished Nickel BN – Vibrant Brushed Nickel
Factor:
Kohler UK
Company Name
Kohler UK
Address
Cromwell Road Cheltenham GL52 5EP
Phone
+44 (0)1242 283790
General Email
info@kohler.co.uk

View All Listings by this Company

Print This Approval

#1905338

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905338
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut
Marking:
Lota on body
Installation Requirements:
R001 R006 R009 R010
Model:
60148-5101
Manufacturer:
Xiamen Lota International Co. Ltd.
Company Name
Xiamen Lota International Co. Ltd.
Address
No 61 Xingnan Road Jimei District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1905329

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator and some models are supplied with a pop-up waste. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905329
Expiry date:
31/05/2024
Note:
No testing performed on pop-up waste
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
Duravit on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
B31010 0010 10, B31010 0020 10, B31020 0010 10, B31020 0020 10, B31030 0010 10 & B31030 0020 10.
Factor:
Duravit AG
Company Name
Duravit AG
Address
Werderstrasse 36 78132 Hornberg Germany

View All Listings by this Company

Print This Approval

#1905365

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator & the product is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 55°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905365
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
AV on body.
Installation Requirements:
R001 R006 R010
Model:
500267PEX0
Manufacturer:
Vicario Armando & C Srl
Company Name
Vicario Armando & C Srl
Address

View All Listings by this Company

Print This Approval

#1905372

‘Eurocube E’ wall mounted, electronically operated combination tap assemblies (chromium plated brass) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlets incorporate a plastic aerator. Model 36.264.001 is an installation set intended for use with model 36.442. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905372
Expiry date:
31/05/2024
Size:
½” BSP (M)
Marking:
Grohe on face sensor plate
Installation Requirements:
R001 R040
Model:
Grohe ‘Eurocube E’ 36.442 & 36.264.001.
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval

#1905386

Opal Prime range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905386
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Jaquar on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
Opal Prime OPP-CHR-15005-BPM & OPP-CHR-15011-BPM
Factor:
Jaquar UK Ltd
Company Name
Jaquar UK Ltd
Address
Betchworth House 57-65 Station Road Redhill
Postcode
RH1 1DL
Country
Surrey
Phone
+44 844 807 2345

View All Listings by this Company
Manufacturer:
Jaquar UK Ltd
Company Name
Jaquar UK Ltd
Address
Betchworth House 57-65 Station Road Redhill
Postcode
RH1 1DL
Country
Surrey
Phone
+44 844 807 2345

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1 of 57

© WRAS 2024 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.