Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating self-closing headwork with a dome type operating member. Models also incorporate a straightner and metal back nuts. Maximum operating pressure 3.0 bar. Cold water use only

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1911301

Expiry date:

30/11/2024

Size:

3/8" BSP (M)

Marking:

Special Taps logo ‘ST’ (S placed above the letter T) on body

Installation Requirements:

R001 R006

Model:

105 push button tap

Manufacturer:

Special Taps Srl

Company Name

Special Taps Srl

Address

Via Delle Beulle 11 28010 Cavallirio Italy

View All Listings by this Company

Single hole, single outlet, fixed combination tap assembly (brass body with various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1911322

Expiry date:

30/11/2024

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections

Marking:

Crosswater 'X' logo on rear of body

Installation Requirements:

R001 R006 R009 R010

Model:

ZR06_110x Basin Monobloc Where x denotes finish and can be replaced by: C = Chrome, V = Stainless steel effect, F = Brushed brass, M = Matt Black, A = Anthracite, W = White, B = Brushed Black Chrome, N = Polished Nickel, L = Brushed Nickel, Q = Unlacquered Brass, RG = Rose Gold, BGR = Brushed Rose Gold, P = Copper.

Factor:

Crosswater Ltd.

Company Name

Crosswater Ltd.

Address

Lake View House, Rennie Drive, Dartford.

Postcode

DA1 5FU

Phone

0845 873 8840

View All Listings by this Company

Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a stainless-steel aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 85°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1911909

Expiry date:

30/11/2024

Size:

Stainless steel braided EPDM lined hose assemblies incorporating a ½” captive nut end connections

Marking:

Bristan on operating member

Installation Requirements:

R001 R006 R010

Model:

GWF BASNW C

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with chromium plated brass bodies. Incorporating a ¼ turn ceramic disc headworks and single lever operating member. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910046

Expiry date:

31/10/2024

Size:

½” BSP (M)

Marking:

HUANRI on rear of tap body.

Installation Requirements:

R001 R006

Model:

4005AG5 4005BD18

Manufacturer:

Zhejiang Huanri Sanitation Co Ltd

Company Name

Zhejiang Huanri Sanitation Co Ltd

Address

Xuanmen Industrial Zone, Lupu Town Yuhuan County Zhejiang Province

Country

China

Phone

86 0576 87144858

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporation quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2003804

Expiry date:

31/03/2025

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

PPI on rear of body.

Installation Requirements:

R001 R005 R010

Model:

M5008

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

Country

China

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The INBPUWCPUK model is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1912307

Expiry date:

31/12/2024

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

DTC (brand of Methven) on body Marking from November 2020: DTC53 (brand of Methven) on rear of body. Methven on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

WAIBCPUK - Wai. WAIBMCPUK - Wai. WAITBCPUK - Wai. ZON313 - Zonos. ETH313 - Ethos. INBPUWCPUK - Indra. From November 2020 the following new finishes have been added: WAIBCPUK: WAIBBB - Brushed Brass WAIBBK - Matte Black WAIBBN - Brushed Nickel WAIBGM - Gunmetal WAIBMCPUK: WAIBMBB - Brushed Brass WAIBMBK - Matte Black WAIBMBN - Brushed Nickel WAIBMGM - Gunmetal WAITBCPUK: WAITBBB - Brushed Brass WAITBBK - Matte Black WAITBBN - Brushed Nickel WAITBGM - Gunmetal Models added May 2023: 77410 T-ETH313BK - Matte Black T-ETH313BB - Brushed Brass T-ZON313 Model added September 2023: ETH313BK SVL313

Factor:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

View All Listings by this Company

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Product is supplied with a pop-up waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 65°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1912904

Expiry date:

31/12/2024

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections

Marking:

Bristan on operating member

Installation Requirements:

R001 R006 R010

Model:

BRT SQU2 BAS C

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. This product is supplied with plastic flow regulators which are designed to be fitted on the inlet hoses. These products are also supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001002

Expiry date:

31/01/2025

Size:

Stainless steel braided EDPM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Francis Pegler (brand of Comap) on operating member.

Installation Requirements:

R001 R006 R010

Model:

4K7001 4K7002

Factor:

Comap UK Limited

Company Name

Comap UK Limited

Address

Unit C6 William Way Moss Ind Estate St Helens Road

Postcode

WN7 3PT

Country

Leigh

View All Listings by this Company

Manufacturer:

COMAP (JIANGMEN)

Company Name

COMAP (JIANGMEN)

Address

98 Longxi High Tech Zone Guangdong

View All Listings by this Company

Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 33500710 and 33505710 models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001005

Expiry date:

31/01/2025

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies with 10mm spigot end connections.

Marking:

DORNBRACHT on body

Installation Requirements:

R001 R006 R009 R010

Model:

33500710 single lever basin mixer with pop-up waste 33505710 single lever basin mixer with pop-up waste 33521710 single lever basin mixer without pop-up waste 33534710 single lever basin mixer without pop-up waste

Factor:

Aloys F Dornbracht GmbH & Co KG

Company Name

Aloys F Dornbracht GmbH & Co KG

Address

Koebbingser Muehle 6 D-58640 Iserlohn Germany

Phone

+49 2371 433 0

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. The BC574AA model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001016

Expiry date:

31/01/2025

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided polyethylene lined flexible hose assemblies with ⅜” captive nut end connections.

Marking:

Ideal standard logo on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

BC573AA - TEMPO BASIN MIXER CHROME NO PUW BC574AA - TEMPO BASIN MIXER CHROME PUW

Factor:

Ideal Standard (UK) Ltd

Company Name

Ideal Standard (UK) Ltd

Address

Old Road (Lodge 1) Armitage, Rugeley, Staffordshire

Postcode

WS15 4BT

View All Listings by this Company