Section: 0022  View Entire Section

Print this entry

WRAS Approval Number: 1102045

Type DB pipe interrupter with moving element and atmospheric vent. The device has a brass body and EPDM `O` rings. Maximum working pressure 10.0 bar @ 50°C.

Size: Inlet – 12mm pushfit.Outlet - ½” BSP.

Model: Pipe Interrupter 6302B.

Marking: Model number, product information, direction of flow arrow and size on body.

View Installation Requirements: R001               

Proviso:  

Note: Inlet/Outlet connections must be installed where light is excluded.

Manufacturer: Arjo Hospital Equipment AB

Factor:  

Section: 0055  View Entire Section

Print this entry

WRAS Approval Number: 1004046

`Parker bath 500` geriatric bath with liftable access door. The bath can be adjusted for height and tilted via a wired remote control unit. Flow is electronically controlled via solenoid valves and a Thermostatic Mixing Valve (F M Mattsson) which feeds a bath spout outlet and a shower stem with trigger operated shower head. Water is supplied via hot and cold angled inlet valves which incorporate single check valves (Watts Industries TK model IO DN20) (suitable for backflow protection up to fluid category 2). Maximum and minimum working pressures 6.0 bar and 0.7 bar respectively.

Size: ¾" male BSP connections on hot and cold inlet valves.

Model: Parker bath 500.

Marking: `Arjo Huntleigh` printed onto control panel. Technical data printed onto adhesive label fixed to underside of bath.

View Installation Requirements: R001               

Proviso:  

Note:  

Manufacturer: Arjo Hospital Equipment AB

Factor:  

Section: 0055  View Entire Section

Print this entry

WRAS Approval Number: 1103043

Range of geriatric baths. Flow is controlled via solenoid valves and a thermostatic mixing valve which feeds a bath spout outlet and shower outlets with trigger operated shower heads. The appliance incorporates an AUK3 air gap arrangement to the bath, and type `DB` device to shower outlets. Water is supplied via hot and cold angled isolation valves which incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and a stainless steel strainer. Maximum working pressure 6 bar.

Size: ¾” BSP male inlets.

Model: System 2000 – Primo/Rhapsody.

Marking: Arjo on hood cover and model on spout outlet.

View Installation Requirements: R001  R006            

Proviso:  

Note: These appliances incorporate fluid category 5 backflow protection to the shower handset and bath spout.

Manufacturer: Arjo Hospital Equipment AB

Factor:  

Section: 0970  View Entire Section

Print this entry

WRAS Approval Number: 0809313

`Multiclean` pumped disinfection unit for use with geriatric bathing equipment, fed via a solenoid valve (RPE Srl) and flexible hose to a Type AB air gap which is arranged to supply a pump which then supplies the disinfectant to a hand held spray attachment. Maximum working pressure 6.0 bar.

Size: ½" BSP (M) Inlet.

Model: Arjo Multiclean.

Marking: Casing badged range name and manufacturers name.

View Installation Requirements: R001               

Proviso:  

Note:  

Manufacturer: Arjo Hospital Equipment AB

Factor: Parker Bath Ltd.

Section: 1530  View Entire Section

Print this entry

WRAS Approval Number: 1011005

Lever operated spherical valve assembly with a brushed chrome and cast brass body, EPDM O-rings and PTFE seat. The assembly incorporates a stainless steel strainer and temperature sensor. The outlet incorporates a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 8 bar & maximum operating temperature 95°C.

Size: Inlet – ¾” male BSP. Outlet – 22mm compression.

Model: Ball valve 374 / Strainer 594.

Marking: Model number, size and Product Information on ball valve body and lever.Model number ‘LK’, direction of flow arrow on filter body.‘LK’ on elbow connection.

View Installation Requirements: R001               

Proviso:  

Note:  

Manufacturer: ARJO Hospital Equipment AB

Factor:  

Section: 1530  View Entire Section

Print this entry

WRAS Approval Number: 1011006

`Shower Splitter` with brass body and EPDM O-rings. The assembly incorporates a temperature sensor and `JG` push-fit connectors. Maximum working pressure 8.0 bar & maximum operating temperature 50°C.

Size: 12mm pushfit inlets, 15mm spigot outlet.

Model: Shower splitter – 58215.

Marking: Arjo and model number on body.

View Installation Requirements: R001               

Proviso:  

Note:  

Manufacturer: Arjo Hospital Equipment AB

Factor:  

Section: 1530  View Entire Section

Print this entry

WRAS Approval Number: 1011007

Bleeder T Type with plastic body, EPDM O-rings and John Guest push fit fittings on the inlets. For use with either copper or PEX tube. Maximum working pressure 8.0 bar at 50°C.

Size: 12mm pushfit fittings, 6mm spigot connection.

Model: Bleeder T Type 8258197

Marking: 8258197 and Product Information on body.8258197 PP on spigot connection.Size on push-fit insert.

View Installation Requirements: R001               

Proviso: To be installed where light is excluded.

Note:  

Manufacturer: Arjo Hospital Equipment AB

Factor:  

Section: 1650  View Entire Section

Print this entry

WRAS Approval Number: 0806018

Trigger operated shower head with manually operated locking button incorporating a single check valve DW10 DN6.

Size: ½" BSP.

Model: Shower handle.

Marking: `Triangle` moulded into body.

View Installation Requirements: R001               

Proviso:  

Note:  

Manufacturer: Arjo Hospital Equipment AB

Factor:  

Section: 2360  View Entire Section

Print this entry

WRAS Approval Number: 1106341

Bed pan washing and disinfection machine. Flow is controlled via a solenoid valve and discharges via a type `AA` airgap arrangement. Maximum working pressure 3.0 bar & maximum supply temperature 60ºC.

Size: ½” BSP (F) Captive nut

Model: Tornado

Marking: Arjo Tornado on front. Model number, maximum working pressures and maximum working temperature on label.

View Installation Requirements: R001               

Proviso:  

Note:  

Manufacturer: Getinge Disinfection AB

Factor: Arjo Hospital Equipment AB