Section 1650

Print Entire Section

Shower Outlets

WRAS Approval Number  1201049

Print this entry

Solex range of shower handsets and heads with chromium plated ABS bodies and NBR `O` rings. Model P19100 incorporate a stainless steel strainer and plastic flow restrictor on inlet. Maximum operating temperature 46°C.

Size:  

Model: Shower Heads P13700, P14704 & P19100 - ½” BSP female. Model added May 2013: P17901 - ½” BSP female. Shower Handsets P51200, P51700, P52503, P59201 & P65700 - ½” BSP male.

Marking: WRAS CL on inlet connection or body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Xiamen Solex High-Tech Industries Co. Ltd

Factor:  

WRAS Approval Number  1203023

Print this entry

Hand shower set consisting of a chromium plated plastic shower head, a chromium plated brass wall mounted elbow and a stainless braided EPDM lined flexible hose with both shower head and elbow incorporating a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Supplied with stainless steel strainer. Maximum operating temperature 60°C.

Size: ½” BSP male inlet.

Model: Handshower set – 27.802.892.

Marking: ‘Dornbracht’ on shower outlet.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Aloys F Dornbracht GmbH & Co KG

Factor:  

WRAS Approval Number  1112316

Print this entry

Shower outlet with chromium plated brass body and EPDM `O` rings. The shower outlet incorporates 3 spray outlets. Maximum operating temperature 70°C

Size: Manifold connection

Model: Raindance Rainfall 28 411 xxx

Marking: Hansgrohe on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1112317

Print this entry

Range of shower handsets with a plastic body (chromium plated) and flow adjuster built into the outlet discharge. The products incorporate flow restrictors on the inlet. Maximum operating temperature 70°C.

Size: ½” BSP (M)

Model: 28 587 xxx Hansgrohe Raindance Select 150 hand shower & 28 588 xxx Hansgrohe Raindance Select 150 hand shower EcoSmart.

Marking: Hansgrohe on body

Installation Requirements : R000           

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1303059

Print this entry

Shower outlet with chromium plated brass body and EPDM `O` rings. The shower outlet incorporates an ABS spray ring set. Maximum operating temperature 85°C.

Size: 15mm compression.

Model: SF1253CP.

Marking: `UC` and date of manufacture (MM/YY) on body.

Installation Requirements : R001 R040         

Note: Open outlet use only.

Proviso:  

Manufacturer:  

Factor: Twyford Bathrooms

WRAS Approval Number  1112327

Print this entry

Range of shower handsets with chromium plated ABS bodies & NBR `O` rings incorporating a three stage manually operated spray setting. Maximum operating temperature 60°C.

Size: ½” BSP (M)

Model: 56183 – 1001 & 56183 - 2001

Marking: Lota on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1112045

Print this entry

Wall mounted shower rail (chromium plated brass) incorporating a manually operated diverter and shower hose. Maximum operating temperature 65°C

Size: ½” BSP captive nut inlet.

Model: ‘Clease’ C00040.

Marking: WRAS-CL on body

Installation Requirements : R001           

Note: This approval does not include shower head and handset.

Proviso:  

Manufacturer: Xiamen Clease Industries Co. Ltd

Factor:  

WRAS Approval Number  1112305

Print this entry

Shower handset with chromium plated ABS bodies and NBR `O` rings. The product incorporates flow restrictors on the inlet. Maximum operating temperature 50°C.

Size: ½” BSP (M)

Model: Jetstorm

Marking: ‘E’ on centre of handset

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Ecocamel Ltd.

Factor:  

WRAS Approval Number  1201046

Print this entry

Pulse Eco range of shower handsets with white or chromium plated ABS bodies and NBR `O` rings incorporating adjustable spray setting. Maximum operating temperature 65°C.

Size: ½” BSP male inlet.

Model: PES00021 – white.PES00022 – chrome.

Marking: `Pulse Eco Shower` on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Pulse Eco Shower

Factor:  

WRAS Approval Number  1303023

Print this entry

`Sporting` range of shower panels with brass shower heads and NBR `O` rings. The units are operated via a push button. The inlet incorporates a single check valve (suitable for backflow protection against fluid category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Size: ½” BSP male inlet

Model: Sporting 714700: Shower Panel satin chrome finish. Sporting 714701: Shower Panel white epoxy finish. Sporting 714700GR: Shower Panel with spray grid and satin chrome finish. Sporting 714701GR: Shower Panel with spray grid and white epoxy finish.

Marking: 'Delabie' on push button

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Delabie SCS

Factor: Douglas Delabie

WRAS Approval Number  1201055

Print this entry

Aqualisa range of adjustable spray setting shower handsets with chromium plated or white acetal bodies and EPDM seals. Maximum operating temperature 65°C.

Size: ½” BSP male inlets

Model: 628001 Basic Universal handset (chrome), 628002 Basic Universal handset (white) & 628101 Superior Universal handset (chrome).

Marking: Aqualisa on shower handset body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Jing Mei Industrial

Factor: Aqualisa Products Ltd.

WRAS Approval Number  1201056

Print this entry

Aqualisa range of adjustable spray setting shower handsets with chromium plated or white acetal bodies and EPDM seals. Maximum operating temperature 65°C.

Size: ½” BSP male inlets.

Model: 628401 chromium plated electrics handset (chrome) & 628402 white electrics handset (white).

Marking: Aqualisa logo on shower handset body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Jing Mei Industrial

Factor: Aqualisa Products Ltd.

WRAS Approval Number  1201057

Print this entry

Aqualisa shower head with chromium plated ABS body, EPDM seals and adjustable spray settings. Maximum operating temperature 65°C.

Size: ½” BSP female inlets.

Model: 628601.

Marking: Aqualisa on inlet connection.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Jing Mei Industrial

Factor: Aqualisa Products Ltd.

WRAS Approval Number  1201058

Print this entry

Aqualisa range of shower heads with chromium plated acetal bodies, EPDM seals and adjustable spray settings. Maximum operating temperature 65°C.

Size: ½” BSP male inlet.

Model: 628501 Basic Universal handset & 628701 Superior Universal handset .

Marking: Aqualisa on inlet connection.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Jing Mei Industrial

Factor: Aqualisa Products Ltd.

WRAS Approval Number  1201059

Print this entry

Aqualisa range of adjustable shower heads with chromium plated acetal bodies, EPDM seals and adjustable spray settings. Maximum operating temperature 65°C.

Size: ½” BSP male inlet.

Model: 628201 Basic universal handset & 628301 Superior Universal handset.

Marking: Aqualisa on shower handset body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Jing Mei Industrial

Factor: Aqualisa Products Ltd.

WRAS Approval Number  1201315

Print this entry

Shower head and handset with chromium plated brass bodies and EPDM `O` rings incorporating a manual diverter diverting the flow from shower head to shower handset. The shower outlets are supplied with a slide bar. Maximum operating temperature 60°C.

Size: ½” BSP

Model: S3310800

Marking: Globe union on handset.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Shen Zhen Globe Union Industrial Corp

Factor: Globe Union Industrial Corp

WRAS Approval Number  1201011

Print this entry

Wall mounted shower rail (chromium plated brass) incorporating an overhead shower outlet, shower handset and hose with a manually operated diverter. Maximum operating temperature 60°C.

Size: ½” BSP male inlet.

Model: `Clease` C00690.

Marking: WRAS-CL on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen Clease Industries Co. Ltd

Factor:  

WRAS Approval Number  1112046

Print this entry

Range of shower handsets with chromium plated ABS bodies and EPDM seals. Models P71500, P71600, P71700, and P71800 incorporate an adjustable spray setting. Maximum operating temperature 46°C.

Size: ½” BSP male inlets.

Model: P71500, P71501, P71600, P71700 & P71800.

Marking: SL on base of connector.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen Solex High-Tech Industries Co. Ltd

Factor:  

WRAS Approval Number  1301048

Print this entry

Wall mounted body jet shower outlet with chromium plated brass body and EPDM `O` rings. Maximum operating temperature 70°C.

Size: ½" BSP male inlet

Model: 290/B

Marking: `W` on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: THG

Factor:  

WRAS Approval Number  1304023

Print this entry

Shower face that incorporates a chrome plated plastic body, POM strainer on the inlet and EPDM `O` rings Maximum operating temperature 80°C.

Size: ½” BSP male inlet.

Model: Tempesta - 28.214.001.

Marking: `Grohe` logo on body. `Rain` and product information on shower head.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1203339

Print this entry

Plastic shower handset (chromium plated) with a flow adjuster from flow straightener to spay outlet. Maximum operating temperature 85°C.

Size: ½” BSP (M)

Model: Shower L3101SA003GD

Marking: AVONFLOW on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor: Hangzhou Doz Import & Export Co Ltd

WRAS Approval Number  1301334

Print this entry

Range of wall mounted shower panels incorporating a solenoid valve controlling the flow. Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Size: 15 mm copper inlet

Model: 1.1776.001 Rada S.PA1 Shower Panel (White) & 1.1776.002 Rada S.PA1 Shower Panel (Silver)

Marking: Rada on body

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Kohler Mira Limited

Factor:  

WRAS Approval Number  1210311

Print this entry

Wall mounted shower rail kit (chromium plated brass) with an optional spray shower handset and hose. Maximum operating temperature 60°C.

Size: ½” BSP (F)

Model: ELE-MFSRK-C/P

Marking: Vado on shower handset

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Vado

WRAS Approval Number  1209010

Print this entry

Shower handset with white ABS bodies and EPDM `O` rings. Maximum operating temperature 60°C.

Size: ½” BSP male.

Model: P61500.

Marking: S.L. on shower handset.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Xiamen Solex High-Tech Industries Co. Ltd

WRAS Approval Number  1305307

Print this entry

Range of ceiling mounted shower outlets with plated bodies. Maximum operating temperature 65°C. Open outlet use only.

Size: ½” BSP (M)

Model: Cubo doccia medium comprising of: F6.128.14.1 (shower head) and F6.128.12 (ceiling surface body) or F6.128.13 (ceiling recessed housing) Cubo doccia large comprising of: F6.128.04.1 (shower head) and F6.128.02 (ceiling surface body) or F6.128.03 (ceiling recessed housing)

Marking: Viabizzuno & model number on label

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Viabizzuno srl

WRAS Approval Number  1112306

Print this entry

Shower handset with chromium plated ABS body and NBR `O` rings. The product incorporates flow restrictors on the inlet. Maximum operating temperature 50°C.

Size: ½” BSP (M)

Model: Cobra

Marking: Ecocamel on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Ecocamel Ltd.

Factor:  

WRAS Approval Number  1301047

Print this entry

Shower handset with chromium plated ABS body and EPDM `O` ring, incorporating a flow restrictor on inlet. Maximum operating temperature 60°C.

Size: ½" male BSP inlet

Model: F1101

Marking: Aqualogic logo on facia

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Aqualogic WC Ltd.

WRAS Approval Number  1112019

Print this entry

Range of single and multifunction shower outlets with chromium plated ABS and white ABS bodies and EPDM `O` rings. The shower outlets also incorporate flow regulators at the inlets. Maximum operating temperature 60°C.

Size: ½” BSP male inlet.

Model: HAND124WC - 120 single function handset. HAND125WC - 120 multi-function handset.

Marking: Bristan and WRAS on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen Runner Industrial Corporation

Factor: Bristan Group Limited

WRAS Approval Number  1304001

Print this entry

Range of shower outlets with chromium plated brass bodies and EPDM seals. The inlets incorporate flow restrictors. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: 36.517.979 - ½” BSP male inlet. 36.515.979 - 3/8” BSP male inlet

Model: 36.517.979 “WaterBar” body spray. 36.515.979 “WaterPoints” body spray

Marking: Dornbracht on body.

Installation Requirements : R001           

Note: Open outlet use only.

Proviso:  

Manufacturer:  

Factor: Aloys F Dornbracht GmbH & Co KG

WRAS Approval Number  1212074

Print this entry

Range of wall mounted shower outlets with chromium plated brass body and NBR `O` rings. Maximum working pressure 3.0 Bar. Maximum operating temperature 48°C

Size: ½” BSP (M) or 15mm compression inlet.

Model: VR991CP, VR992CP, VR995CP & VR994CP.

Marking: Model number on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Intatec Ltd

WRAS Approval Number  1305010

Print this entry

Range of shower outlets with chromium plated plastic bodies and NBR `O` rings. The shower outlets incorporate an aerator and spray setting. Maximum operating temperature 60°C.

Size: ½” BSP male.

Model: 10 001 1200 - Stella. 10 001 1201 - Stella. 10 001 1300 - Luvi. 10 001 1301 - Luvi. 10 001 1210 - Luna. 10 001 1211 - Luna.

Marking: 'S' on inlet connection

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Showerpro S.R.L.

WRAS Approval Number  1301313

Print this entry

Range of shower handsets incorporating a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Handsets may be supplied with or without an interlocked hose and chromium plated brass wall elbow. Maximum operating temperature 70?C.

Size: ½” BSP (M)

Model: 00052 A1K XXX - Amboise Lapis Lazuli 00052 A1L XXX - Amboise Jaspe Rouge 00052 A1M XXX - Ambiose Onyx nior 00052 A1S XXX - Cheverny Malachilt 00052 A1T XXX - Cheverny Jaspe rouge 00052 A1V XXX - Sully Malachite 00052 A1W XXX - Sully Lapis Lazuli 00052 A1X XXX - Sully Jaspe rouge 00052 A2C XXX - Océania 00052 A2E XXX - Venice 00052 A2F XXX - Naïade 00052 A2G XXX - Ange 00052 A2H XXX - Panthère cristal clair 00052 A2J XXX - Papillon 00052 A2K XXX - Panthère cristal nior 00052 A3T XXX - Amboise Marbre à définir 00052 A3V XXX - Cheverny Marbre à définir 00052 A3Y XXX - Sully Marbte à définr 00052 A44 XXX - Ellipse 00052 A5A XXX - Emotion métal 00052 A5B XXX - Emotion à manettes métal 00052 A5C XXX - Emotion Bois d'Amourette 00052 A5D XXX - Emotion Bois d'Amourette à manettes 00052 A5E XXX - Emotion Ebène 00052 A5F XXX - Emotion Ebène à manettes 00052 A5G XXX - Emotion Galalithe 00052 A5H XXX - Emotion Galalith à manettes 00052 A7L XXX - Poèmes 00052 A8A XXX - Vogue Agate grise 00052 A8B XXX - Vogue Améthyste 00052 A8C XXX - Vogue Arogonite 00052 A8D XXX - Vogue Calcédoine 00052 A8E XXX - Vogue Cornaline 00052 A8F XXX - Vogue Cristal de Roche 00052 A8G XXX - Vogue Quartz fumé 00052 A8H XXX - Vogue Quartz rose 00052 A7J XXX - Vogue Thulite 00052 A8K XXX - Vogue Turquoise 00052 A8M XXX - Vogue Malachite 00052 A8N XXX - Vogue Jaspe rouge 00052 A8P XXX - Vogue onyx noir 00052 A8R XXX - Vogue Oeil de tigre 00052 A8S XXX - Vogue lapis Lazuli 00052 A8P XXX - Vogue Onyx noir 00052 A8R XXX - Vogue Oeil de tigre 00052 A8S XXX - Vouge lapis Lazuli 00052 A9A XXX - Jaipur Aragonite 00052 A9B XXX - Jaipur cristal satine 00052 A9C XXX - Jaipur Onyx noir 00052 A9D XXX - Japiur Quartz rose 00052 A9F XXX - Jaipur Métal 00052 E53 XXX - Najem 00052 G11 XXX - Elysée 00052 G13 XXX - Rochamneau 00052 G14 XXX - Versailles 00052 G18 XXX - Dauphin 00052 G24 XXX - Amour de Trianon 00052 G31 XXX - Cygne 00052 R11 XXX - Paris/Najem 00052 U1A XXX - Mandarine métal 00052 U1D XXX - Mandarine cristal clair 00052 U1E XXX - Mandarine cristal clair satiné 00052 U1F XXX - Mandarine cristal rosalin 00052 U1G XXX - Mandarine cristal rosalin satiné 00052 U1H XXX - Mandarine cristal saphir 00052 U1J XXX - Mandarine cristal saphir cristal 00052 U1K XXX - Mandarine cristal diamant 00052 U1L XXX - Nizua cristal clair 00052 U1M XXX - Nizua cristal clair satiné 00052 U1N XXX - Nizua cristal rosalin 00052 U1P XXX - Nizua cristal rosalin satiné 00052 U1Q XXX - Nizua cristal saphir 00052 U1R XXX - Nizua cristal saphir satiné 00052 U1S XXX - Sully Honey onyx 00052 U1V XXX - Cheverny Onyx noir 00052 U5D XXX - Sun Dragon 00052 U5G XXX - Moon Dragon 00052 U5G XXX - Jade Dragon 00052 U7A XXX - Trocadéro Malachite 00052 U7B XXX - Trocadéro lapis Lazuli 00052 U7C XXX - Trocadéro Jaspe Rouge 00052 U7D XXX - Trocadéro Onyx noir 00052 U7E XXX - Trocadéro Oeil de Tigre 00052 M28 XXX - Opus Cristal 00052 M29 XXX - Opus Cristal A Manettes 00052 M30 XXX - Opus Metal A Manettes 00052 M24 XXX - Henry 00052 M25 XXX - Henry a Manettes The products are available in different finishes and the suffix XXX will be replaced with one of the following finish codes: A02 = Chrome plated. B01 = bright nickel. C01 = Matt nickel. D01 = Clear bronze. D03 = Luxbrass. D05 = Clear matt bronze. D08 = Silver. F01 = Bright gold. F02 = Matt gold. H02 = Matt silver. H03 = Old matt silver. H07 = Old red matt copper. H08 = Old matt silver. H16 = Matt luxbrass. H24 = Old bright red copper.

Marking: `W` on wall elbow and handset

Installation Requirements : R001 R040         

Note: For open outlet use only.

Proviso:  

Manufacturer: THG

Factor:  

WRAS Approval Number  1304303

Print this entry

Range of wall mounted shower outlets with chromium plated bodies. Maximum operating temperature 70°C.

Size: ½” BSP (M)

Model: 26 442 000 Hansgrohe Raindance Rainfall 150. 26 443 000 Hansgrohe Raindance Rainfall 150 RainStream.

Marking: Hansgrohe on backplate

Installation Requirements : R001 R040         

Note: For open outlet use only

Proviso:  

Manufacturer:  

Factor: Hansgrohe SE

WRAS Approval Number  1301312

Print this entry

Range of single function shower handsets with chromium plated brass body, incorporating a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Model 00054 is supplied with an interlocked hose and chromium plated brass wall elbow with rest. Maximum operating temperature 70°C.

Size: ½” BSP (F)

Model: 00054 & 00066 (handset only)

Marking: `W` on handset body

Installation Requirements : R001 R040         

Note: For open outlet use only.

Proviso:  

Manufacturer: THG

Factor:  

WRAS Approval Number  1304302

Print this entry

Range of ceiling mounted shower outlets with chromium plated plastic bodies. Maximum operating temperature 70°C.

Size: ½” BSP (M)

Model: 28 414 180, 28 417 000, 28 418 000

Marking: Hansgrohe and raindance on front shower panel

Installation Requirements : R001 R040         

Note: Open outlet use only

Proviso:  

Manufacturer:  

Factor: Hansgrohe SE

WRAS Approval Number  1304005

Print this entry

Range of shower outlets with chromium plated brass bodies and EPDM seals. The inlets incorporate flow restrictors and single check valves. Model 28.519.780 incorporates a manual flow restriction function. Maximum operating temperature: 80°C.

Size: ½” BSP male inlet

Model: 28.519.780 body spray. 28.518.780 body spray

Marking: Dornbracht on backplate.

Installation Requirements : R001           

Note: Open outlet use only.

Proviso:  

Manufacturer: Aloys F Dornbracht GmbH & Co KG

Factor:  

WRAS Approval Number  1303303

Print this entry

Range of chromium plated shower handsets with plastic bodies. Maximum operating temperature 85°C.

Size: ½” BSP (M)

Model: DS1010CP & HS5018CP

Marking: Ateck on body

Installation Requirements : R001 R040         

Note: Open outlet use only

Proviso:  

Manufacturer: Ateck (Xiamen) Showers Co Ltd

Factor:  

WRAS Approval Number  1302339

Print this entry

Range of shower handsets with ABS bodies and face plate. Maximum operating temperature 85OC.

Size: ½” BSP (M)

Model: A173102 & A173302

Marking: Bristan on body

Installation Requirements : R001 R040         

Note: Open outlet use only

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

WRAS Approval Number  1302338

Print this entry

Range of single and multifunction shower outlets with chromium plated ABS bodies and EPDM `O` rings. Model 20621 incorporates a stainless steel strainer. Maximum operating temperature 85°C.

Size: ½” BSP (M) ½” BSP (F) (model 20621 only)

Model: 10111, 10213, 10315, 10323, 10411, 10423, 10615, 10811 & 20621.

Marking: Bristan on body

Installation Requirements : R001 R040         

Note: Open outlet use only.

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

WRAS Approval Number  1209330

Print this entry

Range of adjustable, plastic (chromium plated) shower heads. Maximum operating temperature 70°C.

Size: ½” BSP (F)

Model: 28 423 000 Hansgrohe Crometta 85 Green shower head, 28 424 000 Hansgrohe Crometta 85 Vario shower head & 28 425 000 Hansgrohe Crometta 85 Multi shower head.

Marking: Hansgrohe Crometta on faceplate.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Hansgrohe SE

Factor:  

WRAS Approval Number  1212303

Print this entry

Range of wall or ceiling mounted shower heads with chromium plated brass bodies incorporating a plastic strainer in the shower head. Maximum operating temperature 70°C. For open outlet use only.

Size: ½” BSP (F)

Model: 27 468 000 Hansgrohe Raindance S Air Shower head 180 with long shower arm, 27 471 000 Hansgrohe Raindance S Air Shower head 180 with shower arm, 27 472 000 Hansgrohe Raindance S Air Shower head 180 with ceiling connector, 27 476 000 Hansgrohe Raindance S Air Shower head 180 with short shower arm, 27 478 000 Hansgrohe Raindance S Air Shower head 180 with ceiling connector, 27 492 000 Hansgrohe Raindance S Air Shower head 300 with long shower arm, 27 493 000 Hansgrohe Raindance S Air Shower head 300 with short shower arm & 27 494 000 Hansgrohe Raindance S Air Shower head 300 with ceiling connector.

Marking: Hansgrohe & Air Power on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Hansgrohe SE

WRAS Approval Number  1301049

Print this entry

Range of shower outlets with brass bodies (available in a variety of finishes) and EPDM `O` rings. Models 910PR & 186PR82 incorporate EPDM flow regulators on the inlet. Maximum working pressure 6.0 Bar. Maximum operating temperature 70°C.

Size: ½ “ & 1” inlet/outlets

Model: 910PR-G00-XXX, 288L-G00-XXX, 280-G00- XXX, 82V-G00- XXX, 286-G00- XXX, 186PR82-G00- XXX & 84-G00, 84BC-G00- XXX. The products are available in different finishes and the suffix XXX will be replaced with one of the following finish codes: A02 = Polished chrome, C02 = Matt chrome, C03 = Satin chrome, G02 polished chrome/polished gold, F01 = Polished gold, F18 = Rhodium silver, F19 = Matt rhodium silver, H03 = Varnished antique silver, H08 = Varnished matt antique silver, F03 = Satin gold, B01 = Polished nickel, C01 = Matt nickel, G01 = Polished nickel/Polished gold, E02 = Matt nickel/polished gold, F07 = Matt gold, D01 = Varnished clear bronze, D05 = Varnished matt bronze, H44 = Polished luxbrass, H16 = Matt luxbrass & H12 = Satin luxbrass.

Marking: 'W' on body

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: THG

Factor:  

WRAS Approval Number  1303022

Print this entry

Shower outlet with chromium plated brass body and EPDM `O` rings. The shower outlet incorporates an ABS spray ring set. Maximum operating temperature 85°C.

Size: 15mm compression.

Model: VR1000 vandal resistant shower head with concealed rear and exposed bottom inlet.

Marking: 'UC' and date of manufacture (mm/yy) on body.

Installation Requirements : R001 R040         

Note: Open outlet use only.

Proviso:  

Manufacturer: Home Well Industrial (Hui Yang) Co. Ltd.

Factor: Bristan Group Limited

WRAS Approval Number  1203083

Print this entry

Idealrain` range of shower kits consisting of a metal shower rail, chrome plated plastic headset, PVC lined flexible hose assembly and chromium plated brass, wall elbow which incorporates a check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum operating temperature 65°C.

Size: ½” BSP male inlet.

Model: B9408AA Idealrain S1 shower kit with 80mm 1F handspray 600mm rail and 1.35m hose. B9410AA Idealrain S3 shower kit with 80mm 3F handspray 600mm rail and 1.3m hose. B9449AA Idealrain S1 shower set with 80mm 1F handspray and 1.3m hose. B9450AA Idealrain S3 shower set with 80mm 3F handspray and 1.35m hose. B9413AA Idealrain S1 shower kit with 100mm 1F handspray 600mm rail and 1.35 hose. B9416AA Idealrain S3 shower kit with 100mm 3F handspray 600mm rail and 1.35 hose. B9426AA Idealrain L3 shower kit with 120mm 3F handspray, 900m rail and 1.8m hose. B9433AA Idealrain XL3 shower kit with 140mm 3F handspray, 900mm rail and 1.8m hose. B9556AA Idealrain S3 shower kit with 80mm handspray, 900mm rail and 1.8 hose. Models added June 2012: B9306AA Armaglide 2 - Shower kit with 1 function handset, 900mm rail and 1.8m hose. B9307AA Armaglide 2 - Shower kit with 3 function handset, 900mm rail and 1.8m hose. B9308AA Armaglide 2 - Shower set with 1 function handset and 1.35m hose. B9309AA Armaglide 2 - Shower set with 3 function handset and 1.35m hose.

Marking: Idealrain models: Ideal Standard on handset. Armaglide 2 models: Armitage Shanks on the handset.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Ideal Standard International (B&K)

Factor: Ideal Standard

WRAS Approval Number  1209325

Print this entry

Plastic shower handset (chromium plated) with optional spray settings. Maximum operating temperature 85°C.

Size: ½” BSP (M)

Model: 700114

Marking: Aqualisa on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen E-Tec Electric Shower Co. Ltd.

Factor: Aqualisa Products Ltd.

WRAS Approval Number  1112318

Print this entry

Overhead shower outlet with a chromium plated brass body and EPDM `O` rings. Maximum operating temperature 70°C.

Size: ½” BSP (F)

Model: Axor 28 484 xxx

Marking: Axor Hansgrohe on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1209331

Print this entry

Wall mounted shower outlets (chromium plated brass). Maximum operating temperature 45°C.

Size: ½” BSP (F)

Model: 2.1799.001 (1740.462) Mira Beat 200mm Deluge Head (Chrome). 2.1799.002 (1740.535) Mira Beat 200mm Deluge Head (White). 2.1799.003 (1740.459) Mira Beat 250mm Deluge Head (Chrome). 2.1799.004 (1740.534) Mira Beat 250mm Deluge Head (White). 2.1799.027 (1740.562) Mira Nectar 200mm Deluge Head (Chrome). 2.1799.028 (1740.563) Mira Nectar 200mm Deluge Head (White). 2.1799.005 (1740.491) Mira Shower Arm. 2.1799.006 (1796.069) Mira Ceiling Mount Shower Arm.

Marking: Kohler Mira Ltd. on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Kohler Mira Ltd

WRAS Approval Number  1212304

Print this entry

Range of ceiling mounted shower heads with chromium plated brass bodies incorporating a plastic strainer at the inlets. Maximum operating temperature 70°C. For open outlet use only.

Size: ½” BSP (F)

Model: 28 474 000 Axor Carlton shower head 240, 28 487 000 Axor Carlton shower head 180 & 28 489 000 Axor Citterio shower head.

Marking: Axor Hansgrohe on body

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Hansgrohe SE

WRAS Approval Number  1303302

Print this entry

Range of shower handsets with white coated plastic bodies. Maximum operating temperature 85°C.

Size: ½” BSP (M)

Model: DS1010WT, HS1081WT & HS5018WT

Marking: Ateck on body

Installation Requirements : R001 R040         

Note: Open outlet use only

Proviso:  

Manufacturer: Ateck (Xiamen) Showers Co Ltd

Factor:  

WRAS Approval Number  1302322

Print this entry

Range of single and multifunction shower outlets with chromium plated ABS bodies and EPDM `O` rings. Model 20621 incorporates a stainless steel strainer. Maximum operating temperature 85°C.

Size: ½” BSP (M) ½” BSP (F) (model 20621 only)

Model: 10111, 10213, 10315, 10323, 10411, 10423, 10615, 10811 & 20621.

Marking: Delux on body

Installation Requirements : R001 R040         

Note: Open outlet use only.

Proviso:  

Manufacturer: Delux (Xiamen) Sanitary Ware Co. Ltd.

Factor:  

WRAS Approval Number  1212305

Print this entry

Range of wall and ceiling mounted shower heads with chromium plated brass bodies incorporating a plastic strainer at the inlet. Maximum operating temperature 70°C. For open outlet use only.

Size: ½” BSP (M)

Model: 27 400 000 Hansgrohe Raindance Classic shower head 180 with ceiling connector, 27 405 000 Hansgrohe Raindance Classic shower head 240with ceiling connector, 27 406 000 Hansgrohe Raindance Classic shower head 300 with ceiling connector, 27 424 000 Hansgrohe Raindance Classic shower head 240 with shower arm, 27 428 000 Hansgrohe Raindance Classic shower head 180 with shower arm & 27 430 000 Hansgrohe Raindance Classic shower head 300 with shower arm.

Marking: Hansgrohe & Air Power on body

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Hansgrohe SE

WRAS Approval Number  1212306

Print this entry

Ceiling mounted shower head with chromium plated plastic body. Maximum operating temperature 50°C. For open outlet use only.

Size: ½” BSP (F)

Model: Ecocamel Jetstorm

Marking: Ecocamel on body. E on faceplate.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Eco Camel Products Ltd

WRAS Approval Number  1212308

Print this entry

Chromium plated brass and black plastic shower handset coupled with a brass interlinked shower hose and optional elbow style shower holder (Vola 070). Hand shower outlet (Vola 070-T2). Vola 070 and Vola T2 models incorporate a non-return valve (not suitable for backflow prevention). Maximum operating temperature 60°C.

Size: Vola 070-T2 ¾” BSP (m) (shower holder only) Models added February 2013: Vola T2M ½” BSP (f) (Shower handset and hose only) Vola 070 ¾” BSP (m) (shower holder, handset and hose)

Model: Vola 070-T2 ¾” BSP (m) (shower holder only) Models added February 2013: Vola T2 ½” BSP (f) (Shower handset and hose only) Vola 070 ¾” BSP (m) (shower holder, handset and hose)

Marking: Vola on shower holder. Vola on handset.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Vola A/S

Factor:  

WRAS Approval Number  1302313

Print this entry

Shower handset with chromium plated brass and plastic body incorporating a single check valve assembly (suitable for backflow prevention to fluid category 2). Supplied with shower hose. Maximum operating temperature 60?C.

Size: ½” BSP (F)

Model: Vola T1M

Marking: Vola on Body

Installation Requirements : R001 R040         

Note: Open outlet use only.

Proviso:  

Manufacturer: Vola A/S

Factor:  

WRAS Approval Number  1303304

Print this entry

Range of overhead, chromium plated shower outlets. Maximum operating temperature 80°C.

Size: 3/8” BSP (F)

Model: Vola 060 & Vola 060A.

Marking: Vola on shower head centre piece

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Vola A/S

Factor:  

WRAS Approval Number  1205008

Print this entry

Wall mounted shower outlet (chromium plated brass) which incorporates a manually adjustable spray direction setting. Maximum operating temperature 90°C.

Size: ¾” BSP male inlet.

Model: 080. 080K & 080D (models added 23rd May 2012).

Marking: Vola on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Vola A/S

Factor:  

WRAS Approval Number  1203082

Print this entry

`Idealrain` & `Armaglide`ranges of shower handsets with chromium plated plastic bodies and EPDM `O` rings incorporating a flow regulator on the inlets. Maximum operating temperature 60°C.

Size: ½” BSP male inlet.

Model: B9400AA Idealrain S1 hand spray 80mm 1F; B9401AA Idealrain S3 hand spray 80mm 3F; Models added June 2012: B9304AA Armaglide 2 - 1 function handset & B9305AA Armaglide 2 - 3 function handset.

Marking: B9400AA Idealrain S1 & B9401AA Idealrain S3: Ideal Standard on handset. B9304AA Armaglide 2 & B9305AA Armaglide 2: Armitage Shanks on handset.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Ideal Standard

Factor:  

WRAS Approval Number  1204005

Print this entry

Range of shower handsets with chromium plated plastic bodies, incorporating adjustable spray settings. Maximum operating temperature 85°C.

Size: ½” BSP male inlets.

Model: HS309 & HS307.

Marking: XZ on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1205323

Print this entry

Overhead shower with a chromium plated brass body and EPDM ‘O’ rings. Maximum operating temperature 70?C.

Size: ½” BSP (F)

Model: 27 380 000 Hansgrohe Raindance E420 Air 1jet overhead shower. 27 383 000 Hansgrohe Raindance E420 Air 1jet overhead shower EcoSmart

Marking: Hansgrohe on face plate

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1205333

Print this entry

Range of shower handsets with chromium plated plastic bodies and EPDM ‘O’ rings. Both models incorporate a stainless steel strainer. 28 532 000 Axor Starck baton hand shower also incorporates a plastic flow regulator. Maximum operating temperature 70°C.

Size: ½” BSP (M)

Model: 28 532 000 Axor Starck baton hand shower.10 531 000 Axor Starck baton hand shower, 1jet.

Marking: Axor Hansgrohe on body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1205334

Print this entry

Range of single and multifunction shower outlets with chromium plated plastic bodies and EPDM `O` rings. Maximum operating temperature 70°C.

Size: ½” BSP (M)

Model: 28 585 000 Hansgrohe Crometta 85 1jet hand shower.28 606 000 Hansgrohe Crometta 85 1jet Ecosmart hand shower.28 562 000 Hansgrohe Crometta 85 Vario hand shower.28 607 000 Hansgrohe Crometta 85 Vario Ecosmart hand shower.28 563 000 Hansgrohe Crometta 85 Multi hand shower.28 608 000 Hansgrohe Crometta 85 Multi Ecosmart hand shower.

Marking: Hansgrohe on body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1212058

Print this entry

Shower handset with chromium plated plastic body and EPDM `O` rings. The inlet incorporates a single check valve cartridge (suitable for backflow protection against fluid category 2), flow regulator and stainless steel strainer. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Size: ½” BSP male inlet

Model: 28.010.979

Marking: 'Dornbracht' on body

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Aloys F Dornbracht GmbH & Co KG

WRAS Approval Number  1205335

Print this entry

Overhead shower outlet with a chromium plated brass body and EPDM `O` rings. Maximum operating temperature 70°C.

Size: ½” BSP (M)

Model: 28 549 xxx Hansgrohe Raindance E 120 EcoSmart shower.28 554 xxx Hansgrohe Raindance S 120 EcoSmart shower.

Marking: Hansgrohe, Raindance & product information on body.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1209324

Print this entry

Plastic shower handset with optional spray settings. Maximum operating temperature 85°C.

Size: ½” BSP (M)

Model: 700115

Marking: Aqualisa on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen E-Tec Electric Shower Co. Ltd.

Factor: Aqualisa Products Ltd.

WRAS Approval Number  1205369

Print this entry

Shower outlet with chromium plated brass body and EPDM `O` rings. The shower outlet incorporates either 4, 6 or 9 spray outlets. Maximum operating temperature 70°C

Size: ½” BSP (F) Connections

Model: 487 - 445 x 445 488 - 620 x 445 489 - 620 x 620

Marking: W at centre of face plate.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: THG

Factor:  

WRAS Approval Number  1205078

Print this entry

Range of shower outlets with chromium plated bodies and EPDM washers and `O` rings. Maximum operating temperature 85°C.

Size: ½” BSP female inlet.

Model: HS119, HS120.

Marking: XZ on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1205079

Print this entry

Range of shower handsets with either chromium plated plastic or chromium plated brass bodies, incorporating EPDM seals and O rings. Maximum operating temperature 85°C.

Size: ½” BSP male inlets.

Model: HS126, HS129, HS123, B100111, HS1110CP, 364, B11663, HS107, L115CP, L292, B11363.

Marking: XZ on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1205090

Print this entry

Range of fixed, wall mounted, shower outlets with chromium plated brass bodes, incorporating EPDM O rings and stainless steel strainers at the inlets.. Supplied with flow regulators. Maximum operating temperature 85°C.

Size: A4672AA and A5451AA – 15mm spigot inlets.A5452AA ½” BSP male inlets.

Model: A4672AA, A5451AA, A5452AA.

Marking: ISI on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Ideal Standard

Factor:  

WRAS Approval Number  1206008

Print this entry

Range of shower heads (chromium plated brass) with EPDM `O` rings. The shower head connections incorporate stainless steel strainers and plastic flow regulators. Maximum operating temperature 60°C.

Size: ½” BSP male inlets.

Model: 28.548.710, 28.548.730, 28.548.780, 28.548.970, 28.568.710, 28.568.730, 28.568.780 & 28.568.970.

Marking: Dornbracht on base plate.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Aloys F Dornbracht GmbH & Co KG

Factor:  

WRAS Approval Number  1205392

Print this entry

Range of shower kits consisting of a chrome plated plastic handset (with optional spray settings) and PVC lined flexible hose assembly. Maximum operating temperature 45°C.

Size: ½” BSP (F)

Model: 2.1642.001 Rada EV Shower Fittings.2.1642.002 Rada Heavy Duty EV Shower Fittings.1.1533.117 Rada Autotherm-3 EV Bath/Shower/Shower Fittings.1.1533.118 Rada Autotherm-3 EV CAT-5 Bath/Shower Fittings.1.462.22.1 Rada CAT-5 Hose Assembly 1.5m Chrome.

Marking: Rada on shower handset

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Kohler Mira Ltd

Factor:  

WRAS Approval Number  1207317

Print this entry

Shower handset with chromium plated ABS bodies and EPDM `O` rings. Maximum operating temperature 60°C.

Size: ½” BSP (M)

Model: Aquair Typhoon AQSAT1

Marking: T on body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Johns Tandrup Metalvarefabrik ApA

Factor: Aqualogic WC Ltd.

WRAS Approval Number  1205089

Print this entry

Range of shower handsets with chromium plated plastic bodies, inlet incorporates plastic flow regulator and a stainless steel strainer, model 28 567 000 has an adjustable spray. Maximum operating temperature 70°C.

Size: ½” BSP male inlets.

Model: Hansgrohe PurVida 150 3jet Ecosmart handshower - 28 567 000. Hansgrohe PurVida 120 1jet Ecosmart handshower - 28 568 000.

Marking: PuraVida & Hansgrohe on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1205395

Print this entry

Range of chromium plated shower handsets with EPDM ‘O’ rings and adjustable spray settings. Maximum operating temperature 70°C

Size: ½” BSP (M)

Model: 28 535 000 Croma E 100 Vario. 28 537 000 Croma E 100 Vario Ecosmart.28 536 000Croma E 100 Multi.28 538 000 Croma E100 Multi Ecosmart.28 539 000 Croma C 100 Multi.

Marking: Hansgrohe and model on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  0903044

Print this entry

Hand held shower head with an ABS body and EPDM `O` ring.

Size: ½" BSP inlet.

Model: LSP-415 water saving hand held shower head.

Marking: Challis printed on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: A L Challis Ltd (T/A Water Controls)

Factor:  

WRAS Approval Number  0903043

Print this entry

Hand held shower head with an ABS body and shower face.

Size: ½" BSP inlet

Model: LSP-315 water saving hand held shower head

Marking: Challis printed on body

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: A L Challis Ltd (T/A Water Controls)

Factor:  

WRAS Approval Number  0909030

Print this entry

`Wand Benson` shower handset with a chromium plated plastic body, NBR seals and two manually controlled spray settings. Maximum working pressure 10.0 bar.

Size: ½" BSP inlet.

Model: Benson.

Marking: Kohler, crafted in Italy and product information moulded into outlet.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Amfag Spa

Factor:  

WRAS Approval Number  0909031

Print this entry

`Wand Mini` shower handset (chromium plated plastic body) with NBR seals and two spray settings. Maximum working pressure 10.0 bar.

Size: ½" BSP inlet.

Model: Mini.

Marking: Amfag moulded onto inlet.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Amfag Spa

Factor:  

WRAS Approval Number  1109301

Print this entry

Range of shower handsets with chromium plated ABS bodies, NBR `O` rings and sliding column. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: ½” BSP (M)

Model: Sliding Columns: RAMA, NADARA and GRAPHIC Shower handsets: CHIARA, AZZURRA, VERA and PURA

Marking: AQA on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: AQA Srl

Factor:  

WRAS Approval Number  1109300

Print this entry

Range of shower heads with chromium plated ABS bodies and NBR `O` rings. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: ½” BSP (M)

Model: MOON, CHIARA, AZZURRA, VERA and PURA

Marking: AQA on rose connector.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: AQA Srl

Factor:  

WRAS Approval Number  0806018

Print this entry

Trigger operated shower head with manually operated locking button incorporating a single check valve DW10 DN6.

Size: ½" BSP.

Model: Shower handle.

Marking: `Triangle` moulded into body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Arjo Hospital Equipment AB

Factor:  

WRAS Approval Number  1007055

Print this entry

Bath spout filler with brass body. The spout outlet incorporates a plastic aerator (Neoperl) and is supplied via a stainless steel braided EPDM lined flexible hose assembly (Hydraquip). Maximum and minimum working pressures 4.0 and 0.06 bar respectively.

Size: Stainless steel braided, EPDM lined flexible hose assembly with ½” BSP captive nut

Model: GA10600

Marking: Model number, bath filler spout and hose, Astor Bannerman contact details printed on adhesive label on bath spout.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Astor Bannerman (Medical) Ltd.

Factor:  

WRAS Approval Number  1109007

Print this entry

Range of shower handsets with chromium plated ABS bodies & EPDM `O` rings. Inlets incorporate flow restrictors. The hand 123C incorporates a three stage manually operated spray setting. Maximum operating temperature 60°C.

Size: ½” BSP male inlets.

Model: HAND 122C, HAND 123C, and HAND 126C.

Marking: Bristan and WRAS on body.

Installation Requirements : R001 R040