Section 2390

Print Entire Section

Washing Machines

Dish

Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number  1205388

Print this entry

Range of front loading commercial dishwashing machines with a Type AB air gap supplied via a solenoid valve. Maximum working pressure 4.0 bar. Maximum supply temperature 85°C.

Size: ¾” BSP (M)

Model: F4 EHRA, F3 EHRA, F4 EHR & F3 EHR.

Marking: Comenda on front panel. Manufacturers name, model number, serial number, maximum working pressure on side of appliance.

Installation Requirements :             

Note: This appliance incorporates a Fluid Category 5 backflow prevention device.

Proviso:  

Manufacturer: Comenda Ali Spa

Factor: Dawson MMP Ltd

WRAS Approval Number  1304324

Print this entry

Range of under-counter and pass-through commercial dishwashers incorporating a type AB airgap. Maximum working pressure 4.0 bar. Maximum operating temperature 55°C.

Size: 3/4” BSP (F)

Model: Undercounter: X-60, S-60 X-60B, S-60B (drained pump version) Passthrough: X-100C, X-120C S-100C, S-120C

Marking: Supra, Sammic and company logo on front of case. S.L, model, address and other technical information on data label

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Sammic S.L.

Factor:  

WRAS Approval Number  1305039

Print this entry

Range of commercial hood style dishwasher machines. Water is supplied via a EPDM stainless steel braided flexible hose assembly controlled by a solenoid valve and discharges via a type AA air gap. Maximum working pressure 6.0 bar. Maximum working temperature 50°C.

Size: 3/4” captive nut.

Model: AMIKA9XL, D2020 & 101GS.

Marking: AMIKA9XLBT: AMIKA9XLBT on front of machine. D2020: D2020 Maidaid Halcyon on front of machine. 101GS: 101GS Maidaid on front of machine

Installation Requirements : R001 R150 R450       

Note: This appliance incorporates a Fluid Category 5 backflow prevention device.

Proviso:  

Manufacturer: Elettrobar

Factor: Maidaid Halcyon

WRAS Approval Number  1206057

Print this entry

Range of hood style dishwashing machines. Water is supplied by a PVC flexible hose assembly controlled by a solenoid valve and discharges via a type `AA` airgap. The appliance also incorporates a non-verifiable double check valve assembly (suitable for backflow protection against Fluid Category 3) Maximum working pressure 1.5 bar at 60°C or 10.0 bar at 25°C.

Size: PVC flexible hose assembly with ¾” BSP captive nut end connections.

Model: SW600, SW700, SW900, SW1000 & SW1300

Marking: Nelson logo, model and product information on adhesive label on back panel.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Nelson Dish and Glasswashing Machines Ltd.

Factor:  

WRAS Approval Number  1305038

Print this entry

Range of commercial front loading style dishwasher machines. Water is supplied via an EPDM stainless steel braided flexible hose assembly controlled by a solenoid valve and discharges via a type AA air gap. Maximum working pressure 6.0 bar. Maximum working temperature 50°C.

Size: 3/4” captive nut.

Model: 51GS, C510, D510, AMIKA6XL.

Marking: 51GS- 51GS: Maidaid on front of machine Amika 6XLBT: Amika 6XLBT on front of machine. C510A: C510A Maidaid Halcyon on front of machine. D510: D510 Maidaid Halcyon on front of machine.

Installation Requirements : R001 R150 R450       

Note: This appliance incorporates a Fluid Category 5 backflow prevention device.

Proviso:  

Manufacturer: Elettrobar

Factor: Maidaid Halcyon

WRAS Approval Number  1305319

Print this entry

Utensil washing machines. Water is supplied by a flexible hose assembly controlled by a solenoid valve and discharges via a type `AB` air gap. Maximum working pressure 10.0 bar. Cold supply only.

Size: ¾” BSP (M)

Model: NVT - 12 Utensil Washer

Marking: Cresta, telephone number, Norbake and address on adhesive label. Cresta, model, serial number and other technical info on data label.

Installation Requirements : R001           

Note: This appliance incorporates a fluid category 5 backflow prevention device.

Proviso:  

Manufacturer: Shanghai Veetsan Commercial Machinery Co., Ltd.

Factor: Veetsan Machinery & Equipment Ltd

WRAS Approval Number  1212108

Print this entry

Range of floor standing glass washers with flow controlled by solenoid valves. The inlet incorporates a non-verifiable double check valve assembly (suitable for protection against fluid category 3 risk). Supplied with a Y strainer. Maximum working pressure 3.0 bar. Cold water use only.

Size: PVC flexible hose with ¾” BSP captive nut.

Model: WT2TOPDI, WT1WS, NGWDPDD, NGWDPDDG, GW2DPG & GW2WSDPG WT = Glass washer with cold rinse. NGW = Glass washer with cold rinse. 2 = large glass washer. 1 = small glass washer. DI = detergent dispenser and door insulation. TOP = rinse booster pump + drain pump. WS = water softener. DP = drain pump. DD = detergent dispenser. G = UK market.

Marking: Alpeninox on control panel. Model and product info on side panel.

Installation Requirements : R001           

Note: These appliances incorporate a fluid category 3 backflow prevention device.

Proviso:  

Manufacturer:  

Factor: Electrolux Professional SpA

WRAS Approval Number  1205054

Print this entry

Range of free standing commercial dish washers. Flow is supplied by a PVC flexible hose controlled by a solenoid valve and discharged via a type `AB` air gap. Maximum working pressures 3.0 bar. Maximum operating temperature 90°C

Size: PVC flexible hose assembly with ¾” BSP captive

Model: MS 9451 WBA, MS 9453 WBA, MS 9500 WBA, MS 9501 WBA, MS 9503 WBA, MS 9100 WBA, MS 9120 WBA, MS 9120A WBA & MS 1300 E WBA Additional models added June 2012 MS 9800 WBA, MS 9801 WBA, MS 9803 WBA, ECO 50 WBA & ECO 90 WBA.

Marking: Mach logo on front panel. Mach logo, model number and product information on side panel.

Installation Requirements : R001 R120 R150       

Note: These appliances incorporate fluid category 5 backflow protection devices.

Proviso:  

Manufacturer: Mach Spa

Factor:  

WRAS Approval Number  1206341

Print this entry

Range of pass through commercial dishwashing machines with two built in Type AA air gaps. Optional double check valve and water meter available. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C

Size: ¾ BSP (F) Inlet connection

Model: Meiko M-IQ Series: 1.M-IQ B-xxx, 2. M-IQ K-xxx & 3.M-IQ KA-xxx. Key: 1 - 3 Describes the main type of machine, B - Conveyor type transport dishwasher machines, K - Rack type dishwashing machines & KA - Container dishwashing machine. The further product code (xxx) describes the machine sizes: M - Number of washing zones (M = 2), 7 - Passage widths 750 mm, 4 - Passage heights 465 mm, GB - Special option - dishes and containers, V8 - Prewash zone length 800 mm, N33 - Dwell zones 2x300mm & P8 Pumped final rinse Zone 600mm.

Marking: Casing moulded Meiko. Data label on side of machine casing showing Manufacturer name and address, Type, serial number and other technical information

Installation Requirements :             

Note: These appliances incorporate Fluid Category 5 backflow protection.

Proviso:  

Manufacturer: Meiko Maschinebau GmbH & Co KG

Factor:  

WRAS Approval Number  1006319

Print this entry

Range of hood style dishwashing machines having a solenoid valve and fill hose connected to a Type ‘AA’ air gap assembly which supplies water to the heater within the machine. Maximum supply pressure 6.0 Bar. Maximum operating temperature 60°C.

Size: ¾” BSP (M) Inlet connection.

Model: SMEG CWC 601 DE & SMEG CWC 601 D. Models added April 2012: SMEG CWC 621 D & NELSON NWC 611 D. Models Added July 2012: CWC 631 DHE, CWC 621 DH & CWC 621 SD. Models added May 2013: SMEG CWC 621 D-1, CWC 611 D-1, CWC 631 DHE-1 & CWC 621 DH-1 and NELSON NW600. Models Added July 2012: CWC 631 DHE, CWC 621 DH & CWC 621 SD

Marking: SMEG Models: SMEG, model number & technical information on data plate on side of machine. NELSON Models: Nelson, model number & technical information on data plate on side of machine.

Installation Requirements : R001 R150         

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Bonferraro Spa

Factor:  

WRAS Approval Number  1209061

Print this entry

Range of commercial soak tank utensil washing machines. Flow is controlled by a solenoid valve and float switch arrangement and discharges via a type `AA` air gap arrangement. Maximum working pressure 10.0 bar. Cold supply only.

Size: Stainless steel braided EPDM Lined flexible hose assembly with ¾” BSP captive nuts.

Model: Grime Reaper GRI, GR2, GR3 and GR4.

Marking: Grime Reaper logo & model number on front panel. Grime Reaper & product information on control panel Grime Reaper & company details on lid Grime Reaper, model number, company details on side panel.

Installation Requirements : R001 R150         

Note: This appliance incorporates a fluid category 5 backflow protection device.

Proviso:  

Manufacturer: Grime Reaper Products Ltd.

Factor:  

WRAS Approval Number  1301075

Print this entry

Range of front loading commercial dishwashers with the flow controlled by solenoid valves. The appliances incorporate ion exchange water softeners (salt regenerated). Maximum working pressure 10.0 bar. Cold water use only.

Size: ¾” BSP.

Model: Profi-Line PG8080, PG8081, PG8082 & PG8083.

Marking: Miele Professional on control panel. Miele logo, model no, and product info on back panel.

Installation Requirements : R001           

Note: This appliance has no backflow prevention device built in but is supplied with a double check valve assembly, suitable for backflow protection against FC3 risk.

Proviso: Discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.

Manufacturer: Miele & Cie KG.

Factor: Miele Co Ltd

WRAS Approval Number  1302028

Print this entry

Range of hood style dishwashing machines. Water is supplied by a flexible hose assembly controlled by a solenoid valve and discharges via a type `AB` air gap. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Size: Stainless steel braided, EPDM lined flexible hose assembly with ¾” BSP captive nut.

Model: ECOMAXF502-20, ECOMAXF502S-20, ECOMAXH602-12, ECOMAXH602-11, ECOMAX502-20, ECOMAX502S-20, ECOMAX602-12 & ECOMAX602-11.

Marking: Ecomax by Hobart, technical information & date of manufacture (yyyy) on body.

Installation Requirements : R001           

Note: These appliances incorporate a fluid category 5backflow prevention device.

Proviso:  

Manufacturer: Hobart UK

Factor: Hobart Mascinen GmbH

WRAS Approval Number  1302031

Print this entry

Front loading dishwashing machine with flow controlled by a solenoid valve and discharged via a type `AB` air gap arrangement. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Size: ½” BSP elbow inlet.

Model: Granule Solo.

Marking: Solo on front panel. Solo & Granuldisk on control panel. Granuldisk, Solo and product information on back panel.

Installation Requirements : R001           

Note: This appliance incorporates a fluid category 5 backflow protection device.

Proviso:  

Manufacturer: Granuldisk AB.

Factor:  

WRAS Approval Number  1205038

Print this entry

Range of commercial front loading style dishwasher machines. Water is supplied via an EPDM stainless steel braided flexible hose assembly controlled by a solenoid valve and discharges via a type AA air gap. Maximum working pressure 6.0 bar. Maximum working temperature 50°C.

Size: 3/4” captive nut.

Model: 51GS, C510, D510, AMIKA6XL.

Marking: 51GS- 51GS: Maidaid on front of machine Amika 6XLBT: Amika 6XLBT on front of machine. C510A: C510A Maidaid Halcyon on front of machine. D510: D510 Maidaid Halcyon on front of machine.

Installation Requirements : R001 R150 R450       

Note: This appliance incorporates a Fluid Category 5 backflow prevention device.

Proviso:  

Manufacturer: Miele GmbH

Factor: Maidaid Halcyon

WRAS Approval Number  0807035

Print this entry

Range of hood commercial dishwashing machines which the flow controlled via a solenoid valve (EKI) and discharged via a Type `AA` air gap arrangement into a stainless steel cistern. Maximum working pressure 5.0 bar.

Size: ¾" BSP captive nut.

Model: GL 1040-BTI & AP1200-BTI. GL 1240-BTI & AL1400 E-BTI. AP 1000-BTI & AE1200-BTI. AE 1000-BTI.

Marking: Aristarco, model number and product information printed on adhesive label on body.Aristarco and model number badged on front panel.

Installation Requirements : R001 R450         

Note: These appliances incorporate a Fluid Category 5 backflow prevention device.

Proviso:  

Manufacturer: Aristarco S.p.A.

Factor:  

WRAS Approval Number  0807037

Print this entry

Range of commercial dishwashing machines which are supplied via a flexible hose (Flexinox) and controlled via a solenoid valve (EKI) and discharges via a Type `AA` air gap arrangement into a stainless steel cistern which feeds a booster pump and built-in heater. Maximum working pressure 5.0 bar.

Size: ¾" BSP captive nut.

Model: AP 45.30-BTI. AP 50.32-BTI. AE 45.30-BTI. AE 50.32-BTI. AL 50.34 EM-BTI & AL50.34 E-BTI. AL 50.40 EM-BTI & AL50.40 E-BTI. AP 50.35-BTI.

Marking: Aristarco Italy, Aristarco logo and model number badged on front panel.Aristarco, model number and product information printed on adhesive label on front panel.

Installation Requirements : R001           

Note: These appliances incorporate a Fluid Category 5 backflow prevention device.

Proviso:  

Manufacturer: Aristarco S.p.A.

Factor:  

WRAS Approval Number  1006318

Print this entry

Under counter dishwashing machine having a solenoid valve (T&P Spa) and fill hose (Reflex Srl) connected to a Type ‘AA’ air gap assembly which supplies water to the heater within the machine. Maximum supply pressure 6.0 Bar at 60°C.

Size: ¾" BSP (M) Inlet connection.

Model: SMEG CW 501 SDE. Model added 16th April 2012: SMEG CW 531 SDE. Model Added May 2013: SMEG CW 531 SDE-1

Marking: Data plate on side of machine printed with SMEG, model number and water supply pressures and temperatures

Installation Requirements : R001 R150         

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Bonferraro Spa

Factor:  

WRAS Approval Number  1001332

Print this entry

Under counter dishwashing machine having a solenoid valve (T&P Spa) and fill hose ( Reflex Srl) connected to a Type `AA’ air gap assembly which supplies water to the heater within the machine. Maximum supply pressure and temperature 6 bar and 60°C.

Size: ¾" BSP (F) Inlet connection

Model: SMEG CW500RU & SMEG CW 501 D. Models added 16th April 2012: SMEG CW 521 D & NELSON NW 511 D Models added May 2013: SMEG CW 521 D-1 & CW511D and Nelson NW500 & NW500T.

Marking: SMEG Models: Data plate on side of machine printed with SMEG, model number and water supply pressures and temperatures. NELSON Model: Data plate on side of machine printed with NELSON, model number and water supply pressures and temperatures.

Installation Requirements : R001 R150         

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Bonferraro Spa

Factor:  

WRAS Approval Number  1001333

Print this entry

Under counter dishwashing machine having a solenoid valve (T&P Spa) and fill hose ( Reflex Srl) connected to a Type `AA’ air gap assembly which supplies water to the heater within the machine. The machine also incorporates a water softener. Maximum supply pressure and temperature 6 bar and 60°C.

Size: ¾" BSP (F) Inlet connection

Model: SMEG CW500RUSD & SMEG CW 501 SD. Models added 16th April 2012: SMEG CW 521 SD & NELSON NW 511 SD. Models Added May 2013: SMEG CW 521 SD-1 & CW 511 SD and NELSON NW 500 WS & NW 500 TWS

Marking: SMEG Models: Data plate on side of machine printed with SMEG, model number and water supply pressures and temperatures. NELSON Model: Data plate on side of machine printed with NELSON, model number and water supply pressures and temperatures.

Installation Requirements : R001 R160         

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Bonferraro Spa

Factor:  

WRAS Approval Number  0810041

Print this entry

Range of commercial dishwashing machines with flow control via a solenoid valve (RPE Srl) and discharged via a Type `AB` air gap. Maximum operating pressure 5.0 bar.

Size: ¾" BSP inlet.

Model: C25/DP, C45/DP, C55/DP, C350/DP, C400/DP.

Marking: `ChefQuip` and model printed on front of machine.

Installation Requirements : R001           

Note: These appliances incorporate a Fluid Category 5 backflow prevention device.

Proviso:  

Manufacturer: A.T.A Srl.

Factor: ChefQuip Limited

WRAS Approval Number  0904337

Print this entry

Range of commercial dishwashing machines having a solenoid valve fitted to the cold water inlet to a Type `AB` air gap assembly which supplies water to the heater within the machine. Maximum supply pressure 4 bar.

Size: ¾" BSP (F) Inlet connection.

Model: LC700 BT, LC900, LC1200, LC411 & LC411 MA RCD. Models added December 2012: LC411RCD & LC411MRCD.

Marking: Data plate on side of machine showing manufacturers name, model number and maximum and minimum operating pressures.

Installation Requirements : R001           

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Comenda

Factor: Dawson MMP Ltd

WRAS Approval Number  1106339

Print this entry

Front loading dishwashing machine having a solenoid valve fitted to the cold water inlet to a type `AB` air gap assembly which supplies water to the heater within the machine. Supplied with double check valve assembly. Maximum supply pressure 4.0 bar. Cold water connection only.

Size: ¾” BSP (F) Inlet connection

Model: LF324/A Front Loading Dishwashing machine. From July 2011 this product will be named LF324MA RCD.

Marking: Comenda Ali Spa on casing. Data plate on side of machine with Comenda Ali Spa, model number and minimum & maximum operating pressures.

Installation Requirements : R001 R160         

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Comenda Ali Spa

Factor: Dawson MMP Ltd

WRAS Approval Number  0903324

Print this entry

Range of under counter dishwashing machines having a solenoid valve (Elbi) fitted to the cold water inlet to a Type `AB` air gap assembly which supplies water to the heater within the machine. Maximum supply pressure 4.0 .bar

Size: ¾" BSP (F) Inlet connection.

Model: LF321 Front Loading Dishwashing machineLF324 Front Loading Dishwashing machineLF324/A Front Loading Dishwashing machine.

Marking: Data plate on side of machine showing manufacturers name, model number and maximum and minimum operating pressures.

Installation Requirements : R001 R520         

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Comenda

Factor: Dawson MMP Ltd

WRAS Approval Number  0912323

Print this entry

Range of pass through dishwashing machines having solenoid valves (Elbi) supplying separate water paths for washing and rinsing. The wash cycle is supplied through a Type AB airgap assembly with a 300mm upstand, and the rinse cycle is supplied through a break tank that incorporates a Type AB air gap. water appliance which is supplied via a Type `AB` air gap assembly. A double check valve ( Barberi ) is also supplied with the machine. Maximum supply pressure 4 bar.

Size: ¾" BSP (F) Inlet connection

Model: ACS range of conveyor dishwashing machines ACS91, ACS101, ACS122, ACS161, ACS162, ACS181, ACS182 ACS201, ACS202, ACS241 & ACS242. ACRS range of conveyor dishwashing machines ACRS145, ACRS205, ACRS225, ACRS245, ACRS260, ACRS265 & ACRS305. AC2A Conveyor Dishwashing Machine. ACL range of conveyor dishwashing machines ACL100 & ACL150. Models added December 2012: AC2 Series Conveyor Dishwashers: AC2, AC2A, AC2P, AC2APAC2E, ACAE, AC2EP5, AC2AEP5, AC2EP6, AC2AEP6, AC2EP9 & AC2AEP9. Model added April 2013: AC3 range of Conveyor dishwashing machines: AC3-20, AC3-20A, AC3-25, AC25A, AC3-30, AC30A, AC-35, AC35A & AC3-40.

Marking: Data plate on side of machine with Comenda`s name and address, model number and maximum and minimum operating pressures.

Installation Requirements : R001           

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Comenda

Factor: Dawson MMP Ltd

WRAS Approval Number  0912324

Print this entry

Range of pass through dishwashing machines having solenoid valves (Elbi) supplying separate water paths for washing and rinsing. The wash cycle is supplied through a Type AB airgap assembly with a 300mm upstand, and the rinse cycle is supplied through a break tank that incorporates a Type AB air gap. water appliance which is supplied via a Type `AB` air gap assembly. Maximum supply pressure 4 bar.

Size: ¾" BSP (F) Inlet connection.

Model: NE3002, NE4002, NE5002, NE5502, NE7002, NE7502, NE9002 & NE9502. NL302, NL402, NL502, NL552, NL303/E, NL502/E & NL552/ENG. NGR602, NGR902, NGR602/E. NG602, NG902, NG1202, NG602/E, NG902/E & NG1202/E.

Marking: Data plate on side of machine with Comenda`s name and address, model number and maximum and minimum operating pressures.

Installation Requirements : R001           

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Comenda

Factor: Dawson MMP Ltd

WRAS Approval Number  0904336

Print this entry

Range of commercial dishwashing machines having a solenoid valve fitted to the cold water inlet to a Type `AB` air gap assembly which supplies water to the heater within the machine. Maximum supply pressure 4 bar. Cold water connection only.

Size: ¾" BSP (F) Inlet connection.

Model: C1000 BT, C1300, C800e & C800EA RCD.

Marking: Data plate on side of machine showing manufacturers name, model number and maximum and minimum operating pressures.

Installation Requirements : R001           

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Comenda

Factor: Dawson MMP Ltd

WRAS Approval Number  0904335

Print this entry

Range of commercial dishwashing machines having a solenoid valve (Elbi) fitted to the cold water inlet to a Type `AB` air gap assembly which supplies water to the heater within the machine. Maximum supply pressure 4 bar.

Size: ¾" BSP (F) Inlet connection.

Model: XLC Multipurpose Pass Through Container and Dishwasher.

Marking: Data plate on side of machine showing manufacturers name, model number and maximum and minimum operating pressures.

Installation Requirements : R001           

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Comenda

Factor: Dawson MMP Ltd

WRAS Approval Number  0912322

Print this entry

Range of under counter dishwashing machines having a solenoid valve (Sirai) fitted to the cold water inlet to a Type `AB` air gap assembly which supplies water to the heater within the machine. Maximum supply pressure 4 bar.

Size: ¾" BSP (F) Inlet connection.

Model: GE 125, GE 115, GE 100, GE 80, GE 75, GE 65, GE 60 & GE 50.

Marking: Data plate on side of machine with Comenda`s name and address, model number and maximum and minimum operating pressures.

Installation Requirements : R001 R150         

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Comenda

Factor: Dawson MMP Ltd

WRAS Approval Number  1007047

Print this entry

Pressurised, basic undercounter glasswashers. Flow is controlled via a solenoid valve (Elbi) and supplied by an inlet hose (Reflex). Maximum and minimum working pressure 7.0 bar and 2.0 bar respectively.

Size: Flexible re-inforced PVC hose with ¾” captive nut.

Model: EUC1G & NUC1G.

Marking: Electrolux and logo printed onto control panel.Model number and product information printed on adhesive label on side panel.

Installation Requirements : R001 R160         

Note: This appliance does not incorporate any backflow protection.

Proviso:  

Manufacturer: Electrolux Professional Spa

Factor: Electrolux Professional Ltd

WRAS Approval Number  1007046

Print this entry

Under counter atmospheric, insulated, commercial dishwashers. The appliances are fed via a flexible hose (Reflex) and flow is controlled via a solenoid valve (Elbi) & discharges via a type `AB` air gap arrangement. Maximum and minimum working pressure 7.0 bar, and 0.5 bar respectively.

Size: Flexible reinforced PVC hose with ¾” captive nuts.

Model: EUCAIG & AUCAIG.

Marking: Washsafe, control printed on control panel. Model number and product information printed on adhesive label on side panel.Electrolux and logo printed onto door.

Installation Requirements : R001 R520         

Note: This appliance incorporates a fluid category 5 backflow protection device.

Proviso:  

Manufacturer: Electrolux Professional Spa

Factor: Electrolux Professional Ltd

WRAS Approval Number  1007048

Print this entry

Commercial hood type atmospheric insulated dishwashers. The appliances are fed via a flexible hose and flow is controlled via a solenoid valve and discharges via a Type `AB` airgap arrangement. Maximum and minimum working pressure 7.0 bar, and 0.5 bar respectively.

Size: Flexible reinforced PVC hose with ¾” captive nut.

Model: EHTAIG & AHTAIG.

Marking: Electrolux and logo printed onto hood.Washsafe control printed on front panel. Model number and product information printed on adhesive label on side panel.

Installation Requirements : R001           

Note: This appliance incorporates a fluid category 5 backflow protection device.

Proviso:  

Manufacturer: Electrolux Professional Spa

Factor: Electrolux Professional Ltd

WRAS Approval Number  1007049

Print this entry

Atmospheric, insulated, hood type dishwashers. Flow is controlled via a solenoid valve (Elbi) supplied by inlet hose (Reflex) and discharges via a type `AB` airgap arrangement incorporating an ion exchange (salt regenerated) water softener assembly. The inlet incorporates (Caleffi) double check valve suitable for protection against fluid category 3. Maximum and minimum working pressures 3.0 bar and 0.5 bar respectively.

Size: Flexible reinforced PVC hose with ¾” captive nut.

Model: EHTAIWSG & AHTAIWSG.

Marking: Washsafe control printed on front panel. Model number and product information printed on adhesive label on side panel.Electrolux and logo printed onto hood.

Installation Requirements : R001 R520         

Note: This appliance incorporates a fluid category 5 backflow protection device.

Proviso:  

Manufacturer: Electrolux Professional Spa

Factor: Electrolux Professional Ltd

WRAS Approval Number  1007050

Print this entry

Undercounter, insulated, atmospheric dishwashers. Flow is controlled via a solenoid valve (Elbi) supplied by inlet hose (Reflex) and discharges via a type `AB` airgap, incorporated in an ion exchange (salt regenerated) water softener assembly. The inlet incorporates (Caleffi) double check valve suitable for protection against fluid category 3. Maximum and minimum working pressures 3.0 bar and 0.5 bar respectively.

Size: Flexible reinforced PVC hose with ¾” captive nuts.

Model: EUCAIWSG & AUCAIWSG.

Marking: Washsafe control printed on control panel. Model number and product information printed on adhesive label on side panel.Electrolux and logo printed onto door.

Installation Requirements : R001 R520         

Note: This appliance incorporates a fluid category 5 backflow protection device.

Proviso:  

Manufacturer: Electrolux Professional Spa

Factor: Electrolux Professional Ltd

WRAS Approval Number  1007045

Print this entry

Atmospheric, insulated, hood type commercial dishwashers. The appliances are fed via a flexible hose (Reflex) and flow is controlled via a solenoid valve (Elbi) & discharges via a type `AB` air gap arrangement. Maximum and minimum working pressure 7.0 bar, and 0.5 bar respectively.

Size: Flexible reinforced PVC hose with ¾” captive nut.

Model: EHTG & NHTG.

Marking: Electrolux and logo printed on control panel. Model number and product information printed on adhesive label on side panel.

Installation Requirements : R001           

Note: This appliance incorporates a fluid category 5 backflow protection device.

Proviso:  

Manufacturer: Electrolux Professional Spa

Factor: Electrolux Professional Ltd

WRAS Approval Number  0810318

Print this entry

Range of commercial dishwashers having a solenoid valve (T&P) at the inlet discharging via a type `AB` air gap. Maximum operating pressure 4.0 bar. Note This appliance has a fluid 5 backflow prevention device built-in.

Size: ¾" BSP inlet

Model: C34, C44 ELT BA and C66 ELT BA.

Marking: Front casing badged manufacturers name and model number, data plate on side of appliance showing manufacturers name, model number, volts, CE Mark and serial number of appliance.

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer: Elframo Spa

Factor:  

WRAS Approval Number  0810317

Print this entry

Range of commercial dishwashers having a solenoid valve (T&P) at the inlet discharging via a type `AB` air gap. Maximum operating pressure 4.0 bar. Note This appliance has a fluid 5 backflow prevention device built-in.

Size: ¾" BSP inlet.

Model: D35 BA, D36 BA, D40I ELT BA, D45 ELT BA, D85 ELT BA and D120 ELT BA.

Marking: Front casing badged manufacturers name and model number, data plate on side of appliance showing manufacturers name, model number, volts, CE Mark and serial number of appliance.

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer: Elframo Spa

Factor:  

WRAS Approval Number  1001028

Print this entry

Range of commercial dish washing machines controlled via a solenoid valve (Elbi) which discharges via a Type `AA`air gap arrangement. Maximum working pressure 4bar. Cold water inlet connection only.

Size: Supplied with either a stainless steel braided EPDM lined flexible hose assembly with ¾" captive nuts or a reinforced PVC flexible hose assembly with ¾" captive nuts.

Model: PROTECH 810, TOPTECH 820, PROTECH 710, PROTECH 610, TOPTECH 620.

Marking: Colged badge on front panel. Colged logo, model number and product information printed on adhesive label on side of panel, and model number printed on control panel.

Installation Requirements : R001           

Note: These appliances incorporate a FC 5 backflow prevention device.

Proviso:  

Manufacturer: Eurotec S.R.L - Divisione Colged

Factor:  

WRAS Approval Number  1103041

Print this entry

Range of hood type dishwashing machines. Flow is controlled by a solenoid valve which is fed via nylon braided flexible hose and discharges via a type `AB` airgap arrangement. Maximum working pressures 4 bar. Cold feed only.

Size: Nylon braided EPDM lined flexible hose assembly incorporating ¾” BSP captive nut end connections.

Model: CAP/SO Series: CAP10EBT, CAP12EBT, CAP15EBT, SO100EBT and SO120EBT. SH Series: SH55E, SH55EBT and SH120EBT.

Marking: Hoonved logo and model number on control panel.Hoonved logo, company details, model number and product information on side panel.

Installation Requirements : R001 .         

Note: This appliance incorporates a fluid category 5 backflow protection device.

Proviso:  

Manufacturer: Hoonved Srl

Factor:  

WRAS Approval Number  0909323

Print this entry

Range of under counter dishwashing machines having a solenoid valve (RPE) fitted to the cold water inlet to a Type `AB` air gap assembly which supplies water to the heater within the machine. Maximum supply pressure 4 bar.

Size: ¾” BSP (F) Inlet connection.

Model: 1342/ABS/…, 4Q/82 MONO/ABS/…, 4Q/82 TRI/ABS/…, 4Q/82/ABS/…, 4Q/82E/ABS/…, 4Q/82ECO/ABS/…, 4Q82/ABS/…, 4Q82E/ABS/…., 4SA/ABS/…, 4SB/ABS/…,4SC/ABS/…,824/ABS/…, 824X/ABS/…, 824S/ABS/…, CAR MAXI DP/ABS/…, CAR MAXI/ABS/…., CAR QUATTRO/ABS/…, CAR QUATTRO/S/ABS/…, CK50/ABS/…, CK50G/ABS/…., CK50GX/ABS/…., DP 824/ABS/…, DS 500/ABS/…, ELITE 500/ABS/…, ELITE 503/ABS/…, J 500/3/ABS/…, J500/3/ABS/…, J500/ABS/…, JOLLY 502/ABS/…., JOLLY 504/ABS/…., K 50E/ABS/…., K 50ET/ABS/…, K50/ABS/…, K50E/ABS/…, MAID2WASH 50/ABS/..., S/41 MA/ABS/…., S/42 MA/ABS/…., S/42 TA/ABS/…., S/55/ABS/…., S/60/ABS/…., U500 30/ABS/…., U500 30D/ABS/…., U500/ABS/…, 6 1P/ABS/…, 61P/ABS/…, 6 1PK/ABS/…, CAR MASTER/ABS/…, CK720/ABS/…, SEI 1P/ABS/…, SEI 1PK/ABS/…, SEI1PK/ABS/…, SIX1PA/ABS/…, W13/ABS/…., 6 2PS/ABS/…, 62P/S/ABS/…, SEI 2PSK/ABS/…, SIX2PA/ABS/…, W14/ABS/…., SEI 2P/S/ABS/…, 6 2P/ABS/…, 62P/ABS/…, SEI 2P/ABS/… & W15/ABS/….

Marking: Data plate on side of machine printed with IME srl, model number and maximum and minimum operating pressures.

Installation Requirements : r001 r150         

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: IME S.R.L.

Factor:  

WRAS Approval Number  0812089

Print this entry

`K-Tronic` and `B-Tronic` range of commercial dishwashing machines with two separate water supplies one feeding the final rinse via a strainer (AUK Muller) and solenoid valve (AUK Muller) and discharges through a type `AA` air gap arrangement through a float valve (AUK Muller). The other supply to the sump is via a strainer (AUK Muller), solenoid valve (AUK Muller) and discharges via an `AA` air gap arrangement providing fluid category 5 protection. Maximum working pressure 2.5 bar.

Size: ¾" BSP inlet.

Model: B & K Tronic range.K200 V/KV/VA/P/I/VP/VAP/CSSTop.K400 V/KV/VA/P/I/VP/VAP/CSSTop.Eco K200KA15B190 V/P/CSSTopB230 V/VA/VAP/CSSTop B350 V/VA/VAP/CSSTopB460 VA/VAP/CSSTop B580 VA/VAP/CSSTopB690 V/VA/VAP/CSSTop B810 VA/VAP/CSSTopBA VAT, BA VAP, BA VAS, BA HAT, BA HAS, BA G, BA B, BA C, BTA 160, BTA 240, BA133.

Marking: Model number and technical data printed on adhesive label on body. Meiko and Clean Controls printed on control panel. Meiko embossed into body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Meiko (UK) Ltd

Factor:  

WRAS Approval Number  1003337

Print this entry

Range of under counter dish washing machines having a solenoid valve (Invenseys) fitted to the cold water inlet which supplies water to the heater within the machine. The appliance has a commercial salt regenerated water softener built in. Maximum supply pressure 5.0 bar.

Size: ¾” BSP (F) inlet.

Model: Meiko ECO530 F-M EW10 Dishwasher.

Marking: Front panel badged MEIKO, ECOSTAR 530F DW. Data label on front panel bottom right-hand side corner showing Manufacturers Meiko, manufacturers address, Type, Serial number, DVGW, Voltage, KW rating of boiler, Boiler contents and year of manufacture.

Installation Requirements :             

Note: This appliance has a Fluid Category 3 backflow prevention device built in.

Proviso:  

Manufacturer:  

Factor: Meiko (UK) Ltd

WRAS Approval Number  1007340

Print this entry

Range of hood style dishwashing machine having a solenoid valve (Invensys) and fill hose (Codeflex) connected to a Type `AB` air gap assembly which supplies water to the heater within the machine. The machines incorporate commercial water softener after the air gap. Maximum supply pressure and temperature 5 bar and 82°C.

Size: ¾" BSP (M) inlet connection

Model: FV40.2 Active Under counter dishwashers FV60.2 Active Under counter Dishwasher DV80.2 Active Hood Dishwasher DV120.2 Active Hood Dishwasher DV125.2 Active Hood Dishwasher TopClean M. TopClean 60.

Marking: Meiko and model on front of machine. Meiko, model, serial number and technical information on adhesive label on side of machine.

Installation Requirements : R001           

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Meiko Maschinebau GmbH & Co KG

Factor: Meiko (UK) Ltd

WRAS Approval Number  1007341

Print this entry

Under counter dishwashing machine having a solenoid valve (Invensys) and fill hose (Codeflex) connected to a Type `AB` air gap assembly which supplies water to the heater within the machine. Maximum supply pressure and temperature 5 bar and 82°C.

Size: ¾" BSP (M) inlet connection

Model: FV & ECO range of commercial dishwashing machinesECO430, ECO530 & FV28 Gio, FV40.2 Gio, FV70.2, FV40.2M and FV60.2

Marking: Casing badged Meiko and model number. Data label on front casing showing manufacturers name and address, model number and serial number and other technical information.

Installation Requirements : R001           

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Meiko Maschinebau GmbH & Co KG

Factor: Meiko (UK) Ltd

WRAS Approval Number  1007342

Print this entry

Range of hood style dishwashing machine having a solenoid valve (Invensys) and fill hose (Codeflex) connected to a Type `AB` air gap assembly which supplies water to the heater within the machine. Maximum supply pressure and temperature 5 bar and 82°C.

Size: ¾" BSP (M) inlet connection

Model: DV, FV & ECO Range of commercial Hood dishwashersECO545D F-M, DV80.2, DV120.2, DV160.2, DV240.2, DV270.2, DV125.2, DV240B, DV270B, DV200.2, DV200.2PW, FV130.2 and FV250.2

Marking: Casing badged Meiko and model number. Data label on front casing showing manufacturers name and address, model number and serial number and other technical information.

Installation Requirements : R001           

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Meiko Maschinebau GmbH & Co KG

Factor: Meiko (UK) Ltd

WRAS Approval Number  1003338

Print this entry

Range of hood type dish washing machines having a solenoid valve (Invenseys) fitted to the cold water inlet which supplies water to the heater within the machine. The appliance has a commercial salt regenerated water softener built in and incorporates a double check valve. Maximum supply pressure 5 bar.

Size: ¾” BSP (F) inlet.

Model: Meiko ECO545D F-M EW10 Dishwasher

Marking: Front panel badged MEIKO, ECOSTAR 545 D. Data label on front panel bottom right-hand side corner showing Manufacturers Meiko, manufacturers address, Type, Serial number, DVGW, Voltage, KW rating of boiler, Boiler contents and year of manufacture.

Installation Requirements : R001           

Note: This appliance has a Fluid Category 3 backflow prevention device built in, for commercial premises FC4 protection must be installed upstream and for healthcare premises FC5 protection must be installed upstream of this appliance.

Proviso:  

Manufacturer: Meiko Maschinebau GmbH & Co Kg

Factor: Meiko (UK) Ltd

WRAS Approval Number  1012042

Print this entry

Hood type commercial dishwashing machine. Flow is controlled by a solenoid valve (Invensys) and discharges via a type `AB` airgap. Cold supply only. Maximum working pressure 6.0 bar.

Size: ¾” BSP female inlet.

Model: Type G 8072.

Marking: Miele professional and model number on control panel. Miele on hood. Miele, model and product information on adhesive label on side panel.

Installation Requirements : R001           

Note: This appliance incorporates a fluid category 5 backflow prevention device.

Proviso:  

Manufacturer: Miele GmbH

Factor: Miele Co Ltd

WRAS Approval Number  0903327

Print this entry

Range of under counter dishwashing machines having a solenoid valve (RPE SNC) fitted to the cold water inlet to a Type `AB` air gap assembly which supplies water to the heater within the machine. Maximum supply pressure 4.0 bar.

Size: ¾" BSP (F) Inlet connection.

Model: T40ABT, T50ABT, E50ABT, E80ABT And T120ABT.

Marking: Front casing badged UNICA. Adhesive label on side of machine showing model number and maximum and minimum operating pressures.

Installation Requirements : R001           

Note: This appliance has a fluid category 5 backflow prevention device built in.

Proviso:  

Manufacturer: Sisterma Project SRL

Factor: Project Distribution Ltd

WRAS Approval Number  1004045

Print this entry

Range of pass through and under counter commercial dishwashing machines fed via a flexible hose (Reflex SrL) solenoid valve (T&P) incorporating a flow restrictor and discharged via a type `AB` air gap arrangement. Minimum and maximum working pressures 0.7 and 4.0 bar respectively.

Size: Flexible reinforced PVC hose with ¾" BSP captive nut.

Model: SL-23BP, SL-550BP, SL-1100BP, SL-1200BP.

Marking: Sammic and Sammic logo badged on front panel.Sammic, model number and product information printed on adhesive label on body.Model number badged on lower front panel.

Installation Requirements : R001 R450         

Note:  

Proviso:  

Manufacturer: Sammic S.L.

Factor: