Section 0225

Print Entire Section

Cisterns

Fire sprinkler suction

WRAS Approval Number  1112060

Print this entry

`Firestore` range of cylindrical sectional sprinkler suction tanks constructed with pre-galvanised steel or aluminium sheets which are bolted together using spun galvanised nuts and bolts. The tank is stiffened top and bottom with a galvanised steel rolled angle. A rubber liner is fitted inside the tank. The cisterns are fitted with float operated valves which feed an AB airgap arrangement. A weir is provided with a 0.65mm² screen. Maximum working pressure 10.0 bar. Cold water use only.

Size: 3.060m to 21.390m diameter and 1.540 to 13.280m high.

Model: Firestore.

Marking: Franklin Hodge, logo and address, capacity, WRAS logo, LCPB number and capacity on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Franklin Hodge Industries Ltd

Factor:  

WRAS Approval Number  0807042

Print this entry

`1000 Fire Module` range of hot pressed GRP sectional storage cisterns incorporating an `AB` air gap with a Butyl sealant, stainless steel tie bars, nuts/bolts and washer sets and EPDM connection gaskets for the storage of water for fire sprinkler systems. Range of panel sizes : 0.5m x 0.5m, 1m x 0.5m, 1m x 1m.

Size: Upto 576,000 litres, maximum height of 3M.

Model: 1000 Fire Module.

Marking: `Dewey Waters`, contact details and product info printed on adhesive label on body.

Installation Requirements : R001 R270 R350 R280     

Note:  

Proviso:  

Manufacturer: Dewey Waters & Co Ltd

Factor:  

WRAS Approval Number  0902080

Print this entry

Range of cylindrical and curved panel rectangular shaped fire sprinkler suction tanks incorporating an `AB` air gap. Constructed from galvanized steel plates bolted with unc galvanized bolts. The roof structure is manufactured from galvanised trough decking mounted on galvanized steel purlins and beams. Cisterns are fitted with Peter Smith float operated valves of 50, 65, 75, 80, 100 and 150mm nominal bore. Cisterns with 50, 65, 75, 80 and 100mm valves are fitted with one weir 1100mm x 360mm in size whilst cisterns with 150mm valves are fitted with one weir 1500mm x 500mm in size. The weirs are provided with light boxes on the exterior of the cistern and with a 1.35mm square mesh screen.

Size: 3M³ - 1300M³ Cylindrical. 3M³ to 631M³ Rectangular.

Model: Galglass - S

Marking: Company name, address, tank capacity, installation date and other technical data printed and stamped onto a data plate on the side of the tank.

Installation Requirements : R001 R270 R350       

Note:  

Proviso:  

Manufacturer: Galglass Ltd

Factor: