Section 0255

Print Entire Section

Cisterns - WC Flushing

Rubber or Plastics - Low Level

Products within this section have been tested to the Regulators Specification for the performance of WC Suites installed after the 1st January 2001.

Products within this section have been tested to the Regulators Specification for the performance of WC Suites installed after the 1st January 2001.

WRAS Approval Number  1109426

Print this entry

Concealed dual flushing cistern with a plastic body incorporating an inlet valve and dual flush outlet valve. The cistern incorporates an AC airgap. The flush volume will be operated by a two button push button assembly. Supplied with flexible stainless steel braided hose assembly and service valve incorporated with the cistern casing. Maximum working pressure 10.0 bar. For use with cold water only.

Size: 3.5 L reduced flush volume. 6 L full flush volume.

Model: Marley Dual Flushing Cistern HFC1820

Marking: Marley Plumbing & Drainage Solutions on front panel

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer:  

Factor: Marley Plumbing and Drainage

WRAS Approval Number  1109425

Print this entry

Concealed dual flushing cistern with a plastic body incorporating an inlet valve and dual flush outlet valve. The cistern incorporates an AC airgap. The flush volume will be operated by a two button push button assembly. Supplied with flexible stainless steel braided hose assembly and service valve incorporated with the cistern casing. Maximum working pressure 10.0 bar. For use with cold water only.

Size: 3.5L reduced flush volume. 6L full flush volume.

Model: SANIT Dual Flushing Cistern (CC-150-S-FO-2V-2C).

Marking: SANIT, company name & contact details on on front panel.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer:  

Factor: Sanitartechnik Eisenberg GmbH

WRAS Approval Number  1112051

Print this entry

`Cistern 80` concealed dual flushing cistern with a white plastic body incorporating a side entry inlet valve and dual flush outlet valve, operated via a two push button assembly located at the front of the cistern. A variety of different flush plates are available.

Size: 3/8” BSP male inlet.

Model: Cistern 80 supplied with Lemon, Moon, Media, Yin Yang, Smart or Smarty flush plate.

Marking: Siamp on flush plate.

Installation Requirements : R001 R150 R270       

Note:  

Proviso:  

Manufacturer: Siamp

Factor:  

WRAS Approval Number  1201329

Print this entry

Concealed dual flushing cistern with a plastic body incorporating an inlet valve and dual flush outlet valve. The cistern incorporates an AC airgap and flexible stainless steel braided hose assembly. The flush volume is operated by a two button push assembly. Maximum working pressure 20.0 bar. For use with cold water only.

Size: 3.55 L reduced flush volume. 5.8 L full flush volume.

Model: SPEED MEC Model changed name in June 2013 to: EXPERT EVO MEC

Marking: OLI on Button

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Oliveira & Irmão, S.A.

Factor:  

WRAS Approval Number  1301003

Print this entry

Concealed dual flushing cistern with plastic body incorporating a servo assisted, diaphragm type inlet valve and pneumatically operated dual flush outlet valve. The flush volume is operated by a two push button assembly. For use with cold water only.

Size: ½” inlet valve. 2” outlet valve. 6, 5 or 4 litre full flush volume. 2.6, 3 or 4 reduced flush volume.

Model: Miniflo.

Marking: TD on top of outlet valve cap. Dudley & Thomasdudley.co.uk on underside of cistern lid.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: Thomas Dudley Ltd

Factor:  

WRAS Approval Number  1303049

Print this entry

Concealed dual flushing cistern with a plastic body incorporating an inlet valve and dual flush outlet valve. The cistern includes an AC air gap, brass isolation valve and flexible stainless steel braided hose assembly. The outlet valve operates via a 2 push button assembly. Maximum working pressure 10.0 bar. For use with cold water only.

Size: ½” Male BSP.

Model: K101

Marking: WDI ® and model on body

Installation Requirements : R001 R160 R280 R390     

Note:  

Proviso:  

Manufacturer: WDI (Xiamen) Technology Inc

Factor:  

WRAS Approval Number  1303041

Print this entry

Concealed dual flushing cistern with a plastic body, incorporating an inlet valve and dual flush outlet valve. The cistern includes an AC air gap and brass isolation valve and flexible stainless steel braided hose assembly. The outlet valve operates via a two push button assembly. Maximum working pressure 10.0 bar. Cold water use only.

Size: ½” Male BSP.

Model: K301 & K130

Marking: WDI ® and model on body

Installation Requirements : R001 R150 R280 R390     

Note:  

Proviso:  

Manufacturer: WDI (Xiamen) Technology Inc

Factor:  

WRAS Approval Number  1303048

Print this entry

Concealed cistern with a plastic body incorporating an inlet valve and dual flush outlet valve. The cistern includes an AC air gap, brass isolation valve and flexible stainless steel braided hose assembly. The outlet valve operates via a cable operated push button assembly. Maximum working pressure 10.0 bar. For cold water use only.

Size: ½” Male BSP.

Model: K201

Marking: WDI ® and model on body

Installation Requirements : R001 R150 R280 R390     

Note:  

Proviso:  

Manufacturer: WDI (Xiamen) Technology Inc

Factor:  

WRAS Approval Number  1305045

Print this entry

Range of dual flushing cisterns with a plastic body incorporating an inlet valve and dual flush outlet valve. The cistern incorporates an AC airgap. The flush volume will be operated by a two button push button assembly. Maximum working pressure 10.0 bar. For use with cold water only.

Size: ½” BSP male inlet.

Model: CC21200C, CC21200CECO, CC22200C & CC22200CECO

Marking: Opella on bottom of cistern and underside of cistern lid

Installation Requirements : R001 R150 R280 R390     

Note:  

Proviso:  

Manufacturer: Opella Limited

Factor:  

WRAS Approval Number  1306032

Print this entry

Concealed dual flushing cistern with a plastic body incorporating a bottom entry inlet valve and dual flush outlet valve providing an AC air gap arrangement. The outlet valve operates via a two button push button assembly. Maximum working pressure 10.0 bar. For use with cold water only

Size: ½” Male BSP inlet

Model: 109.720.00.1 Geberit.

Marking: Geberit on front panel and on lid. Model and date of manufacture (DD/MM/YYYY) inside the cistern.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Geberit Sales Limited

WRAS Approval Number  1102345

Print this entry

Concealed dual flushing cistern with a plastic body incorporating an inlet valve and dual flush outlet valve. The cistern incorporates an AC airgap and the flush volume is operated by a two button push assembly. Servicing valve and flexible stainless steel braided hose assembly incorporated with the cistern casing. For use with cold water only.

Size: 3.7 L reduced flush volume. 6 L full flush volume.

Model: Mepa cistern A31

Marking: MEPA A31 on adhesive label on cistern.

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer:  

Factor: Accora Ltd

WRAS Approval Number  0904080

Print this entry

`UniCompact` concealed low level WC flushing cistern with a plastic body incorporating a side entry inlet valve and dual flush outlet valve. The outlet valve is operated via a two push button assembly located in the lid of the cistern and the inlet incorporates a shut off valve. Maximum working pressure 16.0 bar.

Size: 5.6 litres.

Model: UniCompact

Marking: Wirquin moulded onto cistern lid.

Installation Requirements : R001 R280 R390       

Note: Not tested with any WC pan to date.

Proviso:  

Manufacturer:  

Factor: CME Sanitary Systems Ltd.

WRAS Approval Number  1109391

Print this entry

Concealed dual flushing cistern with a plastic body incorporating an inlet valve and dual flush outlet valve. The cistern incorporates an AC airgap. The flush volume will be operated by a two button push button assembly. Supplied with flexible stainless steel braided hose assembly and service valve incorporated with the cistern casing. Maximum working pressure 10.0 bar. For use with cold water only.

Size: 3.5 L reduced flush volume. 6 L full flush volume.

Model: Multikwik Concealed Cistern TRV1820

Marking: Multikwik on front panel

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer: Sanitaertechnik Eisenberg GmbH

Factor: Hunter Plastics Ltd

WRAS Approval Number  1103329

Print this entry

Concealed dual flushing cistern with a plastic body incorporating an inlet valve and dual flush outlet valve. The cistern incorporates an AC airgap. The flush volume will be operated by a two button push button assembly. Supplied with flexible stainless steel braided hose assembly incorporated with the cistern casing.

Size: 3.6 L reduced flush volume. 6 L full flush volume.

Model: CJ710

Marking: Oceanwell CJ710 on front panel

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer:  

Factor: OceanWell (Xiamen) Industrial Co Ltd

WRAS Approval Number  0910301

Print this entry

`OLI 74` Concealed dual flushing WC cistern (Plastic) with side inlet float operated valve (Ultra CPT) and dual flush outlet valve (Darling DD). The cistern incorporates an AC airgap. The flush volume will be operated by a two button HL pneumatic control panel situated on the flushing cistern.

Size: 3/8" BSP inlet connection.

Model: OLI 74 Concealed Flushing Cistern.

Marking: Adhesive label with manufacturers logo on control panel on cistern.

Installation Requirements : R001 R150 R280       

Note:  

Proviso:  

Manufacturer: Oliveira & Irmão, S.A.

Factor:  

WRAS Approval Number  0910300

Print this entry

`Better` Concealed dual flushing WC cistern (Plastic) with side inlet float operated valve (Ultra CPT) and dual flush outlet valve (DD Better). The cistern incorporates an AC airgap. The flush volume will be operated by a two button HL pneumatic control panel situated on the flushing cistern.

Size: 3/8" BSP inlet connection.

Model: `BETTER` Concealed Flushing Cistern.

Marking: Manufacturers logo moulded on control panel on cistern.

Installation Requirements : R001 R160 R280       

Note:  

Proviso:  

Manufacturer: Oliveira & Irmão, S.A.

Factor:  

WRAS Approval Number  1004333

Print this entry

`Multikwik` concealed dual flushing cistern with a white plastic body incorporating an inlet valve and dual flush outlet valve. The cistern incorporates an AC airgap. The flush volume will be operated by a pneumatic, two button push button assembly. Servicing valve incorporated inside casing on inlet.

Size: 3/8" BSP inlet.

Model: Multikwik Reservoir Hunter Encastre -9870.

Marking: `Multikwik’ Moulded onto cistern panels.

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer: SAS

Factor:  

WRAS Approval Number  1106336

Print this entry

Concealed dual flushing cistern with a white plastic body incorporating an inlet valve and dual flush outlet valve. The cistern incorporates an AC airgap. The flush volume will be operated by a two button push button assembly. Servicing valve incorporated inside casing on inlet.

Size: 3/8” BSP inlet.

Model: 9871 Furniture Cistern Pneumatic 0708153

Marking: 'Multikwik' on cistern panels.

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer: SAS

Factor:  

WRAS Approval Number  0904332

Print this entry

`Verso 350` dual flush concealed WC flushing cistern with polystyrene casing, 3/8” side entry float operated valve (`Compact 95L`) and 2” dual flush outlet valve (`Verso 350`). Maximum working pressure 16.0 Bar.

Size: Full flush - 5.8 litres. Reduced flush - 3.5 litres.

Model: Verso 350.

Marking: `Siamp Monaco` moulded onto bottom of cistern.

Installation Requirements : R001 R160         

Note:  

Proviso:  

Manufacturer: SIAMP

Factor:  

WRAS Approval Number  0904027

Print this entry

`Jollytank` concealed low level WC flushing cistern with a plastic body incorporating a side entry inlet valve (Wirquin) and dual flush outlet valve (Wirquin). The outlet valve is operated via a two push button assembly located in the lid of the cistern. Inlet incorporates a shut off valve. Maximum working pressure 16.0 bar.

Size: 5.6 litres.

Model: Jollytank.

Marking: Wirquin moulded onto cistern lid.

Installation Requirements : R001 R280 R390       

Note: Not tested with any WC pan to date.

Proviso:  

Manufacturer: Wirquin Plastiques

Factor: