Section 1310

Print Entire Section

Glass/Bottle Washers

Machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the machine will determine any additional backflow protection that may be required.

Machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the machine will determine any additional backflow protection that may be required.

WRAS Approval Number  1301074

Print this entry

Range of floor standing glass washers with flow controlled by solenoid valves. The product is supplied with a non-verifiable double check valve assembly (suitable for protection against fluid category 3 risk) Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

Size: Stainless steel braided, EPDM lined flexible hose assembly with a ¾” BSP captive nut end connection.

Model: ECOMAXG402-12, ECOMAXG502-14, ECOMAX402-12 & ECOMAX502-14.

Marking: HOBART & ECOMAX on body. Address, model number and product info on data plate.

Installation Requirements : R001           

Note: These appliances are supplied with a fluid category 3 backflow prevention device.

Proviso: Discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.

Manufacturer: Hobart GmbH

Factor: Hobart UK

WRAS Approval Number  1205055

Print this entry

Range of glass washers with water fed via PVC flexible hose assemblies and controlled by a solenoid valve. Maximum working pressures 3.0 bar. Maximum operating temperature 90°C.

Size: PVC flexible hose assembly with ¾” BSP captive.

Model: MS 9451, MS 9453, MS 9500, MS 9501, MS 9503, MS 9100, MB 9235, MB 9510, MB 9240, MB 9920, MB 9530R, MB 9530, MB 9940, MB 930, MS 9351, MS 9353, MS 9400, MS 9401 & MS 9403. Additional Models added June 2012 MS 9800, MS 9801, MS 9803, ECO 50, ECO 90, ECO 35 & ECO 45.

Marking: Mach logo on front panel. Mach Spa, model number and product information on side panel.

Installation Requirements : R001 R120         

Note: These appliances are supplied with fluid category 3 backflow protection devices.

Proviso:  

Manufacturer: Mach Spa

Factor:  

WRAS Approval Number  1205104

Print this entry

Range of glass washers with water fed via PVC flexible hose assemblies and controlled by a solenoid valve. Maximum working pressures 3.0 bar. Maximum operating temperature 90°C.

Size: PVC flexible hose assembly with ¾” BSP captive nut.

Model: SW 350, SW 400 & SW 500.

Marking: SupaWash on front panel. Manufacturers name, model number and product information on side panel.

Installation Requirements : R001 R120         

Note: These appliances are supplied with fluid category 3 backflow protection devices.

Proviso:  

Manufacturer:  

Factor: Buzz Supplies Ltd

WRAS Approval Number  1206058

Print this entry

Range of hood style Glass washing machines. Water is supplied by a PVC flexible hose assembly controlled by a solenoid valve and discharges via a type `AA` airgap. The appliance also incorporates a non-verifiable double check valve assembly (suitable for backflow protection against Fluid Category 3 risk) Maximum working pressure 1.5 bar at 60°C or 10.0 bar at 25°C.

Size: PVC flexible hose assembly with ¾” BSP captive nut end connections.

Model: SC45 and SC50

Marking: Nelson logo, model and product information on back panel.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Nelson Dish and Glasswashing Machines Ltd.

Factor:  

WRAS Approval Number  1205106

Print this entry

Range of glass washers with water fed via PVC flexible hose assemblies and controlled by a solenoid valve. Maximum working pressures 3.0 bar. Maximum operating temperature 90°C.

Size: PVC flexible hose assembly with ¾” BSP captive nut.

Model: H 350 PLUS, H 400 PLUS, H 50013 PLUS, H 50030 PLUS & H 910 PLUS.

Marking: Hurricane & model number on front panel. Company name and address, WRAS, model number and product information on side panel.

Installation Requirements : R001 R120         

Note: These appliances are supplied with fluid category 3 backflow protection devices.

Proviso:  

Manufacturer:  

Factor: Buzz Supplies Ltd

WRAS Approval Number  0903326

Print this entry

Range of under counter glass washing machines having a solenoid valve (T&P) fitted to the cold water inlet which supplies water to the heater within the machine. Maximum supply pressure 4.0 bar

Size: ¾" BSP (F) Inlet connection.

Model: LB200 Glass Washing machine LB215 Glass Washing machine LB215/A Glass Washing machine.

Marking: Data plate on side of machine showing manufacturers name, model number and maximum and minimum operating pressures.

Installation Requirements : R001 R160         

Note: This appliance has no backflow prevention device built in.

Proviso:  

Manufacturer: Comenda

Factor: Dawson MMP Ltd

WRAS Approval Number  0903325

Print this entry

Range of under counter glass washing machines having a solenoid valve (T&P) fitted to the cold water inlet which supplies water to the heater within the machine. Maximum supply pressure 4.0 bar

Size: ¾" BSP (F) Inlet connection.

Model: BHC25 Glass Washing machine BHC25A Glass washing machine.

Marking: Data plate on side of machine showing manufacturers name, model number and maximum and minimum operating pressures.

Installation Requirements : R001 R160         

Note: This appliance has no backflow prevention device built in.

Proviso:  

Manufacturer: Comenda

Factor: Dawson MMP Ltd

WRAS Approval Number  0910324

Print this entry

Range of under counter glass washing machines having a solenoid valve (Elbi) fitted to the cold water inlet which supplies water to the heater within the machine. Maximum supply pressure 4 bar.

Size: ¾" BSP (F) Inlet connection.

Model: FC3, FC3EA, FC4 & FC4EA Glass Washing Machines.

Marking: Adhesive label on side of machine with Comenda`s name and address, model number and maximum and minimum operating pressures.

Installation Requirements : R001 R160         

Note: 1) There is no backflow protection incorporated in these appliances.2) Airgap to drain must be via a type AA or AB airgap or installed in accordance with the requirements of EN1717.

Proviso:  

Manufacturer: Comenda

Factor: Dawson MMP Ltd

WRAS Approval Number  1003336

Print this entry

Range of under counter glass washing machines having a solenoid valve (Invensys) fitted to the cold water inlet which supplies water to the heater within the machine. The appliance has a commercial salt regenerated water softener built in. Maximum supply pressure 5.0 bar.

Size: ¾” BSP (F) inlet

Model: Meiko ECO530 F-M EW10 Glasswasher

Marking: Front panel badged MEIKO, ECOSTAR 530F GW. Data label on front panel bottom right-hand side corner showing Manufacturers Meiko, manufacturers address, Type, Serial number, DVGW, Voltage, KW rating of boiler, Boiler contents and year of manufacture

Installation Requirements : R001           

Note: This appliance has a Fluid Category 3 backflow prevention device built in.

Proviso:  

Manufacturer: Meiko Maschinebau GmbH & Co KG

Factor: Meiko (UK) Ltd