Section 0520

Print Entire Section

Combination Tap Assemblies

Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet

Listing Number 1004013

Print this entry

2 hole, single outlet fixed combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, supplied with a range of dome, crosstop or single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with plastic backnuts.

Size: ¾" BSP inlets.

Model: PG334 - Aquations bath shower mixer. PF344-Eon bath shower mixer. PH344L with PH370-Aetha bath shower mixer. PH344L with PH371-Loop bath shower mixer. PH344L with PH361-Monet bath shower mixer. PH344L with PH352-Jupiter bath shower mixer. PH344L with P9000-Contour bath shower mixer

Marking: UF stamped into headworks.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Ultra Finishing Limited

Factor: Twyford Bathrooms

Listing Number 1007011

Print this entry

2 hole single outlet fixed combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). The spout outlet incorporates a plastic flow straightener. Supplied with backnuts. For use up to 60°C

Size: ¾" BSP male inlets.

Model: TAPMATE GALAXY TM GAL BSM C.

Marking: Bristan, ST 1207 etched into body.NEOSTRAHL etched into outlet.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

Listing Number 0912076

Print this entry

Range of 2 hole single outlet fixed combination tap assemblies (gold effect or chromium plated brass) with non rising spindle, rising spindle or ¼ turn ceramic disc headworks with a range of single lever or cross top operating members (gold effect or chromium plated brass) and a manual diverter to shower outlet. Supplied with brass backnuts, not supplied with hose or handset.

Size: ¾" BSP inlets.

Model: Pillar Bath Shower Mixers M5305 (417600) chromium plated - cross top operating members - non-rising spindle. M5305PVD (212569) gold finished - cross top operating members - non-rising spindle. M33125 (212524) chromium plated - single lever operating members - ¼ turn ceramic disc. M33125PVD (209461) gold finished - single lever operating member - ¼ turn ceramic disc. M33165 (417602/476409) chromium plated - cross top operating members - rising spindle M33165PVD (212572) gold finished - cross top operating members - rising spindle. M33265 (209458) chromium plated - cross top operating members - non-rising spindle. M9705 (209440) chromium plated - cross top operating members - ¼ turn ceramic disc.

Marking: M5305 - BS 5412 XZ20 - stamped into headwork. M5305PVD - BS5412 XZ20 - stamped into headwork. M33125 - BS5412 CD XZ20 - stamped into headwork. M33125PVD - BS 5412 CD XZ20 - stamped into headwork. M33165 - XZ etched into body M33165PVD - XZ etched into body M33265 - XZ etched into body M9705 - BS 5412 CD XZ20 - stamped into headwork.

Installation Requirements : r001 r010 r040       

Note:  

Proviso: The hose and handset used with this assembly must meet the requirements of the Water Supply (Water Fittings ) Regulations 1999.

Manufacturer: PPI Winland

Factor:  

Listing Number 1007066

Print this entry

Wall mounted 2 hole single outlet fixed combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet and shower handset both incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 3).

Size: ¾” to ½” BSP male offset union inlets.

Model: 25.023.360.

Marking: Dornbracht stamped into headworks.Dornbracht moulded onto shower handset face.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Aloys F Dornbracht GmbH & Co KG

Factor:  

Listing Number 0603043

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with ¼ turn ceramic disc headwork`s, and dome, cross top or single lever operating members (chromium plated brass). Manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: M3105. M3205. M3605.

Marking: CD XZ stamped on headworks.

Installation Requirements : R001 R006 R010 R020     

Note:  

Proviso:  

Manufacturer: Xiamen Zhongyu Hardware Industry Co Ltd

Factor: A P Townsend

Listing Number 0603041

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with non- rising spindle headwork`s, and cross top operating members (chromium plated brass). Manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: M6005.

Marking: BS5412 XZ P stamped on headwork.

Installation Requirements : R001 R006 R020 R040     

Note:  

Proviso:  

Manufacturer: Xiamen Zhongyu Hardware Industry Co Ltd

Factor: A P Townsend

Listing Number 0706017

Print this entry

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). With non-rising spindle headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: Loire/Elizabethan - bath shower mixer - manual diverter.

Marking: A.G.M stamped into headwork.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: AG Monteiro LDA

Factor:  

Listing Number 0706013

Print this entry

Deck mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). With non-rising spindle headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: Art Deco bath shower mixer - manual diverter.

Marking: A.G.M stamped into headworks.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: AG Monteiro LDA

Factor:  

Listing Number 0605035

Print this entry

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With ¼ turn ceramic disc headwork`s, dome operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (DW15/DN10). The spout outlet incorporates a stainless steel aerator.

Size: ¾" BSP to ½" BSP offset unions.

Model: 25.023.335.

Marking: `Dornbracht` etched on diverter and moulded onto the shower outlet.

Installation Requirements : R001 R020         

Note:  

Proviso:  

Manufacturer: Aloys F Dornbracht GmbH & Co KG

Factor:  

Listing Number 0609061

Print this entry

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With ¼ turn ceramic disc headwork`s, cross top operating members (chromium plated brass) and a manually operated diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (DN10/DW15). The shower handset also incorporates a single check valve cartridge (DN10/DW15).

Size: ¾" to ½" BSP offset unions.

Model: 25.023.830.

Marking: `Dornbracht` etched on diverter.`Dornbracht` moulded on shower rose.`Dornbracht` stamped on headworks.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Aloys F Dornbracht GmbH & Co KG

Factor:  

Listing Number 0605033

Print this entry

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork`s, dome operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet and handset incorporates a single check valve cartridge (DW15/DN10). The spout outlet incorporates a stainless steel aerator.

Size: ¾" to ½" offset unions.

Model: 25.133.880.

Marking: `Dornbracht` etched on spout and shower head.

Installation Requirements : R001 R020         

Note:  

Proviso:  

Manufacturer: Aloys F Dornbracht GmbH & Co KG

Factor:  

Listing Number 0702036

Print this entry

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with ¼ turn ceramic disc headwork`s, cross top or single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (Neoperl DW15/DN10). The spout outlet incorporates a stainless steel aerator.

Size: ½" x ¾" offset unions.

Model: 25.100.880 single lever operating member. 25.100.890 cross top operating member.

Marking: `Dornbracht` stamped into headworks.

Installation Requirements : R001 R020         

Note:  

Proviso:  

Manufacturer: Aloys F Dornbracht GmbH & Co KG

Factor:  

Listing Number 0607050

Print this entry

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (buffed brass) with non-rising spindle and ¾ turn disc headwork`s and cross top operating members (buffed brass) and a manual diverter to shower outlet. The showerhead sits on a telephone cradle style holder. The shower outlet incorporates a single check valve cartridge (DW20/DN15). Supplied with brass backnuts.

Size: ¾" BSP.

Model: MC4308, GA4308, R4308, GCD4308, RCD4308.

Marking: `Barber Wilsons London 1905` printed on indice.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Barber Wilsons & Co Ltd

Factor:  

Listing Number 0607049

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (buffed brass). With non- rising spindle or ¾ turn disc headwork`s, cross top operating members (buffed brass) and a manual diverter to shower outlet. The showerhead sits on a telephone cradle style holder. The shower outlet incorporates a single check valve cartridge (DW20/DN15). Supplied with brass backnuts.

Size: ¾" BSP.

Model: MC4300, GA4300, R4300, GCD4300, RCD4300.

Marking: `Barber Wilsons London 1905` printed on indice.

Installation Requirements : R001 R006 R020       

Note:  

Proviso:  

Manufacturer: Barber Wilsons & Co Ltd

Factor:  

Listing Number 0703041

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With non- rising spindle headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: 1901 bath shower mixer - N BSM C.

Marking: `Bristan Birmingham 1901` printed on indice.`U1` etched on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

Listing Number 0703086

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With non- rising spindle headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: Cardinal bath shower mixer - A BSM C WHT.

Marking: `Bristan` printed on indice and diverter operating member.`U1` etched on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

Listing Number 0703044

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With ¼ turn ceramic disc headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: Twist bath shower mixer - TW BSM C. Steele bath shower mixer - 212329. Twist bath shower mixer - TW BSM C. Steele bath shower mixer - 212329.

Marking: Twist: `Bristan` and 'UC' etched on body. Steele: 'UC' and month and year of manufacture etched on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

Listing Number 0705028

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With non- rising spindle headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: Trinity bath shower mixer - TY BSM C.

Marking: `Bristan Trinity` printed onto indice. `U1` etched into body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

Listing Number 0705047

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With non- rising spindle headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: ART Deco bath shower mixer - D BSM C.

Marking: `Bristan` etched into headwork cover.`U` etched into body.

Installation Requirements : R001 R020         

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

Listing Number 0706022

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With ¼ turn ceramic disc headwork`s, single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: Chill bath shower mixer - CL BSM C.

Marking: `Bristan` etched into base plate.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

Listing Number 0706019

Print this entry

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With ¼ turn ceramic disc headwork`s, dome operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener.

Size: ½" x ¾" offset unions.

Model: `Meridian` wall mounted bath shower mixer - MN WMBSM C.

Marking: `Bristan` etched into operating member.

Installation Requirements : R001 R030         

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

Listing Number 0702016

Print this entry

Range of two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, single lever operating members (ceramic coated) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: Renaissance Bath Shower Mixer RS BSM C & RS UN BSM C.

Marking: Renaissance : `Bristan Renaissance` printed on indice. RS UN BSM C: U0110 etched into body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: UNIPLMBG Enterprises Co Ltd

Factor: Bristan Limited

Listing Number 0512028

Print this entry

Deck mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With non-rising spindle headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: R LBSM C / G.

Marking: `Bristan Regency` printed on indice. `U` etched on rear of tap body.

Installation Requirements : R001 R020 R040       

Note:  

Proviso:  

Manufacturer: UNIPLUMBG Enterprises Co Ltd

Factor: Bristan Group Limited

Listing Number 0605027

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With ¼ turn ceramic cartridge headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: CMS BSM C.

Marking: `Bristan` etched on plinth.

Installation Requirements : R001 R006 R010 R040     

Note:  

Proviso:  

Manufacturer: M & Z Spa Rubinetteria

Factor: Bristan Group Limited

Listing Number 0702018

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with a ceramic cartridge headwork, dome operating member (chromium plated brass) and a manual diverter to shower outlet. Connection to the central spout and headwork`s is via stainless steel braided EPDM hoses with ¾" captive nut end connections. The spout outlet incorporates 2 plastic flow straighteners. Supplied with plastic backnuts.

Size: Stainless steel braided EPDM lined hose assembly with ¾" BSP captive nut end connections.

Model: Aqueous bath shower mixer - AQS SLBSM C.

Marking: `Bristan` etched on operating member.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Palazzani Rubinetteria

Factor: Bristan Limited

Listing Number 0705043

Print this entry

Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With ceramic cartridge headwork, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a stainless steel aerator.

Size: ¾" to ½" offset unions.

Model: Single lever bath filler with diverted shower connection. 8123-D11 and B053.

Marking: Mounting cover etched 8123-D11and B053.

Installation Requirements : R001 R020         

Note:  

Proviso:  

Manufacturer:  

Factor: Britain China Trading Co. Ltd

Listing Number 0512048

Print this entry

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). With non-rising spindle headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (Neoperl). Supplied with plastic backnuts.

Size: ¾" BSP.

Model: 10526 - Vienna, 10591 - Pluto, 10596 - Vega, 10734 - Victoria, 10752 - Pluto.

Marking: `Damixa` stamped on headwork.

Installation Requirements : R001 R006 R010 R020     

Note:  

Proviso:  

Manufacturer: Damixa ApS

Factor:  

Listing Number 0512046

Print this entry

Range of deck mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with non-rising spindle headwork`s, cross-top operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (DW14/DN10). The spout outlet incorporates a plastic flow straightener. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: Paris 10532, Versailles 10716.

Marking: `Damixa` etched on headwork.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Stream Tapware Corp

Factor: Damixa ApS

Listing Number 0605057

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork`s, single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (DN10/DW15). Supplied with brass backnuts.

Size: ¾" BSP.

Model: `Vienna` lever bath shower mixer 1033800.

Marking: `Damixa` stamped on headworks.

Installation Requirements : R001 R006 R040       

Note:  

Proviso:  

Manufacturer:  

Factor: Damixa Ltd

Listing Number 0803308

Print this entry

Range of two hole, single outlet (fixed), combination tap assemblies (chromium plated brass) with non-rising spindle type headworks and doom type operating members (chromium plated brass) with manual diverter to shower outlet. Outlet incorporates a plastic flow straightener. Supplied with brass backnuts. Maximum working pressure 10 bar.

Size: ¾"BSP.

Model: 10Y02.

Marking: Delica etched on operating members.

Installation Requirements : R001 R005 R030       

Note:  

Proviso:  

Manufacturer: Delica Sanitary Fitting Industrial Co Ltd

Factor:  

Listing Number 0712025

Print this entry

Two hole, single outlet (fixed) or wall mounted combination tap assembly (chromium plated brass) with a ceramic cartridge headwork, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a stainless steel aerator. Supplied with plastic backnuts.

Size: ¾" BSP or ¾" - ½" offset union inlets.

Model: CAT106 - Bath Shower Mixer

Marking: `DTC 09` etched into headworks.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Deva Tap Company (The)

Factor:  

Listing Number 0710038

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with rising spindle headworks, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: CR30.

Marking: `DTC03` etched into body.Artersall Coronation 1902 printed on indice.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Deva Tap Company (The)

Factor:  

Listing Number 0512060

Print this entry

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with rising spindle headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP inlets.

Model: CR23, 476409, 476410.

Marking: DTC03 etched on tap body.`Attersall Coronation 1902` printed on indice.

Installation Requirements : R001 R020 R040       

Note:  

Proviso:  

Manufacturer:  

Factor: Deva Tap Company (The)

Listing Number 0512059

Print this entry

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with non-rising spindle headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP inlets.

Model: VIC750, NOS750, 476405, 476406, 417605, 476413, 476414.

Marking: DTC03 etched on rear of tap body.

Installation Requirements : R001 R020 R040       

Note:  

Proviso:  

Manufacturer:  

Factor: Deva Tap Company (The)

Listing Number 0512075

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork`s, single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener.

Size: ¾" BSP.

Model: MAG 130 - CP.

Marking: `Eurobath` etched on operating member.`Eurobath England` etched on rear of tap body.

Installation Requirements : R001 R020 R040       

Note:  

Proviso:  

Manufacturer: Vado

Factor:  

Listing Number 0610045

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with non-rising spindle headwork`s and a selection of operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: AST-130-C/P, WAR-230-C/P plus kit, AVO-230-C/P plus kit, VEC-130-C/P plus kit & AST-330-C/P.

Marking: Eurobath * BS5412 * England stamped on headworks.

Installation Requirements : R001 R020         

Note:  

Proviso:  

Manufacturer: Vado

Factor:  

Listing Number 0804019

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: F24 A5808.

Marking: `Moretti` etched into body.

Installation Requirements : R001 R010 R020 R040     

Note:  

Proviso:  

Manufacturer: Shen Zhen Globe Union Industrial Corp

Factor: Globe Union Industrial Corp

Listing Number 0804017

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, dome operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (Neoperl). The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: F24 A2804.

Marking: `Moretti` etched into body.

Installation Requirements : R001 R010 R020 R040     

Note:  

Proviso:  

Manufacturer: Shen Zhen Globe Union Industrial Corp

Factor: Globe Union Industrial Corp

Listing Number 0804016

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, dome operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (Neoperl). The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: F24A2803 and F24A2701.

Marking: `Globe Union` etched into body.

Installation Requirements : R001 R010 R020 R040     

Note:  

Proviso:  

Manufacturer: Shen Zhen Globe Union Industrial Corp

Factor: Globe Union Industrial Corp

Listing Number 0804015

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (Neoperl). The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: F24 AC800.

Marking: `Moretti` etched into body.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Shen Zhen Globe Union Industrial Corp

Factor: Globe Union Industrial Corp

Listing Number 0804014

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, dome operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (Neoperl). The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: F24 A2802.

Marking: `Moretti` etched into body.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Shen Zhen Globe Union Industrial Corp

Factor: Globe Union Industrial Corp

Listing Number 0804018

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (Neoperl). The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: F24A5807 and F24A4804.

Marking: `Globe Union` etched into body.

Installation Requirements : R001 R010 R020 R040     

Note:  

Proviso:  

Manufacturer: Shen Zhen Globe Union Industrial Corp

Factor: Globe Union Industrial Corp

Listing Number 0601017

Print this entry

Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with a ceramic cartridge headwork controlling the temperature and a ceramic disc headwork controlling the flow. The flow controller incorporates a manual diverter to shower outlet and the temperature controller incorporates a safety temperature limiting button with a manual override facility. Both operating members are chromium plated plastic dome type. The shower outlet incorporates a single check valve cartridge (DW15/DN10). Both inlets are fitted with single check valve cartridges (OV15/DN10). The spout outlet incorporates a plastic aerator.

Size: ½" BSP.

Model: 34.555.

Marking: `Grohe` printed on body.`Grohe`, P144/1C stamped on aerator.`Grohe` and product information etched on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Grohe AG

Factor:  

Listing Number 0801051

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (Neoperl DW10/DN6). The spout outlet incorporates a plastic aerator. Supplied with brass backnuts

Size: ¾" BSP.

Model: Bath shower mixer - 9L 4015 CP.

Marking: `IDC` and 9L 4015 CP etched into tap body.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: IDC Manufacturing Group

Factor:  

Listing Number 0801050

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, dome operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (Neoperl DW10/DN6). The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts

Size: ¾" BSP.

Model: Bath shower mixer - 9L 4016 CP.

Marking: `IDC` and 9L 4016 CP etched into tap body.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: IDC Manufacturing Group

Factor:  

Listing Number 0801042

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (Neoperl DW10/DN6). The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts

Size: ¾" BSP.

Model: Bath shower mixer - 9L 4036 CP.

Marking: `IDC` and 9L 4036 CP etched into base plate.

Installation Requirements : R001 R005 R010 R020     

Note:  

Proviso:  

Manufacturer: IDC Manufacturing Group

Factor:  

Listing Number 0803009

Print this entry

Deck mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ceramic cartridge headworks, single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (Neoperl). The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts

Size: ¾" BSP.

Model: Bath shower mixer - 9L 4033 CP.

Marking: `IDC` and 9L 4033 CP etched into pillar flange.

Installation Requirements : R001 R006 R010 R040     

Note:  

Proviso:  

Manufacturer: IDC Manufacturing Group

Factor:  

Listing Number 0803010

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check cartridge (Neoperl). Supplied with brass backnuts.

Size: ¾" BSP.

Model: 9L4022CP.

Marking: IDC 9L4022CP etched into body.

Installation Requirements : R001 R005 R010 R040     

Note:  

Proviso:  

Manufacturer: IDC Manufacturing Group

Factor:  

Listing Number 0803011

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with rising spindle headworks, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check cartridge (Neoperl). Supplied with brass backnuts.

Size: ¾" BSP.

Model: 9L4023CP.

Marking: IDC 9L4023CP etched into body.

Installation Requirements : R001 R005 R010 R040     

Note:  

Proviso:  

Manufacturer: IDC Manufacturing Group

Factor:  

Listing Number 0801053

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) ceramic cartridge headworks and single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The shower outlet incorporates a single check valve cartridge (Neoperl DW10/DN6). The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts

Size: ¾" BSP.

Model: Bath shower mixer - 9L 4031 CP.

Marking: `IDC` and 9L 4031 CP etched into base plate.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: IDC Manufacturing Group

Factor:  

Listing Number 0804036

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with a ceramic cartridge headwork, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: 5565P (Aquanova Plus), 2465 (Neo), 5565 Open (Aquanova open), 5565 (Aquanova).

Marking: `Ramon Soler` etched into operating member.`RSY7` etched into body.

Installation Requirements : R001 R010 R020 R040     

Note:  

Proviso:  

Manufacturer: Industrias Ramon Soler SA

Factor:  

Listing Number 0804031

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with a ceramic cartridge headwork, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: 4465 (Mithos).

Marking: `Ramon Soler` etched into operating member.`RSY7` etched into body.

Installation Requirements : R001 R010 R020 R040     

Note:  

Proviso:  

Manufacturer: Industrias Ramon Soler SA

Factor:  

Listing Number 0804034

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with a ceramic cartridge headwork, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: 5555P (Aquanova Plus), 2455 (Neo), 5555 Open (Aquanova open), 5555 (Aquanova).

Marking: `Ramon Soler` etched into operating member.`RSD5` etched into body.

Installation Requirements : R001 R005 R010 R020     

Note:  

Proviso:  

Manufacturer: Industrias Ramon Soler SA

Factor:  

Listing Number 0709044

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks with dome, cross top or single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: 7" bath mixer series - JY01723.

Marking: `J` etched into body.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

Listing Number 0709033

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with non rising spindle headworks, with cross top operating member (chromium plated brass) and a manual diverter to shower outlet. Supplied with brass backnuts.

Size: ¾" BSP.

Model: 7" bath mixer - JY02204.

Marking: `J` etched into body.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

Listing Number 0709034

Print this entry

Two hole, single outlet (fixed) combination tap assemblies (either chromium plated or gold plated brass) with rising spindle headworks and cross top operating members (either chromium plated or gold plated brass) and a manual diverter to shower outlet. Supplied with brass backnuts.

Size: ¾" BSP.

Model: 7" bath mixer - JY020603 (chrome plated) & JY02603-01 (gold plated).

Marking: `Joyou` etched into body.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

Listing Number 0709036

Print this entry

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with ¼ turn ceramic disc headworks and dome/cross top/single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: 7" bath mixer series - JY04303.

Marking: `J` etched into body.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

Listing Number 0601059

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with ¼ turn ceramic disc headwork`s, single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener.

Size: ¾" BSP.

Model: Florentine 5275. Solo 6275. Kleen 19275. Angel 31275. Capri 25275. Opal 15119N.

Marking: `Jaguar` etched on operating member.

Installation Requirements : R001 R006 R020 R040     

Note:  

Proviso:  

Manufacturer: Jaguar & Company Ltd

Factor: Just Taps Plus Ltd

Listing Number 0609071

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with non- rising spindle headwork, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: Paros 700 UKPA.

Marking: SF, ID/A, NF and 6205 etched on body.

Installation Requirements : R001 R006 R040       

Note:  

Proviso:  

Manufacturer: Marco Mammoliti Spa

Factor:  

Listing Number 0609070

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with ceramic cartridge headwork`s, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: `Dezir` 1200 UKDE. Neptune 1200 UKNE. Lina 5200 UKMA.

Marking: Company logo NF 11D/A etched on body.

Installation Requirements : R001 R006 R040       

Note:  

Proviso:  

Manufacturer: Marco Mammoliti Spa

Factor:  

Listing Number 0703306

Print this entry

Range of wall mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with ceramic cartridge type headwork`s and lever operating member (chromium plated brass). The assembly incorporates a manual diverter to shower outlet. The spout outlet incorporates a plastic and stainless steel aerator. Maximum working pressure 10.0 bar.

Size: ¾", ½" BSP offset unions.

Model: 33540. 36540.

Marking: Operating lever etched manufacturers logo and manufacturers name, indice and lever operating member with manufacturers logo.

Installation Requirements : R001 R020 R040       

Note:  

Proviso:  

Manufacturer: Ottone Meloda

Factor:  

Listing Number 0603025

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With non- rising spindle headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: MOCR 108.

Marking: `Paini` etched on body and printed on indice.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Paini Spa Rubinetterie

Factor: Paini (UK) Ltd

Listing Number 0907039

Print this entry

Thermostatic mixing valve with chromium plated brass body and separate controls to operate both flow and temperature (lever operating members). The valve incorporates a self cancelling diverter to shower outlet and both inlets incorporate non-return valves not suitable for backflow prevention. Outlet incorporates a plastic flow straightener and the product is supplied with brass backnuts. Maximum working pressure 10.0 bar.

Size: ¾" BSP inlets.

Model: T555.

Marking: Pegler, logo, serial number and model number etched into body.Pegler logo printed onto indice.

Installation Requirements : R001 R006 R010 R030     

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

Factor:  

Listing Number 0605063

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With ¼ turn ceramic disc headwork`s, single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: LF001723W003E.

Marking: Manufacturer's logo etched on operating member.

Installation Requirements : R001 R005 R020       

Note:  

Proviso:  

Manufacturer: Lih Chern Metallic Enterprise Co Ltd

Factor: Roper Rhodes Ltd

Listing Number 0812008

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼turn ceramic disc headworks, a variety of operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: Wessex - 664202. Reef - 334002. Bora - 444002. Aero - 554002.

Marking: Company logo etched into spout.

Installation Requirements : R001 R006 R040       

Note:  

Proviso:  

Manufacturer: LCM Group

Factor: Roper Rhodes Ltd

Listing Number 0812009

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼turn ceramic disc headworks, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: Express bath shower mixer - 884002.

Marking: Company logo etched into body.

Installation Requirements : R001 R006 R040       

Note:  

Proviso:  

Manufacturer: LCM Group

Factor: Roper Rhodes Ltd

Listing Number 0812012

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼turn ceramic disc headworks, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: Insight bath shower mixer - 994002.

Marking: Company logo etched into body.

Installation Requirements : R001 R006 R040       

Note:  

Proviso:  

Manufacturer: LCM Group

Factor: Roper Rhodes Ltd

Listing Number 0605074

Print this entry

Decked mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With a ceramic cartridge headwork, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: 1723E.

Marking: Manufacturer's logo etched on operating member.

Installation Requirements : R001 R005 R020       

Note:  

Proviso:  

Manufacturer: Lih Chern Metallic Enterprise Co Ltd

Factor: Roper Rhodes Ltd

Listing Number 0605070

Print this entry

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With a ceramic cartridge headwork, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener.

Size: ¾" to ½" offset union.

Model: 1723.

Marking: Manufacturer’s logo etched on operating member.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Lih Chern Metallic Enterprise Co Ltd

Factor: Roper Rhodes Ltd

Listing Number 0605076

Print this entry

Two hole, single outlet (fixed) wall mounted combination tap assembly (chromium plated brass). Consisting of a ceramic cartridge headwork, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener.

Size: ¾" to ½" offset union.

Model: 1113.

Marking: Manufacturer`s logo etched on operating member.

Installation Requirements : R001 R010 R020 R040     

Note:  

Proviso:  

Manufacturer: Lih Chern Metallic Enterprise Co Ltd

Factor: Roper Rhodes Ltd

Listing Number 0605062

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). With ¼ turn ceramic disc headwork`s, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾” BSP.

Model: LF001113W003E.

Marking: Manufacturer's logo etched on operating member.

Installation Requirements : R001 R006 R020       

Note:  

Proviso:  

Manufacturer: Lih Chern Metallic Enterprise Co Ltd

Factor: Roper Rhodes Ltd

Listing Number 0605071

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with a ceramic cartridge headwork, single lever operating member (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: 1113E.

Marking: Manufacturer's logo etched on operating member.

Installation Requirements : R001 R005 R020       

Note:  

Proviso:  

Manufacturer: Lih Chern Metallic Enterprise Co Ltd

Factor: Roper Rhodes Ltd

Listing Number 0812007

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼turn ceramic disc headworks, single lever operating members (chromium plated brass) and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP.

Model: Stream bath shower mixer - 774002.

Marking: Company logo etched into operating member.

Installation Requirements : R001 R006 R040       

Note:  

Proviso:  

Manufacturer: LCM Group

Factor: Roper Rhodes Ltd

Listing Number 0710043

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with non- rising spindle headworks, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: 303-060-00 - Bath/Shower Mixer.

Marking: `Roddex` and product number etched into body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Shanghai Roddex Bath Hardware Co Ltd

Factor:  

Listing Number 0605010

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Consisting of rising spindle headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: Edwardian series R2522.

Marking: `Edwardian` stamped on indice.

Installation Requirements : R001 R006 R020       

Note:  

Proviso:  

Manufacturer: F LLi Nolli Srl

Factor: Taps International Ltd

Listing Number 0706028

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork`s, single lever operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: 3500** Bath/shower mixer (3530) with pillar unions (6387) and lever handles, traditional. ** Indicates finish variant: BZ = Bronze, CP = Chrome, CPIG = Chrome and Gold, IG = Gold, NI = Nickel, NIIG = Nickel and Gold, PF = Pewter, PFIG = Pewter and Gold.

Marking: `Avilion` stamped into headworks

Installation Requirements : R001 R005 R020       

Note:  

Proviso:  

Manufacturer: Triflow Concepts Limited

Factor:  

Listing Number 0706026

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork`s, cross top operating members (chromium plated brass) and a manual diverter to shower outlet.

Size: ¾" BSP.

Model: 3501** Bath/shower mixer (3531) with pillar unions (6387) and crosshead handles, traditional. ** Indicates finish variant: BZ = Bronze, CP = Chrome, CPIG = Chrome and Gold, IG = Gold, NI = Nickel, NIIG = Nickel and Gold, PF = Pewter, PFIG = Pewter and Gold.

Marking: `Avilion` stamped into headworks`Perrin and Rowe Mayfair` printed onto indice.

Installation Requirements : R001 R005 R020       

Note:  

Proviso:  

Manufacturer: Triflow Concepts Limited

Factor:  

Listing Number 0706029

Print this entry

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork`s, single lever operating members (chromium plated brass) and a manual diverter to shower outlet. Supplied with plastic backnuts.

Size: ¾" BSP.

Model: 3510** Bath/shower mixer (3530) with wall unions (6381) and lever handles, traditional. **Indicates finish variant: BZ = Bronze, CP = Chrome, CPIG = Chrome and Gold, IG = Gold, NI = Nickel, NIIG = Nickel and Gold, PF = Pewter, PFIG = Pewter and Gold.

Marking: `Avilion` stamped into headworks.

Installation Requirements : R001 R020