Section 0970

Print Entire Section

Dosing Equipment

WRAS Approval Number  1303300

Print this entry

Promax proportioning system incorporating a vertical injector (suitable for backflow protection against fluid category 5) and self-closing valve at the outlet. The inlet incorporates a strainer. Maximum working pressure 9.0 bar. For use with water up to 70°C.

Size: ¾” BSP (M)

Model: 12 Digit Code - PX = Promax. S/B = Slide/Bottom. ¼ = number of products 1 to 4. A = Airgap. 04/16 = Flow Rate 4 or 16 l/min. N = North Europe Market. 0000 = Specialised customer code relating to packaging, colours or other customer requests that do not affect the hydraulic composition, function or features.

Marking: Promax on front casing. Data label on side of casing

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: SEKO SpA

Factor:  

WRAS Approval Number  0807308

Print this entry

DQFM range of chemical dosing equipment which incorporates an AD type Air gap with injector (Jump Jet) which incorporates a self closing stop valve for vertical installation with a plastic body (Hostaform). The inlet to the injector incorporates a plastic screen mesh and a connection for removing the screen for cleaning. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. The dosing of the chemical concentration is dependant on the fitting of a dosing metering peg. Maximum working pressure 5.5 bar. Not suitable for use where the water downstream of the device is required to be wholesome.

Size: ¾" BSP (F) inlet connection.

Model: 1207298 DQFM High Flow A Gap BSP.1207299 DQFM Low Flow A Gap BSP.1207352 DQFM Low Flow A Gap 3 PreMount.

Marking: Manufacturers name on front case.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Johnson Diversey Equipment Ltd

Factor:  

WRAS Approval Number  0807307

Print this entry

QFM range of chemical dosing equipment which incorporates an AD type Air gap with injector (Jump Jet) which incorporates a self closing stop valve for vertical installation with a plastic body (Hostaform). The inlet to the injector incorporates a plastic screen mesh and a connection for removing the screen for cleaning. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. The dosing of the chemical concentration is dependant on the fitting of a dosing metering peg. Maximum working pressure 5.5 bar. Not suitable for use where the water downstream of the device is required to be wholesome.

Size: ¾"BSP (F) inlet connection.

Model: 1204130 QFM A Gap High Flow.1204132 QFM A Gap Low Flow.

Marking: Label on side of equipment showing QFM, model number, date of manufacture, front panel badged manufacturers name.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Johnson Diversey Equipment Ltd

Factor:  

WRAS Approval Number  0912079

Print this entry

J-Flex dosing system incorporating a hand held trigger assembly which controls the flow. The trigger assembly is welded onto the cleaning agent dispensing container. The cleaning agent is diluted via venturi action when the trigger is depressed. The unit is to be disposed of when the cleaning agent is exhausted. For use with Suma D10 J-Flex, Suma D2 J-Flex, Suma D3.5 J-Flex, Taski Jontec 300 J-Flex, Taski Jontec forward J-Flex, Taski Sprint Glass J-Flex, Good Sense Vent J-Flex, Taski Sani Cid J-Flex, Taski Sani 100 J-Flex, Taski Sani Des J-Flex, Taski Sprint 200 J-Flex, Taski Stride 3000, Suma Elimine X J-Flex Spr DC, JD Oxivir J-Flex, Diversey Oxivir Plus, Taski Sani 4 in 1 J-Flex. The system incorporates an approved double check valve assembly (Barberi Srl) in the hydravend hose assembly and a single check valve cartridge on the hose tap connection.

Size: Hydravend white hose with black liner, incorporating a double check valve assembly. Connected with either ¾" BSP hose union or pushfit and jubilee clip.

Model: J-Flex dosing system.

Marking: J-Flex, Johnson Diversey, cleaning agent, product information, directions for use and safety instructions printed on adhesive label attached to dispensing container.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Johnson Diversey

Factor: Johnson Diversey Equipment Ltd

WRAS Approval Number  0807322

Print this entry

DQFM and QFM ranges of chemical dosing equipment which incorporates a self closing stop valve to control the flow and a double check valve on the inlet connection. The inlet to the injector incorporates a plastic screen mesh and a connection for removing the screen for cleaning. The outlet of the injector incorporates a connection for injection of chemicals via a venturi action. The dosing of the chemical concentration is dependent on the fitting of a dosing metering peg. Maximum working pressure 5.5 bar.

Size: ¾" BSP (F) inlet connection.

Model: 1207300 DQFM High flow R-Gap BSP, 1207301 DQFM Low Flow R-Gap BSP, 1207353 DQFM Low Flow R-Gap BSP 3 Pre-Mount , 121212 Diverflow High Flow R-Gap BSP, 1212113 Diverflow Low Flow R-Gap BSP, 1204131 QFM R-Gap High Flow BSP & 1204133 QFM R-Gap Low Flow BSP.

Marking: Manufacturers name on front case.

Installation Requirements : R001           

Note: For use with the following Fluid Category 3 chemicals only; Suma Multi-Conc D2, McDonalds Lobby Care SK-conc Test, McDonald's Washroom Daily Cleaner Concentrate WCConc, Suma Star-Plus D1, Suma Stat-Plus D1-BAC, Suma BAC-Conc D10 Conc, Suma San-Conc D10.1 Conc, Room Care R1-Plus, Room Care R2-Plus, Room Care R3-Plus, Room Care R5-Plus, Room Care R5.1-Plus, Room Care R9-Plus, McDonald's All Purpose Cleaner UR-Conc, McDonald's Detergent Disinfectant DR-Conc New, McDonald's Manual Utensil Wash Det HA-Conc New, McDonald's New Design Floor Care Conc FC-Conc. Suma Force D3.5, Suma Bac D10, Brillo Cleaner Degreaser, Taski Jontec Tensol F3c, CareFree Stride 3000, CareFree Stride 2000, CareFree Stride 1000, Taski Jontec 300 F4A, Endbac, Cleaner Sanitiser, Suma Chlor D4.4 and Suma Multi D2.

Proviso:  

Manufacturer: Johnson Diversey Equipment Ltd

Factor:  

WRAS Approval Number  0809313

Print this entry

`Multiclean` pumped disinfection unit for use with geriatric bathing equipment, fed via a solenoid valve (RPE Srl) and flexible hose to a Type AB air gap which is arranged to supply a pump which then supplies the disinfectant to a hand held spray attachment. Maximum working pressure 6.0 bar.

Size: ½" BSP (M) Inlet.

Model: Arjo Multiclean.

Marking: Casing badged range name and manufacturers name.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Arjo Hospital Equipment AB

Factor: Parker Bath Ltd.

WRAS Approval Number  0902300

Print this entry

`Shwosher` automatic shower area cleanser. System consists of a management unit, which introduces a chemical into the water supply passing through the unit. The inlet incorporates a double check valve assembly and a spray head, which is fitted to the ceiling or the wall of the shower. Maximum working pressure 12.0 bar.

Size: 15mm inlet.

Model: Shwosher & Shwosher Sport.

Marking: Label with range name on front casing.

Installation Requirements : R001           

Note: The `swosher cleanser` bathroom cleaner used with this product have been assessed and found to be Fluid Category 3.

Proviso:  

Manufacturer:  

Factor: Shwoshco

WRAS Approval Number  0912318

Print this entry

Grease Guzzler MK2` fluid dosing equipment for use in assisting the breakdown of grease and fats. The flow is controlled by an Opella inlet valve and discharged via a Type `AF` air gap. For use with Bio-fluid S45. Cold water supply pressure 0.2 to 10.0 bar.

Size: ½" BSP (M).

Model: Grease Guzzler MK2.

Marking: Data plate on casing printed with Grease Guzzler, WPL and company logo.

Installation Requirements : R001 R280 R390       

Note: This appliance has a fluid 4 backflow prevention device built-in. Discharge to drain must be via a Type `AA` or `AB` air gap. Discharge from the overflow must be conspicuous.

Proviso:  

Manufacturer: WPL Ltd

Factor: