Water Fittings Directory

WRAS Approved Water Fittings

 

Section 1180

Print Entire Section

Fittings for use with Tube and Pipe

 

Couplings

 


 

WRAS Approval Number  1312079

            

Print this entry

`SANHA Press S8000RG` range of transition fittings with copper alloy bodies and EPDM `O`-rings and `SANHA Press S6000` range of press fittings with copper bodies and EPDM `O`-rings, both for use with copper pipe (manufactured in accordance with EN1057). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Size: See model/product designation

Model: 8090g - elbow 90 ° - 12mm x 3/8” BSP female to 54mm x 2” BSP female 8092g - elbow 90 ° - 12mm x 3/8” BSP male 8472g - ceiling elbow 90 ° - 12mm x ½” BSP female to 22mm x ¾” BSP female 8243g - male adaptor - 12mm x 3/8” BSP male to 108mm x 4” BSP male 8270g - female adaptor - 12mm x 3/8” BSP female to 88.9mm x 3” BSP female 8130g - tee - 12mm x ½” BSP female x 12mm to 54mm x ½” BSP female x 54mm 8096g - union female flat sealing - 12mm x ½” BSP female to 54mm x 2” BSP female 8330g - union female flat sealing - 12mm x ½” BSP female to 54mm x 2” BSP female 8333g - union male flat sealing - 12mm x 3/8” male BSP to 54mm x 2” BSP female 8359g - union flat sealing - 12mm x ½” BSP female 88.9 x 3 ½” BSP female 8246g - coupling plug - 12mm x ½” BSP female to 54mm x 2” BSP female. 8280g - coupling - 12mm x ½” BSP male to 54mm x 2” BSP male 8473g - wall plate elbow - 15mm x ½” BSP female - 22mm x ¾” BSP female 8330 - union flat seat - 12mm to 54mm RG-PF - DN25 / 28mm to DN100 / 108mm 8976g - installation set - 15mm x ½” BSP female 8980g - installation set for wall plates - 15mm x ½” BSP female 6041 - bend 45° female/female - 12mm to 108mm 6040 - bend 45° female/male - 12mm to 108mm 6001A - bend 90° female/male - 12mm to 108mm 6002A - bend 90° female/female - 12mm to 108mm 6085 - crossover - 12mm to 28mm 6086 - partial crossover - 12mm to 28mm 6130 - tee - 12mm x 15mm x 12mm to 108mm x 88.9mm x 108mmmm 6240 - reducing coupler - 14mm x 12mm to 54mm x 42mm 6243 - fittings reducer - 14mm x 12mm to 108mm x 88.9mm 6270 - straight coupling - 12mm to 108mm 6270S - slip coupling - 12mm to 88.9mm 6301 - end cap - 12mm to 108mm

Marking: 'SANHA Press S8000RG' range: SAHNA, size and DVGW on fitting body. 'SANHA Press S6000' range: SAHNA on fitting body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: SANHA Fittings Ternat

List all fittings by this manufacturer

Factor: Sanha GmbH & Co KG

List all fittings by this factor

WRAS Approval Number  1206333

            

Print this entry

Range of stainless steel press fittings with EPDM `O` rings for use with stainless steel pipe. For above ground and cold water use only. Maximum working pressure 16.0 bar.

Size: 15 mm – 108 mm

Model: Mapress

Marking: Mapress logo, size, DVGW & product information on body.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Geberit Mapress GmbH

List all fittings by this manufacturer

Factor: Geberit Sales Limited

List all fittings by this factor

WRAS Approval Number  1203054

            

Print this entry

Range of push fit fittings with brass bodies and EPDM ‘O’ rings, for use with copper and PEX tubes manufactured to BS 7291. Maximum working pressure 10.0 bar. Cold water use only.

Size: 15mm push fit.

Model: EZB10001, EZB15001, EZB18001 & EZB51001.

Marking: Size on collets. Ningbo XG Imp & Exp Co. Ltd. logo, size and WRAS on bodies.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Ningbo Comfort Hardware Co Ltd

List all fittings by this manufacturer

Factor: Ningbo XG Imp & Exp Co Ltd

List all fittings by this factor

WRAS Approval Number  1309116

            

Print this entry

`PRESS-COPPER C6000/B8000` range of crimp fittings with copper or bronze bodies incorporating black EPDM `O` rings for use with copper tube. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Size: C6270 straight coupling- 15mm to 35mm. B8275 sleeve coupling - 15mm to 28mm. B8243 straight male adaptor - 15mm x ½” BSP male to 35mm x 1 ¼” BSP male. B8270 straight female adaptor - 15mm x ½” BSP female to 35mm x 1 ¼” BSP female. B8301 end cap - 15mm to 28mm. C6002 90° bend - 15mm to 35mm. C6001 90° elbow - 15mm to 35mm. C6040 45° elbow - 15mm to 35mm. B8092 90° BSP thread - 15mm x ½” BSP male to 28mm x 1” BSP male. B8090 90° BSP thread - 15mm x ½” BSP female to 28mm x 1” BSP female. B8472 wall plate 90° - ½” BSP female x 15mm. B8240 reduction coupling - 22mm x15mm to 28mm x 22mm. C6243 reduction coupling - 18mm x 15mm to 35mm x 28mm. B8130 tee piece BSP thread - 15mm x ½” BSP female x 15mm to 35mm x ½” BSP female x 35mm. C6130 press coupling - 15mm x 15mm x 15mm to 35mm x 35mm x 35mm. C6131 reducing tee - 18mm x 15mm x 18mm to 35mm x 28mm x 35mm. C6041 45° bend - 15mm x 15mm to 35mm x 35mm.

Model: C6270 straight coupling- 15mm to 35mm. B8275 sleeve coupling - 15mm to 28mm. B8243 straight male adaptor - 15mm x ½” BSP male to 35mm x 1 ¼” BSP male. B8270 straight female adaptor - 15mm x ½” BSP female to 35mm x 1 ¼” BSP female. B8301 end cap - 15mm to 28mm. C6002 90° bend - 15mm to 35mm. C6001 90° elbow - 15mm to 35mm. C6040 45° elbow - 15mm to 35mm. B8092 90° BSP thread - 15mm x ½” BSP male to 28mm x 1” BSP male. B8090 90° BSP thread - 15mm x ½” BSP female to 28mm x 1” BSP female. B8472 wall plate 90° - ½” BSP female x 15mm. B8240 reduction coupling - 22mm x15mm to 28mm x 22mm. C6243 reduction coupling - 18mm x 15mm to 35mm x 28mm. B8130 tee piece BSP thread - 15mm x ½” BSP female x 15mm to 35mm x ½” BSP female x 35mm. C6130 press coupling - 15mm x 15mm x 15mm to 35mm x 35mm x 35mm. C6131 reducing tee - 18mm x 15mm x 18mm to 35mm x 28mm x 35mm. C6041 45° bend - 15mm x 15mm to 35mm x 35mm.

Marking: PC, DVGW, size and date of manufacture (YY/MM or MM/YY) on fitting body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: PCC GmbH

List all fittings by this factor

WRAS Approval Number  1302023

            

Print this entry

Range of polymer push fit fittings for use with WIS 4-32-19 Type A barrier pipe for below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Size: 25mm

Model: E11615, E11616, E11617, E11618 & E11619.

Marking: Size, (metric and imperial), PE-AL-PE-A & Talbot England on fitting body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Atlantic Plastics Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1112064

            

Print this entry

`Supreme S16` range of compression fittings with polypropylene bodies and EPDM seals for use with PE100 pipe. For use above and below ground. Maximum working pressure 16.0 bar. For cold water use only.

Size: 20mm - 110mm.

Model: Supreme S16.

Marking: Supreme, size, Made in Italy and product information on compression nut.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Sab SpA

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1112074

            

Print this entry

Comer range of ABS and uPVC fittings for jointing via solvent cement. UPVC Fittings are for use with PVC Metric (EN1452-2) and PVC Imperial (EN1452-2) pipe. ABS fittings are for use with ABS Imperial (BS5391 Part 1) pipe. For above ground and cold water use only. Maximum working pressure: 3/8" - 6" and 16mm - 160mm - 15.0 bar. 8" to 10" - 9.0 bar. 200mm to 315mm - 10.0 bar.

Size: 

Model: uPVC Fittings BE30 (90° Bend) 20mm - 110mm. EY50 (45° Elbow) 16mm - 225mm. TE40 (90° Tee) 16mm - 225mm. EL50 (90° Elbow) 16mm - 225mm. TR40 (90° Tee reduced) 20x16 - 160x140. SO10 (Socket)16 - 225 RP20 (Reducing piece M/F) 20mm x 25mm x 16mm - 140mm x 160mm x 140mm. RS10 (Reducing Socket) 20mm x16mm - 225mm x 200mm. RB90 (Reducing bush M/F) 20mm x16mm - 225mm x 200mm. CA70 (Cap) 16mm - 225mm. CR30 (90°Cross) 20mm - 110mm. ST10 (Stub flat) 20mm - 225mm. ST20 (Stub serrated) 20mm - 225mm. HN60 (Hose adaptor) 12mm - 63mm. TY40 (45° Tee) 20mm - 110mm. BR00 (Loose flange) DN 8063 PN 1-0 - 16 - 20 - 225 FF00 (Fixed flange) 20mm - 110mm. NU80 (Nut for unions) 16mm - 110mm. BF00 (Blind flange) DN 8063 - 20 - 225. UE80 (Union end for UN80/UN82) 16mm - 110mm. UB80 (Union bush for UN80) 16mm - 110mm. EL52 (90° Elbow plain/threaded) 16mm x 3/8” - 110mm x 4”. EY52 (45° Elbow plain/threaded) 16mm x 3/8” - 110mm x 4. AD12 (Adaptor with male threading) 12mm x 16mm x 3/8” - 110mm x 125mm x5”. TE42 (90° Tee with threaded centre branch) 16mm x 3/8” - 110mm x 4”. SO12 (Socket plain/threaded) 16mm x 3/8” - 125mm x 5”. AD22 (Adaptor with male thread) 90mm x 3” - 160mm x6”. RB92 (Adaptor reducing bush M/F thread) 25mm x ½” - 110mm x 3” TR42 (90° Tee reduced plain/thread) 25mm x ½” - 63mm x 1½”. SF12 (Adaptor with female thread) 16mm x 3/8” - 110mm x 4”. EL57 (90° Elbow with metal reinforcing ring) 20mm x ½” - 63mm x 2”. TE47 (90° Tee with metal reinforcing ring) 20mm x ½” - 63mm x 2”. SF17 (Adaptor with metal reinforcing ring) 20mm x ½” - 63mm x 2”. SO17 (Socket with metal reinforcing ring) 20mm x ½” - 63mm x 2”. EL50 (90° Elbow) 250mm - 315mm. TE40 (90° Tee) 250mm - 315mm. RB90 (Reducing bush) 250mm x 160mm - 315mm x 280mm. BR00 (Loose flange) DN 8063 PN 10 - 16 - 250 - 315 EY50 (45° Elbow) 250mm - 315mm. SO10 (Socket) 250mm - 315mm. ST20 (Stub serrated) 250mm - 315mm. TR40 (90° Tee reduced) 250mm x 110mm - 250mm x 200mm. BE33 (90° Bend) ½” - 4”. EY53 (45° Elbow) 3/8” - 8”. EL53 (90° Elbow) 3/8” - 8”. TE43 (90° Tee) 3/8” - 8”. TR43 (90° Tee reduced) ¾” x ½” - 4” x 3”. SO13 (Socket) 3/8” - 8”. RB93 (Reducing bush) ½” x 3/8” - 8” x 6”. ST23 (Stub serrated) ½” - 8”. CA73 (Cap) 3/8” - 8”. CR33 (Cross 90°) ½” - 2”. TY43 (45° Tee) ½” - 2”. RS13 (Reducing socket) ¾” x ½” - 4” x 3”. HN63 (Hose adaptor) 3/8” - 2”. NU83 (Nut for unions) 3/8” - 4”. UB83 (Union bush for UN83) 3/8” - 4”. FF03 (Fixed flange drilled BS class E) 1¼” - 4”. UE83 (Union end for UN83/UN84) 3/8” - 4”. FF06 (Fixed flange drilled PN16) ½” - 4”. BF03 (Blind flange drilled BS class E) 1¼” - 4”. EL54 (90° Elbow plain/thread) 3/8” x 3/8” - 4” x 4”. TE44 (90° Tee with threaded centre branch) 3/8” x 3/8” - 4” x 4”. AD14 (Adaptor with male thread) ½” x ¾” x ½” - 4” x 5” x 5”. EY54 (45° Elbow plain/thread) 3/8” x 3/8” - 4” x 4”. SO14 (Socket adaptor plain BS/thread) 3/8” x 3/8” - 4” x 4”. SF14 (Adaptor with female thread) 3/8” x 3/8” - 4” x 4”. AD24 (Adaptor with male thread) 3” x 3” - 4” x 4”. RB94 (Adaptor reducing bush) ¾” x ½” - 4” x 3”. SO15 (Socket adaptor plain metric/plain BS) 20mm x ½” - 160mm x 6”. EL58 (90° Elbow with metal reinforcing ring) ½” x ½” - 2” x 2”. SO18 (Socket with metal reinforcing ring) ½” x ½” - 2” x 2”. SF18 (Adaptor with metal reinforcing ring) ½” x ½” - 2” x 2”. TE48 (90° Tee with metal reinforcing ring) ½” x ½” - 2” x 2”. EL53 (90° Elbow) 10”. TE43 (90° Tee) 10”. ST23 (Stub serrated) 10”. EY53 (45° Elbow) 10”. SO13 (Double socket) 10”. RB93 (Reducing bush) 10” x 8”. EL51 (90° Elbow threaded) 3/8” - 4”. EY51 (45° Elbow threaded) 3/8” - 4”. CA71 (Cap threaded) 3/8” - 4”. SO11 (Socket threaded) 3/8” - 4”. TE41 (90° Tee threaded) 3/8” - 4”. NI61 (Nipple threaded) 3/8” - 4”. NR61 (Reducing nipple threaded) ½” x 3/8” - 4” x 3”. RB91 (Reducing bush threaded) ¾” x ½” - 4” x 3”. RE61 (Reducer M/F thread) ½” x 3/8” - 4” x 3”. HN61 (Hose adaptor threaded) ¼” - 2”. RE21 (Reducer F/M threaded) 3/8” x ½” - 3” x 4”. PL71 (Plug threaded) 3/8” - 4”. RS11 (Reducing socket threaded) ½” x 3/8” - 4” x 3”. UB81 (Union bush for UN81 threaded) 3/8” - 4”. FF01 (Fixed flange threaded) ½” - 4”. NU91 (Nut threaded) 3/8” - 4”. UE81 (Union bush for UN81 threaded) 3/8” - 4”. ABS Fittings ABS ABE33 (90° Bend) ½” - 4”. AEY53 (45° Elbow) 3/8” - 8”. AEL53 (90° Elbow) 3/8” - 8”. ATE43 (90° Tee) 3/8” - 8”. ATR43 (90° Tee reduced) ¾” x ½” - 4” x 3”. AS013 (Socket) 3/8” - 8”. ARB93 (Reducing bush M/F) ¾” x ½” - 8” x 6”. AST23 (Stub serrated) ½” - 8”. ACA73 (Cap) 3/8” - 8”. ACR33 (90° Cross) ½” - 2”. ATY43 (45° Tee) ½” - 2”. ARS13 (Reducing socket) ¾” x ½” - 4” x 3”. AHN63 (Hose nozzle) 3/8” - 2”. ANU83 (Nut for unions) 3/8” - 4”. AUB83 (Union bush for AUN83) 3/8” - 4”. AFF03 (Fixed flange drilled BS class E) 1½” - 4”. AUE83 (Union end for AUN83/AUN84) 3/8” - 4”. AFF06 (Fixed flange drilled PN16) ½” - 4”. ABF03 (Bind flange chilled BS class E) 1½” - 4”. AEL54 (90° Elbow plain/threaded) ½” x ½” - 4” x 4”. ATE44 (90° Tee with threaded centre branch) ½” x ½” - 4” x 4”. AAD14 (Adaptor with male threading) ½” x ¾” x ½ - 4” x 5” x 5”. AEY54 (45° Elbow plain/threaded) ½” x ½” - 4” x 4”. ASO14 (Socket adaptor plain BS/threaded) ½” x ½” - 4” x 4”. ASF14 (Adaptor with female threading) ½” x ½” - 4” x 4”. AAD24 (Adaptor with male threading) 3” x 3” - 4” x 4”. ARB94 (Adaptor reducing bush) ¾” x ½” - 4” x 3”. ASO15 (Socket adaptor plain metric/plain BS) 20 x ½” - 160 x 6”. AEL58 (90° Elbow with metal reinforcing ring) ½” x ½” - 2” x 2”. ASF18 (Adaptor with metal reinforcing ring) ½” x ½” - 2” x 2”. ATE48 (90° Tee with metal reinforcing ring) ½” x ½” - 2” x 2”. ASO18 (Socket with metal reinforcing ring) ½” x ½” - 2” x 2”. AEL51 (90° Elbow threaded) 3/8” - 4”. AEY51 (45° Elbow threaded) 3/8” - 4”. ACA71 (Cap threaded) 3/8” - 4”. ANR61 (Reducing nipple threaded) ½” x 3/8” - 4” x 3”. ASO11 (Socket threaded) 3/8” - 4”. ATE41 (90° Tee threaded) 3/8” - 4”. ANI61 (Nipple threaded) 3/8” - 4”. ARB91 (Reducing bush threaded) ¾” x ½” - 4” x 3”. ARE21 (Reducer female-male threaded) 3/8” x ½” - 3” X 4”. APL71 (Plug threaded) 3/8” - 4”. AHN61 (Hose nozzle threaded) ¼” - 2”. ARE61 (Reducer male-female threaded) ½” x 3/8” - 4” X 3”. ARS11 (Reducing socket threaded) ½” x 3/8” - 4” x 3”. ANU91 (Nut threaded) 3/8” - 4”. AUB81 (Union bush for UN81 threaded) 3/8” - 4”. AUE81 (Union bush for UN81 threaded) 3/8” - 4”.

Marking: Comer and product information and size on body of fitting.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Comer Spa

List all fittings by this manufacturer

Factor: Epco Limited

List all fittings by this factor

WRAS Approval Number  1112071

            

Print this entry

Range of stainless steel press fittings with EPDM `O` rings for use with stainless steel pipe (A- 316L). For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Size: 15mm to 108mm.

Model: Straight Coupling press x 2200.00: 15 x 15 - 108 x 108.T. Coupling 3 x press 2200.10: 15 x 108. Sleeve Coupling press x press 2200.04: 15 x 15 - 108 x 108. Flange with press joint 2200.40: 15 x 108. Bend 90° press x press 2200.20: 15 x 15 - 108 x 108. Bend 90° Ø x press 2200.24: Ø15 x 15 - Ø108 x 108. Bend 45° press x press 2200.27: 18 x 18 - 108 x 108. Bend 45° Ø x press 2200.28: Ø15 x 15 - Ø108 x 108. Straight coupling reduction Ø x press 2200.43: Ø18 x 15 x Ø108 x 88.9. T coupling press x female x press 2200.12: 15 x ½ x 15 x 108 x 108. T coupling reduction 3 x press 2200.11: 18 x 15 x 18 - 108 x 88.9 x 108. Joint connector female x press 2200.07: ½ x 15 - 2½ x 76.1. Straight adapter male x press 2200.01: ½ x 15 - 3 x 88.9. Straight adapter female x press 2200.02: ½ x 15 - 2½ x 76.1. Elbow transition female x 2200.32: ½ x 15 - 1¼ x 35. Elbow transition male x press 2200.31: ½ x 15 - 2 x 54. Wallplate female x press 2200.23: ½ x 15 - 1 x 28. Bend 2 pieces 2200.34: ½ x 15 - 1 x 22. By pass bend Ø x press 2200.36P: Ø15 x 15 - Ø 22 x 22. Straight By Pass Ø x Ø 2200.39: Ø15 x Ø15 - Ø28 x Ø28.End cap press 2200.41: 15 x 108. Bend 15° Ø x Ø 2200.26: Ø28 x Ø28 - Ø54 X Ø54. Bend 30° Ø28 x Ø28 - Ø54 x Ø54. Bend 60° Ø28 x Ø28 - Ø54 x Ø54. Bend 90° Ø15 x Ø15 - Ø54 x Ø54.

Marking: Factorinox logo “F”, size and product information on body of fittings.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Factorinox SA

List all fittings by this manufacturer

Factor: Instalpress Europe SL

List all fittings by this factor

WRAS Approval Number  1403316

            

Print this entry

Range of pushfit fittings with plastic bodies for use with PE pipe manufactured to BS EN 12201-2:2003. For above ground and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Size: 20mm & 25mm.

Model: UG101B, UG102B, UG201B, UG202B, UG222025B, UG222525B, UG301B, UG302B, UG401B, UG402B, UG4501B, UG4502B, UG4620B, UG4625B, UG501B, UG801E, UG802E, UGPWB1514, UGPWB2014, UGPWB2514, UGPWB2516, UTS147-DB, UTS197-DB.

Marking: PN, JG and size on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: John Guest Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1403317

            

Print this entry

Range of pushfit fittings with plastic bodies for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Cold water use only.

Size: 15mm & 22mm.

Model: UG601B, UG602B, UG603B, UTS147-DB, UTS197-DB.

Marking: PN, JG and size on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: John Guest Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1111322

            

Print this entry

Range of black polyethylene electrofusion fittings for use with PE 80 and PE 100 pipe. For above and below ground cold water use only. Maximum working pressure 16.0 bar.

Size: DN20 - DN315

Model: 49010 Coupler: 20mm - 315mm. 49011 Reducing Coupler: 25mm x 20mm - 180 mm x 125mm. 49110 Long Coupler: 32mm x 63mm. 49040 Tee: 20mm - 250mm. 49127 Reducing Tee: 25mm x 20mm x 25mm - 250mm x 110mm x 180mm. 49140 Flanged Tee: 90mm x 80mm x 90mm - 180mm x 100mm x 180mm. 49120 Elbow 90°: 20mm - 250mm. 49940 Elbow 40°: 32mm - 250mm. 49050 Elbow 22.5°: 90mm - 180mm. 49060 Adjustable Elbow: 110mm - 180mm. 49020 End Cap: 20mm - 315mm. 49150 Spigot End Plug: 20mm - 315mm. 49470 Duck Foot Elbow 90°: 90mm.

Marking: Plasson & size on Body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Plasson Ltd

List all fittings by this manufacturer

Factor: Plasson (UK) Ltd

List all fittings by this factor

WRAS Approval Number  1206334

            

Print this entry

Range of copper press fittings with either CIIR or EPDM `O` rings, for use with copper pipe. For above ground and cold water use only. Maximum working pressure 16.0 bar.

Size: 15 mm - 108 mm

Model: Mapress

Marking: Mapress logo, size, DVGW & product information on body.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Geberit Mapress GmbH

List all fittings by this manufacturer

Factor: Geberit Sales Limited

List all fittings by this factor

WRAS Approval Number  1209069

            

Print this entry

Range of pipe couplings and repair clamps with stainless steel bodies and EPDM seals for use with steel and ductile iron pipe. Maximum working pressures: Axiflex 21.3mm = 16.0 bar, 38mm = 16.0 bar, 600mm = 16.0 bar, 1200mm = 10.0 bar, 1600mm = 10.0 bar & 2000mm = 6.0 bar. Axiflex Repair 48mm = 16.0 bar, 600 = 16.0 bar, 1000mm = 16.0 bar, 1200mm = 10.0 bar, 1600mm = 10.0 bar & 2000mm = 6.0 bar. Cold water use only, above and below ground.

Size: 21.3mm - 2000mm.

Model: Axiflex & Axiflex Repair.

Marking: Teekay, Axiflex, size, pressure & serial numbers on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Teekay Couplings

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1206065

            

Print this entry

Multi/Joint 3000 range of restraint couplings and restraint flange adapters with red epoxy coating and ductile iron bodies with EPDM seals, for use with PVC, Ductile Iron, PE and steel pipes for above and below ground use. Cold water use only. Maximum working pressure: DN50 - 16.0bar and DN65-DN300 - 10.0bar.

Size: MJ3007 50 x 50Straight CouplingMJ3007 65 x 65Straight CouplingMJ3007 80 x 80Straight CouplingMJ3007 100 x 100Straight CouplingMJ3007 125 x 125Straight CouplingMJ3007 150 x 150Straight CouplingMJ3007 200 x 200Straight CouplingMJ3007 225 x 225Straight CouplingMJ3007 250 x 250Straight CouplingMJ3007 300 x 300Straight CouplingMJ300+ 50 x 50Straight CouplingMJ3007 65 x 65Straight CouplingMJ3007 80 x 80 Straight CouplingMJ3007 100 x 100Straight CouplingMJ3007 125 x 125Straight CouplingMJ3007 150 x 150Straight CouplingMJ3007 200 x 200Straight CouplingMJ3007225 x 225Straight CouplingMJ3007 250 x 250Straight CouplingMJ3007 300 x 300Straight CouplingMJ3087 50 x 63 Spigot CouplingMJ3087 100 x 110Spigot CouplingMJ3087 150 x 160Spigot CouplingMJ3087 200 x 200 Spigot CouplingMJ3087 50 x 63Spigot CouplingMJ3087 100 x 110 Spigot CouplingMJ3087 150 x 160 Spigot CouplingMJ3087 200 x 200 Spigot CouplingMJ3180 80 x 110 Spigot CouplingMJ3180 80 x 110 Spigot CouplingMJ3187 80 x 110 Spigot CouplingMJ3187 80 x 110 Spigot CouplingMJ3057 50M x 50Flange AdapterMJ3057 65M x 65Flange AdapterMJ3057 80 x 80Flange AdapterMJ3057 125 x 125 Flange AdapterMJ3057 150 x 150 Flange AdapterMJ3057200x 200 Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 50 x 50Flange AdapterMJ3057 65 x 65Flange AdapterMJ3057 80 x 80Flange AdapterMJ3057 100 x 100Flange AdapterMJ3057 125 x 125Flange AdapterMJ3057 150 x 150Flange AdapterMJ3057 200 x 200Flange AdapterMJ3057 2200 x 200Flange AdapterMJ3057 250 x 250Flange AdapterMJ3057 250 x 250Flange AdapterMJ3057 300 x 300Flange AdapterMJ3057 300 x 300Flange AdapterMJ3057 80M x 80Flange AdapterMJ3057 100 x 100Flange AdapterMJ3057 150 x 150Flange AdapterMJ3057 200 x 200Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300Flange AdapterMJ3057 80 x 80 Flange AdapterMJ3057 100 x 100Flange AdapterMJ3057 150 x 150Flange AdapterMJ3057 200 x 200 Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 200x 200Flange AdapterMJ3057 50 x 50 Flange AdapterMJ3057 65 x 65 Flange AdapterMJ3057 80 x 80 Flange AdapterMJ3057 100 x 100 Flange AdapterMJ3057 125 x 125 Flange AdapterMJ3057 150 x 150 Flange AdapterMJ3057 200 x 200 Flange AdapterMJ3057 200 x 200 Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 80 x 80 Flange AdapterMJ3057 100 x 100Flange AdapterMJ3057 150 x 150 Flange AdapterMJ3057 200 x 200 Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 80 x 80 Flange AdapterMJ3057 100 x 100 Flange AdapterMJ3057 150 x 150 Flange AdapterMJ3057 200 x 200 Flange AdapterNJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 80 x 80 Flange AdapterMJ3057 100 x 100 Flange AdapterMJ3057 150 x 150 Flange AdapterMJ3057 200 x 200 Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 50 x 50 Flange AdapterMJ3057 65 x 65 Flange AdapterMJ3057 80 x 80 Flange AdapterMJ3057 x 100 x 100 Flange AdapterMJ3057 125 x 125Flange AdapterMJ3057 150 x 150 Flange AdapterMJ3057 200 x 200 Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3207 50 x Blind End CapMJ3207 65 x Blind End CapMJ3207 80 x Blind End CapMJ3207 10 x BlindEnd CapMJ3207 125 x Blind End CapMJ3207 150 x Blind End CapMJ3207 200 x Blind End CapMJ3207 225 x Blind End CapMJ3207 250 x Blind End CapMJ3207 300x Blind End CapMJ3207 50 x Blind End CapMJ3207 65 x Blind End CapMJ3207 80 x Blind End CapMJ3207 100 x Blind End CapMJ3207 125 x Blind End CapMJ3207 150 x Blind End CapMJ3207 200 x Blind End CapMJ3207 225 x Blind End CapMJ3207 250 x Blind End CapMJ3207 300 x Blind End CapMJ3207 50 x ¾" BSPEnd CapMJ3207 50 x 1" BSPEnd CapMJ3207 50 x 1¼" BSPEnd CapMJ3207 50 x 1½" BSPEnd CapMJ3207 50 x 2" BSPEnd CapMJ3207 65 x ¾" BSPEnd CapMJ3207 65M x 1" BSPEnd CapMJ3207 65M x 1½" BSPEnd CapMJ3207 65x 1½" BSPEnd CapMJ3207 65 x 2" BSPEnd CapMJ3207 80 x ¾" BSPEnd CapMJ3207 80 x 1" BSPEnd CapMJ3207 80 x 1¼" BSPEnd CapMJ3207 80 x 1½" BSPEnd CapMJ3207 80 x 2" BSPEnd CapMJ3207 100 x ¾" BSPEnd CapMJ3207 100 x 1" BSPEnd CapMJ3207 100 x 1¼" BSPEnd CapMJ3207 100 x 1½" BSPEnd CapMJ3207 100 x 2" BSPEnd CapMJ3207 125 x ¾" BSPEnd CapMJ3207 125 x 1" BSPEnd CapMJ3207 125x 1¼" BSPEnd CapMJ3207 125 x 1½" BSPEnd CapMJ3207 125 x 2" BSPEnd CapMJ3207 150 x ¾" BSPEnd CapMJ3207 150 x 1" BSPEnd CapMJ3207 150 x 1¼" BSPEnd CapMJ3207 150 x 1½" BSPEnd CapMJ3207 150 x 2" BSPEnd CapMJ3207 200 x ¾" BSPEnd CapMJ3207 200 x 1" BSPEnd CapMJ3207 200 x 1¼" BSPEnd CapMJ3207 200 x 1½" BSPEnd CapMJ3207 200 x 2" BSPEnd CapMJ3207 250 x ¾" BSPEnd CapMJ3207 250 x 1" BSPEnd CapMJ3207 250 x 1¼" BSPEnd CapMJ3207 250 x 1½" BSPEnd CapMJ3207 250 x 2" BSPEnd CapMJ3207 300 x ¾" BSPEnd CapMJ3207 300 x 1" BSPEnd CapMJ3207 300 x 1¼" BSPEnd CapMJ3207 300 x 1½" BSPEnd CapMJ3207 300 x 2" BSPEnd CapMJ3207 225 x ¾" BSPEnd CapMJ3207 225 x 1" BSPEnd CapMJ3207 225 x 1¼" BSPEnd CapMJ3207 225 x 1½" BSPEnd CapMJ3207 225 x 2" BSPEnd CapMJ3207 50M x ¾" BSPEnd CapMJ3207 50 x 1" BSPEnd CapMJ3207 50 x 1¼" BSPEnd CapMJ3207 50 x 1½" BSPEnd CapMJ3207 50M x 2" BSPEnd CapMJ3207 65 x ¾" BSPEnd CapMJ3207 65 x 1" BSPEnd CapMJ3207 65 x 1¼" BSPEnd CapMJ3207 65 x 1½" BSPEnd CapMJ3207 65 x 2" BSPEnd CapMJ3207 80 x ¾" BSPEnd CapMJ3207 80 x 1" BSPEnd CapMJ3207 80 x 1¼" BSPEnd CapMJ3207 80 x 1½" BSPEnd CapMJ3207 80 x 2" BSPEnd CapMJ3207 100 x ¾" BSPEnd CapMJ3207 100 x 1" BSPEnd CapMJ3207 100 x 1¼" BSPEnd CapMJ3207 100 x 1½" BSPEnd CapMJ3207 100 x 2" BSPEnd CapMJ3207 125 x ¾" BSPEnd CapMJ3207 125 x 1" BSPEnd CapMJ3207 125 x 1¼" BSPEnd CapMJ3207 125 x 1½" BSPEnd CapMJ3207 125 x 2" BSPEnd CapMJ3207 150M x ¾" BSPEnd CapMJ3207 150M x 1" BSPEnd CapMJ3207 150M x 1¼" BSPEnd CapMJ3207 150M x 1½" BSPEnd CapMJ3207 150M x 2" BSPEnd CapMJ3207 200M x ¾" BSPEnd CapMJ3207 200M x 1" BSPEnd CapMJ3207 200M x 1¼" BSPEnd CapMJ3207 200M x 1½" BSPEnd CapMJ3207 200M x 2" BSPEnd CapMJ3207 250M x ¾" BSPEnd CapMJ3207 250M x 1" BSPEnd CapMJ3207 250M x 1¼" BSPEnd CapMJ3207 250M x 1½" BSPEnd CapMJ3207 250M x 2" BSPEnd CapMJ3207 300M x ¾" BSPEnd CapMJ3207 300M x 1" BSPEnd CapMJ3207 300M x 1¼ BSPEnd CapMJ3207 300M x 1½" BSPEnd CapMJ3207 300M x 2" BSPEnd CapMJ3207 225M x ¾" BSPEnd CapMJ3207 225M x 1" BSPEnd CapMJ3207 225M x 1¼" BSPEnd CapMJ3207 225M x 1½" BSPEnd CapMJ3207 225M x 2" BSPEnd CapMJ3107 65 x 50 Reduction CouplingMJ3107 80x 65Reduction CouplingMJ3107 100 x 80Reduction CouplingMJ3107 125Mx 100Reduction CouplingMJ3107 150 x 100Reduction CouplingMJ3107 150 x 125Reduction CouplingMJ3107 200 x 150Reduction CouplingMJ3107 225 x 200Reduction CouplingMJ3107 250 x 225Reduction CouplingMJ3107 300 x 250Reduction CouplingMJ3107 65 x 50Reduction CouplingMJ3107 80 x 65Reduction CouplingMJ3107 100 x 80Reduction CouplingMJ3107 125 x 100Reduction CouplingMJ3107 150 x 100Reduction CouplingMJ3107 150 x 125Reduction CouplingMJ3107 200 x 150Reduction CouplingMJ3107 225 x 200Reduction CouplingMJ3107 250 x 225Reduction CouplingMJ3107 300 x 250Reduction CouplingMJ3150 50 x 40Reduced Flange AdapterMJ3150 65 x 80Reduced Flange AdapterMJ3150 100 x 80Reduced Flange AdapterMJ3150 125 x 100 Reduced Flange AdapterMJ3150 125 x 150Reduced Flange AdapterMJ3150 225 x 200 Reduced Flange AdapterMJ3150 225 x 200Reduced Flange AdapterMJ3150 225 x 250Reduced Flange AdapterMJ3150 225 x 250 Reduced Flange AdapterMJ3150 50 x 40Reduced Flange AdapterMJ3150 65 x 80 Reduced Flange AdapterMJ3150 100 x 80 Reduced Flange AdapterMJ3150 125 x 100 Reduced Flange AdapterMJ3150 125 x 150 Reduced Flange AdapterMJ3150 225 x 200 Reduced Flange AdapterMJ3150 225 x 200 Reduced Flange AdapterMJ3150 225 x 250 Reduced Flange AdapterMJ3150 225 x 250 Reduced Flange AdapterMJ3157 225 x 200Reduced Flange AdapterMJ3157 225 x 250 A2 Reduced Flange AdapterMJ3157 50 x 40 Reduced Flange AdapterMJ3157 65 x 80 Reduced Flange AdapterMJ3157 100 x 80 Reduced Flange AdapterMJ3157 125 x 100Reduced Flange AdapterMJ3157 125 x 150Reduced Flange AdapterMJ3157 225 x 200 Reduced Flange AdapterMJ3157 225 x 200Reduced Flange AdapterMJ3157 225 x 250Reduced Flange AdapterMJ3157 225 x 250Reduced Flange AdapterMJ3157 50 x 40Reduced Flange AdapterMJ3157 65 x 80Reduced Flange AdapterMJ3157 100 x 80Reduced Flange AdapterMJ3157 125 x 100Reduced Flange AdapterMJ3157 125 x 150Reduced Flange AdapterMJ3157 225 x 200Reduced Flange AdapterMJ3157 225 x 200 A2 EReduced Flange AdapterMJ3157 225 x 250 Reduced Flange AdapterMJ3157 225 x 250 Reduced Flange AdapterMJ3157 65 x 80 Reduced Flange AdapterMJ3157 100 x 80 Reduced Flange AdapterMJ3157 125 x 100 Reduced Flange AdapterMJ3157 125 x 150 Reduced Flange AdapterMJ3157 225 x 200 Reduced Flange AdapterMJ3157 225 x 250 Reduced Flange AdapterMJ3400 80 x 80BendMJ3400 100 x 100BendMJ3400 150 x 150 BendMJ3400 80 x 80 BendMJ3400 100 x 100 BendMJ3400 150 x 150 BendMJ3407 80 x 80 BendMJ3407 100 x 100 BendMJ3407 150 x 150BendMJ3407 80 x 80 BendMJ3407 100 x 100BendMJ3407 150 x 150BendMJ3450 80Fx 80 x 2" BSPDuckfootMJ3450 80F x 80 DuckfootMJ3450 100F x 100DuckfootMJ3450 100F x 100 x 2" BSPDuckfootMJ3450 80 x 80FL x 2" BSPDuckfootMJ3450 80 x 80 DuckfootMJ3450 100 x 100 DuckfootMJ3450 100 x 100 x 2" BSPDuckfootMJ3457 80 x 80 x 2" BSPDuckfootMJ3457 80 x 80 DuckfootMJ3457 100 x 100DuckfootMJ3457 100 x 100 x 2" BSPDuckfootMJ3457 80 x 80 x 2" BSPDuckfootMJ3457 80 x 80 DuckfootMJ3457 100 x 100 DuckfootMJ3457 100 x 100 x 2" BSPDuckfootMJ3550 100 x 80 x 2" BSPDuckfootMJ3550 100 x 80 DuckfootMJ3550 150 x 100 DuckfootMJ3550 150 x 100 x 2" BSPDuckfootMJ3550 100 x 80 x 2" BSPDuckfootMJ3550 100 x 80 DuckfootMJ3550 150 x 100 DuckfootMJ3550 150 x 100 x 2" BSPDuckfootMJ3557 50 x 80 DuckfootMJ3557 50 x 80 x 2" BSPDuckfootMJ3557 100 x 80 x 2" BSPDuckfootMJ3557 100 x 80 DuckfootMJ3557 65 x 80 x 2" BSPDuckfootMJ3557 65 x 80 x 2" BSPDuckfootMJ3557 150 x 100DuckfootMJ3557 150 x 100 x 1½" BSPDuckfootMJ3557 150 x 100 x 2" BSPDuckfootMJ3557 125 x 80 x 2" BSPDuckfootMJ3557 50 x 80DuckfootMJ3557 50 x 80 x 2" BSPDuckfootMJ3557 125 x 80 x 2" BSPDuckfootMJ3557 150 x 80 x 2" BSPDuckfootMJ3557 150 x 80 x 2" BSPDuckfootMJ3557 50 x 80 DuckfootMJ3557 50 x 80 x 2" BSPDuckfootMJ3557 100 x 80 x 2" BSPDuckfootMJ3557 100 x 80 DuckfootMJ3557 65 x 80 DuckfootMJ3557 65 x 80 x 2" DuckfootMJ3557 150 x 100 DuckfootMJ3557 150 x 100 x 1½" BSPDuckfootMJ3557 150 x 100 x 2" BSPDuckfootMJ3557 125 x 80 x 2” BSPDuckfootMJ3557 50 x 80 DuckfootMJ3557 50 x 80 x 2" BSPDuckfootMJ3557 125 x 80 x 2" BSPDuckfootMJ3557 150 x 80 x 2" BSPDuckfootMJ3557 150 x 80 x 2" BSPDuckfootMJ3557 100 x 80 x 2" BSPDuckfootMJ3750 100 x 80 DuckfootMJ3750 150 x 80 DuckfootMJ3750 100 x 80 DuckfootMJ3750 150 x 80 DuckfootMJ3757 100 x 80DuckfootMJ3757 150 x 80 DuckfootMJ3757 100 x 80DuckfootMJ3757 150 x 80Duckfoot

Model: MJ3007 50 x 50Straight CouplingMJ3007 65 x 65Straight CouplingMJ3007 80 x 80Straight CouplingMJ3007 100 x 100Straight CouplingMJ3007 125 x 125Straight CouplingMJ3007 150 x 150Straight CouplingMJ3007 200 x 200Straight CouplingMJ3007 225 x 225Straight CouplingMJ3007 250 x 250Straight CouplingMJ3007 300 x 300Straight CouplingMJ300+ 50 x 50Straight CouplingMJ3007 65 x 65Straight CouplingMJ3007 80 x 80 Straight CouplingMJ3007 100 x 100Straight CouplingMJ3007 125 x 125Straight CouplingMJ3007 150 x 150Straight CouplingMJ3007 200 x 200Straight CouplingMJ3007225 x 225Straight CouplingMJ3007 250 x 250Straight CouplingMJ3007 300 x 300Straight CouplingMJ3087 50 x 63 Spigot CouplingMJ3087 100 x 110Spigot CouplingMJ3087 150 x 160Spigot CouplingMJ3087 200 x 200 Spigot CouplingMJ3087 50 x 63Spigot CouplingMJ3087 100 x 110 Spigot CouplingMJ3087 150 x 160 Spigot CouplingMJ3087 200 x 200 Spigot CouplingMJ3180 80 x 110 Spigot CouplingMJ3180 80 x 110 Spigot CouplingMJ3187 80 x 110 Spigot CouplingMJ3187 80 x 110 Spigot CouplingMJ3057 50M x 50Flange AdapterMJ3057 65M x 65Flange AdapterMJ3057 80 x 80Flange AdapterMJ3057 125 x 125 Flange AdapterMJ3057 150 x 150 Flange AdapterMJ3057200x 200 Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 50 x 50Flange AdapterMJ3057 65 x 65Flange AdapterMJ3057 80 x 80Flange AdapterMJ3057 100 x 100Flange AdapterMJ3057 125 x 125Flange AdapterMJ3057 150 x 150Flange AdapterMJ3057 200 x 200Flange AdapterMJ3057 2200 x 200Flange AdapterMJ3057 250 x 250Flange AdapterMJ3057 250 x 250Flange AdapterMJ3057 300 x 300Flange AdapterMJ3057 300 x 300Flange AdapterMJ3057 80M x 80Flange AdapterMJ3057 100 x 100Flange AdapterMJ3057 150 x 150Flange AdapterMJ3057 200 x 200Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300Flange AdapterMJ3057 80 x 80 Flange AdapterMJ3057 100 x 100Flange AdapterMJ3057 150 x 150Flange AdapterMJ3057 200 x 200 Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 200x 200Flange AdapterMJ3057 50 x 50 Flange AdapterMJ3057 65 x 65 Flange AdapterMJ3057 80 x 80 Flange AdapterMJ3057 100 x 100 Flange AdapterMJ3057 125 x 125 Flange AdapterMJ3057 150 x 150 Flange AdapterMJ3057 200 x 200 Flange AdapterMJ3057 200 x 200 Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 80 x 80 Flange AdapterMJ3057 100 x 100Flange AdapterMJ3057 150 x 150 Flange AdapterMJ3057 200 x 200 Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 80 x 80 Flange AdapterMJ3057 100 x 100 Flange AdapterMJ3057 150 x 150 Flange AdapterMJ3057 200 x 200 Flange AdapterNJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 80 x 80 Flange AdapterMJ3057 100 x 100 Flange AdapterMJ3057 150 x 150 Flange AdapterMJ3057 200 x 200 Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3057 50 x 50 Flange AdapterMJ3057 65 x 65 Flange AdapterMJ3057 80 x 80 Flange AdapterMJ3057 x 100 x 100 Flange AdapterMJ3057 125 x 125Flange AdapterMJ3057 150 x 150 Flange AdapterMJ3057 200 x 200 Flange AdapterMJ3057 250 x 250 Flange AdapterMJ3057 300 x 300 Flange AdapterMJ3207 50 x Blind End CapMJ3207 65 x Blind End CapMJ3207 80 x Blind End CapMJ3207 10 x BlindEnd CapMJ3207 125 x Blind End CapMJ3207 150 x Blind End CapMJ3207 200 x Blind End CapMJ3207 225 x Blind End CapMJ3207 250 x Blind End CapMJ3207 300x Blind End CapMJ3207 50 x Blind End CapMJ3207 65 x Blind End CapMJ3207 80 x Blind End CapMJ3207 100 x Blind End CapMJ3207 125 x Blind End CapMJ3207 150 x Blind End CapMJ3207 200 x Blind End CapMJ3207 225 x Blind End CapMJ3207 250 x Blind End CapMJ3207 300 x Blind End CapMJ3207 50 x ¾" BSPEnd CapMJ3207 50 x 1" BSPEnd CapMJ3207 50 x 1¼" BSPEnd CapMJ3207 50 x 1½" BSPEnd CapMJ3207 50 x 2" BSPEnd CapMJ3207 65 x ¾" BSPEnd CapMJ3207 65M x 1" BSPEnd CapMJ3207 65M x 1½" BSPEnd CapMJ3207 65x 1½" BSPEnd CapMJ3207 65 x 2" BSPEnd CapMJ3207 80 x ¾" BSPEnd CapMJ3207 80 x 1" BSPEnd CapMJ3207 80 x 1¼" BSPEnd CapMJ3207 80 x 1½" BSPEnd CapMJ3207 80 x 2" BSPEnd CapMJ3207 100 x ¾" BSPEnd CapMJ3207 100 x 1" BSPEnd CapMJ3207 100 x 1¼" BSPEnd CapMJ3207 100 x 1½" BSPEnd CapMJ3207 100 x 2" BSPEnd CapMJ3207 125 x ¾" BSPEnd CapMJ3207 125 x 1" BSPEnd CapMJ3207 125x 1¼" BSPEnd CapMJ3207 125 x 1½" BSPEnd CapMJ3207 125 x 2" BSPEnd CapMJ3207 150 x ¾" BSPEnd CapMJ3207 150 x 1" BSPEnd CapMJ3207 150 x 1¼" BSPEnd CapMJ3207 150 x 1½" BSPEnd CapMJ3207 150 x 2" BSPEnd CapMJ3207 200 x ¾" BSPEnd CapMJ3207 200 x 1" BSPEnd CapMJ3207 200 x 1¼" BSPEnd CapMJ3207 200 x 1½" BSPEnd CapMJ3207 200 x 2" BSPEnd CapMJ3207 250 x ¾" BSPEnd CapMJ3207 250 x 1" BSPEnd CapMJ3207 250 x 1¼" BSPEnd CapMJ3207 250 x 1½" BSPEnd CapMJ3207 250 x 2" BSPEnd CapMJ3207 300 x ¾" BSPEnd CapMJ3207 300 x 1" BSPEnd CapMJ3207 300 x 1¼" BSPEnd CapMJ3207 300 x 1½" BSPEnd CapMJ3207 300 x 2" BSPEnd CapMJ3207 225 x ¾" BSPEnd CapMJ3207 225 x 1" BSPEnd CapMJ3207 225 x 1¼" BSPEnd CapMJ3207 225 x 1½" BSPEnd CapMJ3207 225 x 2" BSPEnd CapMJ3207 50M x ¾" BSPEnd CapMJ3207 50 x 1" BSPEnd CapMJ3207 50 x 1¼" BSPEnd CapMJ3207 50 x 1½" BSPEnd CapMJ3207 50M x 2" BSPEnd CapMJ3207 65 x ¾" BSPEnd CapMJ3207 65 x 1" BSPEnd CapMJ3207 65 x 1¼" BSPEnd CapMJ3207 65 x 1½" BSPEnd CapMJ3207 65 x 2" BSPEnd CapMJ3207 80 x ¾" BSPEnd CapMJ3207 80 x 1" BSPEnd CapMJ3207 80 x 1¼" BSPEnd CapMJ3207 80 x 1½" BSPEnd CapMJ3207 80 x 2" BSPEnd CapMJ3207 100 x ¾" BSPEnd CapMJ3207 100 x 1" BSPEnd CapMJ3207 100 x 1¼" BSPEnd CapMJ3207 100 x 1½" BSPEnd CapMJ3207 100 x 2" BSPEnd CapMJ3207 125 x ¾" BSPEnd CapMJ3207 125 x 1" BSPEnd CapMJ3207 125 x 1¼" BSPEnd CapMJ3207 125 x 1½" BSPEnd CapMJ3207 125 x 2" BSPEnd CapMJ3207 150M x ¾" BSPEnd CapMJ3207 150M x 1" BSPEnd CapMJ3207 150M x 1¼" BSPEnd CapMJ3207 150M x 1½" BSPEnd CapMJ3207 150M x 2" BSPEnd CapMJ3207 200M x ¾" BSPEnd CapMJ3207 200M x 1" BSPEnd CapMJ3207 200M x 1¼" BSPEnd CapMJ3207 200M x 1½" BSPEnd CapMJ3207 200M x 2" BSPEnd CapMJ3207 250M x ¾" BSPEnd CapMJ3207 250M x 1" BSPEnd CapMJ3207 250M x 1¼" BSPEnd CapMJ3207 250M x 1½" BSPEnd CapMJ3207 250M x 2" BSPEnd CapMJ3207 300M x ¾" BSPEnd CapMJ3207 300M x 1" BSPEnd CapMJ3207 300M x 1¼ BSPEnd CapMJ3207 300M x 1½" BSPEnd CapMJ3207 300M x 2" BSPEnd CapMJ3207 225M x ¾" BSPEnd CapMJ3207 225M x 1" BSPEnd CapMJ3207 225M x 1¼" BSPEnd CapMJ3207 225M x 1½" BSPEnd CapMJ3207 225M x 2" BSPEnd CapMJ3107 65 x 50 Reduction CouplingMJ3107 80x 65Reduction CouplingMJ3107 100 x 80Reduction CouplingMJ3107 125Mx 100Reduction CouplingMJ3107 150 x 100Reduction CouplingMJ3107 150 x 125Reduction CouplingMJ3107 200 x 150Reduction CouplingMJ3107 225 x 200Reduction CouplingMJ3107 250 x 225Reduction CouplingMJ3107 300 x 250Reduction CouplingMJ3107 65 x 50Reduction CouplingMJ3107 80 x 65Reduction CouplingMJ3107 100 x 80Reduction CouplingMJ3107 125 x 100Reduction CouplingMJ3107 150 x 100Reduction CouplingMJ3107 150 x 125Reduction CouplingMJ3107 200 x 150Reduction CouplingMJ3107 225 x 200Reduction CouplingMJ3107 250 x 225Reduction CouplingMJ3107 300 x 250Reduction CouplingMJ3150 50 x 40Reduced Flange AdapterMJ3150 65 x 80Reduced Flange AdapterMJ3150 100 x 80Reduced Flange AdapterMJ3150 125 x 100 Reduced Flange AdapterMJ3150 125 x 150Reduced Flange AdapterMJ3150 225 x 200 Reduced Flange AdapterMJ3150 225 x 200Reduced Flange AdapterMJ3150 225 x 250Reduced Flange AdapterMJ3150 225 x 250 Reduced Flange AdapterMJ3150 50 x 40Reduced Flange AdapterMJ3150 65 x 80 Reduced Flange AdapterMJ3150 100 x 80 Reduced Flange AdapterMJ3150 125 x 100 Reduced Flange AdapterMJ3150 125 x 150 Reduced Flange AdapterMJ3150 225 x 200 Reduced Flange AdapterMJ3150 225 x 200 Reduced Flange AdapterMJ3150 225 x 250 Reduced Flange AdapterMJ3150 225 x 250 Reduced Flange AdapterMJ3157 225 x 200Reduced Flange AdapterMJ3157 225 x 250 A2 Reduced Flange AdapterMJ3157 50 x 40 Reduced Flange AdapterMJ3157 65 x 80 Reduced Flange AdapterMJ3157 100 x 80 Reduced Flange AdapterMJ3157 125 x 100Reduced Flange AdapterMJ3157 125 x 150Reduced Flange AdapterMJ3157 225 x 200 Reduced Flange AdapterMJ3157 225 x 200Reduced Flange AdapterMJ3157 225 x 250Reduced Flange AdapterMJ3157 225 x 250Reduced Flange AdapterMJ3157 50 x 40Reduced Flange AdapterMJ3157 65 x 80Reduced Flange AdapterMJ3157 100 x 80Reduced Flange AdapterMJ3157 125 x 100Reduced Flange AdapterMJ3157 125 x 150Reduced Flange AdapterMJ3157 225 x 200Reduced Flange AdapterMJ3157 225 x 200 A2 EReduced Flange AdapterMJ3157 225 x 250 Reduced Flange AdapterMJ3157 225 x 250 Reduced Flange AdapterMJ3157 65 x 80 Reduced Flange AdapterMJ3157 100 x 80 Reduced Flange AdapterMJ3157 125 x 100 Reduced Flange AdapterMJ3157 125 x 150 Reduced Flange AdapterMJ3157 225 x 200 Reduced Flange AdapterMJ3157 225 x 250 Reduced Flange AdapterMJ3400 80 x 80BendMJ3400 100 x 100BendMJ3400 150 x 150 BendMJ3400 80 x 80 BendMJ3400 100 x 100 BendMJ3400 150 x 150 BendMJ3407 80 x 80 BendMJ3407 100 x 100 BendMJ3407 150 x 150BendMJ3407 80 x 80 BendMJ3407 100 x 100BendMJ3407 150 x 150BendMJ3450 80Fx 80 x 2" BSPDuckfootMJ3450 80F x 80 DuckfootMJ3450 100F x 100DuckfootMJ3450 100F x 100 x 2" BSPDuckfootMJ3450 80 x 80FL x 2" BSPDuckfootMJ3450 80 x 80 DuckfootMJ3450 100 x 100 DuckfootMJ3450 100 x 100 x 2" BSPDuckfootMJ3457 80 x 80 x 2" BSPDuckfootMJ3457 80 x 80 DuckfootMJ3457 100 x 100DuckfootMJ3457 100 x 100 x 2" BSPDuckfootMJ3457 80 x 80 x 2" BSPDuckfootMJ3457 80 x 80 DuckfootMJ3457 100 x 100 DuckfootMJ3457 100 x 100 x 2" BSPDuckfootMJ3550 100 x 80 x 2" BSPDuckfootMJ3550 100 x 80 DuckfootMJ3550 150 x 100 DuckfootMJ3550 150 x 100 x 2" BSPDuckfootMJ3550 100 x 80 x 2" BSPDuckfootMJ3550 100 x 80 DuckfootMJ3550 150 x 100 DuckfootMJ3550 150 x 100 x 2" BSPDuckfootMJ3557 50 x 80 DuckfootMJ3557 50 x 80 x 2" BSPDuckfootMJ3557 100 x 80 x 2" BSPDuckfootMJ3557 100 x 80 DuckfootMJ3557 65 x 80 x 2" BSPDuckfootMJ3557 65 x 80 x 2" BSPDuckfootMJ3557 150 x 100DuckfootMJ3557 150 x 100 x 1½" BSPDuckfootMJ3557 150 x 100 x 2" BSPDuckfootMJ3557 125 x 80 x 2" BSPDuckfootMJ3557 50 x 80DuckfootMJ3557 50 x 80 x 2" BSPDuckfootMJ3557 125 x 80 x 2" BSPDuckfootMJ3557 150 x 80 x 2" BSPDuckfootMJ3557 150 x 80 x 2" BSPDuckfootMJ3557 50 x 80 DuckfootMJ3557 50 x 80 x 2" BSPDuckfootMJ3557 100 x 80 x 2" BSPDuckfootMJ3557 100 x 80 DuckfootMJ3557 65 x 80 DuckfootMJ3557 65 x 80 x 2" DuckfootMJ3557 150 x 100 DuckfootMJ3557 150 x 100 x 1½" BSPDuckfootMJ3557 150 x 100 x 2" BSPDuckfootMJ3557 125 x 80 x 2” BSPDuckfootMJ3557 50 x 80 DuckfootMJ3557 50 x 80 x 2" BSPDuckfootMJ3557 125 x 80 x 2" BSPDuckfootMJ3557 150 x 80 x 2" BSPDuckfootMJ3557 150 x 80 x 2" BSPDuckfootMJ3557 100 x 80 x 2" BSPDuckfootMJ3750 100 x 80 DuckfootMJ3750 150 x 80 DuckfootMJ3750 100 x 80 DuckfootMJ3750 150 x 80 DuckfootMJ3757 100 x 80DuckfootMJ3757 150 x 80 DuckfootMJ3757 100 x 80DuckfootMJ3757 150 x 80Duckfoot

Marking: Size and Georg fischer logo body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: George Fischer WAGA

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1405350

            

Print this entry

`N.U Duopress` range of stainless steel (304) press fittings for use with stainless steel (304) pipe. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Size: DN15 to DN108

Model: N.U Duopress

Marking: Size & N.U on body of fitting.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: Shenzhen Artway Piping Co. Ltd.

List all fittings by this factor

WRAS Approval Number  1406060

            

Print this entry

ELGEF+ range of PE100 spigot fittings, using black coloured, injection moulded polyethylene electrofusion fittings for use with PE 100 pipe. For above and below ground use and for cold water use only Maximum working pressures: when used with SDR 11 pipe = 16.0bar & when used with SDR17 = 10.0bar.

Size:  

Model: ELGEF+ LONG SPIGOT ELBOW 90 PE100 SDR11 25mm-315 mm. ELGEF+ LONG SPIGOT ELBOW 90 PE100 SDR17 90mm -315 mm. ELGEF+ LONG SPIGOT ELBOW 45 PE100 SDR11 25-315. ELGEF+ LONG SPIGOT ELBOW 45 PE 100 SDR17 90-315. ELGEF+ LONG SPIGOT BEND 90 PE100 SDR11 25-315. ELGEF+ LONG SPIGOT BEND 90 PE100 SDR17 90-315. ELGEF+ LONG SPIGOT BEND 45 PE100 SDR11 32-315. ELGEF+ LONG SPIGOT BEND 45 PE100 SDR17 90-315. ELGEF+LONG SPIGOT TEE PE100 SDR11 25-315. ELGEF+LONG SPIGOT TEE PE100 SDR17 90-315. ELGEF+LONG SPIGOT TEE PE100 SDR11 25-20-315-280. ELGEF+LONG SPIGOT REDUCER PE100 SDR11 25-20-315-280. ELGEF+LONG SPIGOT REDUCER PE100 SDR17 90-63-315-280. ELGEF+LONG SPIGOT CAP PE100 SDR11 25-315. ELGEF+LONG SPIGOT CAP PE100 SDR17 50-315. ELGEF+LONG SPIGOT FLANGE ADAPTOR PE100 SDR11 25DN20-315DN300. ELGEF+LONG SPIGOT FLANGE ADAPTOR PE100 SDR17 50DN40-315DN300. ELGEF+SPIGOT ADAPTOR PE-RP BRASS SDR11 32-1-63-2. ELGEF+SPIGOT ADAPTOR PE-R BRASS SDR11 25-3/4 63-2. ELGEF+SPIGOT ADAPTOR PE-RP BRASS SDR11 L/NUT 25-34-63-2. ELGEF+SPIGOT ADAPTOR PE-R SSTL 25-3/4-63-2. ELGEF+SHORT SPIGOT BEND 90 PE100 SDR11 25-315. ELGEF+SHORT SPIGOT BEND 90 PE100 SDR17 50-280. ELGEF+SHORT SPIGOT ELBOW 90 PE100 SDR11 25-63. ELGEF+SHORT SPIGOT ELBOW 45 PE100 SDR11 25-225. ELGEF+SHORT SPIGOT ELBOW 45 PE100 SDR17 50-225. ELGEF+SHORT SPIGOT TEE PE100 SDR11 25-315. ELGEF+SHORT SPIGOT TEE PE100 SDR17 50-315. ELGEF+SHORT SPIGOT TEE PE100 SDR11 63x32-250x160. ELGEF+SHORT SPIGOT TEE PE100 SDR17 63x32-225x160. ELGEF+SHORT SPIGOT REDUCER PE100 SDR11 25-20-315-280. ELGEF+SHORT SPIGOT REDUCER PE100 SDR17 50-40-315- 280. ELGEF+SHORT SPIGOT FLANGE ADAPTOR PE100 SDR11 250DN250-315DN300. ELGEF+SHORT SPIGOT FLANGE ADAPTOR PE100 SDR17 250DN220-300-315.

Marking: Size, PE100, SDR Rating, GF, date of manufacture in clock face style moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: George Fischer Sales Ltd

List all fittings by this factor

WRAS Approval Number  1403049

            

Print this entry

Range of compression fittings with polypropylene bodies, nitrile `O` rings and plastic pipe liners. Fittings are for use with barrier pipe (WIS 4-32-19 Type B). For above and below ground use. Maximum operating pressure 16.0 bar. Cold water only.

Size: 20mm & 32mm

Model: Straight coupler (1001): XRO244 (25mm) & XRO245 (32mm). Reducing coupler (1002): XRO246 (32mm x 25mm). Male adaptor (1003): XR0235 (25mm x ¾” BSP), XR0238 (25mm x 1” BSP), XR0236 (32mm x ¾” BSP) & XR0237 (32mm x 1” BSP). Female adaptor (1004): XR0240 (25mm x ¾” BSP), XR0243 (25mm x 1” BSP), XR0241 (32mm x 1” BSP), XR0242 (32mm x 1” BSP) & XR0239 (32mm x 1¼” BSP). Equal Tee 90°C (1005): XR0247 (25mm) & XR0248 (32mm). Elbow 90°C (1006): XR0249 (25mm) & XR0250 (32mm).

Marking: Unidelta, made in Italy, KIWA and PN rating on fitting bodies.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Unidelta SpA

List all fittings by this manufacturer

Factor: Radius Systems Limited

List all fittings by this factor

WRAS Approval Number  1210093

            

Print this entry

`Flofit` range of pushfit fittings manufactured from polyacetal copolymer. For use with PE-x (Kitemarked to BS 7291-3:201), PB (Kitemarked to BS 7291-2:2010) and copper pipe. For above ground use only. Maximum working pressure & operating temperature: 12.0 bar @ 20°C & 6.0 bar @ 83°C.

Size: 10mm, 12mm, 15mm, 18mm, 22mm.

Model: Straight connectors: FC10 (10mm), FC15 (15mm) & FC22 (22mm). Reducers: FRC15 (15mmx10mm) & FRC22 (22mmx15mm). Equal elbows: FB10 (10mm), FB15 (15mm) & FB22 (22mm). Equal tees: FT10 (10mm), FT15 (15mm) & FT22 (22mm). Reducing tees: FRT151010 (15mmx10mmx10mm), FRT151510 (15mmx15mmx10mm), FRT151522 (15mmx15mmx22mm), FRT221515 (22mmx15mmx15mm), FRT222210 (22mmx22mmx10mm) & FRT222215 (22mmx22mmx15mm). Stem elbows: FS10 (10mm) & FS15 (15mm). Stop ends: FE10 (10mm), FE15 (15mm) & FE22 (22mm). Straight tap connectors: FTC1512 (15mm x ½”), FTC1534 (15mm x ¾”), & FTC2234 (22mm x ¾”). Bent tap connectors: FBC1512 (15mm x ½”).

Marking: `FP` and size moulded into collet. Wras Approved Product logo moulded into body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: FloPlast Ltd

List all fittings by this factor

WRAS Approval Number  1207344

            

Print this entry

IRN R001, R120 Range of push-fit fittings with plastic bodies for below ground use with MDPE pipe to BS EN12201 and BS6572. Maximum working pressure 10.0 bar. Cold water use only.

Size: 20, 25mm push fit

Model: JG222025B, JG222525B, UTS147-DB and UTS197-DB

Marking: JG on body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: John Guest Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1404324

            

Print this entry

Range of pushfit fittings with plastic bodies and NBR `O`-rings to be used with metric PE and imperial PE (manufactured to BS1972 & BS3284), Copper (manufactured to BSEN 1057), PB (manufactured to BSEN 7291 part 2) and PEX (manufactured to BSEN 7291 part 3) pipe. Fittings for use with metric and imperial PE pipe are for below ground use. Fittings for use with copper, PB or PEX pipe are for above ground use only. Maximum working pressure 16.0 bar. Cold water use only.

Size:  

Model: 1001CU - Copper coupler: 20mm x 15mm - 32mm x 28mm. 1001M - Metric/imperial coupler: 20mm x ½” - 32mm x 1”. 1001U - Coupling: 20mm x 20mm - 63mm x 63mm. 1002C - Copper pipe male adaptor: - 15mm x ¾” - 28mm x 1”. 1002G - Male meter adaptor: 15mm - ¾”. 1002U - Male adaptor: 20mm x ½” - 63mm x 2”. 1003C - Female copper adaptor: 15mm x ¾” - 22mm x ¾”. 1003U - Male adaptor: 20mm x ½” - 63mm x 2”. 1004U - Tee: 20mm x 20mm x 20mm - 63mm x 63mm x 63mm. 1005M - Metric/Imperial elbow: 25mm x ½” - 25mm x ¾”. 1005U - Elbow: 20mm x 20mm - 63mm x 63mm. 1011U - Reducing coupler: 25mm x 20mm - 63mm x 50mm. 1012 - End plug: 20mm - 32mm. 1012U - End plug: 40mm - 63mm. 1014U - Female tee: 25mm x ¾” x 25mm - 32mm x 1” x 32mm. 1015U - Female elbow: 20mm x ½” - 32mm x 1”. 1034U - Reducing tee: 25mm x 20mm x 25mm - 32mm x 25mm x 32mm. 1051U - Reducing elbow 25mm x 20mm. 1075U - Wall plate elbow: 20mm x ½” - 25mm x ¾”. 1085U - Male elbow: 20mm x ½” - 63mm x 2”.

Marking: Plasson, size & PPB on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: Plasson UK Ltd

List all fittings by this factor

WRAS Approval Number  1203363

            

Print this entry

Range of pre-stressed concrete multi-layer pipes with a GRP inner and outer layer and spigot fittings for use above and below ground. Maximum working pressure 30 bar. Maximum operating temperature 60°C

Size: DN100, DN200, DN300, DN400, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200, DN1400, DN1500, DN1600, DN1800, DN2000, DN2200, DN2400, DN2600, DN2800, DN3000 & DN3200.

Model: Pre-stressed Concrete Multi-types Cylinder Pipe

Marking: Hengrun Group Co Ltd., DN, maximum working pressure and WRAS logo on label.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Hengrun Group Co Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1405058

            

Print this entry

Conex range of push-fit fittings with DZR brass bodies incorporating an EPDM `O`-ring and stainless steel grab ring for use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 Bar. Maximum operating temperature 95°C.

Size: 10mm - 28mm, ½” - 1” male BSP, ½” - 1” female BSP

Model: ZN8001 0120000 CXP-F 001 STREET ELBOW 12mm ZN8001 0150000 CXP-F 001 STREET ELBOW 15mm ZN8001 0180000 CXP-F 001 STREET ELBOW 18mm ZN8001 0220000 CXP-F 001 STREET ELBOW 22mm ZN8001 0280000 CXP-F 001 STREET ELBOW 28mm ZN8002G0150400 CXP-F 002G BENT TAP CON 15mmx1/2” ZN8090 0100000 CXP-F 090 FxF 90" ELBOW 10mm ZN8090 0120000 CXP-F 090 FxF 90" ELBOW 12mm ZN8090 0150000 CXP-F 090 FxF 90" ELBOW 15mm ZN8090 0180000 CXP-F 090 FxF 90" ELBOW 18mm ZN8090 0220000 CXP-F 090 FxF 90" ELBOW 22mm ZN8090 0280000 CXP-F 090 FxF 90" ELBOW 28mm ZN8090G0150400 CXP-F 090G FM ELB CON 15mmx1/2" ZN8090G0220600 CXP-F 090G FM ELB CON 22mmx3/4" ZN8090G0280800 CXP-F 090G FM ELB CON 28mmx1" ZN8130 0101010 CXP-F 130 FxFxF EQUAL TEE 10mm ZN8130 0121212 CXP-F 130 FxFxF EQUAL TEE 12mm ZN8130 0151010 CXP-F 130 RED E&B TEE 15x10x10mm ZN8130 0151015 CXP-F 130 RED BR TEE 15x15x10mm ZN8130 0151215 CXP-F 130 RED BR TEE 15x15x12mm ZN8130 0151512 CXP-F 130 RED END TEE 15x12x15mm ZN8130 0151515 CXP-F 130 FxFxF EQUAL TEE 15mm ZN8130 0181518 CXP-F 130 RED BR TEE 18x18x15mm ZN8130 0181815 CXP-F 130 RED END TEE 18x15x18mm ZN8130 0181818 CXP-F 130 FxFxF EQUAL TEE 18mm ZN8130 0221022 CXP-F 130 RED BR TEE 22x22x10mm ZN8130 0221515 CXP-F 130 RED E&B TEE 22x15x15mm ZN8130 0221522 CXP-F 130 RED BR TEE 22x22x15mm ZN8130 0221822 CXP-F 130 RED BR TEE 22x22x18mm ZN8130 0222215 CXP-F 130 RED END TEE 22x15x22mm ZN8130 0222218 CXP-F 130 RED END TEE 22x18x22mm ZN8130 0222222 CXP-F 130 FxFxF EQUAL TEE 22mm ZN8130 0281528 CXP-F 130 RED BR TEE 28x28x15mm ZN8130 0282222 CXP-F 130 RED E&B TEE 28x22x22mm ZN8130 0282228 CXP-F 130 RED BR TEE 28x28x22mm ZN8130 0282815 CXP-F 130 RED END TEE 28x15x28mm ZN8130 0282822 CXP-F 130 RED END TEE 28x22x28mm ZN8130 0282828 CXP-F 130 FxFxF EQUAL TEE 28mm ZN8130G0120412 CXP-F 130G FM BR TEE 12mmx12mmx1/2” ZN8130G0150415 CXP-F 130G FM BR TEE 15mmx15mmx1/2” ZN8130G0180418 CXP-F 130G FM BR TEE 18mmx18mmx1/2” ZN8130G0220422 CXP-F 130G FM BR TEE 22mmx22mmx1/2” ZN8130G0280428 CXP-F 130G FM BR TEE 28mmx28mmx1/2” ZN8240 0121000 CXP-F 240 RED COUPLER 12x10mm ZN8240 0151000 CXP-F 240 RED COUPLER 15x10mm ZN8240 0151200 CXP-F 240 RED COUPLER 15x12mm ZN8240 0181500 CXP-F 240 RED COUPLER 18x15mm ZN8240 0221500 CXP-F 240 RED COUPLER 22x15mm ZN8240 0221800 CXP-F 240 RED COUPLER 22x18mm ZN8240 0282200 CXP-F 240 RED COUPLER 28x22mm ZN8240G0150400 CXP-F 240G STR TAP CON 15mmx1/2" ZN8240G0150600 CXP-F 240G STR TAP CON 15mmx3/4" ZN8240G0220600 CXP-F 240G STR TAP CON 22mmx3/4" ZN8243 0151000 CXP-F 243 REDUCER 15x10mm ZN8243 0151200 CXP-F 243 REDUCER 15x12mm ZN8243 0181500 CXP-F 243 REDUCER 18x15mm ZN8243 0221500 CXP-F 243 REDUCER 22x15mm ZN8243 0221800 CXP-F 243 REDUCER 22x18mm ZN8243 0282200 CXP-F 243 REDUCER 28x22mm ZN8243G0120300 CXP-F 243G STR ML CON 12mmx3/8" ZN8243G0120400 CXP-F 243G STR ML CON 12mmx1/2" ZN8243G0150400 CXP-F 243G STR ML CON 15mmx1/2" ZN8243G0180600 CXP-F 243G STR ML CON 18mmx3/4" ZN8243G0220600 CXP-F 243G STR ML CON 22mmx3/4" ZN8243G0280800 CXP-F 243G STR ML CON 28mmx1" ZN8270 0100000 CXP-F 270 STR COUPLER 10mm ZN8270 0120000 CXP-F 270 STR COUPLER 12mm ZN8270 0150000 CXP-F 270 STR COUPLER 15mm ZN8270 0180000 CXP-F 270 STR COUPLER 18mm ZN8270 0220000 CXP-F 270 STR COUPLER 22mm ZN8270 0280000 CXP-F 270 STR COUPLER 28mm ZN8270G0120300 CXP-F 270G STR FM CON 12mmx3/8" ZN8270G0120400 CXP-F 270G STR FM CON 12mmx1/2" ZN8270G0150400 CXP-F 270G STR FM CON 15mmx1/2" ZN8270G0180600 CXP-F 270G STR FM CON 18mmx3/4" ZN8270G0220600 CXP-F 270G STR FM CON 22mmx3/4" ZN8270G0220800 CXP-F 270G STR FM CON 22mmx1" ZN8270G0280600 CXP-F 270G STR FM CON 28mmx3/4" ZN8270G0280800 CXP-F 270G STR FM CON 28mmx1" ZN8301 0100000 CXP-F 301 STOP END CAP 10mm ZN8301 0120000 CXP-F 301 STOP END CAP 12mm ZN8301 0150000 CXP-F 301 STOP END CAP 15mm ZN8301 0180000 CXP-F 301 STOP END CAP 18mm ZN8301 0220000 CXP-F 301 STOP END CAP 22mm ZN8301 0280000 CXP-F 301 STOP END CAP 28mm ZN8350 0150400 CXP-F 350 TANK CONNECTOR 15mm ZN8350 0220600 CXP-F 350 TANK CONNECTOR 22mm ZN8350 0280800 CXP-F 350 TANK CONNECTOR 28mm ZN8472G0150400 CXP-F 472G W/PLATE ELB 15mmx1/2"

Marking: Conex, size, B, CR on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Taizhou IDC Wanda Valve Company Limited

List all fittings by this manufacturer

Factor: Conex Universal Ltd

List all fittings by this factor

WRAS Approval Number  1403071

            

Print this entry

“B push” range of push fit fittings (brass bodies) incorporating stainless steel grip rings and EPDM O rings. The fittings are suitable for use with: PE-X pipe (to BS7291-2) in size 15mm only: Maximum working pressure 6.0 bar @ 95°C; PB pipe to (to BS7291 ) in sizes 15mm, 22mm and 28mm: Maximum working pressure 6.0 bar @ 95°C; Copper pipe (to BS EN 1057) in sizes 15mm, 22mm and 28mm: Maximum working pressure 16.0 bar @ 95°C. Fittings intended for use with plastic pipe are supplied with copper inserts. For above ground use only.

Size:  

Model: Equal coupler BM8270 15mm - 28mm Fitting reducer BM8243 22mm x 15mm Tap connector BM8240G 15mm x ½” female BSP & 22mm x ¾” female BSP Stop end BM8301 15mm - 28mm Reduced coupler BM8240 22mm x 15mm & 28mm x 22mm Straight female connector 15mm x ¾” BSP female 22mm x ½” - 1” BSP female 28mm x 1” BSP female Straight male connector 15mm x ½” - 1” BSP male 22mm x ¾” - 1” BSP male Tank connector BM8350 15mm x ½” BSP male, 22mm x ½” BSP male & 28mm x 1” BSP male Equal elbow BM8090 15mm - 28mm Male elbow BM8092G 15mm x ½” BSP male & 22mm x ¾” BSP male Female elbow BM8090G 15mm x ½ BSP female & 22mm x ½” BSP female Wallplate elbow 15mm x ½” BSP female & 22mm x ¾” BSP female Equal tee BM8130 15mm - 28mm Tee reduced end BM8130 22mm x 15mm x 15mm, 28mm x 15mm x 28mm & 28mm x 22mm x 28mm Tee reduced branch BM8130 22mm x 22mm x 15mm, 28mm x 28mm x 15mm & 28mm x 28mm x 22mm Female branch tee BM8130 15mm x 15mm x ½” BSP female, 22mm x 22mm x ½” BSP female & 28mm x 28mm x 1” BSP female Bent tap connector BM8002G 15mm x ½” - ¾” BSP captive nut & 22mm x ¾” BSP captive nut Internal liners (inserts) 15mm - 28mm

Marking: >B< logo , size DVGW and CR mark on fitting bodies

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: IDC Mfg. Group (Beijing Office)

List all fittings by this manufacturer

Factor: Conex Universal Ltd

List all fittings by this factor

WRAS Approval Number  1309117

            

Print this entry

`PRESS-INOX 12000` range of stainless steel crimp fittings for use with stainless steel pipe (complying with EN10204), fittings incorporate EPDM `O`-rings. For above or below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Size: 12000 straight coupling - 15mm to 108mm. 12010 straight male adapter - 15mm x ½”male BSP to 88.9mm X 3” male BSP. 12020 straight female adaptor - 15mm x ½” to 54mm x 2” female BSP. 12040 sleeve coupling - 15mm to 108mm. 12070 flat coupling - 15mm x ¾” BSP captive nut to 35mm x 1 ½” BSP captive nut. 12410 end cap - 15mm to 108mm. 12200 90° bend - 15mm x 15mm to 108mm x 108mm. 12210 90° male bend - 15mm x 15mm to 108mm x 108mm. 12230 45° bend - 15mm x 15mm to 108mm x 108mm. 12240 45° male bend - 15mm x 15mm to 108mm to 108mm. 12310 male elbow - 15mm x ½” BSP male to 54mm x 2” male BSP. 12320 female elbow - 15mm x ½” female BSP to 35mm x 1 ¼” female BSP. 12080 male joint connector - 15mm x ½” male BSP to 54mm x 2” male BSP. 12430 straight coupling reducer - 18mm x 15mm to 108mm x 88.9mm. 12340 90° female wall plate - 15mm x ½” female BSP to 22mm x ¾” female BSP. 12120 female T coupling - 15mm x ½” female BSP x 15mm to 108mm x ¾”female BSP x 108mm. 12100 equal tee - 15mm x15mm x 15mm to 108mm x108mm x 108mm. 12110 reduced tee - 18mm x 15mm x 18mm to 108mm x 88.9mm x 108mm. 12400 PN16 flange /press joint - 15mm to 108mm. 12360 By-pass bend - 15mm x15mm to 28mm x 28mm. 12350 male bend - 15mm x 15mm to 54mm x 54mm.

Model: 12000 straight coupling - 15mm to 108mm. 12010 straight male adapter - 15mm x ½”male BSP to 88.9mm X 3” male BSP. 12020 straight female adaptor - 15mm x ½” to 54mm x 2” female BSP. 12040 sleeve coupling - 15mm to 108mm. 12070 flat coupling - 15mm x ¾” BSP captive nut to 35mm x 1 ½” BSP captive nut. 12410 end cap - 15mm to 108mm. 12200 90° bend - 15mm x 15mm to 108mm x 108mm. 12210 90° male bend - 15mm x 15mm to 108mm x 108mm. 12230 45° bend - 15mm x 15mm to 108mm x 108mm. 12240 45° male bend - 15mm x 15mm to 108mm to 108mm. 12310 male elbow - 15mm x ½” BSP male to 54mm x 2” male BSP. 12320 female elbow - 15mm x ½” female BSP to 35mm x 1 ¼” female BSP. 12080 male joint connector - 15mm x ½” male BSP to 54mm x 2” male BSP. 12430 straight coupling reducer - 18mm x 15mm to 108mm x 88.9mm. 12340 90° female wall plate - 15mm x ½” female BSP to 22mm x ¾” female BSP. 12120 female T coupling - 15mm x ½” female BSP x 15mm to 108mm x ¾”female BSP x 108mm. 12100 equal tee - 15mm x15mm x 15mm to 108mm x108mm x 108mm. 12110 reduced tee - 18mm x 15mm x 18mm to 108mm x 88.9mm x 108mm. 12400 PN16 flange /press joint - 15mm to 108mm. 12360 By-pass bend - 15mm x15mm to 28mm x 28mm. 12350 male bend - 15mm x 15mm to 54mm x 54mm.

Marking: PI, press inox logo, 316L, DVGW and size on fitting body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: PCC GmbH

List all fittings by this factor

WRAS Approval Number  1209072

            

Print this entry

Range of type A non-manipulative brass compression fittings (DZR brass) for use with copper pipe. Maximum working pressure 16 bar. Maximum operating temperature 95°C. For above ground use only.

Size: 6mm, 8mm, 10mm, 12mm, 15mm, 18mm, 28mm, 35mm, 42mm & 54mm.

Model: Conex

Marking: Conex, SANBRA, size, EN1254 & CR on compression nut. CR on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Taizhou Devoda Valve Co. Ltd.

List all fittings by this manufacturer

Factor: Conex Universal Ltd

List all fittings by this factor

WRAS Approval Number  1311328

            

Print this entry

Range of brass pushfit fittings with EPDM seals for use with either copper pipe, PEX pipe manufactured to BS7291 class S or PB pipe manufactured to BS7291/2 class S. Above ground use only. Maximum working pressure PEX & PB 12.0 bar and copper 20.0 bar. Maximum operating temperature 99°C.

Size: 10mm, 15mm, 22mm & 28mm pushfit

Model: Sharkbite range.

Marking: Sharkbite, CF, LF and size on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Reliance Water Controls Ltd

List all fittings by this manufacturer

Factor: GSA Industries (Aust.) Pty Ltd

List all fittings by this factor

WRAS Approval Number  1404091

            

Print this entry

`CAN` range of stainless steel push-fit fittings with EPDM `O` rings incorporating stainless steel grab ring for use with `CAN` stainless steel tube (manufactured to BS EN 10312 & BS EN 10217) for above ground use only. Maximum working pressure: 20.0 bar. Maximum operating temperature: 85°C.

Size: 15, 22, 28, 35, 42, 54, 66.7, 76.1, 108, 159 mm.

Model: Straight coupling: EN.S.01, 15 - 159 mm Reducing coupling: EN.S.01-1, 15 - 159 mm Male coupling: EN.S.02, 15 - 159 mm Female coupling: EN.S.03, 15 - 159 mm 90° Elbow: EN.S.04, 15 - 159 mm 90° Reducing elbow: EN.S.04-1, 15 - 159 mm 90° Street elbow: EN.S.05, 15 - 159 mm 90° Male elbow: EN.S.06, 15 - 108 mm 90° Female elbow: EN.S.07,15 - 108mm Wall plate elbow: EN.S.08, 15 - 22 mm Equal Tee: EN.S.09, 15 - 159 mm Range of reducing Tee's: EN.S.09-1, 15 - 159 mm Male branch Tee: EN.S.10, 15 - 42 mm Female ends Tee: EN.S.11, 22 - 42 mm Female branch Tee: EN.S.12, 15 - 66.7 mm Male end Tee: EN.S.13, 15 - 28 mm Female end Tee: EN.S.14, 15 - 28 mm Cross: EN.S.15, 22 - 66.7 mm Female end Cross: EN.S.16, 28 - 76.1 mm 45° Obtuse elbow: EN.S.17, 15 - 159 mm 45° street Elbow: EN.S.18, 15 - 159 mm End plug: EN.S.19, 15 - 159 mm Cross over:EN.S.23, 15 - 159 mm Flange: EN.S.24, 54 - 159 mm Flange bench tee: EN.S.25, 54 - 159 mm Flange elbow: EN.S.26, 54 - 159 mm Flange end tee: EN.S.27, 54 - 159 mm Slip coupling:EN.S.28, 15 - 159 mm

Marking: 'CAN' and size on fitting body. 'CAN', BS EN standard & size on pipe.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Guangdong Jetwin Pipeline Technology Development Co. Ltd.

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1405059

            

Print this entry

`Profipress and Sanpress` ranges of copper or bronze (press-fit) fittings, with EPDM `O` rings incorporating stainless steel grab ring on the larger sizes. For use with copper tube (manufactured to BS EN 1057) for above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Size: 12,15,18, 22, 28, 35, 42, 54, 64, 66.7, 76.1, 88.9, 108 mm.

Model: `Profipress and Sanpress` fittings consisting of models: 2412XL, 2415.1XL, 2415.5XL, 2415XL, 2417.2XL, 2418XL, 2456XL, 2459.5XL, 2411XL, 2419.1XL, 2416XL, 2426.1XL, 2426XL, 2416, 2415, 2415.1, 2415.2, 2415.3, 2418, 2418.1, 2456, 2457, 2416.1, 2416.2, 2426, 2426.1, 2426.2, 2427, 2428, 2255, 2215.1, 2215.4, 2215.5, 2218, 2244, 2247, 2248, 2259.5, 2260, 2262, 2264, 2265, 2267, 2211, 2211.1, 2212, 2212.1, 2212.3, 2213, 2215.6, 2217.1, 2217.2, 2217.4, 2217.3, 2225, 2225.5, 2225.6, 225.7, 2232.1, 2232.3, 2255, 2228.7, 2214, 2214.1, 2214.2, 2214.3, 2217.2XL, 2218XL, 2256XL, 2259.5XL, 2215.1XL, 2215.5XL, 97779, 97780, 97781, 944770-713.

Marking: Viega, size, DVGW, Kiwa, model code on fitting.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Viega GmbH & Co KG

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1405061

            

Print this entry

Tectite Classic and Tectite Pro ranges of DZR brass push-fit fittings (gunmetal elbows on Pro range) with EPDM `O`-rings and stainless steel grab rings. Tectite Classic for use with copper tube (manufactured to BS 2871), PEX and polybutylene tube (manufactured to BS7291). Tectite Pro for use with copper tube (manufactured to BS 2871). Maximum working pressures & operating temperatures: Classic fittings with copper - 16bar @ 24°C, 12bar @ 65°C & 6.0bar @ 95°C. Classic fittings with PEX & polybutylene - 12.0bar @ 20°C & 6.0 bar @ 65°C & 3.0bar @ 92°C Pro fittings (15mm - 28mm ) - 20.0 bar @ 24°C, 16.0 bar @ 65°C & 10.0bar @ 99°C. Pro fittings (32mm - 54mm) 16.0 bar @ 24°C, 10.0bar @ 65°C & 6.0bar @ 6.0bar.

Size: Tectite Classic: 10mm - 28mm Tectite Pro: 15mm - 54mm

Model: Tectite Pro TX270: straight coupling 15mm - 54mm. Tx270S: straight coupling slip pattern 15mm - 54mm. Tx270G: straight female connector 15mm x ½” BSP - 54mm x 2”. Tx243G: straight male connector taper 15mm x ½” - 54mm x 2”. TX243G: straight male connector parallel 15mm x ½” - 54mm x 2”. TC243: reducer 22mm x 15mm - 54mm x 42mm. TX090: elbow 15mm - 54mm. TX092: street elbow 15mm - 28mm. TX092G: male elbow BSP 15mm x ½” - 22mm x 1”. TX090G: female elbow BSP 15mm x ½” - 22mm x 1”. TX471G: backplate elbow 15mm x ½”. TX041: obtuse elbow 15mm - 54mm. TX040: obtuse street elbow 15mm - 54mm. TX130: equal tee 15mm - 54mm . TX130: tee reduced branch 22 x 22 x 15mm - 54 x 54 x 35mm. TX130: tee one end reduced 22 x 15 x 22mm - 28 x 22 x 28mm. TX130G: female branch tee 15 x 15mm x ½” BSP - 42 x 42mm x ½” BSP. TX301: stop end 15mm - 54mm. TX302: air release stop end 15mm - 28mm. Tectite Classic T270: straight coupling 10mm - 28mm. T240: reducing coupling 12mm x 10mm - 28mm x 22mm. T270S: slip coupling 12mm - 28mm. T270G: straight female connector 10mm x 3/8” - 28mm x 1”. T243G: straight male connector parallel 10mm x 3/8” - 28mm x 1”. T243G: straight male connector taper 10mm x 3/8” - 28mm x 1”. T5: tank connector 15mm x ½” - 28mm x 1”. T243: reducer 12mm x 10mm - 28mm x 22mm. T090: elbow 10mm - 28mm. T092: street elbow 10mm - 28mm. T092: street elbow male end 10mm - 28mm. T092G: Male elbow 10mm x 3/8” - 28mm x 1”. T471G: backplate elbow 10mm x ½” BSP - 22mm x 3/4” BSP. T041: obtuse elbow 12mm - 28mm. T040: obtuse street elbow 12mm - 28mm. T130: equal tee 10mm - 28mm. T130: reduced tee 12 x 12 x 10mm - 28 x 28 x 22mm. T130: tee one end reduced 15mm x 10mm x 15mm. T130: one end and branched reduced 15mm x 10mm x 10mm. T130G: female branch tee 12mm x 12mm x ½” BSP. T301: stop end 10mm - 28mm. T302: air release stop end 10mm - 28mm. T062: tap connector 10mm x ½” - 22mm x ¾” BSP. T68FF: flat faced union adaptor 15mm x ¾” BSP. T063: bent tap connector 10mm x ½” BSP - 22mm x ¾” BSP. TM80: manifold 22mm x 22mm x 10mm. TM81: manifold 22mm x 22mm x 10mm x 10mm.

Marking: Tectite Classic fittings: Tectite, size, CR & V. Tectite Pro fittings 15mm - 28mm: Tectite, size and T. Tectite Pro fittings 32mm - 54mm: Tectite, size and USA.

Installation Requirements : R001           

Note: Tectite classic fittings for use with polybutylene tube must be installed with plastic inserts. Tectite classic fittings for use with PEX tube must be installed with stainless steel inserts.

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1404070

            

Print this entry

Range of bulkhead fittings incorporating polypropylene bodies and EPDM gaskets. Cold water use only.

Size: ½”, ¾”, 1”, 1¼”, 1½” & 2” (left hand thread).

Model: PFG Easyfit BSP Bulkhead fittings

Marking: 2” model: Winnipeg & Tools Ltd. Winnipeg Canada & size on body. All other models: Winnipeg & Tools Ltd. Winnipeg Canada & size on backnut.

Installation Requirements : R001           

Note: Open outlet use only.

Proviso:  

Manufacturer: Winnipeg Plastics Limited

List all fittings by this manufacturer

Factor: Parton Fibreglass Ltd

List all fittings by this factor

WRAS Approval Number  1312080

            

Print this entry

`PURAPRESS S8000CuSi` range of transition fittings with lead free silicon bronze bodies and EPDM `O`-rings, for use with copper pipe (manufactured in accordance with EN1057). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Size: See model/product designation

Model: 8090g - elbow 90 ° - 12mm x 3/8” BSP female to 54mm x 2” BSP female 8092g - elbow 90 ° - 12mm x 3/8” BSP male 8472g - ceiling elbow 90 ° - 12mm x ½” BSP female to 22mm x ¾” BSP female 8243g - male adaptor - 12mm x 3/8” BSP male to 108mm x 4” BSP male 8270g - female adaptor - 12mm x 3/8” BSP female to 88.9mm x 3” BSP female 8130g - tee - 12mm x ½” BSP female x 12mm to 54mm x ½” BSP female x 54mm 8096g - union female flat sealing - 12mm x ½” BSP female to 54mm x 2” BSP female 8330g - union female flat sealing - 12mm x ½” BSP female to 54mm x 2” BSP female 8333g - union male flat sealing - 12mm x 3/8” male BSP to 54mm x 2” BSP female 8359g - union flat sealing - 12mm x ½” BSP female 88.9 x 3 ½” BSP female 8246g - coupling plug - 12mm x ½” BSP female to 54mm x 2” BSP female. 8280g - coupling - 12mm x ½” BSP male to 54mm x 2” BSP male 8473g - wall plate elbow - 15mm x ½” BSP female - 22mm x ¾” BSP female 8330 - union flat seat - 12mm to 54mm RG-PF - DN25 / 28mm to DN100 / 108mm 8976g - installation set - 15mm x ½” BSP female 8980g - installation set for wall plates - 15mm x ½” BSP female

Marking: SANHA, size and DVGW on fitting body.

Installation Requirements : R180           

Note:  

Proviso:  

Manufacturer: SANHA Fittings Ternat

List all fittings by this manufacturer

Factor: Sanha GmbH & Co KG

List all fittings by this factor

WRAS Approval Number  1401918

            

Print this entry

Range of bellows with an EPDM body and flange connection. Maximum working pressure 16.0 bar, Maximum operating temperature 80°C.

Size: DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150 DN200

Model: KF-RJT 1100 SERIES

Marking: Size, pressure, WRAS No. compression on rubber body Size, Pressure rating stamp onto flange KEFA nameplate fixed onto flange

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Tianjin KEFA Valve Co., Ltd.

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1311068

            

Print this entry

Range of Redman fittings with mild steel bodies (polyamide coating) for use with standard polyethylene pipe PE80/PE100 and PE-AL-PE barrier pipe. Jointing is achieved by hydraulic compression. For above and below ground and cold water use. Maximum working pressure 12.5bar when used with PE80/PE100 pipe & 16.0bar when used with PE-AL-PE pipe.

Size: 63mm , 90mm , 110mm , 125mm , 160mm & 180mm

Model: C7019 45° elbows C7020 90° elbows C7021 straight couplers C7022 duck foot bend C7023 flange adaptors C7024 flange branch tee C7025 reducers C7027 repair couplers C7028 equal tees

Marking: Fittings for use with polyethylene PE80/PE100: Puriton, barrier pipe system, size, warning info and `manufactured by Redman Fittings` on body of fittings. Fittings for use with PE-AL-PE barrier pipe: Redman logo, size, pressure, contacts details and warning information on body of fittings.

Installation Requirements : R001           

Note: Because there are no accepted tests, WRAS approval of barrier pipe with these fittings does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe or fittings from the surrounding soil.

Proviso:  

Manufacturer: Malvern Tubular Components

List all fittings by this manufacturer

Factor: Redman Fittings Ltd.

List all fittings by this factor

WRAS Approval Number  1112109

            

Print this entry

`FloPlast Supreme` range of compression fittings with polypropylene bodies and EPDM seals for use with PE100 pipe. For use above and below ground. Maximum working pressure 16.0 bar. For cold water use only.

Size: 20mm - 110mm.

Model: FloPlast Supreme

Marking: Supreme, size, Made in Italy and product information on compression nut.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: FloPlast Ltd

List all fittings by this factor

WRAS Approval Number  1201326

            

Print this entry

Range of Talbot pushfit fittings with polypropylene or acetal bodies and EPDM O-rings for use with MDPE pipe. Supplied with pipe inserts. For above and below ground use. Maximum working pressure 16.0 bar & cold water use only.

Size:  

Model: Talbot Polypropylene Type 1: 20mm, 25mm, 32mm, 50mm & 63mm. Talbot Polypropylene Type 2: 20mm, 25mm & 32mm. Talbot Acetal Type 1: 20mm, 25mm, 32mm, 50mm & 63mm.

Marking: Talbot or Talbot Pushfit, size and pressure rating on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Atlantic Plastics Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1309113

            

Print this entry

`Anpro` range of stainless steel crimp fittings for use with stainless steel pipe (complying with EN10204). The fittings incorporate EPDM `O`-rings. For above or below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Size:  

Model: C000 straight coupling - 15mm to 108mm. MA straight male adapter - 15mm x ½”male BSP to 88.9mm X 3” male BSP. FA straight female adaptor - 15mm x ½” to 54mm x 2” female BSP. SC00 sleeve coupling - 15mm to 108mm. EC end cap - 15mm to 108mm. E90D 90° bend - 15mm x 15mm to 108mm x 108mm. MXF-EMF90 90° male bend - 15mm x 15mm to 108mm x 108mm. E45D 45° bend - 15mm x 15mm to 108mm x 108mm. MXF-EMF45 45° male bend - 15mm x 15mm to 108mm to 108mm. MEA00 male elbow - 15mm x ½” BSP male to 54mm x 2” male BSP. FEA00 female elbow - 15mm x ½” female BSP to 35mm x 1 ¼” female BSP. JCM male joint connector - 15mm x ½” male BSP to 54mm x 2” male BSP. RMF straight coupling reducer - 18mm x 15mm to 108mm x 88.9mm. WPF 90° female wall plate - 15mm x ½” female BSP to 22mm x ¾” female BSP. EFTA female T coupling - 15mm x ½” female BSP x 15mm to 108mm x ¾”female BSP x 108mm. ET equal tee - 15mm x15mm x 15mm to 108mm x108mm x 108mm. ETR reduced tee - 18mm x 15mm x 18mm to 108mm x 88.9mm x 108mm. FJ PN16 flange /press joint - 15mm to 108mm. BPB By-pass bend - 15mm x15mm to 28mm x 28mm. EFF90 male bend - 15mm x 15mm to 54mm x 54mm.

Marking: Anpro and size on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: Anpro Company Limited

List all fittings by this factor

WRAS Approval Number  1206059

            

Print this entry

`EURO` range of black polyethylene electrofusion fittings for use with PE100 pipe, for use above and below ground. Cold water use only. Maximum working pressure depends on SDR rating: SDR 7.4 25.0 bar; SDR 9 20.0 bar; SDR 11 16.0 bar; SDR 17 10.0 bar.

Size:  

Model: Electrofusion Socket (code 21.10) PE100: SDR7.4, DN: 20, 25, 32, 40, 50, 63, 75, 90, 110, 125, 140, 160. SDR9 - DN: 180, 200, 225, 250, 315. SDR11 - DN: 75, 90, 110, 125, 140, 160. SDR17- DN400. 90° Electrofusion Elbow (code 21.11) PE100: SDR7.4 - DN: 25, 32, 40, 50, 63, 75, 90, 110. SDR11 - DN: 125, 140, 160, 180, 200. 45° Electrofusion Elbow (code 21.16) PE100: SDR7,4 - DN: 32, 40, 50, 63, 75, 90, 110. SDR11 - DN: 125, 160. 90° Electrofusion Tee (code 21.21) PE100: SDR9 & SRD11 DN: 75, 90, 110, 125, 140, 160, 180, 200. Electrofusion Cap (code 21.36) PE100: SDR7.4 - DN: 20, 25, 32, 40, 50, 63, 75, 90, 110, 125, 140, 160. SDR11 - DN: 75, 90, 110, 125, 140, 160. Electrofusion Reducer (code 21.51) PE100: SDR11 - DN: 75 x 63, 90 x 50, 90 x 63, 90 x 75, 110 x 63, 110 x 90, 125 x 90, 125 x 110, 160 x 90, 160 x 110, 160 x 125. Models below added July 2014: Electrofusion Reducer (code 21.51) PE100: SDR11 - DN: 32 x 20, 32 x 25, 40 x 20, 40 x 25, 40 x 32, 50 x 25, 50 x 32, 50 x 40, 63 x 32, 63 x 40, 63 x 50. Electrofusion Spigot Saddle (code 21.20) PE 100: SDR11 - DN: 40, 50, 63, 75, 90, 110, 125, 140, 160, 180, 200, 225, 250. Electrofusion Coupler (code 21.80) PE100: SDR11 PN16 - DN: 75, 90, 110, 125, 140, 160. Electrofusion 90° Tee (code 21.21) PE100: SDR11 - DN: 25, 32, 40, 50, 63.

Marking: Size, pressure, type, `euro` on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Eurostandard Spa

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1309085

            

Print this entry

`PRESS-COPPER C6000/B8000` range of crimp fittings with copper bodies incorporating black EPDM `O`-rings for use with copper tube. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Size:  

Model: C6270 straight coupling- 15mm to 35mm. B8275 sleeve coupling - 15mm to 28mm. B8243 straight male adaptor - 15mm x ½” BSP male to 35mm x 1 ¼” BSP male. B8270 straight female adaptor - 15mm x ½” BSP female to 35mm x 1 ¼” BSP female. B8301 end cap - 15mm to 28mm. C6002 90° bend - 15mm to 35mm. C6001 90° elbow - 15mm to 35mm. C6040 45° elbow - 15mm to 35mm. B8092 90° BSP thread - 15mm x ½” BSP male to 28mm x 1” BSP male. B8090 90° BSP thread - 15mm x ½” BSP female to 28mm x 1” BSP female. B8472 wall plate 90° - ½” BSP female x 15mm. B8240 reduction coupling - 22mm x15mm to 28mm x 22mm. C6243 reduction coupling - 18mm x 15mm to 35mm x 28mm. B8130 tee piece BSP thread - 15mm x ½” BSP female x 15mm to 35mm x ½” BSP female x 35mm. C6130 press coupling - 15mm x 15mm x 15mm to 35mm x 35mm x 35mm. C6131 reducing tee - 18mm x 15mm x 18mm to 35mm x 28mm x 35mm. C6041 45° bend - 15mm x 15mm to 35mm x 35mm.

Marking: PC, DVGW, size and date of manufacture (MM/YY) on fitting body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: Anpro Pressfit PTE. Ltd

List all fittings by this factor

WRAS Approval Number  1309084

            

Print this entry

`PRESS-INOX 12000` range of stainless steel crimp fittings for use with stainless steel pipe (complying with EN10204), fittings incorporate EPDM `O`-rings. For above or below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Size:  

Model: 12000 straight coupling - 15mm to 108mm. 12010 straight male adapter - 15mm x ½”male BSP to 88.9mm X 3” male BSP. 12020 straight female adaptor - 15mm x ½” to 54mm x 2” female BSP. 12040 sleeve coupling - 15mm to 108mm. 12070 flat coupling - 15mm x ¾” BSP captive nut to 35mm x 1 ½” BSP captive nut. 12410 end cap - 15mm to 108mm. 12200 90° bend - 15mm x 15mm to 108mm x 108mm. 12210 90° male bend - 15mm x 15mm to 108mm x 108mm. 12230 45° bend - 15mm x 15mm to 108mm x 108mm. 12240 45° male bend - 15mm x 15mm to 108mm to 108mm. 12310 male elbow - 15mm x ½” BSP male to 54mm x 2” male BSP. 12320 female elbow - 15mm x ½” female BSP to 35mm x 1 ¼” female BSP. 12080 male joint connector - 15mm x ½” male BSP to 54mm x 2” male BSP. 12430 straight coupling reducer - 18mm x 15mm to 108mm x 88.9mm. 12340 90° female wall plate - 15mm x ½” female BSP to 22mm x ¾” female BSP. 12120 female T coupling - 15mm x ½” female BSP x 15mm to 108mm x ¾”female BSP x 108mm. 12100 equal tee - 15mm x15mm x 15mm to 108mm x108mm x 108mm. 12110 reduced tee - 18mm x 15mm x 18mm to 108mm x 88.9mm x 108mm. 12400 PN16 flange /press joint - 15mm to 108mm. 12360 By-pass bend - 15mm x15mm to 28mm x 28mm. 12350 male bend - 15mm x 15mm to 54mm x 54mm.

Marking: PI, press inox logo, 316L, DVGW and size on fitting body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: Anpro Pressfit PTE. Ltd

List all fittings by this factor

WRAS Approval Number  1209054

            

Print this entry

Range of black polyethylene electrofusion fittings for use with PE100 pipe, for use above and below ground. Maximum working pressure: SDR11 - 16 Bar & SDR17 - 10 Bar. For cold water use only

Size: 20mm - 315mm

Model: Eleg Plus range

Marking: GF, PE100, size, product info on bodies

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: George Fischer Wavin AG

List all fittings by this manufacturer

Factor: George Fischer Sales Ltd

List all fittings by this factor

WRAS Approval Number  1206064

            

Print this entry

Plast/Joint range of restraint non restraint coupling and restraint/non restraint flange adaptors with red epoxy coated ductile iron bodies with EPDM seals, for use with PVC and PE for above and below ground use. Cold water use only. Maximum working pressure 16.0 bar.

Size: PJ8000 D. 63Straight Coupling - non-restraintPJ8000 D. 75 Straight Coupling - non-restraintPJ8000 D. 90Straight Coupling - non-restraintPJ8000 D.110Straight Coupling - non-restraintPJ8000 D.125Straight Coupling - non-restraintPJ8000 D.140 Straight Coupling - non-restraintPJ8000 D.160 Straight Coupling - non-restraintPJ8000 D.180Straight Coupling - non-restraintPJ8000 D.200Straight Coupling - non-restraintPJ8000 D.225 Straight Coupling - non-restraintPJ8000 D.250Straight Coupling - non-restraintPJ8000 D.280 Straight Coupling - non-restraintPJ8000 D.315Straight Coupling - non-restraintPJ8007 D. 63 A4 Straight Coupling – restraintPJ8007 D. 75 A4Straight Coupling – restraintPJ8007 D. 90 A4Straight Coupling – restraintPJ8007 D.110 A4 Straight Coupling – restraintPJ8007 D.125 A4 Straight Coupling – restraintPJ8007 D.140 A4 Straight Coupling – restraintPJ8007 D.160 A4 Straight Coupling – restraintPJ8007 D.180 A4 Straight Coupling – restraintPJ8007 D.200 A4 Straight Coupling – restraintPJ8007 D.225 A4 Straight Coupling – restraintPJ8007 D.250 A4 Straight Coupling – restraintPJ8007 D.280 A4 Straight Coupling – restraintPJ8007 D.315 A4 Straight Coupling – restraintPJ8007 D. 63 A2 Straight Coupling – restraintPJ8007 D. 75 A2 Straight Coupling – restraintPJ8007 D. 90 A2 Straight Coupling – restraintPJ8007 D.110 A2 Straight Coupling – restraintPJ8007 D.125 A2 Straight Coupling – restraintPJ8007 D.140 A2 Straight Coupling – restraintPJ8007 D.160 A2 Straight Coupling – restraintPJ8007 D.180 A2 Straight Coupling – restraintPJ8007 D.200 A2 Straight Coupling – restraintPJ8007 D.225 A2 Straight Coupling – restraintPJ8007 D.250 A2 Straight Coupling – restraintPJ8007 D.280 A2 Straight Coupling – restraintPJ8007 D.315 A2 Straight Coupling – restraintPJ8050 D. 63 / DN 50 Flange Adapter - non-restraintPJ8050 D. 75 / DN 65 Flange Adapter - non-restraintPJ8050 D. 90 / DN 80 Flange Adapter - non-restraintPJ8050 D.110 / DN100 Flange Adapter - non-restraintPJ8050 D.125 / DN100 Flange Adapter - non-restraintPJ8050 D.140 / DN125 Flange Adapter - non-restraintPJ8050 D.160 / DN150 Flange Adapter - non-restraintPJ8050 D.180 / DN150 Flange Adapter - non-restraintPJ8050 D.200 / DN200 Flange Adapter - non-restraintPJ8050 D.200 / DN200 Flange Adapter - non-restraintPJ8050 D.225 / DN200 Flange Adapter - non-restraintPJ8050 D.225 / DN200 Flange Adapter - non-restraintPJ8050 D.250 / DN250 Flange Adapter - non-restraintPJ8050 D.250 / DN250 Flange Adapter - non-restraintPJ8050 D.280 / DN250 Flange Adapter - non-restraintPJ8050 D.280 / DN250 Flange Adapter - non-restraintPJ8050 D.315 / DN300 Flange Adapter - non-restraintPJ8050 D.315 / DN300 Flange Adapter - non-restraintPJ8057 D. 63 / DN 50 Flange Adapter – restraintPJ8057 D. 75 / DN 65 Flange Adapter – restraintPJ8057 D. 90 / DN 80 Flange Adapter – restraintPJ8057 D.110 / DN100 Flange Adapter – restraintPJ8057 D.125 / DN100 Flange Adapter – restraintPJ8057 D.140 / DN125 Flange Adapter – restraintPJ8057 D.160 / DN150 Flange Adapter – restraintPJ8057 D.180 / DN150 Flange Adapter – restraintPJ8057 D.200 / DN200 Flange Adapter – restraintPJ8057 D.200 / DN200 Flange Adapter – restraintPJ8057 D.225 / DN200 Flange Adapter – restraintPJ8057 D.225 / DN200 Flange Adapter – restraintPJ8057 D.250 / DN250 Flange Adapter – restraintPJ8057 D.250 / DN250 Flange Adapter – restraintPJ8057 D.280 / DN250 Flange Adapter – restraintPJ8057 D.280 / DN250 Flange Adapter – restraintPJ8057 D.315 / DN300 Flange Adapter – restraintPJ8057 D.315 / DN300 Flange Adapter – restraintPJ8057 D. 63 / DN 50 Flange Adapter – restraintPJ8057 D. 75 / DN 65 Flange Adapter – restraintPJ8057 D. 90 / DN 80 Flange Adapter – restraintPJ8057 D.110 / DN100 Flange Adapter – restraintPJ8057 D.125 / DN100 Flange Adapter – restraintPJ8057 D.140 / DN125 Flange Adapter – restraintPJ8057 D.160 / DN150 Flange Adapter – restraintPJ8057 D.180 / DN150 Flange Adapter – restraintPJ8057 D.200 / DN200 Flange Adapter – restraintPJ8057 D.200 / DN200 Flange Adapter – restraintPJ8057 D.225 / DN200 Flange Adapter – restraintPJ8057 D.225 / DN200 Flange Adapter – restraintPJ8057 D.250 / DN250 Flange Adapter – restraintPJ8057 D.250 / DN250 Flange Adapter – restraintPJ8057 D.280 Flange Adapter – restraintPJ8057 D.280 Flange Adapter – restraintPJ8057 D.315 Flange Adapter – restraintPJ8057 D.315Flange Adapter – restraint

Model: PJ8000 D. 63Straight Coupling - non-restraintPJ8000 D. 75 Straight Coupling - non-restraintPJ8000 D. 90Straight Coupling - non-restraintPJ8000 D.110Straight Coupling - non-restraintPJ8000 D.125Straight Coupling - non-restraintPJ8000 D.140 Straight Coupling - non-restraintPJ8000 D.160 Straight Coupling - non-restraintPJ8000 D.180Straight Coupling - non-restraintPJ8000 D.200Straight Coupling - non-restraintPJ8000 D.225 Straight Coupling - non-restraintPJ8000 D.250Straight Coupling - non-restraintPJ8000 D.280 Straight Coupling - non-restraintPJ8000 D.315Straight Coupling - non-restraintPJ8007 D. 63 A4 Straight Coupling – restraintPJ8007 D. 75 A4Straight Coupling – restraintPJ8007 D. 90 A4Straight Coupling – restraintPJ8007 D.110 A4 Straight Coupling – restraintPJ8007 D.125 A4 Straight Coupling – restraintPJ8007 D.140 A4 Straight Coupling – restraintPJ8007 D.160 A4 Straight Coupling – restraintPJ8007 D.180 A4 Straight Coupling – restraintPJ8007 D.200 A4 Straight Coupling – restraintPJ8007 D.225 A4 Straight Coupling – restraintPJ8007 D.250 A4 Straight Coupling – restraintPJ8007 D.280 A4 Straight Coupling – restraintPJ8007 D.315 A4 Straight Coupling – restraintPJ8007 D. 63 A2 Straight Coupling – restraintPJ8007 D. 75 A2 Straight Coupling – restraintPJ8007 D. 90 A2 Straight Coupling – restraintPJ8007 D.110 A2 Straight Coupling – restraintPJ8007 D.125 A2 Straight Coupling – restraintPJ8007 D.140 A2 Straight Coupling – restraintPJ8007 D.160 A2 Straight Coupling – restraintPJ8007 D.180 A2 Straight Coupling – restraintPJ8007 D.200 A2 Straight Coupling – restraintPJ8007 D.225 A2 Straight Coupling – restraintPJ8007 D.250 A2 Straight Coupling – restraintPJ8007 D.280 A2 Straight Coupling – restraintPJ8007 D.315 A2 Straight Coupling – restraintPJ8050 D. 63 / DN 50 Flange Adapter - non-restraintPJ8050 D. 75 / DN 65 Flange Adapter - non-restraintPJ8050 D. 90 / DN 80 Flange Adapter - non-restraintPJ8050 D.110 / DN100 Flange Adapter - non-restraintPJ8050 D.125 / DN100 Flange Adapter - non-restraintPJ8050 D.140 / DN125 Flange Adapter - non-restraintPJ8050 D.160 / DN150 Flange Adapter - non-restraintPJ8050 D.180 / DN150 Flange Adapter - non-restraintPJ8050 D.200 / DN200 Flange Adapter - non-restraintPJ8050 D.200 / DN200 Flange Adapter - non-restraintPJ8050 D.225 / DN200 Flange Adapter - non-restraintPJ8050 D.225 / DN200 Flange Adapter - non-restraintPJ8050 D.250 / DN250 Flange Adapter - non-restraintPJ8050 D.250 / DN250 Flange Adapter - non-restraintPJ8050 D.280 / DN250 Flange Adapter - non-restraintPJ8050 D.280 / DN250 Flange Adapter - non-restraintPJ8050 D.315 / DN300 Flange Adapter - non-restraintPJ8050 D.315 / DN300 Flange Adapter - non-restraintPJ8057 D. 63 / DN 50 Flange Adapter – restraintPJ8057 D. 75 / DN 65 Flange Adapter – restraintPJ8057 D. 90 / DN 80 Flange Adapter – restraintPJ8057 D.110 / DN100 Flange Adapter – restraintPJ8057 D.125 / DN100 Flange Adapter – restraintPJ8057 D.140 / DN125 Flange Adapter – restraintPJ8057 D.160 / DN150 Flange Adapter – restraintPJ8057 D.180 / DN150 Flange Adapter – restraintPJ8057 D.200 / DN200 Flange Adapter – restraintPJ8057 D.200 / DN200 Flange Adapter – restraintPJ8057 D.225 / DN200 Flange Adapter – restraintPJ8057 D.225 / DN200 Flange Adapter – restraintPJ8057 D.250 / DN250 Flange Adapter – restraintPJ8057 D.250 / DN250 Flange Adapter – restraintPJ8057 D.280 / DN250 Flange Adapter – restraintPJ8057 D.280 / DN250 Flange Adapter – restraintPJ8057 D.315 / DN300 Flange Adapter – restraintPJ8057 D.315 / DN300 Flange Adapter – restraintPJ8057 D. 63 / DN 50 Flange Adapter – restraintPJ8057 D. 75 / DN 65 Flange Adapter – restraintPJ8057 D. 90 / DN 80 Flange Adapter – restraintPJ8057 D.110 / DN100 Flange Adapter – restraintPJ8057 D.125 / DN100 Flange Adapter – restraintPJ8057 D.140 / DN125 Flange Adapter – restraintPJ8057 D.160 / DN150 Flange Adapter – restraintPJ8057 D.180 / DN150 Flange Adapter – restraintPJ8057 D.200 / DN200 Flange Adapter – restraintPJ8057 D.200 / DN200 Flange Adapter – restraintPJ8057 D.225 / DN200 Flange Adapter – restraintPJ8057 D.225 / DN200 Flange Adapter – restraintPJ8057 D.250 / DN250 Flange Adapter – restraintPJ8057 D.250 / DN250 Flange Adapter – restraintPJ8057 D.280 Flange Adapter – restraintPJ8057 D.280 Flange Adapter – restraintPJ8057 D.315 Flange Adapter – restraintPJ8057 D.315Flange Adapter – restraint

Marking: DN size and Georg Fischer logo on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Georg Fischer Waga NV

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1207051

            

Print this entry

Conex range of >B< press copper and red brass fittings for use with copper tube. For above ground use only. Maximum working pressure 16.0 bar, Maximum operating temperature 95°C

Size: 15mm – 54mm.

Model: P1, P2, P12,PIR P3, P15, P6, P13, P14, P24, P27, P21, P25, P28, P21S, P26, P30, P61, P69, P69F & P12S.

Marking: press logo, DVGW and KIWA on fitting bodies.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: IPB Atcosa SL

List all fittings by this manufacturer

Factor: Conex Universal Ltd

List all fittings by this factor

WRAS Approval Number  1209071

            

Print this entry

AESPRES range of crimp fittings with bronze or copper bodies and EPDM `O` rings. For use with copper tube above and below ground. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Size: 669 Adaptor male x male BSP sizes 15mm x ½” - 42mm x 1½”; 681/450 Elbow 45° sizes 15mm - 54mm; 681/451 Elbow 45° male x female sizes 15mm - 54mm; 681/900 Elbow 90° sizes 15mm - 54mm; 681/901 Elbow 90° male x female sizes 15mm - 54mm; 682/000 Equal tee sizes 15mm - 54mm; 683/000 Coupling sizes 15mm - 54mm; 683/001 Slip coupling sizes 15mm - 54mm; 683/002 Union adaptor sizes 15mm x ¾” - 54mm - 2”; 683/003 Stop end sizes 15mm - 54mm; 684/000 Straight male union connector sizes 15mm x ½” - 54mm x 2”; 684/001 Straight male union connector sizes 15mm x ½” - 54mm x 2”; 685 Wall plate elbow 90° 15mm x ½” - 22mm x ¾”; 685 Extension wall plate elbow 90° 15mm x ½” - 22mm x ¾”; 687 Male adaptor sizes 15mm x 3/8” - 54mm x 2”; 689 Tee with BSP branch sizes 15mm x ½” x 15mm - 54mm x ¾” x 54mm; 690 Female adaptor sizes 15mm x 3/8” - 54mm x 2”; 691 Reducer male x female sizes 18mm x 15mm - 54mm x 42mm; 693 Male x Female adaptors sizes 15mm x ½” - 54mm x 2”; 694/150 Elbow 15° male x male sizes 28mm - 54mm; 694/300 Elbow 30° male x male sizes 28mm - 54mm; 694/450 Elbow 45° male x male sizes 28mm - 54mm; 694/600 Elbow 60° male x male sizes 28mm - 54mm; 694/750 Elbow 75° male x male sizes 15mm - 54mm; 694/900 Elbow 90° Male x male sizes 15mm - 54mm; 697 Elbow 90° female x male BSP sizes 15mm x 3/8” - 54mm x 2”; 698 Elbow 90° female x female BSP sizes 15mm x 3/8” - 54mm x 2”; 692 Tee with reduced branch sizes 18x15x18mm - 54x42x54mm.

Model: AESPRES

Marking: Copper fittings AESPRES, size, DVGW, made in Italy printed on bodies. Bronze fittings - RM, Italy, A, logo, DVGW, size and year of manufacture.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Raccorderie Metalliche Spa

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1210325

            

Print this entry

Range of pushfit fittings with polypropylene bodies and EPDM O-rings for use with John Guest LLDPE pipe. For above ground use only. Maximum working pressure 10.0 bar. Cold water use only.

Size: Straight Adaptors: ¼” x 1/8” to ½” x ½”. Tee Connector: ¼” to ½”. Elbow Connector: ¼” to ½”. Straight Connector: ¼” to ½”. Stem Adaptor: ¼” x 1/8” to ½” x ½”. Reducer: 3/8” x ¼” to 5/8” x ½”. Plug: ¼” to ½”. Bulkhead Connector: ¼” to ½”. Stem Elbow: ¼” x ¼” to ½' x ½”. Equal Divider: 3/8” Hose Stem: 3/8” x 3/8” to ½” x ½”. UNS Tap Connector: ¼” x 7/16”. Female Adaptor: ¼” x 1/8” to 3/8” x 3/8”. Elbow Adaptor: 1/4” x 1/8” to 3/8” x 3/8”. 3 Way Splitter: 3/8” x ¼”

Model: PP range.

Marking: JG, PPMF, size & NSF 51/61 on body

Installation Requirements : R001           

Note: To be installed where light is excluded

Proviso:  

Manufacturer: John Guest Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1210326

            

Print this entry

Range of plastic push fit fittings (available in black, white and grey) with EPDM `O` rings, for use with copper pipe (manufactured to BS EN 1057), PE-X pipe (BS7291-3) & PB pipe (BS7291-2). Maximum working pressure 10.0 bar. Cold water use only.

Size:  

Model: PM012818E 28mm x 1" bsp STR. ADAP. PM0210E 10mm EQUAL TEE CONN. PM0215E 15mm EQUAL TEE CONN. PM0222E 22mm EQUAL TEE CONN. PM0228E 28mm TEE CONNECTOR PM0310E 10mm EQUAL ELBOW CONN. PM0315E 15mm EQUAL ELBOW CONN. PM0322E 22mm EQUAL ELBOW CONN. PM0328E 28mm ELBOW CONNECTOR PM0410E 10mm EQUAL STRAIGHT CONN. PM0415E 15mm EQUAL STRAIGHT CONN. PM0422E 22mm EQUAL STRAIGHT CONN. PM0428E 28mm STRAIGHT CONNECTOR PM051002E 10mm x 1/4 bspt STEM ADAPT. PM051003E 10mm x 3/8 bspt STEM ADAPT. PM051004E 10mm x 1/2 bspt STEM ADAPT. PM051012E 10mm x 1/4 bsp STEM ADAPT. PM051013E 10mm x 3/8 bsp STEM ADAPT. PM051014E 10mm x 1/2 bsp STEM ADAPT. PM051513E 15mm x 3/8 bsp STEM ADAPT. PM051514E 15mm x 1/2 bsp STEM ADAPT. PM052214E 22mm x 1/2 bsp STEM ADAPT. PM052216E 22mm x 3/4 bsp STEM ADAPT. PM061510E 15mm - 10mm REDUCER PM062215E 22mm - 15mm REDUCER PM062815E 28mm - 15mm REDUCER PM062822E 28mm - 22mm REDUCER PM091002E 10mm x 1/4 bspt SWIVEL ELB. PM091003E 10mm x 3/8 bspt SWIVEL ELB. PM091004E 10mm x 1/2 bspt SWIVEL ELB PM091012E 10mm x 1/4 bsp SWIVEL ELB. PM091013E 10mm x 3/8 bsp SWIVEL ELB. PM091014E 10mm x 1/2 bsp SWIVEL ELB. PM101002E 10mm x 1/4 bspt SWIV. C/L TEE PM101003E 10mm x 3/8 bspt SWIV. C/L TEE PM101004E 10mm x 1/2 bspt SWIV. C/L TEE PM101012E 10mm x 1/4 bsp SWIV. C/L TEE PM101013E 10mm x 3/8 bsp SWIV. C/L TEE PM101014E 10mm x 1/2 bsp SWIV. C/L TEE PM111002E 10mm x 1/4 bspt SWIV. E/L TEE PM111003E 10mm x 3/8 bspt SWIV. E/L TEE PM111004E 10mm x 1/2 bspt SWIV. E/L TEE PM111012E 10mm x 1/4 bsp SWIV. E/L TEE PM111013E 10mm x 3/8 bsp SWIV. E/L TEE PM111014E 10mm x 1/2 bsp SWIV. E/L TEE PM1210E 10mm BULKHEAD CONNECT. PM221010E 10mm - 10mm STEM ELBOW PM221515E 15mm - 15mm STEM ELBOW PM222222E 22mm - 22mm STEM ELBOW PM2310E 10mm EQUAL DIVIDER PM2315E 15mm EQUAL DIVIDER PM451015FE 10mm x 5/8 bsp FEMALE ADAP. PM4615E 15mm END STOP PM4622E 22mm END STOP CM-SC-15S 15mm SLIP COUPLING CM011514S 15mm x 1/2 bsp STR. ADAPT. CM011516B 15mm x 3/4 bsp STR. ADAPT. CM012216S 22mm x 3/4 bsp STR. ADAPT. CM0322W 22mm EQUAL ELBOW CONN. CM201510S 15mm - 10mm STRA. CONN. CM221515W 15mm - 15mm STEM ELB. CM2315W 15mm EQUAL DIVIDER CM3201S 15mm x 1/2 bsp TAP ADAP. CM321014E 10mm x 1/2 bsp TAP ADAP CM3210U7E 10mm x 7/16 UNS TAP ADAP. CM451513FS 15mm x 3/8 bsp FEMALE ADAP. CM551516W 15mm x 3/4 bsp BULKHEAD ELB. PM011002E 10mm x 1/4 bspt STR. ADAP. PM011003E 10mm x 3/8 bspt STR. ADAP. PM011004E 10mm x 1/2 bspt STR. ADAP. PM011012E 10mm x 1/4 bsp STR. ADAP. PM011013E 10mm x 3/8 bsp STR. ADAP. PM011014E 10mm x 1/2 bsp STR. ADAP. PM011513E 15mm x 3/8 bsp STR. ADAP. PM011514E 15mm x 1/2 bsp STR. ADAP. PM011516E 15mm x 3/4 bsp STR. ADAP. PM012216E 22mm x 3/4 bsp STR. ADAP.

Marking: JG & size on Body and collet

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: John Guest Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1403701

            

Print this entry

Tectite 316 range of push-fit fittings with stainless steel bodies incorporating EPDM O rings for use with stainless steel tube. For above ground use only. Maximum working pressure 15mm - 28mm 20.0 bar, 35mm - 54mm 16.0 bar. Maximum operating temperature 15mm - 28mm 99°C, 35mm - 54mm 90°C.

Size:  

Model: TS1/TS270 - 15mm to 54mm. TS1 slip /TS270S - 15mm to 28mm. TS2/TS270G - 15mm x ½” BSP female to 54mm x 2” BSP female. TS3/TS243G - 15mm x ½” BSP male to 54mm x 2” BSP male. TS6/TS243 - 18mm x 15mm to 54mm x 42mm. TS12/TS090 - 15mm to 54mm. TS12S/TS092 - 15mm to 28mm. TS13/TS092G- 15mm x ½” BSP male to 28mm x 1” BSP male. TS14/TS090G - 15mm x ½” BSP female to 22mm x 1” BSP female. TS15/TS471G - 15mm x ½” BSP female to 22mm x ¾” BSP female. TS18/TS002A - 15mm to 54mm. TS18S/TS001 - 15mm to 28mm. TS21/TS041 - 15mm to 54mm. TS21S/TX040 - 15mm to 54mm. TS24/TS130 - 15mm to 54mm. TS25/TS130 - 18mm x 18mm x 15mm to 54mm x 54mm x 42mm. TS30/TS130G - 15mm x 15mm x ½” BSP female to 42mm x 42mm x ½” BSP female. TS61/TS301 - 15mm to 54mm.

Marking: Tectite size and grade (316) on 15mm - 28mm fitting bodies. Tectite size, grade (316) and USA on 35 - 54mm fitting bodies.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1209068

            

Print this entry

Range of pipe couplings with stainless steel bodies, EPDM seals and stainless steel teeth. Maximum working pressures: 21.3mm = 25bar, 609.6mm = 1.5bar, 406.4mm = 6bar, 273.0mm = 8.75bar & 219.1mm = 16 Bar. Cold water use only, above and below ground.

Size: 21.3mm, 219.1mm, 273.0mm, 406.4mm & 609.6mm

Model: Axilock & Axilock-s

Marking: Teekay, Axilock, size, pressure & serial numbers on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Teekay Couplings

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1210059

            

Print this entry

Excel range of push fit fittings with brass bodies and EPDM o rings. For use with Irish size copper tube. Maximum working pressure 6.0 bar. For cold water use only.

Size: ½”, ¾” & 1”

Model: P31012 - ½” Brass Push Fit Coupling: P31034 - ¾” Brass Push Fit Coupling: P3101 - 1” Brass Push Fit Coupling: P3103412 - ¾” x ½” Reduced Coupling push Fitting: P310112 - 1” x ½” Reduced Coupling Push Fitting: P310134 - 1” x ¾” Reduced Coupling Push Fitting: P31512 - ½” Brass Push Fit Elbow: P31534 - ¾” Equal Elbow Push Fitting Body: P3151 - 1” Equal Elbow Push Fitting Body: P35012 - ½” Push Fitting Tank Connector: P35034 - ¾” Push Fitting Tank Connector: P3501 - 1” Push Fit Tank Connector: P35112 - ½” Push Fit End Stop: P35134 - ¾” End Stop Push Fitting Body: P3511 - 1” End Stop Push Fitting Body: P31812 - ½” Brass Push Fit Tee: P31834 - ¾” Brass Push Fit Tee: P3181 - 1” Brass Body for Push Fit Tee: P3181234 - ½” x ½” x ¾” Reduced Tee: P318341 - ¾” x ¾” x 1” Reduced Tee: P3183412 - ¾” x ¾” x ½” Reduced Push Fit Tee: P3181112 - 1” x 1” x ½” Push Fit Reduced Tee: P3181134 - 1” x 1” x ¾” Push Fit Reduced Tee: P318341234 - ¾” x ½” x ¾” Reduced Push Fit Tee: P318341212 - ¾” x ½” x ½” Reduced Push Fit Tee: P3181121 - 1” x ½” x 1” Push Fit Reduced Tee: P3181341 - 1” x ¾” x 1” Push Fit Reduced Tee: P31813434 - 1” x ¾” x ¾” Push Fit Reduced Tee: P33012 - ½” Push Fitting x Female Iron Tee: P3483412 - ¾” x ½” Push Fitting Reducer Piece: P348112 - 1” x ½” Push Fitting Reducer Piece: P348134 - 1” x ¾” Push Fitting Reducer Piece: P317W12 - ½” F.I. to ½” Push Fit Wall Plate Elbow: P317W1234 - ½” F.I. to ¾” Push Fit Wall Plate Elbow: P317W34 - ¾” F.I. to ¾” Push Fit Wall Plate Elbow.

Marking: Size, Easi plumb Excel industries and product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Excel Industries Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1302330

            

Print this entry

Range of universal compression fittings for use with PE Pipe (manufactured to BS1972 & Irish Normal Gauge), PVC (manufactured to EN1451) and galvanised iron pipe for above and below ground use and for use with copper for above ground use. Maximum working pressure 12.5 bar. Cold water use only.

Size: 15mm-21mm & 59mm-61mm.

Model: 87113300 Coupler UTC 15-21mm x 15-21mm 87114300 Coupler UTC 21-27mm x 15-21mm 87114400 Coupler UTC 21-27mm x 21-27mm 87115300 Coupler UTC 27-34mm x 15-21mm 87115400 Coupler UTC 27-34mm x 21-27mm 87115500 Coupler UTC 27-34mm x 27-34mm 87116500 Coupler UTC 39-43mm x 27-34mm 87116600 Coupler UTC 39-43mm x 39-43mm 87117700 Coupler UTC 34-39mm x 34-39mm 87118800 Coupler UTC 47-49mm x 47-49mm 87119900 Coupler UTC 59-61mm x 59-61mm 87123100 Adaptor MI UTC 15-21mm x ½" 87123200 Adaptor MI UTC 15-21mm x ¾" 87123300 Adaptor MI UTC 15-21mm x 1" 87124200 Adaptor MI UTC 21-27mm x ¾" 87124300 Adaptor MI UTC 21-27mm x 1" 87124400 Adaptor MI UTC 21-27mm x 1¼" 87125200 Adaptor MI UTC 27-34mm x ¾" 87125300 Adaptor MI UTC 27-34mm x 1" 87125400 Adaptor MI UTC 27-34mm x 1¼" 87125500 Adaptor MI UTC 27-34mm x 1½" 87133300 Tee UTC 15-21mm 88103200 Coupler UTC x 3G Met/Imp 15-21 x 20/½" 88103300 Coupler UTC x 3G Met/Imp 15-21 x 25/¾" 88104200 Coupler UTC x 3G Met/Imp 21-27 x 20/½" 88104300 Coupler UTC x 3G Met/Imp 21-27 x 25/¾" 88105200 Coupler UTC x 3G Met/Imp 27-34 x 20/½" 88105300 Coupler UTC x 3G Met/Imp 27-34 x 25/¾" 88105400 Coupler UTC x 3G Met/Imp 27-34 x 32/1" 88105500 Coupler UTC x 3G Met/Imp 27-34 x 40/1¼" 88106400 Coupler UTC x 3G Met/Imp 39-43 x 32/1" 88106500 Coupler UTC x 3G Met/Imp 39-43 x 40/1¼" 88107400 Coupler UTC x 3G Met/Imp 34-39 x 32/1" 88107500 Coupler UTC x 3G Met/Imp 34-39 x 40/1¼" 88108600 Coupler UTC x 3G Met/Imp 47-49 x 50/1½" 88108700 Coupler UTC x 3G Met/Imp 47-49 x 63/2" 88109700 Coupler UTC x 3G Met/Imp 59-61 x 63/2" 88153300 Elbow UTC x 3G Met/Imp 15-21 x 25/¾" 88154300 Elbow UTC x 3G Met/Imp 21-27 x 25/¾" 88154400 Elbow UTC x 3G Met/Imp 21-27 x 32/1" 88155300 Elbow UTC x 3G Met/Imp 27-34 x 25/¾" 88165300 Elbow UTC x 3G Met/Imp 27-34 x 32/1"

Marking: Philmac , Universal Coupling and size on nuts.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Philmac Pty Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1212329

            

Print this entry

`Plast` range of black coloured, PE100 electrofusion and butt weld fittings for use with PE100 pipe. Maximum working pressure 16.0 bar (25mm-560mm) and 10.0 bar (630mm-800mm). For above and below ground use. Cold water use only.

Size: 20mm - 800mm.

Model: Electrofusion Fittings: Coupler (20mm - 800mm). Reducer (25x20mm - 315x250mm). Elbow 90° (20mm - 315mm). Elbow 45° (32mm - 315mm). Tee 90° (20mm - 315mm). Brace saddle (40x20mm - 800x160mm). Tapping tee saddle (40x20mm - 315x63mm). Transition coupler PE (F) - brass BSP (M) (20mm - 110mm). Transition coupler PE (F) - Brass BSP (F) (20mm - 110mm). Butt Weld Fittings: Reducer long spigot (32x25mm - 315x250mm). Elbow 90° long spigot (20mm - 315mm). Elbow 45° long spigot (20mm - 315mm). Tee 90° long spigot (20mm - 630mm). Reduced tee 90° long spigot (90x50mm - 630x250mm). Stubend flange long spigot (25mm - 400mm).

Marking: Plast and size on body of fitting

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: Plastitalia SpA

List all fittings by this factor

WRAS Approval Number  1307084

            

Print this entry

`Plastek Range` of HDPE fittings for use with PE100 pipe. Maximum working pressure 16.0 bar. Cold water use only.

Size: 'Plastek Range' Reducing tee - code TPZ - Ø280 to Ø400 Short stub - code CCC - Ø200 to Ø400 Long stub - code CCL - Ø200 to Ø400 Short reducer - code RCC - Ø200 to Ø400 Long reducer - code RCL - Ø200 to Ø315

Model: 'Plastek Range' Reducing tee - code TPZ - Ø280 to Ø400 Short stub - code CCC - Ø200 to Ø400 Long stub - code CCL - Ø200 to Ø400 Short reducer - code RCC - Ø200 to Ø400 Long reducer - code RCL - Ø200 to Ø315

Marking: Plastek, PE100, SDR11, PN16 on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Plastek Srl

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1012051

            

Print this entry

`Series 601` range of universal couplings for connecting ductile iron, cast iron, steel and AC pipes. The coupling sleeves and gland rings are manufactured from ductile iron and coated with blue epoxy. Assemblies supplied with mild steel sheraplex coated bolts. Maximum working pressure 16.0 bar. For cold water use only.

Size: Reference numbers and sealing range sizes in mm: 601-063000-4-100: 46 – 63mm, 601-074000-4-100: 57 – 74mm, 601-085000-4-100: 68 – 85mm, 601-106000-4-100: 84 – 106mm, 601-119000-4-100: 99 – 119mm, 601-133000-4-100: 109 – 133mm, 601-157000-4-100: 132 – 157mm, 601-183000-4-100 157 – 183mm, 601-201000-4-100: 176 – 201mm, 601-215000-4-100: 193 – 215mm, 601-242000-4-100: 218 – 242mm, 601-268000-4-100: 242 – 268mm, 601-292000-4-100: 266 – 292mm, 601-306000-4-100: 280 – 306mm, 601-327000-4-100: 301 – 327mm, 601-350000-4-100: 324 – 350mm, 601-378000-4-100: 352 – 378mm, 601-396000-4-100: 372 – 396mm, 601-410000-4-100: 384 – 410mm, 601-436000-4-100 410 – 436mm, 601-462000-4-100: 436 – 462mm.

Model:  

Marking: AVK, pressure rating and product information on body.AVK and product information on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: AVK Manufacturing Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1012052

            

Print this entry

`Series 602` range of universal stepped couplings for connecting ductile iron, cast iron, steel and AC pipes. The coupling sleeves and gland rings are manufactured from ductile iron and coated with a blue epoxy coating. Assemblies supplied with mild steel sheraplex coated bolts. Maximum working pressure 16.0 bar. For cold water use only. Size range 46mm to 462mm.

Size: Reference numbers and sealing range sizes in DN: Pipe A - Pipe B. (DN1 (inlet) - DN2 (Outlet)):602-063074-4-100: 40 – 50. 602-063085-4-100: 40 – 50. 602-074085-4-100: 50 – 65. 602-074106-4-100 50 – 80. 602-085106-4-100: 65 – 80. 602-106119-4-100: 80 – 100.602-106133-4-100: 100 – 100. 602-119133-4-100: 100 – 100. 602-119157-4-100: 100 – 125. 602-133157-4-100: 100 – 125. 602-133183-4-100: 100 – 150. 602-157183-4-100: 125 – 150. 602-183201-4-100: 150 – 150. 602-201215-4-100: 150 – 200. 602-201242-4-100: 150 – 200. 602-215242-4-100: 200 – 200. 602-215268-4-100: 200 – 200. 602-242268-4-100: 200 – 200. 602-268392-4-100: 200 – 250. 602-292306-4-100: 250 – 250. 602-292327-4-100: 250 – 300. 602-327350-4-100: 300 – 300. 602-327378-4-100: 300 – 350. 602-350378-4-100: 300 – 350. 602-378396-4-100: 350 – 350. 602-396410-4-100: 350 – 350. 602-410436-4-100: 350 – 400. 602-436462-4-100: 400 – 400.

Model:  

Marking: AVK, pressure rating and product information on body.AVK and product information on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: AVK Manufacturing Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1012053

            

Print this entry

`Series 603` range of universal flange adaptors for connecting ductile iron, cast iron, steel and AC pipes. The coupling sleeves and gland rings are manufactured from ductile iron and coated with a blue epoxy coating. Assemblies supplied with mild steel sheraplex coated bolts. Maximum working pressure 16.0 bar. For cold water use only. Size range: 46mm to 462mm.

Size: Reference numbers and sealing range sizes in mm: 603-063000-4-100: 46 – 63mm, 603-074000-4-100: 57 – 74mm, 603-074001-4-100: 57 – 74mm, 603-085000-4-100: 68 – 85mm, 603-106000-4-100: 84 – 106mm, 603-106001-4-100: 84 – 106mm, 603-119000-4-100: 99 – 119mm, 603-133000-4-100: 109 – 133mm, 603-133001-4-100: 109 – 133mm, 603-157000-4-100: 132 – 157mm, 603-183000-4-100 157 – 183mm, 603-183002-4-100 157 – 183mm, 603-201000-4-100: 176 – 201mm, 603-215000-4-100: 193 – 215mm, 603-242000-4-100: 218 – 242mm, 603-242002-4-100: 218 – 242mm, 603-268000-4-100: 242 – 268mm, 603-292000-4-100: 266 – 292mm, 603-292002-4-100: 266 – 292mm, 603-306000-4-100: 280 – 306mm, 603-327000-4-100: 301 – 327mm, 603-327002-4-100: 301 – 327mm, 603-350000-4-100: 324 – 350mm, 603-378000-4-100: 352 – 378mm, 603-378002-4-100: 352 – 378mm, 603-396000-4-100: 372 – 396mm, 603-396002-4-100: 372 – 396mm, 603-410000-4-100: 384 – 410mm, 603-410002-4-100: 384 – 410mm, 603-436000-4-100 410 – 436mm, 603-436002-4-100 410 – 436mm, 603-462000-4-100: 436 – 462mm.

Model:  

Marking: AVK, pressure rating and product information on body.AVK and product information on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: AVK Manufacturing Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1111100

            

Print this entry

Range of black PE100 reducing branch tees, with welded (plastic) joints. For use above and below ground. Cold water use only. Maximum working pressure 16.0 bar.

Size: 250mm to 630mm (Tee's) 90mm to 250mm (Branches).

Model: “ECCS” full branch reducing branch tees.

Marking: ECCS on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: East Coast Construction Services Ltd

List all fittings by this factor

WRAS Approval Number  1109401

            

Print this entry

Range of Durafuse black polyethylene electrofusion fittings for use with PE pipe manufactured to BS6730, BS6572 & BS EN 12201. For below ground cold water use only. Maximum working pressure 12.5 bar.

Size: 20mm, 25mm, 32mm, 50mm, 63mm

Model: Durafuse Electrofusion Fittings, Couplers, Reducers, 90º Elbows, 45º Elbows, Equal Tees, Tapping Tees, End Caps, Transition Couplers female, Transition Couplers male, 90º Transition Elbows female, 90º Transition Elbows male, 45º Transition Elbows female & 45º Transition Elbows male

Marking: Durafuse, size and SDR rating on fitting

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: GPS

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1302025

            

Print this entry

“GPS protecta line “range of powder coated steel inserts with stainless steel repair clamps for use with barrier pipe PE80 and PE100 with varied SDR ratings. For above or below ground use and cold water only. Maximum working pressures: PE 80 SDR: 11 - 12.5 bar & PE 100 SDR: 10 - 17bar.

Size: Couplers, reducers, 90° & 45° elbows, equal tees & stub flange adaptors: 63mm - 180mm. Flanged branch tees: 90mm - 180mm. Duck foot bend: 63mm - 110mm. Shells: 63mm - 180mm.

Model: Protecta line Range

Marking: GPS, size, SDR rating and product information on shell bodies

Installation Requirements : R001           

Note: Because there are no accepted tests, WRAS approval of barrier pipe with these fittings does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe or fittings from the surrounding soil.

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: GPS PE Pipe Systems

List all fittings by this factor

WRAS Approval Number  1003039

            

Print this entry

Range of BSP threaded fittings with polyamide bodies. For cold water use only. Maximum working pressures listed below.

Size:  

Model: ST15 - ST100 (Tees) ½”-2” (16 bar), 2½” (12 bar), 3”- 4” (10 bar) SE15 - SE100 (Female Elbows) ½”-2” (16 bar), 2½” (12 bar) 3”- 4” (10 bar) SMFE15 - SMFE50 (Male Female Elbow) ½” - 2” (16 bar) SP06 - SP100 (Screwed Plug) 1/8”-2” (16 bar), 2½” (12 bar), 3” - 4” (10 bar). SRB1506 - SRB10080 (Reducing Bush) ½” x 1/8” - 2” x 1½” (16 bar). SHN06 - SHN100 (Hex Nipples) 1/8” - 2” (16 bar), 2½” (12 bar), 3” - 4” (10 bar). SRHN0806 - SRHN10080 (Reducing Hex Nipples) ¼” x 1/8” - 2½” x 1½” (16 bar), 2½” x 1¼” (12 bar), 3” x 1½” - 4” x 3” (10 bar) 4” x 3”. SS15 - SS100 (Sockets) ½” - 2” (16 bar), 2½” (12 bar), 3” - 4” (10 bar) SC15 - SC100 (Caps) ½” - 2” (16 bar), 2½” (12 bar), 3” - 4” (10 bar) SRS2015 - SRS10080 (Reducing Sockets) ¾” x ½” - 3” x 2” (16 bar), 3” x 2½” (12 bar), 4” x 2½” - 4” x 3” (10 bar). SMHT06 - SMHT50 (Male Hose Tails) 1/8” - 2” (16 bar). SRMHT0806 - SRMHT1008 (Reducing Male Hose Tail) ¼” x 1/8” - 3/8” x ¼” (16 bar).

Marking: Hansen and either size or model number moulded onto bodies.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Hansen Products (NZ) Limited

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1012036

            

Print this entry

Range of universal couplings with polypropylene bodies and nitrile seals for use with PE, copper, lead, galvanised steel and PVC pipe. For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Size: 15 - 22mm – copper Galv, PE, PVC, lead.21 – 27mm – copper, PVC, lead, PE, Galv steel.27 – 35mm Galv, PVC.

Model: Plast universal kit – T Plast & RE Plast.

Marking: Size, plast and product information on compression nut.Size on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Sociedad De Transformacion De Plasticos SA

List all fittings by this manufacturer

Factor: Hydrodif Products Ltd

List all fittings by this factor

WRAS Approval Number  1102071

            

Print this entry

Range of brass pressfittings for use with copper pipe. The fittings incorporate an EPDM `O` ring and are assembled using a press tool which clamps the joints together. Maximum working pressure 16.0 bar & maximum operating temperature 30°C. Maximum working pressure 6.0 bar & maximum operating temperature 99°C.

Size: 64mm, 67mm, 76.1mm & 108mm.

Model: >B< PressP4041 06400000, P4090 06400000, P4270 06400000, P4130 06464064, P4041 06700000, P4041 07600000, P4041 10800000, P4090 06700000, P4090 07600000, P4090 10800000, P4040 06700000, P4040 07600000,P4092 06700000, P4092 07600000, P4092 10800000, P4270 06700000, P4270 07600000, P4270 10800000, P4301 06700000, P4301 07600000, P4301 10800000, P4130 06767067, P4130 07676076, P4130 108108108,P4243 06728000, P4243 06735000, P4243 06742000, P4243 06754000, P4243 07635000, P4243 07642000, P4243 07654000, P4243 07667000, P4243 10854000, P4243 10867000, P4243 10876000, P4130 06735067,P4103 06742067, P4130 06754067, P4130 07628076, P4130 07635076, P4130 07642076, P4130 07654076, P4130 07667076, P4130 10854108, P4130 10876108, P4275 06700000, P4275 07600000, P4275 10800000.

Marking: >B< and size on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: IBP Instalfittings spZOO

List all fittings by this manufacturer

Factor: Conex Universal Ltd

List all fittings by this factor

WRAS Approval Number  1011010

            

Print this entry

Range of pushfit fittings with copper bodies for use with copper pipe. Above ground use only. Maximum working pressure 16 bar at 85°C.

Size: 15mm and 22mm pushfit.

Model: Cuprofit

Marking: >B< and size on body of fitting.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: IBP Instalfittings sp ZOO

List all fittings by this manufacturer

Factor: Conex Universal Ltd

List all fittings by this factor

WRAS Approval Number  1112072

            

Print this entry

Range of copper press fittings with EPDM `O` rings for use with copper pipe (CW024A). For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Size:  

Model: Straight Coupling press x press C6270: 12 x 12 - 108 x 108. Sleeve Coupling press x press B8275: 15 x 15 - 54 x 54. Bend 90° press x press C6002: 12 x 12 - 108 x 108. Bend 90° Ø x press C6001: Ø12 x 12 - 108 x 108. Bend 45° press x press C6041: 12 x 12 - 108 x 108. Bend 45° Ø x press C6040: 2 x 12 - 108 x 108. By-pass bend Ø x Ø C6036: 15 x Ø15 - 22 x Ø22. Bend 90° Ø x Ø C6025: 15 x Ø15 - 22 x Ø22. Endcap press B8301: 15 - 54. Straight coupling reduction press x B8240: 22 x 15 - 35 x 28. T - coupling 3 x press / T C6130: 12 x 12 x 12 - 108 x 108 x 108. T - coupling reduction 3 x press C6131: 15 x 12 x 15 - 108 x 88.9 x 108.T - coupling reduction 3 x press C6131: 22 x 15 x 15 - 15 x 22 x 15. Straight coupling reduction C6243: Ø15 x 12 - Ø108 x 88.9.

Marking: GPC, size and product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Instalpress Hungary

List all fittings by this manufacturer

Factor: Instalpress Europe SL

List all fittings by this factor

WRAS Approval Number  1210087

            

Print this entry

Range of FP pushfit fittings manufactured from polyacetal copolymer. For use with PE-x (Kitemarked to BS 7291-3:201), PB (Kitemarked to BS 7291-2:2010) and copper pipe. For above ground use only. Maximum working pressure & operating temperature: 12.0 bar@20°C & 6.0 bar @ 83°C.

Size: 10mm, 12mm, 15mm, 18mm, 22mm.

Model: Straight connectors: FP110 (10mm), FP115 (15mm) & FP122 (22mm). Reducers: FP111510 (15mmx10mm) & FP112215 (22mmx15mm). Equal elbows: FP210 (10mm), FP215 (15mm) & FP222 (22mm). Reducing straight couplers: FP31510 (15mmx10mm) & FP32215 (22mmx15mm). Equal tees: FP510 (10mm), FP515 (15mm) & FP522 (22mm). Flexi hose connectors: FPFH1510, FPFH1513 & FPFH2213. Reducing tees: FP6151010 (15mmx10mmx10mm), FP615110 (15mmx15mmx10mm), FP6151522 (15mmx15mmx22mm), FP6221515 (22mmx15mmx15mm), FP6222210 (22mmx22mmx10mm) & FP622215 (22mmx22mmx15mm). Stem elbows: FP710 (10mm) & FP715 (15mm). Stop ends: FP810 (10mm), FP815 (15mm) & FP822 (22mm). Straight tap connectors: FP1015 (15mm x ½”), FP101522 (15mm x ¾”), FP102222 (22mm x ¾”). Bent tap connectors: FP915 (15mm x ½”).

Marking: `AV` and size moulded into collet and shoulder of fittings.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

List all fittings by this manufacturer

Factor: Plastic Fittings Technology Ltd.

List all fittings by this factor

WRAS Approval Number  0912055

            

Print this entry

`John Guest` plastic back plate connectors with a white Kematal body, EPDM `O` rings and seals. For use with PEX and Copper pipe. Maximum working pressure 12.5 bar.

Size: 15mm pushfit x ½" BSP.

Model: 15PWB.

Marking: John Guest logo, 15mm 65°C moulded into body.4S, JG and size moulded into collet.

Installation Requirements : R001           

Note: To be installed where light is excluded.

Proviso:  

Manufacturer: John Guest Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  0912056

            

Print this entry

Range of `John Guest` bulkhead adaptors with white Kematal bodies, EPDM `O` rings and seals. Maximum working pressure 12.5 bar.

Size: 15mm pushfit x ½" BSP, 15mm pushfit x ¾" BSP.

Model: NC2487, NC2540.

Marking: BSP, John Guest logo moulded into body.JG, size, 51 moulded into collet.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: John Guest Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1103025

            

Print this entry

Lead compression to BSP DZR Brass adaptor with a NBR O-ring and copper cone. For above and below ground use. Maximum working pressure 8 bar & maximum operating temperature 99°C.

Size: ½” x 7lb x ¾” FI.

Model: Leadline LL12734FIPDZR.

Marking: MWM, ½” and CR on compression nut.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Changzhou Huanghe Int Trade Co Ltd

List all fittings by this manufacturer

Factor: MWM Distributors Ltd

List all fittings by this factor

WRAS Approval Number  1106040

            

Print this entry

Range of pushfit fittings (brass and copper). The fittings comprise of stainless steel grip rings and EPDM `O` rings. Sizes 10, 15, 22 & 28mm push fit are for use with Copper, Polybutylene or cross linked Polyethylene pipe. Maximum working pressure 6.0 bar @ 20°C & 3.0 bar @ 92°C. Sizes 35, 42 & 54mm push fit are for use with copper pipe only. Maximum working pressure and operating temperature: 20.0 bar @ 24°C, 20.0 bar @ 30°C, 16.0 bar @ 65°C & 10.0 bar @ 99°C.

Size: 10, 15, 22 & 28mm push fit. 35, 42 & 54mm push fit.

Model: Tectite Sprint.

Marking: YF Logo and size on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1111091

            

Print this entry

`LBP Range` of press-fit fittings with copper bodies and EPDM `O` rings for use with copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Size: 15mm - 108mm.

Model: Straight coupling (S1/7270) - 15mm - 108mm; Straight coupling slip pattern (S1/7270S) - 15mm - 108mm; Straight reducing coupling (S1R/7240) - 15mm - 108mm; Reducer (S6/7243) - 15mm - 54mm; Elbow (S12/7002A) - 15mm - 108mm; Street elbow (S12S/7001A) - 15mm - 108mm; Straight female connector (S2/6270G) - 15mm - 64mm; Straight male connector (S3/6243G) - 15mm - 108mm; Female adaptor (S7/6246G) - 15mm - 54mm; Male Adaptor (S8/6280G) - 15mm - 42mm; Union coupling (S11/6330) - 15mm - 54mm; Male elbow (S13/6092G) - 15mm - 54mm; Female elbow (S14/6090G) - 15mm - 54mm; Backplate elbow (S15/6472G) - 15mm - 22mm; Composite female metric flange (S1FMF/7510) - 67mm - 108mm & Composite female metric flange (S1FMM/7520) - 67mm - 108mm. Models added January 2013: Reducing Elbow (S12R/7002A) - 22mm x 15mm.

Marking: `RYW` and size on fitting body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1106044

            

Print this entry

Range of BSP to push-fit end connectors with brass bodies and EPDM `O` rings for use with stainless steel pipe. Maximum working pressure 20.0 bar @ 23°C, 6 bar @ 95°C.

Size: 15, 18, 22, 28, 35, 42 and 54mm push-fit.

Model: Push-fit adapters - PT range

Marking: Pegler Yorkshire, Tectite and size on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  0910042

            

Print this entry

`ISIFLO sprint` range of pushfit fittings with Nylon and Acetal bodies and EPDM `O` rings for use with PE80 and PE100 pipe for above and below ground use. Suitable for cold water use only. Maximum working pressure 16.0 bar.

Size: PE80 - 20mm, 25mm, 32mm, 40mm, 50mm & 63mm. PE100 - 20mm, 25mm, 63mm.

Model: ISIFLO Sprint : Type 100, Type 110, Type 112, Type 115, Type 116, Type 120, Type 121, Type 125.

Marking: ISIFLO moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Raufoss Water & Gas AS

List all fittings by this manufacturer

Factor: Pegler Yorkshire Ltd

List all fittings by this factor

WRAS Approval Number  0910034

            

Print this entry

Range of `Plassim` compression fittings with polypropylene bodies and NBR seals. For use above and below ground, and cold water only. Maximum working pressure 16.0 bar.

Size: 16mm, 20mm & 25mm.

Model: 15016M0016, 15020M0020, 15025M0025, 15020D0016, 15025D0016, 15025D0020, 15032D0020, 15032D0025, 15040D0025, 15050D0025, 15016M0101, 15016M0102, 15020M0101, 15020M0102, 15020M0103, 15025M0101, 15025M0102, 15025M0103, 15016M0201, 15016M0202, 15020M0201, 15020M0202, 15025M0202, 15025M0203, 15016Z0016, 15020Z0020, 15025Z0025, 15016Z0101, 15016Z0102, 15020Z0101, 15020Z0102, 15025Z0101, 15025Z0102, 15025Z0103, 15016Z0201, 15016Z0202, 15020Z0201, 15020Z0202, 15025Z0202, 15025Z0203, 15016T0016, 15020T0020, 15025T0025, 15040T0040, 15050T0050, 15063T0063, 15020T0016, 15025T0020, 15016T0101, 15016T0102, 15020T0101, 15020T0102, 15025T0101, 15025T0102, 15025T0103, 15016T0201, 15016T0202, 15020T0201, 15020T0202, 15025T0201, 15025T0202, 15025T0203, 15020K0020, 15025K0025, 15020S0102, 15020S0120, 15025S0120.

Marking: Plassim, size and product information moulded onto body. Plassim, size, PPB moulded onto compression nut.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Plassim Fittings Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  0909028

            

Print this entry

Range of tapping tees with Gunmetal strap, stainless steel cutter, Gunmetal stems and EPDM `O` rings, for use with Puriton pipe Maximum working pressure 12.5 bar. Cold Water use only.

Size: 25mm x 110mm, 25mm x 90mm and 25mm x 63mm.

Model: 63PU13, 90PU13 and 110PU13.

Marking: 63mm x 25 & 90mm x 25 Size and product information cast onto body.Puriton, DR and product information stamped into fitting.Puriton, Uponor printed on adhesive label on body.110mm x 25Size and product information cast into body.Puriton, DR and product information stamped into fitting.Puriton, Uponor printed on adhesive label on body.

Installation Requirements : R001           

Note: Because there are no accepted tests, WRAS approval of tapping tees with barrier pipe does not include an assessment of its ability to prevent migration of contaminants from the surrounding soil.

Proviso:  

Manufacturer: Radius Systems Ltd.

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1111081

            

Print this entry

`SNC` range of ductile iron pipes and fittings. Available internally coated with epoxy only, cement only or epoxy coated cement. For above and below ground use. Cold water use only. Maximum working pressure 16.0 bar.

Size: DN80 - DN900.

Model: `SNC` range of pipe and fittings.

Marking: Company logo and product information on fittings.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Shin Nan Casting Factory Co Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1003075

            

Print this entry

Straub-Metal-Grip range of stainless steel, one-piece, pull-out resistant pipe couplings having EPDM sealing sleeves and stainless steel strip inserts. Used for connecting carbon steel, stainless steel, ductile iron (26.9mm to 609.6mm) and copper pipes (26.9mm to 42.4mm). Maximum nominal pressure rating : stainless steel, ductile iron, carbon steel and copper; 30.0mm to 219.1mm OD 16 bar, 244.5mm to 609.6mm OD 14 bar to 4 bar, according to the manufacturer`s technical data sheets. For use up to 60°C

Size: 30.0mm to 609.6mm pipe OD.

Model: Straub-Metal-Grip.

Marking: Straub, Straub logo, model, size and product information printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Straub Werke AG

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1003076

            

Print this entry

Straub-Plast-Grip range of stainless steel, one-piece, pull-out resistant pipe couplings having EPDM sealing sleeves and stainless steel strip inserts. Used for connecting PE plastic pipes. Maximum nominal pressure rating : PE ; 40.0mm to 160.0mm OD 16 bar. For use up to 60°C.

Size: 40.0mm to 160.0mm pipe OD

Model: Straub-Plast-Grip.

Marking: Straub, Straub logo, model, size and product information printed on adhesive label on body. Straub, model and product information stamped into body.

Installation Requirements : R001           

Note: An internal stiffening ring (two per joint) is required with this coupling type, as supplied by the manufacturer.

Proviso:  

Manufacturer: Straub Werke AG

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1003077

            

Print this entry

Straub-Combi-Grip range of stainless steel, one-piece, pull-out resistant pipe couplings having EPDM sealing sleeves and stainless steel strip inserts. Used for connecting PE plastic and metal pipes. Maximum nominal pressure rating : Steel to PE ; 40.0mm to 160.0mm OD 16 bar. For use up to 60°C.

Size: 40.0mm to 160.0mm pipe OD.

Model: Straub-Combi-Grip.

Marking: Straub, Straub logo, model, size and product information printed on adhesive label on body. Straub, model and product information stamped into body.

Installation Requirements : R001           

Note: An internal stiffening ring is required with this coupling type for use with the MDPE pipe, as supplied by the manufacturer.

Proviso:  

Manufacturer: Straub Werke AG

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1003078

            

Print this entry

Straub-Flex range of stainless steel or hot galvanized carbon steel, one-piece casings, axially non restraint pipe couplings having EPDM sealing sleeves. Used for connecting carbon steel, stainless steel, ductile iron and PE plastic pipes. Maximum nominal pressure rating : carbon steel, stainless steel, ductile iron and PE plastic pipes ; [Type 1L] 48.3mm to 168.3mm OD 16 bar, [Type 2] 180.0mm to 1219.2mm OD 12 bar to 7 bar, [Type 3] 558.8mm to 1016mm OD 7 bar to 10.5 bar, according to model type and manufacturer`s technical data sheets. For use up to 60°C.

Size: 48.3mm to 1219.2mm pipe OD.

Model: Straub-Flex 1L, 2L, 2LS, 2LU, 2H, 2XS & 3LS, H, X

Marking: Straub, Straub logo, model, size and product information printed on adhesive label on body. Straub, model and product information stamped into body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Straub Werke AG

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1003079

            

Print this entry

Straub-Open-Flex range of stainless steel or hot galvanized carbon steel, one-piece casings, axially non restraint pipe couplings having EPDM sealing sleeves. Used for connecting carbon steel, stainless steel, ductile iron and PE plastic pipes. Maximum nominal pressure rating: carbon steel, stainless steel, ductile iron and PE plastic pipes ; [Type 1L] 48.3mm to 168.3mm OD 16 bar, [Type 2] 180.0mm to 821.0mm OD 12 bar to 11 bar, [Type 3] 558.8mm to 1219.2mm OD 7 bar to 3.5 bar, according to model type and manufacturer`s technical data sheets. For use up to 60°C.

Size: 48.3mm to 1219.2mm pipe OD

Model: Straub-Open-Flex 1L, 2L, 2LS, 2LU, 2H & 3LS, 3H

Marking: Straub, Straub logo, model, size and product information printed on adhesive label on body.

Installation Requirements : R001           

Note: Intended for use with existing pipes in situ, without the need to remove or re-lay the pipes.

Proviso:  

Manufacturer: Straub Werke AG

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1003074

            

Print this entry

Straub-Grip-L range of stainless steel, one-piece, axial resistant pipe couplings having EPDM sealing sleeves and stainless steel strip inserts. Used for connecting carbon steel, stainless steel, ductile iron (26.9mm to 609.6mm) and copper pipes (26.9mm to 42.4mm). Maximum nominal pressure rating : carbon steel, stainless steel, ductile iron and copper; 26.9mm to 141.3mm OD 16 bar, 154.0mm to 609.6mm OD 13 bar to 1 bar, according to the manufacturer`s technical data sheets. For use up to 60°C

Size: 26.9mm to 609.6mm pipe OD.

Model: Straub-Grip-L.

Marking: Straub, Straub logo, model, size and product information printed on adhesive label on body. Straub and product information stamped into body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Straub Werke AG

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1105048

            

Print this entry

SK-I Range of stainless steel push fit and push fit to BSP fittings with silicone O-rings for use with stainless steel tube. For above ground use only. Maximum working pressure 25 bar & maximum operating temperature 85°C.

Size: 90° Elbow SKIPIF90E - 15, 22, 28, 35, 42 & 54 pushfit. 45° Elbow SKIPIF45E - 15, 22, 28, 35, 42 & 54 pushfit. Equal Tee SKIPIFET - 15, 22, 28, 35, 42 & 54 pushfit. Straight Coupling SKIPIFSC - 15, 22, 28, 35, 42 & 54 pushfit. Male Screw Thread Connector SKIPIFMSTC - 15mm pushfit x ½” male BSP, 22mm pushfit x ¾” male BSP, 28mm pushfit x 1” male BSP, 35mm pushfit x 1 ¼” male BSP, 42mm pushfit x 1½” male BSP & 54mm pushfit x 2” male BSP. Plate Elbow SKIPIFPE - 15mm pushfit x ½” female BSP, 22mm pushfit x ½” female BSP, 22mm pushfit x ¾” female BSP, 28mm pushfit x ½” female BSP, 28mm pushfit x ¾” female BSP & 28mm pushfit x 1” female BSP. Female screw thread connector SKIPIFFSTC - 15mm pushfit x ½” female BSP, 22mm pushfit x ¾” female BSP, 28mm pushfit x 1” female BSP, 35mm pushfit x 1 ¼” female BSP, 42mm pushfit x 1½” female BSP & 54mm pushfit x 2” female BSP. Plate Tee SKIPIFPT - 15mm pushfit x ½” female BSP, 22mm pushfit x ½” female BSP, 22mm pushfit x ¾” female BSP, 28mm pushfit x ½” female BSP, 28mm pushfit x ¾” female BSP & 28mm pushfit x 1” female BSP. Reducer SKIPIFR - 15, 22, 28, 35, 42 & 54 pushfit. Unequal Tee SKIPIFUT - 15, 22, 28, 35, 42 & 54 pushfit. End Cap SKIPIFEC - 15, 22, 28, 35, 42 & 54 pushfit.

Model:  

Marking:  SK-I, size and steel grade on body of fitting.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Topbuild Investments Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1109043

            

Print this entry

‘705’ range of cast iron couplings incorporating EPDM gaskets. For use with carbon steel or stainless steel pipe which are grooved according to Tyco specifications. Above and below ground use. Cold water use only. Maximum working pressure 16.0 bar.

Size: 1” – 8”

Model: 705MD0034 - 1”705MD0042 - 1 ¼“705MD0048 - 1 ½“705MD0060 - 2”705MD0073 – 2 ½”705MD0076 - 2 ½“705MD0089 – 3”705MD0108 - 4“705MD0114 - 4”705MD0133 - 5”705MD0141 - 5”705MD0159 - 6”705MD0165 - 6”705MD0168 – 6”705MD0219 - 8”

Marking: Grinnel, size and product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Tyco Flow Control (M) Bhd

List all fittings by this manufacturer

Factor: Tyco Fire Suppression & Building Products

List all fittings by this factor

WRAS Approval Number  1109040

            

Print this entry

`772` range of cast iron couplings incorporating EPDM gaskets. For use with carbon steel or stainless steel pipes which are grooved according to Tyco specifications. Above and below ground use. Cold water use only. Maximum working pressure 16.0 bar.

Size: 1¼” – 12”.

Model: 772MD0042 – 1¼”772MD0048 – 1½”772MD0060 – 2”772MD0073 – 2½”772MD0076 – 2½”772MD0089 – 3”772MD0114 – 4”772MD0139 – 5”772MD0141 – 5”772MD0165 – 6”772MD0168 – 6”772MD0219 – 8”772MD0273 – 10”772MD0324 – 12”

Marking: Grinnel, size and product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Tyco Flow Control (M) Bhd

List all fittings by this manufacturer

Factor: Tyco Fire Suppression & Building Products

List all fittings by this factor

WRAS Approval Number  1109042

            

Print this entry

`405` range of stainless steel couplings incorporating EPDM gaskets. For use with carbon steel or stainless steel pipe which are grooved according to Tyco specifications. Above and below ground use. Cold water use only. Maximum working pressure 16.0 bar.

Size: 1¼” – 8”

Model: 405MD00424 – 1¼”405MD00484 – 1½”405MD00604 – 2”405MD00734 – 2½”405MD00764 – 2½”405MD00894 – 3”405MD01144 – 4”405MD01394 – 5”405MD01414 – 5”405MD01684 – 6”405MD02194 – 8”

Marking: Grinnel, size and product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Tyco Flow Control (M) Bhd

List all fittings by this manufacturer

Factor: Tyco Fire Suppression & Building Products

List all fittings by this factor

WRAS Approval Number  1109041

            

Print this entry

`577’ range of cast iron couplings incorporating EPDM gaskets. For use with carbon steel or stainless steel pipe which are grooved according to Tyco specifications. Above and below ground use. Cold water use only. Maximum working pressure 16.0 bar.

Size: 1” - 8”

Model: 577MD0034 - 1”; 577MD0042 - 1¼”; 577MD0048 - 1½”; 577MD0060 - 2”; 577MD0073 - 2½”; 577MD0076 - 2½”; 577MD0089 - 3”; 577MD0114 - 4”; 577MD0141 - 5”; 577MD0165 - 6”; 577MD0168 - 6”; & 577MD0219 - 8”.

Marking: Grinnel, size and product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Tyco Flow Control (M) Bhd

List all fittings by this manufacturer

Factor: Tyco Fire Suppression & Building Products

List all fittings by this factor

WRAS Approval Number  1106041

            

Print this entry

Unidelta range of compression fittings for use with polyethylene PE80 & PE100 pipe with polypropylene bodies, nitrile `O` rings and plastic pipe liners. Maximum working pressure 16.0 bar. Cold water use only. For above and below ground use.

Size: Straight coupler (1001) - 20mm, 25mm, 32mm, 40mm, 50mm, 63mm. Reducing coupler (1002) - 25x20mm, 32x20mm, 32x25mm, 40x25mm, 50x25mm, 50x32mm, 50x40mm, 63x25mm, 63x32mm, 63x40mm, 63x50mm. Male adaptor (1003) - 20x½”, 20x¾”, 20x1”, 25x1/2”, 25x¾”, 25x1”, 32x½”, 32x¾”, 32x1”, 32x1”¼, 40x1”, 40x1”¼, 40x1½”, 40x2”, 50x1”, 50x1¼”, 50x1½”, 50x2”, 63x1¼”, 63x1½”, 63x2”, 63x2½”. Female adaptor (1004) - 20x½”, 20x¾”, 20x1”, 25x½”, 25x¾”, 25x1”, 32x½”, 32x¾”, 32x1”, 32x1”¼, 40x1”, 40x1”¼,40x1”½, 50x1”¼, 50x1”½, 50x2”, 63x1¼”, 63x1½”, 63x2”, 63x2½”. Equal Tee 90° (1005) - 20mm, 25mm, 32mm, 40mm,50mm, 63mm. Elbow 90° (1006) - 20mm, 25mm, 32mm, 40mm, 50mm, 63mm. Tee with female take Off (1007) - 20x½”x20, 20x¾x20, 25x½”x25, 25x¾”x25, 25x1”x32, 32x1/2”x32, 32x¾”x32, 32x1”x32, 32x1”¼x32, 40x1”x40, 40x11/4”x40, 40x11/2”x40, 50x½”x50, 50x1”¼x50, 50x1”½x50, 50x2”x50, 63x1”¼ x 63, 63x1”½x63, 63x2”x63, 63x2”½x63. 90° elbow with male take off (1008) - 20x½”, 20x¾”, 25x½”, 25x¾”, 25x1”, 32x½”, 32x¾”, 32x1”, 32x1”¼, 40x1”, 40x1¼”, 40x1½”, 50x1¼”, 50x1½”, 50x2”, 63x1½”, 63x2”, 63x2½”. 90° elbow with female take off (1009) - 20x½”, 20x¾”, 25x½”, 25x¾”, 25x1”, 32x½”, 32x¾”, 32x1”, 32x1”¼, 40x¾”, 40x1”, 40x1 ¼”, 40x1”½, 50x1”¼, 50x1”½, 50x2”, 63x1”½, 63x2”, 63x2”½. 90° Tee with male take off (1010) - 20x½x20”, 20x¾x20”, 25x½”x25, 25x¾x25”, 25x1”x25, 32x½”x32, 32x¾”x32, 32x1”x32, 32x1”¼x32, 40x¾x40”, 40x1”x40, 40x1”½x40, 50x1”¼x50, 50x1”½x50, 50x2”x50, 63x1”½x63, 63x2”x63, 63x2”½x63. End plug (1012) - 20mm, 25mm, 32mm, 40mm, 50mm, 63mm. 90° Reducing tee (1013) - 25x20x25, 32x20x32, 32x25x32, 40x25x40, 40x32x40, 50x25x50, 50x32x50, 50x40x50, 63x25x63, 63x32x63, 63x40x63, 63x50x63. Repair slip coupler (1014) - 25mm, 32mm, 40mm, 50mm, 63mm. Female tee with peg fitting (1021) - 32x¾”x32. 90° elbow with lateral threaded take off (1023) - 25x25x½”, 32x32x½”, 32x32x¾”. 90° tee with increased take off (1029) - 20x25x20, 25x32x25, 32x40-32, 40x50x40. Wall Plate elbow (1034) - 20x½”, 25x¾”

Model:  

Marking: Unidelta and size on fitting body.Made in Italy, pressure rating, size and product information on compression nut.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Unidelta SpA

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1206031

            

Print this entry

Range of plastic pipe end connectors with push fit and female BSP connections. For above ground use only. Maximum working pressure 12.5 bar at 20°C and 7.0 bar 82°C.

Size: ½” BSP and ¾” BSP

Model: Hep2O Generation 4: HD26A/10, HD26A/15, HD26B/15, HD26B/22

Marking: Hep2O on body. Size & BS7291-2 on collet.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Wavin Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

Hit Counter