Section 1800

Print Entire Section

Taps

Pillar, metal

WRAS Approval Number  1112300

Print this entry

Pillar taps (chromium plated brass) incorporating non-rising spindle type headworks and cross top operating members. Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M).

Model: CDG20T0001.

Marking: Avonflow on body.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1201306

Print this entry

Pillar taps (chromium plated brass) with ceramic disc headwork`s and dome operating members. Supplied with metal backnuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Size: ¾” BSP (M)

Model: CDG20T0003

Marking: Avonflow on body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1301017

Print this entry

Pillar taps (chromium plated brass) incorporating a non-rising spindle headwork with cross top operating members. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size: ½” 2158 High Neck Sink Tap.

Model: ½” 2158 High Neck Sink Tap.

Marking: `BS 5412 Pegler` on headwork. Pegler logo on indice.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Pegler Yorkshire Group Ltd

WRAS Approval Number  1301018

Print this entry

Range of pillar taps (chromium plated brass) incorporating ceramic disc headworks with either single lever or dome type operating members. The spout outlets incorporate plastic flow straighteners & the products are supplied with metal back nuts. Maximum working pressure 6.0 Bar. Maximum operating temperature 85°C.

Size: ½” BSP male Inlet

Model: ½” L502 Leger Sink Pillar Tap. ½” Danum DCD 150 Sink Pillar Tap.

Marking: Both models: 'Pegler' on headwork. L502 model only: Pegler logo on indice.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Pegler Yorkshire Group Ltd

WRAS Approval Number  1301019

Print this entry

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 16.0 bar. Maximum operating temperature 85 °C

Size: ¾” BSP male Inlets

Model: JY2001131, JY2001135 & JY2001535 (single lever operating members). JY01721 (cross top operating members).

Marking: 'Joyou' on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

WRAS Approval Number  1301020

Print this entry

Range of bath and basin pillar taps (chromium plated brass) incorporating a quarter turn ceramic disc headworks with single lever or dome type operating members. The spout outlets incorporate plastic flow straighteners and the products are supplied with metal back nuts. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Size: JY05806 & JY2001435: ¾” BSP male inlets. JY05706 & JY2001415: ½” BSP male inlets.

Model: JY05706 & JY05806 (single lever operating members). JY2001415 & JY2001435 (dome type operating members).

Marking: 'Joyou' on body

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

WRAS Approval Number  1301021

Print this entry

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate plastic flow straighteners and the products are supplied with metal back nuts. Maximum working pressure 16.0Bar. Maximum operating temperature 85°C.

Size: ½” BSP male Inlets

Model: JY2004111, JY2001115 & JY2001515

Marking: 'Joyou' on body

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

WRAS Approval Number  1305303

Print this entry

Range of basin pillar taps, (various finishes), incorporating either a quarter turn ceramic disc or non-rising spindle headwork and a variety of operating members. These products are supplied with metal backnuts. Maximum working pressure 3.0 bar. Maximum operating temperature 80°C.

Size: ½” BSP (M)

Model: DAD1610B Mull heads Extended Spout DAD1610N Mull heads Extended Spout DAD1610C Mull heads Extended Spout DAD1605B Mull heads Standard Spout DAD1605N Mull heads Standard Spout DAD1605C Mull heads Standard Spout DAD1657B Skye heads Standard Spout DAD1657N Skye heads Standard Spout DAD1657C Skye heads Standard Spout DAD1656B Skye heads Extended Spout DAD1656N Skye heads Extended Spout DAD1656C Skye heads Extended Spout DAD1665B Lever Handle Standard Spout DAD1665N Lever Handle Standard Spout DAD1665C Lever Handle Standard Spout DAD1666B Lever Handle Extended Spout DAD1666N Lever Handle Extended Spout DAD1666C Lever Handle Extended Spout B = Brass Finish N = Nickel Finish C = Chrome Finish

Marking: Drummonds on operating member

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Drummonds SP.Z.O.O.

Factor: Drummonds Architectural Antiques Ltd

WRAS Approval Number  1301010

Print this entry

Basin pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headwork and single lever operating members. The spout outlets incorporate a plastic aerator and the taps are supplied with metal back nuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 80°C

Size: ½” BSP male inlet.

Model: RARE COL ½ C

Marking: `Rare` on operating member. `LC` and date of manufacture (mm/yy) on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: M&Z Rubinetterie Spa

Factor: Bristan Group Limited

WRAS Approval Number  1201031

Print this entry

Basin pillar tap (chromium plated brass) incorporating quarter turn ceramic disc headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnut. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP male inlet.

Model: L153 Leger.

Marking: ‘Pegler’ logo on indice.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

Factor:  

WRAS Approval Number  1301009

Print this entry

Bath pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headwork with cross top operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 80°C.

Size: ¾” BSP male inlet

Model: RARE COX ¾ C

Marking: `Rare` on operating member. `LC` and date of manufacture (mm/yy) on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: M&Z Rubinetterie Spa

Factor: Bristan Group Limited

WRAS Approval Number  1112008

Print this entry

Basin pillar taps (chromium plated brass or nickel plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The inlet incorporates a flow regulator, the spout outlets incorporate a plastic flow straightener & the products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP male inlets.

Model: 60011 – 5401 (chromium plated) & 60011 – 5404 (nickel plated).

Marking: Lota on operating member.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1111007

Print this entry

`Europlus E` electronically controlled tap pillar tap assembly (chromium plated brass) activated via infra-red sensors. The spout outlet incorporates a plastic aerator. Single supply only. Maximum working pressure 8 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided SPX lined hose assembly with 3/8” BSP female inlet connections.

Model: `Europlus E` basin mixer - 36.208.

Marking: Grohe, Made in Germany, product information and date of manufacturer in body.

Installation Requirements :             

Note: Inlet connection hoses must be installed where light is excluded.

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1201300

Print this entry

Pillar taps with non rising spindle headworks and dome type operating members (chromium plated brass). Supplied with metal backnuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP (M)

Model: CDG05T0002

Marking: Avonflow on Body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1201301

Print this entry

Pillar taps with quarter turn ceramic disc type headworks and cross top type operating members (chromium plated brass). Supplied with metal backnuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP (M)

Model: CDG05T0004

Marking: Avonflow on Body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1201302

Print this entry

Pillar taps (chromium plated brass) with quarter turn ceramic disc headworks and cross top operating members. Supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC

Size: ½” BSP (M)

Model: CDG05T0005

Marking: Avonflow on body

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1201303

Print this entry

Pillar taps (chromium plated brass) with quarter turn ceramic disc headworks and dome operating members. Supplied with metal backnuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP (M)

Model: CDG05T0006

Marking: Avonflow on body

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1201304

Print this entry

Pillar taps with quarter turn ceramic disk headworks and cross top operating members (chromium plated brass). Supplied with metal backnuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Size: ½” BSP (M)

Model: CDG05T0008

Marking: Avonflow on Body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1201305

Print this entry

Pillar taps (chromium plated brass) incorporating quarter turn headworks and cross top operating members. Supplied with metal backnuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: CDG20T0002

Marking: Avonflow on body

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1201030

Print this entry

Bath pillar tap (chromium plated brass) incorporating quarter turn ceramic disc headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnut. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlet.

Model: L153 Leger.

Marking: ‘Pegler’ logo on indice.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

Factor:  

WRAS Approval Number  1210031

Print this entry

Range of pillar taps (chromium plated brass) incorporating non-rising spindle headworks with dome type or cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP Male inlet.

Model: B9872AA Sandringham 21 & B9879AA Sandringham 21.

Marking: ISI on body. Armitage Shanks on indice of dome operating member.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Armitage Shanks

WRAS Approval Number  1107099

Print this entry

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headwork`s with a range of lever, crosstop or dome operating members. The outlets incorporate plastic flow straighteners & the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” or ¾” BSP male inlets

Model: OR ¾ C, J ½ C & J ¾ C.

Marking: Bristan on operating member. H & manufacturing date (MM/YY) on rear of body.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

WRAS Approval Number  1107100

Print this entry

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with a range of lever, crosstop or dome operating members. The outlets incorporate plastic flow straighteners & the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” or ¾” BSP male inlets

Model: OR ½ C, PS ½ C & PS ¾ C.

Marking: Bristan on operating member. H & manufacturing date (MM/YY) on rear of body

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

WRAS Approval Number  1009405

Print this entry

Basin pillar taps (chromium plated brass) with a quarter turn ceramic disc headwork and single lever operating members (chromium plated zinc). The outlet incorporates a flow straightener and is supplied with metal backnuts. This model is also supplied with flow limiters. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: ½" BSP (M)

Model: 12-011-081

Marking: AKW on operating members

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: DLP Limited

WRAS Approval Number  1009406

Print this entry

Bath pillar taps (chromium plated brass) with a quarter turn ceramic disc headwork and single lever operating members (chromium plated zinc). The spout outlet incorporates a plastic flow straightener and is supplied with brass backnuts. This model is supplied with flow limiters. Maximum working pressure 10.0 bar & maximum temperature 85°C.

Size: ¾ " BSP (M)

Model: 12-011-084

Marking: AKW on operating members

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: DLP Limited

WRAS Approval Number  1107361

Print this entry

Bath pillar taps (chromium plated brass) with ¼ turn ceramic disc headworks and lever operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener. Supplied with plastic backnuts. Maximum working pressure 10.0 bar & maximum operating temperature 85?C.

Size: ¾” BSP (M)

Model: 12-011-055

Marking: AKW on operating member

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer:  

Factor: DLP Limited

WRAS Approval Number  1203378

Print this entry

Range of basin pillar taps (chromium plated brass) with ¼ turn ceramic disc headwork with lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. This model is also supplied with flow limiters. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP (M)

Model: 12-011-051

Marking: AKW on operating member

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: DLP Limited

WRAS Approval Number  1212030

Print this entry

Range of pillar taps (chromium plated brass) with either quarter turn ceramic disc or non-rising spindle headworks. Products are supplied with a variety of operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 80°C.

Size: ½" BSP Inlet

Model: AST-106-C/P - Dome type operating members AST-206-C/P - Cross top operating members AST-306-C/P - Single lever operating member WAR-206-C/P - Dome type operating members VEC-106-C/P - Cross top operating members AVO-206-C/P - Dome type operating members AST-106/CD-C/P - Dome type operating members AST-206/CD-C/P - Cross top operating members AST-306/CD-C/P - Single lever operating member WAR-206/CD-C/P - Dome type operating members VEC-106/CD-C/P - Cross top operating members AVO-206/CD-C/P - Dome type operating members *CD models have ceramic disc headworks.

Marking: Vado logo on body. Eurobath & England on headworks. 'WAR' & 'AVO' Models have Eurobath England on operating members. . BS 5412 on non-rising spindle headwork

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Vado

Factor:  

WRAS Approval Number  1301011

Print this entry

Basin pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headwork with cross top operating members. The spout outlets incorporate a plastic aerator and the taps are supplied with metal back nuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 80°C.

Size: ½” BSP male inlet

Model: RARE COX ½ C

Marking: `Rare` on operating member. `LC` and date of manufacture (mm/yy) on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: M&Z Rubinetterie Spa

Factor: Bristan Group Limited

WRAS Approval Number  1210030

Print this entry

Range of pillar taps (chromium plated brass) with non rising spindle headwork and dome type or cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size:  

Model: B9865AA Sandringham 21 & B9875AA Sandringham 21 ½” BSP male inlets. B9866AA Sandringham 21 & B9876AA Sandringham 21 - ¾” BSP male inlets.

Marking: All models: ISI on body of all models. B9865AA & B9866AA: Armitage shanks on indice.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer:  

Factor: Armitage Shanks

WRAS Approval Number  1212032

Print this entry

Range of pillar taps (chromium plated brass) with either quarter turn ceramic disc or non-rising spindle headworks. Products are supplied with a variety of operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 65°C.

Size: ¾” BSP male Inlets

Model: AST-136-C/P - Dome type operating members AST-236-C/P - Cross top operating members AST-336-C/P - Single lever operating member WAR-236-C/P - Dome type operating members VEC-136-C/P - Cross top operating members AST-136/CD-C/P - Dome type operating members AST-236/CD-C/P - Cross top operating members WAR-236/CD-C/P - Dome type operating members VEC-136/CD-C/P - Cross top operating members *CD models have ceramic disc headworks.

Marking: Vado logo on body. Eurobath and England on headworks. 'WAR' models have Eurobath England on operating members. BS5412 on non-rising spindle headwork.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer:  

Factor: Vado

WRAS Approval Number  1305006

Print this entry

Pillar taps (chromium plated brass) incorporating a rising spindle headwork and a single lever type operating member. The spout outlet incorporates a metal flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Size: ½” BSP / 15mm compression

Model: S8265AA - Markwik

Marking: Armitage Shanks on indice.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Armitage Shanks

WRAS Approval Number  1203333

Print this entry

Pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. Supplied with brass backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: BR11141-000

Marking: Borer on operating member

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Taizhou Borer Clean Tool Co Ltd

Factor:  

WRAS Approval Number  1203004

Print this entry

`Vectis` bath pillar taps (chromium plated brass) with quarter turn ceramic disc headwork and lever type operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: Vectis ¾” bath pillar taps B9686AA.

Marking: Ideal Standard on operating member.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Ideal Standard

Factor:  

WRAS Approval Number  1203005

Print this entry

‘Natos’ range of bath & basin pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate plastic flow straighteners. Model B9689AA incorporates plastic flow restrictors at the inlets. Supplied with metal backnuts Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: Natos B9689AA (½ “ BSP male inlets).Natos B9681AA (¾ “ BSP male inlets).

Model: Natos B9689AA (½ “ BSP male inlets).Natos B9681AA (¾ “ BSP male inlets).

Marking: Ideal Standard on operating member

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Ideal Standard

Factor:  

WRAS Approval Number  1203006

Print this entry

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with a pop-up waste. Maximum working Pressure 10.0 Bar. Maximum operating temperature 70°C

Size: Stainless Steel braided, PEX lined hose assembly incorporating 3/8” captive nut to 15mm compression end connections.

Model: B9678AA – Natos single lever basin mixer

Marking: ‘Ideal Standard’ on operating member

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop-up waste.Inlet connection hoses must be installed where light is excluded.

Proviso:  

Manufacturer: Ideal Standard international (B&K)

Factor: Ideal Standard

WRAS Approval Number  1203007

Print this entry

‘Vectis’ basin pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP male inlets.

Model: Vectis B9685AA.

Marking: Ideal Standard on operating member.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Ideal Standard

Factor:  

WRAS Approval Number  1201013

Print this entry

Basin pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. Supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: ½” male BSP inlets.

Model: ARI301

Marking: UF on headwork’s and HR on operating members.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Ultra Finishing Ltd

Factor:  

WRAS Approval Number  1301008

Print this entry

Bath pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headwork and single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 80°C

Size: ¾” BSP male inlet.

Model: RARE COL ¾ C

Marking: `Rare` on operating member. `LC` and date of manufacture (mm/yy) on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: M&Z Rubinetterie Spa

Factor: Bristan Group Limited

WRAS Approval Number  1212041

Print this entry

Range of pillar taps (chromium plated brass) with quarter turn ceramic disc headworks with a variety of single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Size: ½” BSP male Inlets (15mm compression)

Model: JY2000215, JY2000315, JY2001315, JY2000115, JY2003811 & JY2003011.

Marking: 'Joyou' on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

WRAS Approval Number  1211017

Print this entry

Pillar taps (chromium plated brass) incorporating a quarter turn ceramic disc headwork`s and dome operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 65°C.

Size: ½” BSP Male inlet

Model: PG321 - Radius basin taps

Marking: UF on headworks. Twyford on operating member

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer:  

Factor: Twyford Bathrooms

WRAS Approval Number  1210094

Print this entry

Range of high neck pillar taps (chromium plated brass) incorporating non-rising spindle headworks with a range of cross top or dome operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 1/2" BSP (M)

Model: Cross top operating members MILAN103 & 183X. Dome operating members DCM103.

Marking: DTC34B on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Methven UK

WRAS Approval Number  1112107

Print this entry

Basin pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The inlets incorporate a flow regulator, the spout outlets incorporate a plastic flow straightener & the products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP male inlets.

Model: 08-008-018

Marking: 'AKW' on operating member.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer:  

Factor: DLP Limited

WRAS Approval Number  1207035

Print this entry

Range of basin pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks and a range of single lever, dome & cross-top operating members. Model 102301 incorporates an aerator and Model 101301 a flow straightener at spout outlet. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” B.S.P. Male Inlet.

Model: 102301, M3201, 100801, 101301, M33191 & 110401 (single lever operating members). M3101 (cross top operating member). M3601 (dome operating member).

Marking: Model M3201: BS 5412 CD XZ 24 on headwork. All other models: BS 5412 CD XZ 20 on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1207036

Print this entry

Range of bath pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks and a range of single lever, dome & cross-top operating members. Model 102302 incorporates an aerator at the spout outlet. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” B.S.P. Male Inlet.

Model: 110402, 102302, 100802, 101302, M33192 & M3202 (single lever operating members). M3102 (cross top operating member). M3602 (dome operating member).

Marking: M3202: BS 5412 CD XZ 24 on headwork. All other models: BS 5412 CD XZ 20 on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1207043

Print this entry

Basin pillar tap (chromium plated brass body) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator & the inlet incorporates a check valve (suitable for backflow protection against Fluid Category 2). Maximum working pressure 6.5 bar. Maximum operating temperature 85°C.

Size: ½” B.S.P. Male Inlet.

Model: 4001 HC55.

Marking: Huanri on operating member.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Zhejiang Huanri Sanitation Co Ltd

Factor:  

WRAS Approval Number  1209014

Print this entry

`Cube & Active` ranges of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 85°C

Size: ¾” and ½” BSP Male

Model: B0162AA Cube ½” & B0163AA Cube ¾”. B8074AA Active ½” & B8076AA Active ¾”.

Marking: Ideal Standard logo on operating member

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Standard

WRAS Approval Number  1210004

Print this entry

`Vienna` range of high neck pillar taps (chromium plated brass) incorporating non-rising spindle headworks with a range of cross top or dome operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 1/2" BSP (M)

Model: Cross top operating members K-595M-H2 Vienna, K-595M-H5 Vienna, K-595M-H6 Vienna. Dome operating members K-595M-H7 Vienna

Marking: 'C.K' on Headwork's.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Tsangkuo Industrial Co Ltd

WRAS Approval Number  1209029

Print this entry

Range of pillar taps (chromium plated brass) with quarter turn ceramic disc headwork and a single lever operating member. The spout outlets incorporate a plastic flow straightener and the products are supplied with plastic back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size:  

Model: BL 1-2 C: ½” BSP male end connection. BL 3-4 C: ¾” BSP male end connection

Marking: Bristan on operating member. U MMYY (Month and year of manufacture) on body

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Home Well Industrial (Hui Yang) Co. Ltd.

Factor: Bristan Group Limited

WRAS Approval Number  1209031

Print this entry

Range of pillar taps (chromium plated brass) with quarter turn ceramic disc headworks and either single lever or cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: D138 & D130: ½” BSP. D139 & D131: ¾” BSP.

Model: D130 & D131 (cross top operating members). D138 & D139 (single lever operating members).

Marking: 'Carlota' on base of body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Zhejiang Carlota Sanitary Ware Manufactory Co Ltd

Factor:  

WRAS Approval Number  1212048

Print this entry

Basin pillar taps incorporating a non-rising spindle headworks with cross top operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with brass backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP male inlets.

Model: XE301 - Mansfield.

Marking: Ultra on headworks. Twyford & Hanley on indice.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Twyford Bathrooms

WRAS Approval Number  1211004

Print this entry

`ON` range of bath and basin pillar taps (chromium plated brass). Incorporating ¼ turn ceramic disc headworks and dome type operating members. The spout outlets incorporate plastic flow straighteners. Supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” & ¾” BSP inlets

Model: ON 1/2 C CD, ON 3/4 C CD, ON HNK C CD

Marking: ON 1/2 C CD: U and manufacturer date (MM/YY) on body. ON 3/4 C CD, ON HNK C CD : UC and manufacturer date (MM/YY) on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Home Well Industrial (Hui Yang) Co. Ltd.

Factor: Bristan Group Limited

WRAS Approval Number  1009403

Print this entry

Basin pillar taps (chromium plated brass) with a quarter turn ceramic disc headwork and single lever operating members (chromium plated zinc). The outlet incorporates a flow straightener and is supplied with metal backnuts. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: ½" BSP (M)

Model: ET 120

Marking: Essential on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Bathrooms

WRAS Approval Number  1211009

Print this entry

Pillar taps (chromium plated brass) with quarter turn ceramic disc headworks and dome operating members. Supplied with metal backnuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 Bar. Maximum operating temperature 85 °C

Size: ½” BSP Male

Model: Danum DCD 5150 High Neck

Marking: Pegler on head work

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Pegler Jiangmen.

Factor: Pegler Yorkshire Group Ltd

WRAS Approval Number  1209015

Print this entry

Range of basin and bath pillar taps (chromium-plated brass) incorporating quarter turn ceramic disc headwork and single lever operating member. The spout outlets incorporate a plastic aerator and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” B.S.P. Male Inlets - Models B 5106 AA & B 0169 AA. ½” B.S.P. Male Inlets - Models B 5105 AA & B 0168 AA.

Model: B 5106 AA Cone & B 5105 AA Cone. B 0169 AA Senses & B 0168 AA Senses.

Marking: ISI on body

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Ideal Standard International (B&K)

Factor: Ideal Standard

WRAS Approval Number  1107359

Print this entry

Bath pillar taps (chromium plated brass) with ¼ turn ceramic disc headworks and cross head type operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener. Supplied with metal backnuts. Maximum working pressure 10.0 bar & maximum operating temperature 85?C.

Size: ¾” BSP (M)

Model: ET 141

Marking: 'essential' on body.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Bathrooms

WRAS Approval Number  1203372

Print this entry

Basin pillar taps (chromium plated brass) with ¼ turn ceramic disc headwork and cross type operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP (M)

Model: ET 140

Marking: 'essential' on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Bathrooms

WRAS Approval Number  1303055

Print this entry

Pillar taps (chromium plated brass) incorporating a quarter turn ceramic disc headwork and single lever operating members. The model incorporates a plastic flow straightener and is supplied with a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: B9928AA ¾” BSP male inlets

Model: B9928AA Concept

Marking: Ideal Standard on operating member

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Ideal Standard International (B&K)

Factor: Ideal Standard

WRAS Approval Number  1303008

Print this entry

Pillar taps (chromium plated brass) incorporating a quarter turn ceramic disc headwork and single lever operating members. The model incorporates a plastic aerator in the spout outlet. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: B9925AA ½” BSP male inlets

Model: B9925AA Concept

Marking: Ideal Standard on operating member

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Ideal Standard International (B&K)

Factor: Ideal Standard

WRAS Approval Number  1303007

Print this entry

High neck basin pillar taps (chromium plated brass) with quarter turn non rising spindle head works and single lever operating members. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: ½” BSP male inlets.

Model: H159 High Neck Pillar Tap

Marking: Pegler on indice

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

Factor:  

WRAS Approval Number  1212076

Print this entry

Range of pillar taps (chromium plated brass) with either quarter turn ceramic disc headworks or non-rising spindle headworks. Products are supplied with a variety of operating members as listed below. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 80°C.

Size: ½ BSP Inlet

Model: AST-156-C/P - Dome type operating members. AST-256-C/P - Cross top operating members. AST-356-C/P - Single lever operating member. WAR-256-C/P - Dome type operating members. VEC-156-C/P - Cross top operating members. AST-156/CD-C/P - Dome type operating members. AST-256/CD-C/P - Cross top operating members. AST-356/CD-C/P - Single lever operating member. WAR-256/CD-C/P - Dome type operating members. VEC-156/CD-C/P - Cross top operating members. *CD models have ceramic disc headworks.

Marking: Vado logo on body. Eurobath England on headworks. 'WAR' Models are also marked 'Eurobath England on the operating members.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Vado

WRAS Approval Number  1301016

Print this entry

Range of pillar taps (chromium plated brass) incorporating non rising spindle headwork`s with cross top operating members. The products are supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size: ½” or ¾” BSP male inlets

Model: ½” 2159 Basin Pillar Tap. ¾” 2159 Bath Pillar Tap.

Marking: ½” 2159 model: 'BS5412 Pegler` on headwork and Pegler logo on indice. ¾” 2159: Pegler & England on headwork and Pegler logo on indice.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Pegler Yorkshire Group Ltd

WRAS Approval Number  1302004

Print this entry

Pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headwork and cross top operating members. The product is supplied with metal back nuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 65°C.

Size: ½” BSP male Inlets

Model: RL 5205 CP

Marking: TB on body & UF on headwork.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer:  

Factor: Twyford Bathrooms

WRAS Approval Number  1302005

Print this entry

Basin pillar taps (chromium plated brass) with non - rising spindle head works and cross top operating members. Supplied with plastic back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP inlets.

Model: XF301 - Persuasion basin taps.

Marking: TB on body. Twyfords Hanley on indice. Ultra on headwork.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer:  

Factor: Twyford Bathrooms

WRAS Approval Number  1212040

Print this entry

Range of pillar taps (chromium plated brass) with quarter turn ceramic disc headworks with a variety of single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Size: ¾” BSP male Inlets.

Model: JY2000135, JY2000235, JY2000335, JY2001031 & JY2000631

Marking: 'Joyou' on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

WRAS Approval Number  1303006

Print this entry

Basin pillar taps (chromium plated brass) with quarter turn non rising spindle headwork and single lever operating members. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: ½” BSP male inlets.

Model: H159 Basin Pillar Tap

Marking: Pegler on indice

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

Factor:  

WRAS Approval Number  1201308

Print this entry

Pillar taps (chromium plated brass) with quarter turn ceramic disc headworks and dome operating members. Supplied with metal backnuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Size: ½” BSP

Model: CDG05T0011

Marking: Avonflow on body

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1211008

Print this entry

Pillar taps (chromium plated brass) with quarter turn ceramic disc headworks and dome operating members. Supplied with metal backnuts. The spout outlet incorporates a plastic flow straightener. Model `DANUM DCD ECO WATER SAVING BASIN TAP` supplied with flow regulator. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size: ½” BSP Male

Model: Danum DCD 5153. Danum DCD Eco water saving

Marking: Pegler on head work

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Pegler Jiangmen.

Factor: Pegler Yorkshire Group Ltd

WRAS Approval Number  1204017

Print this entry

‘Meishang’ pre-rinse basin pillar taps (chromium plated brass), incorporating a quarter turn ceramic disc headwork and available with a range of single lever, cross top or dome type operating members. The spout outlet incorporates a plastic flow straightener & the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: ½” BSP male inlet.

Model: Meisheng UK58021L (single lever operating member), UK58021C (cross top) & UK58021R (dome type).

Marking: Pre - Rinse on body. Pre- rinse on dome & lever operating member.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Yuhuan Meisheng Sanitaryware Co. Ltd

Factor:  

WRAS Approval Number  1207034

Print this entry

Basin pillar tap (chromium plated brass body) incorporating a ceramic disk headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature: 85°C.

Size: ½” B.S.P. male inlet.

Model: 100303.

Marking: BS5412CDXZ20 on headwork.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1301015

Print this entry

Pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a metal flow straightener & the products are supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size: ½” BSP Male

Model: Visio- 4K4016

Marking: Pegler on inside of operating member

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Pegler (Jiangmen) Plumbing and Heating Equipment Co. Ltd.

Factor: Pegler Yorkshire Group Ltd

WRAS Approval Number  1207028

Print this entry

Basin pillar taps (chromium plated brass) with quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Size: ½” BSP male inlet.

Model: B7884 AA Ceraplan.

Marking: Ideal Standard on operating member.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Ideal Standard International (B&K)

Factor: Ideal Standard Ltd

WRAS Approval Number  1207027

Print this entry

Bath pillar taps (chromium plated brass) with quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10 bar, Maximum operating temperature 85°C

Size: ¾” BSP male inlets.

Model: B7885AA Ceraplan

Marking: ISI on body.Ideal Standard on operating member.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: 

Factor: Ideal Standard Ltd

WRAS Approval Number  1206001

Print this entry

`Concetto` basin pillar tap (chromium plated brass) incorporating a quarter turn ceramic disc headwork and single lever operating member. The spout outlet incorporates a plastic aerator & the product is supplied with a plastic backnut. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Size: 10mm compression nut inlet.

Model: `Concetto` 32.207.001.

Marking: Grohe on operating member.Grohe, date of manufacture (YY/MM) & Grohe internal code on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1205029

Print this entry

Basin pillar taps (chromium plated brass and gold finish) incorporating non rising spindle headworks with a range of dome and cross top operating members. Spout outlets incorporate plastic flow straighteners & the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP male inlets.

Model: 60016 – 5401 (Chromium plated - Dome)60016 – 5501 (Chromium - Cross top)60016 – 5523 (Gold finish - Cross top)60016 – 5601 (Chromium - Dome)60016 – 5701 (Chromium - Dome)60016 – 5801 (Chromium - Cross top)

Marking: `Lota` on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1205028

Print this entry

Bath pillar taps (chromium plated brass or gold plated brass) incorporating non rising spindle headworks and a range of dome and cross top operating members. The spout outlets incorporate a plastic flow straightener & the products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlet.

Model: 60017 – 5523 (Gold finish and Cross top operating member)60017 – 5401 (Chrome plated - Dome)60017 – 5501 (Chrome plated - Cross top)60017 – 5601 (Chrome plated - Dome)60017 – 5701 (Chrome plated - Dome)60017 – 5801 (Chrome plated - Cross top)

Marking: `Lota` on body.

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1204018

Print this entry

‘Meishang ’ pre-rinse high neck basin pillar taps (chromium plated brass), incorporating a quarter turn ceramic disc headwork and available with a range of single lever, cross top or dome type operating members. The spout outlet incorporates a plastic flow straightener & the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: ½” BSP male inlet

Model: Meisheng UK58031L (single lever operating member), UK58031C (cross top) & UK58031R (dome type).

Marking: Pre - Rinse on body. Pre- rinse on dome & lever operating member.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Yuhuan Meisheng Sanitaryware Co. Ltd

Factor:  

WRAS Approval Number  1203049

Print this entry

Range of basin and bath pillar taps (chromium-plated brass) incorporating quarter turn ceramic disc headwork and single lever operating member. The spout outlet incorporates a plastic flow-straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size:  

Model: CAP 1/2 C & JU 1/2 C: ½” BSP Male Inlets. CAP 3/4 C & JU 3/4 C: ¾” BSP Male Inlets.

Marking: K.E.1010 on body. Bristan on operating member.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Guangdong Huayi Plumbing Fittings Industry Co. Ltd.

Factor: Bristan Group Limited

WRAS Approval Number  1201309

Print this entry

Pillar taps (chromium plated brass) incorporating quarter turn ceramic disc type headwork and dome operating members. Supplied with metal backnuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum working operating 85°C.

Size: ¾” BSP (M)

Model: CDG20T0010

Marking: Avonflow on body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1205329

Print this entry

Wall mounted tap assemblies with rising spindle headworks and cross top operating members. Supplied with sampling nozzle cap. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: ½” BSP

Model: SVSAMP – Vertical Nozzle. SVSAMP02 – Angular Nozzle.

Marking: Pegler on indice.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Atlantic Plastics Ltd

Factor:  

WRAS Approval Number  1209113

Print this entry

Range of pillar taps (chromium plated brass) with quarter turn ceramic disc headwork and single lever or cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” male BSP.

Model: B9882AA Sandringham 21 (single lever operating members).

Marking: ISI on body

Installation Requirements : R001 R005         

Note:  

Proviso:  

Manufacturer:  

Factor: Armitage Shanks

WRAS Approval Number  1209112

Print this entry

Range of pillar taps (chromium plated brass) with quarter turn ceramic disc headwork and single lever or cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size: ½” male BSP

Model: B9881AA Sandringham 21 (single lever operating members) & B9885AA Sandringham 21 (single lever operating members).

Marking: ISI on body.

Installation Requirements : R001 R006