Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and optional ⅜” BSP (M) x ½” BSP (F) adaptors each with two fibre gaskets for installation on each inlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001360

Expiry date:

31/01/2025

Note:

No testing has been performed on the pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Gessi on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

Art.18601 VIA TORTONA Art.18602 VIA TORTONA

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Country

Italy

Phone

+39 0163 454111

View All Listings by this Company

Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating non-rising spindle headworks with dome type operating memebers. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001915

Expiry date:

31/01/2025

Size:

15mm copper pipe

Marking:

Bristan on operating member

Installation Requirements:

R001 R006 R010

Model:

VAC BASNW C MT

Factor:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon

Postcode

B78 1SG

Country

Tamworth

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (various finishes), incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a rubber aerator. Product is supplied with a lever type pop-up waste Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001090

Expiry date:

31/01/2025

Size:

Stainless steel PEX lined flexible hose with 3/8” BSP captive nut end connections

Marking:

AXOR on front of tap body

Installation Requirements:

R001 R006 R009 R010

Model:

10 015 xxx Available in customised finishes ‘xxx’ denotes the finish: - 000 Chrome - 020 PVD polished chrome - 260 PVD Brushed chrome - 830 PVD Polished nickel - 820 PVD Brushed nickel - 990 PVD Polished gold optic - 250 PVD Brushed gold optic - 300 PVD Polished red gold - 310 PVD Brushed red gold - 130 PVD Polished bronze - 140 PVD Brushed bronze - 330 PVD Polished black chrome - 340 PVD Brushed Black chrome - 930 PVD Polished brass - 950 PVD Brushed brass - 800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

Country

Germany

View All Listings by this Company

Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating non-rising spindle headworks with dome type operating memebers. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001921

Expiry date:

31/01/2025

Size:

15mm copper pipe

Marking:

SWAN LOGO (BRAND OF WOLSELEY) ON OPERATING MEMBER

Installation Requirements:

R001 R006 R010

Model:

C58108

Factor:

WOLSELEY

Company Name

WOLSELEY

Address

KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK

Postcode

CV34 6DY

View All Listings by this Company

Pillar taps with chromium plated brass bodies, incorporating a ¼ turn ceramic disc headwork and single lever operating members. The tap is supplied with a flow straightener and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature is 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001111

Expiry date:

31/01/2025

Size:

½” BSP (M).

Marking:

INSTINCT (BRAND OF PHG) ON OPERATING MEMBER

Installation Requirements:

R001 R006

Model:

4E1285 ELION DECK BATH FILLER

Factor:

Plumbing & Heating Group

Company Name

Plumbing & Heating Group

Address

C/O Tippers Builders Merchants, Europa Way, Lichfield

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Both models are supplied with a click type pop-up waste, plastic flow regulators on each inlet and an alternative (loose) flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001114

Expiry date:

31/01/2025

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

INSTINCT (BRAND OF PHG) ON OPERATING MEMBER

Installation Requirements:

R001 R006 R010

Model:

4E1151 ESPADA MONO BASIN MIXER WITH CLICK WASTE & 4E1152 ESPADA MINI BASIN MIXER WITH CLICK WASTE

Factor:

Plumbing & Heating Group

Company Name

Plumbing & Heating Group

Address

C/O Tippers Builders Merchants, Europa Way, Lichfield

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. This product is supplied with plastic flow regulators which are designed to be fitted on the inlet hoses. These products are also supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001115

Expiry date:

31/01/2025

Size:

Stainless steel braided EDPM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

INSTINCT (BRAND OF PHG) ON OPERATING MEMBER

Installation Requirements:

R001 R006 R010

Model:

4E1141 WATERFALL MONO BASIN WITH CLICK WASTE & 4E1142 WATERFALL MINI MONO BASIN WITH CLICK WASTE

Factor:

Plumbing & Heating Group

Company Name

Plumbing & Heating Group

Address

C/O Tippers Builders Merchants, Europa Way, Lichfield

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. This product is supplied with plastic flow regulators which are designed to be fitted on the inlet hoses. These products are also supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001116

Expiry date:

31/01/2025

Size:

Stainless steel braided EDPM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

esteem (Trademark of PHI) on operating member

Installation Requirements:

R001 R006 R010

Model:

E60066 VETTIS MONO BASIN MIXER WITH CLICK WASTE & E60067 VETTIS MINI MONO BASIN MIXER WITH CLICK WASTE

Factor:

Plumbing and Heating Ltd

Company Name

Plumbing and Heating Ltd

Address

The Whitehouse Wilderspool Park Greenalls Avenue

Postcode

WA4 6HL

Country

Stockton Heath

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Both models are supplied with a click type pop-up waste, plastic flow regulators on each inlet and an alternative (loose) flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001118

Expiry date:

31/01/2025

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

esteem (Trademark of PHI) on operating member

Installation Requirements:

R001 R006 R010

Model:

E60071 KISDON MONO BASIN MIXER WITH CLICK WASTE & E60072 KISDON MINI MONO BASIN WITH CLICK WASTE

Factor:

Plumbing and Heating Ltd

Company Name

Plumbing and Heating Ltd

Address

The Whitehouse Wilderspool Park Greenalls Avenue

Postcode

WA4 6HL

Country

Stockton Heath

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightener. Model B9868AA is supplied with a pop-up waste and a weighted chain. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001079

Expiry date:

31/01/2025

Note:

No testing preformed on the pop-up waste

Size:

Stainless steel braided EDPM lined hose assembly incorporating 15mm compression end connections

Marking:

ISI on rear of tap body + Armitage Shanks on operating member screw caps

Installation Requirements:

R001 R006 R010

Model:

B9867AA Sandringham 21 B9868AA Sandringham 21 B9869AA Sandringham 21

Factor:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Country

Staffordshire,

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company