Section 1220

Print Entire Section

Fittings for use with Tube and Pipe

Flanged, un-flanged and repair clamps

WRAS Approval Number  1205056

Print this entry

Range of ductile iron pipe fittings with blue polyolefin alloy coating. Maximum working pressure 16.0 Bar. Cold water use only.

Size: 80mm to 440mm

Model: Flanged tee AFT5L5 50 x 50 AFT8L5 80 x 50AFT8L8 80 x 80AFT10L5 100 x 50AFT10L8 100 x 80AFT10L10 100 x 100AFT15L5 150 x 50AFT15L8 150 x 80AFT15L10 150 x 100AFT15L15 150 x 150AFT20L8 200 x 80AFT20L10 200 x 100AFT20L15 200 x 150AFT20L20 200 x 200AFT25L8 250 x 80AFT25L10 250 x 100AFT25L15 250 x 150AFT25L20 250 x 200AFT25L25 250 x 250AFT30LB 300 x 80AFT30L10 300 x 100AFT30L15 300 x 150AFT30L20 300 x 200AFT30L25 300 x 250AFT30L30 300 x 300Double flanged 90° short bendDF90SB5 50 x 50DF90SB8 80 x 80DF90SB10 100 x 100DF90SB15 150 x 150DF90SB20 200 x 200DF90SB25 250 x 250DF90 SB30 300 x 300Double flanged 45° bend DF45B8 80 x 80DF45B10 100 x 100DF45B15 150 x 150DF45B20 200 x 200DF45B25 250 x 250DF45B30 300 x 300Double flanged 22.5° bendDF22.5B8 80 x 80DF22.5B10 100 x 100DF22.5B15 150 x 150DF22.5B20 200 x 200DF22.5B25 250 x 250DF22.5B30 300 x 300Double flanged 11.25° bendDF11.25B8 80 x 80DF11.25B10 100 x 100DF11.25B15 150 x 150DF11.25B20 200 x 200DF11.25B25 250 x 250DF11.25B30 300 x 300Flanged belmouthsBM8 80 x 80BM10 100 x 100BM15 150 x 150BM20 200 x 200BM25 250 x 250BM30 300 x 300Double flanged concentric taperDFCT8L5 80 x 50DFCT10L5 100 x 50DFCT10L8 100 x 80DFCT15L8 150 x 80DFCT15L10 150 x 100DFCT20L8 200 x 80DFCT20L10 200 x 100DFCT20L15 200 x 150DFCT25L10 250 x 100DFCT25L15 250 x 150DFCT25L20 250 x 200DFCT30L15 300 x 150DFCT30L20 300 x 200DFCT30L25 300 x 250Double flanged flat taperDFFT8L5 80 x 50DFFT10L5 100 x 50DFFT10L8 100 x 80DFFT15L8 150 x 80DFFT15L10 150 x 100DFFT20L10 200 x 100DFFT20L15 200 x 150DFFT25L15 250 x 150DFFT25L20 250 x 200DFFT30L15 300 x 150DFFT30L20 300 x 200DFFT30L25 300 x 250All flanged radial teeAFRT8 80 x 80AFRT10 100 x 100AFRT15 150 x 150AFRT20 200 x 200AFRT25 250 x 250AFRT30 300 x 300Double flanged 90° duckfootDFDF8 80 x 80DFDF10 100 x 100DFDF15 150 x 150DFDF20 200 x 200DFDF25 250 x 250DFDF30 300 x 300Double flanged 90° long radDFLR8 80 x 80DFLR10 100 x 100DFLR15 150 x 150DFLR20 200 x 200DFLR25 250 x 250DFLR30 300 x 300Blank flangesBF8 80mmBF10 100mmBF15 150mmBF20 200mmBF25 250mmBF30 300mmDouble flanged pipesR8L15 80 x 150R8L20 80 x 200R8L25 80 x 250R8L30 80 x 300Double flanged pipesR10L15 100 x 150R10L20 100 x 200R10L25 100 x 250R10L30 100 x 300R15L15 150 x 150R15L20 150 x 200R15L25 150 x 250R15L30 150 x 300R20L20 200 x 200R20L25 200 x 250R20L30 200 x 300R25L25 250 x 250R25L30 250 x 300R30L20 300 x 200Flanged spigotsFS8L35 80 x 350FS10L36 100 x 360FS15L38 150 x 380FS20L40 200 x 400FS25L42 250 x 420FS30L44 300 x 440All flanged crossAFC8 80 x 80AFC10 100 x 100AFC15 150 x 150AFC20 200 x 200AFC25 250 x 250AFC30 300 x 300All flanged Y pipeAFY8 80 x 80AFY10 100 x 100AFY15 150 x 150AFY20 200 x 200AFY25 250 x 250AFY30 300 x 300Flanged 45 deg. Angle branch type NAF45AB10N 100 x 100AF45AB15N 150 x 150AF45AB20N 200 x 200AF45AB25N 250 x 250AF45AB30N 300 x 300

Marking: PN16, size, DI, EN545, DG, date of manufacture , product code cast onto bodies.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Ductile Group (DG) Ltd

Factor:  

WRAS Approval Number  1301063

Print this entry

Amex Vario seal for internal repair of pipes. The system incorporates two stainless steel compression rings, two stainless steel packing plates, an EPDM seal and an optional MDPE backing band. The seals interlock so a larger repair can be achieved. For above and below ground use. Maximum working pressure 15 bar. Cold water use only.

Size: DN 600: approval for an indeterminate length of pipe

Model: AMEX ®-10 VARIO

Marking: Amex 10 on seal

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Planned Maintenance (Pennine) Ltd

WRAS Approval Number  0904042

Print this entry

Series 202 multiple band repair clamps having an EPDM liner and for use with stainless steel, mildsteel, cast iron, ductile iron, concrete, asbestos cement, malleable iron and copper pipe. Maximum working pressure 3.0 - 10.0 bar depending on clamp size.

Size: 86mm to 965mm.

Model: Series 202 multiple repair clamps.

Marking: Company name, logo, contact details and technical information printed onto adhesive label. Product information cast onto/into clamps.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: AVK Manufacturing Ltd

Factor:  

WRAS Approval Number  0904043

Print this entry

Series 215 stainless steel tees having an EPDM liner and for use with stainless steel, mildsteel, cast iron, ductile iron, concrete, asbestos cement, malleable iron and copper pipe. Maximum working pressure 3.0 - 10.0 bar depending on clamp size.

Size: 86mm to 626mm.

Model: Series 215 stainless steel tees.

Marking: Company name, logo, contact detail and technical information printed onto adhesive label. Product information cast onto/into clamps.

Installation Requirements : R001           

Note:  

Proviso: Cold water use only.

Manufacturer: AVK Manufacturing Ltd

Factor:  

WRAS Approval Number  0904056

Print this entry

Series 206 single bond repair clamps having an EPDM liner and for use with stainless steel, mildsteel, cast iron, ductile iron, concrete, asbestos cement, malleable iron and copper pipe. Maximum working pressure 60mm to 290mm 10.0 bar, up to 350mm 9.0 bar. Cold water use only.

Size: 60 to 350mm.

Model: Series 206 single bond repair clamps.

Marking: Company name, logo, contact details and technical data printed onto adhesive label on body. Product information cast into/onto clamps.

Installation Requirements : R001           

Note:  

Proviso: Cold water use only.

Manufacturer: AVK Manufacturing Ltd

Factor:  

WRAS Approval Number  0812079

Print this entry

Range of repair clamps with ductile iron bodies (blue epoxy coated) and EPDM seals, for use with cast iron and mild steel pipe. Cold water only. Maximum working pressure 16.0 bar.

Size: 85.4 - 114.0mm (3") to 319.9 - 341.3mm (12").

Model: Series 253 Supacollar universal repair clamps.

Marking: Product information, size, pressure, AVK and model number cast onto body.

Installation Requirements : R001           

Note:  

Proviso: Cold water use only.

Manufacturer: AVK Manufacturing Ltd

Factor:  

WRAS Approval Number  1003072

Print this entry

`System 2000` range of mains fittings including couplings and flange adaptors with ductile iron bodies (blue epoxy powder coating) with EPDM lip seals and gaskets and acetal centre register rings. For above and below ground cold water use. Maximum working pressure 16.0 bar.

Size: DN40 - DN400.

Model: 0400, 0430, 8525, 8515, 8535, 8555, 8075, 5045.

Marking: Hawle, size and pressure rating cast onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: E. Hawle Armaturenwerke GmbH

Factor:  

WRAS Approval Number  1105051

Print this entry

Low profile mechanical seal for the internal repair of pipe joints. The system incorporates two stainless steel compression rings and an EPDM seal. For use above and below ground with cold water only. Maximum working pressure 22.5 bar.

Size: DN 600.

Model: Amex 10 seal

Marking: Amex 10 on seal.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Amex GmbH

Factor: Planned Maintenance (Pennine) Ltd