Section 0830

Print Entire Section

Cylinders

Indirectly Heated - Miscellaneous

WRAS Approval Number  0902101

Print this entry

Range of backup tanks with steel bodies and outer foam insulation incorporating a solar coil. Stores primary water only. Maximum working pressure 3.0 bar heating, 10.0 bar solar.

Size: Heating side - 1½" inlet, 1" outlet. Solar side - 1" inlet, 1" outlet.

Model: PSR500, PSR800, PSR1000.

Marking: `Sonnenkraft` printed on body. `Sonnenkraft`, product information and company details printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20o and 45oC. Where disinfection by heating is relied on to meet this obligation, information on minimum conditions for thermal disinfection of Legionella bacteria can be found on the WRAS website - www.wras.co.uk <http://www.wras.co.uk> <<http://www.wras.co.uk/>>.”

Manufacturer: Gebr Bruns GmbH

Factor: General Solar Systems GmbH

WRAS Approval Number  0902100

Print this entry

Range of backup tanks with steel bodies and outer foam insulation. Stores primary water only. Maximum working pressure 3.0 bar.

Size: 1" BSP inlet/outlet.

Model: PSC800 & PSC1000

Marking: `Sonnenkraft` printed on body. `Sonnenkraft`, product information and company details printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20o and 45oC. Where disinfection by heating is relied on to meet this obligation, information on minimum conditions for thermal disinfection of Legionella bacteria can be found on the WRAS website - www.wras.co.uk <http://www.wras.co.uk> <<http://www.wras.co.uk/>>.”

Manufacturer: Gebr Bruns GmbH

Factor: General Solar Systems GmbH

WRAS Approval Number  0902099

Print this entry

`Stratified` charging module incorporating a plate heat exchanger, a pump (solar loop), primary pump (backup tank charger), three way distributor valve, regulator and safety relief valve set at 6.0 bar. Maximum working pressure 5.5 bar.

Size: ¾" BSP inlets.

Model: Stratified charging Module SLM50.

Marking: `Sonnenkraft` and model number printed on control panel. `Sonnenkraft`, model number and product information printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20o and 45oC. Where disinfection by heating is relied on to meet this obligation, information on minimum conditions for thermal disinfection of Legionella bacteria can be found on the WRAS website - www.wras.co.uk <http://www.wras.co.uk> <<http://www.wras.co.uk/>>.”

Manufacturer: Uniblock Vertriebs - Und Produktions GmbH

Factor: General Solar Systems GmbH

WRAS Approval Number  0902098

Print this entry

Heating circuit module incorporating a circulation pump mixer block and isolation valves on both inlets and outlets. Maximum working pressure 3.0 bar at 115°C.

Size: 1" BSP inlets, 22mm outlets

Model: Heating circuit module HKM.

Marking: `Sonnenkraft` and SKSCHK1 printed on control panel. `Sonnenkraft` and SKSCHK1 printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Gebr Tuxhorn GmbH & Co KG

Factor: General Solar Systems GmbH