Section 2420

Print Entire Section

Water Coolers

Drinking

WRAS Approval Number  1304045

Print this entry

Free standing drinking water cooler incorporating a stainless steel tank and a plastic hot water tank. Flow is controlled via brass solenoid valves. Water is dispensed, cold and hot, by push button assemblies. Maximum working pressure 3.0 bar. Maximum operating temperature 77°C. Cold water supply only.

Size: 8mm pushfit inlet

Model: RIO23 H-C

Marking: Cosmetal, model and technical info on rear of body. Cosmetal on front of body.

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer: Cosmetal Srl

Factor:  

WRAS Approval Number  1210068

Print this entry

Range of ambient/cold water dispensing units where the flow is controlled by solenoid valve. The cold line incorporates a single check valve. The unit also incorporates a carbonated water supply. Maximum working pressure 3.0 bar. Cold water use only.

Size: ¾” BSP.

Model: Niagara 65 SL WG, Niagara 120 SL WG, Niagara & 180 SL WG. UV Niagara 65 SL WG, UV Niagara 120 SL WG & UV Niagara 180 SL WG. Niagara EC 65 SL WG, Niagara EC 120 SL WG, Niagara EC 180 SL WG, UV Niagara EC 65 SL WG, UV Niagara EC 120 SL WG, UV Niagara EC 180 SL WG, UV Niagara EC 65 WG & UV Niagara EC 120 WG. Niagara TOP 180 WG, UV Niagara TOP 65 WG, UV Niagara TOP 120 WG, UV Niagara TOP 180 WG, Niagara TOP EC 65 WG, Niagara TOP EC 120 WG, Niagara TOP EC 180 WG, UV Niagara TOP EC 65 WG, UV Niagara TOP EC 120 WG, UV Niagara TOP EC 180 WG & Niagara TOP 65 WG.

Marking: Cosmetal & Niagara on control panel. Cosmetal, model number & product information on back panel.

Installation Requirements : R001 R160         

Note:  

Proviso:  

Manufacturer: Cosmetal Srl

Factor:  

WRAS Approval Number  1205375

Print this entry

Range of water dispensing machines machine having a float operated valve at the inlet and draw off tap at the outlet. Maximum working pressure 1.0 bar. Cold water supply only.

Size: ¼ “ Pushfit

Model: WCD-2C & WCD 2TC (cold and ambient). ,

Marking: Winix on front of machine. Data Label on side of machine.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Winix Inc

Factor:  

WRAS Approval Number  1203358

Print this entry

Table top water cooler machine having a float operated valve at the inlet and solenoid valve at the outlet. Maximum supply pressure 1.0 bar. For cold water use only

Size: 9mm Pushfit

Model: WCD-4C

Marking: Front of machine printed Winix.

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer: Winix Inc

Factor:  

WRAS Approval Number  1304044

Print this entry

Free standing drinking water cooler incorporating a stainless steel tank. The flow is controlled by brass solenoid valves. Water is dispensed, cold and ambient, by push button assemblies. Maximum working pressure 3.0 bar. Cold water supply only.

Size: 8mm pushfit inlet

Model: RIO 23A-C

Marking: Cosmetal, model and technical info on rear of body. Cosmetal on front of body.

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer: Cosmetal Srl

Factor:  

WRAS Approval Number  1210069

Print this entry

Range of ambient/cold water dispensing units where the flow is controlled by solenoid valve. The cold line incorporates a single check valve. Maximum working pressure 3.0 bar. Cold water use only.

Size: ¾” BSP.

Model: Niagara 65 SL, Niagara 120 SL & Niagara 180 SL. UV Niagara 65 SL, UV Niagara 120 SL & UV Niagara 180 SL. Niagara EC 65 SL, Niagara EC 120 SL, Niagara EC 180 SL, UV Niagara EC 65 SL, UV Niagara EC 120 SL, UV Niagara EC 180 SL, UV Niagara EC 65 & UV Niagara EC 120. Niagara TOP 180, UV Niagara TOP 65, UV Niagara TOP 120, UV Niagara TOP 180, Niagara TOP EC 65, Niagara TOP EC 120, Niagara TOP EC 180, UV Niagara TOP EC 65, UV Niagara TOP EC 120, UV Niagara TOP EC 180 & Niagara TOP 65.

Marking: Cosmetal & Niagara on control panel. Cosmetal, model number & product information on back panel.

Installation Requirements : R001 R160         

Note:  

Proviso:  

Manufacturer: Cosmetal Srl

Factor:  

WRAS Approval Number  1301078

Print this entry

`Connect` range of free standing drinking water coolers. Incorporates a stainless steel tank and the flow is controlled by a float operated valve inside the tank. Units incorporate a plastic hot water tank which is gravity fed from the stainless steel tank. Water is dispensed via a self-closing assembly with push button operation. Maximum operating pressure 3.0 bar. (Cold supply only)

Size: 8mm pushfit inlet

Model: Connect 23 H RI & UV Connect 23 H RI

Marking: Company name, model and technical info on rear body. Company name on front body.

Installation Requirements : R001 R150         

Note: Cold supply only

Proviso:  

Manufacturer: Cosmetal Srl

Factor:  

WRAS Approval Number  1301077

Print this entry

`Connect` range of free standing drinking water coolers. Incorporates a stainless steel tank and the flow is controlled by a float operated valve inside the tank. Water is dispensed via a self-closing assembly with push button operation. Maximum operating pressure 3.0 bar. Cold supply only

Size: 8mm pushfit inlet

Model: Connect 23 A RI, UV Connect 23 A RI

Marking: Company name, model and technical info on rear body. Company name on front body.

Installation Requirements : R001 R150         

Note: Cold supply only.

Proviso:  

Manufacturer: Cosmetal Srl

Factor:  

WRAS Approval Number  0903038

Print this entry

Range of hot/cold and ambient/cold water dispensing units which are fed via a float valve. The water is dispensed via two push button assemblies controlling a solenoid valve. Maximum working pressure 5.0 bar.

Size: ¼" CDPE Inlet.

Model: WCBC4400X, WCBH440X, WCBTC440X, WCBTH4400X,WCPC4400X, WCPH4400X, WCPTC4400X, WCPTH4400X.

Marking: Model number printed on front panel.AA first and technical data printed on adhesive label on side panel.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Wonbong Co Ltd

Factor: AA First Ltd T/A Circon Ltd

WRAS Approval Number  1004055

Print this entry

`Borg & Overstrom Classic` range of hot and cold or cold and ambient water dispensing units fed via a float valve. The water is dispensed via two plastic self closing taps. Maximum working pressure 3.5 bar.

Size: ¼” pushfit inlet.

Model: Borg & Overstrom Classic 628. Borg & Overstrom Classic 698. Borg & Overstrom Classic 628H. Borg & Overstrom Classic 698H.

Marking: Borg & Overstrom printed onto front panel, serial, model number and technical data printed on adhesive label attached to back panel.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Azure UK

WRAS Approval Number  0906033

Print this entry

`Fontemagna Compact` drinking water cooler with direct chill. The unit incorporate push fittings (John Guest), stainless steel coil, pump (Rotaflow), Filters (Everpure) and solenoid valves (RPE). Maximum working pressure 3.0 bar.

Size: 8mm tube inlet.

Model: Fontemagna Compact.

Marking: Fontemagna Blupara and Blupura logo printed onto body.

Installation Requirements : R001 R150 R510       

Note:  

Proviso:  

Manufacturer: Blupura Srl

Factor:  

WRAS Approval Number  1001026

Print this entry

`Jet` range of water coolers, flow controlled via normally closed solenoid valves (RPE) with stainless steel storage tanks and coil, stainless steel tap spout and nitrile gaskets. Some models also incorporate carbonating units with these models check valve cartridges (Neoperl) are incorporated. Maximum working pressure 3.0 bar.

Size: 8mm BSP inlet.

Model: JET30A, JET30H, UVJET30A, UVJET30H, JET45A, JET45H, UVJET45A, UVJET45H, JETIN30A, JETIN30H, JETIN45A, JETIN45H, VR3000A, VR3000H, SUPERCHILL 30B & CTDWC30.

Marking: `Cosmetal` printed on control panel. `Cosmetal` and product information printed on adhesive label on rear of body.

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer: Cosmetal Srl

Factor:  

WRAS Approval Number  0912320

Print this entry

`Cascade` floor standing water cooler with stainless steel chillers tanks, LLDPE tubing and plastic pushfit fittings (DMT & John Guest ). The water is dispensed by two push button self closing assemblies. Maximum working pressure 5.5 bar.

Size: 6mm inlet connections.

Model: CASCADE.

Marking: Crystal Mountain badge on front of casing, Crystal Mountain data label on rear panel.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Crystal Mountain Products Ltd

Factor:  

WRAS Approval Number  1009374

Print this entry

Floor standing, chilled water dispenser with stainless steel chiller, PE tubing and plastic pushfit fittings. The water is dispensed by a push button assembly. Maximum working pressure 3.0 bar. For use with cold water only.

Size: ¼" push fit inlet connection

Model: Aqua Pointe: P10BFY

Marking: Aqua Pointe Oasis badge on front casing. Model number and serial number on rear casing.

Installation Requirements : R001 R150         

Note: For cold water use only.

Proviso:  

Manufacturer: Oasis East Sp z o o

Factor:  

WRAS Approval Number  1004334

Print this entry

`KALIX’ floor standing water dispenser with stainless steel chiller, stainless steel heater, PE tubing and plastic pushfit fittings (John Guest). The water is dispensed by 4 push button assemblies. Maximum working pressure 3 bar.

Size: 6 mm push fit connection.

Model: KALIX hot & cold P1PVHSY, P1PVCDHSY (with cup dispenser) KALIX tri-temp P1PVHSKY, P1PVCDHSKY (with cup dispenser) KALIX cook and cold P1PVKY (without cup dispenser) KALIX cook and cold P1PVCDKY (with cup dispenser)

Marking: Front casing badged OASIS and data label on back of appliance showing model number and serial number.

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer: OASIS East Sp z o o

Factor:  

WRAS Approval Number  0903040

Print this entry

Range of point of use water coolers fed via a solenoid valve controlling the flow. The water is dispensed via two push button assemblies. Maximum working pressure 6.90 bar.

Size: ¼" LLDPE inlet pipe.

Model: Interpure 1 Model IIP1UNF. Interpure 2 Model IP2UNF& IP2NNF.

Marking: Interpure printed on control panel. Manufacturers name, product information and model number printed on adhesive label on back panel.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Enstar Corporation

Factor: Pure Health Solutions, Inc

WRAS Approval Number  1007060

Print this entry

Range of “T6 Family” and “T6 Primo” hot and cold water dispensing units fed via a solenoid valve (R.P.E). Maximum working pressure 6.0 bar & maximum working temperature 98°C.

Size: ¾” male BSP inlet.

Model: “T6 Family” and “T6 Primo”.

Marking: T6 Family:Strauss, Strauss logo, company details, model number and product information printed on adhesive label on body.Tami bar printed onto control panel.Tana Water printed onto door.T6 Primo:Strauss, Strauss logo, company details, model number and product information printed on adhesive label on body.Tami printed onto lid.Tami and logo moulded into side panel.

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer: Strauss Water Ltd

Factor:  

WRAS Approval Number  1107091

Print this entry

Range of boiling and chilled under counter water dispensing units. Water is fed via solenoid valves and discharges via a push button operated tap. These appliances incorporate fluid category 3 backflow protection. Maximum working pressure 7.0 bar. Maximum working temperatures 98°C - boiling unit, 10°C - chilled unit.

Size: Stainless steel braided PEX lined flexible hose assemblies with ½” BSP captive nut connections.

Model: Boiling units B 150F, B 100F, B160F, B200F, DOMBC2, DOMBA1 & DOMHB1 Chilled units C125 Boiling & chilled units BC 60/85, BC 100/125 & BC 150/175, BC 200/175+, BC 160/125+, BC 160/125+IT, BC 200/175+IT, BC 160/125+IS & BC 200/175+IS.

Marking: Zip logo on front panel. Zip logo, hydrotap on control panel. Zip logo, contact details on top panel. Model number, product information inside front panel.

Installation Requirements : R001 R170         

Note: Cold water supply only.

Proviso: All connection hoses to be installed where light is excluded.

Manufacturer: Zip Heaters

Factor: Zip Heaters (UK) Ltd.

WRAS Approval Number  0809041

Print this entry

Wall fountain drinking water chiller for recessed installation in a suitable wall incorporating filter assemblies (Cuno) and a spring loaded lever operated tap (Touch Flo). Maximum working pressure 7.0 bar.

Size: 15mm pushfit.

Model: CH104.

Marking: Chilltap, model number, product information and company details printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Zip Heaters (UK) Ltd.

Factor:  

WRAS Approval Number  0809040

Print this entry

`Chilltap` undersink drinking water chiller incorporating a spring loaded lever operated tap (Touch Flo) and Cuno filters on the inlet. The unit should be mounted in a position where light is excluded and/or the supplied thermal pipe insulation should be used to exclude light. Maximum working pressure 7.0 bar.

Size: ¼" push-fit.

Model: CH103.

Marking: `Chilltap`, model number and product information printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Zip Heaters (UK) Ltd.

Factor:  

WRAS Approval Number  0809039

Print this entry

`Chillmaster` range of wall mounted or free standing drinking water chillers incorporating spring loaded lever operated tap (Touch Flo) and Cuno filters on the inlet. Maximum working pressure 7.0 bar. Cold water use only.

Size: 15mm push-fit inlet connection.

Model: Wall mounted CH102, free standing CH101.

Marking: `Zip` badged on outlet tap.`Zip Chillmaster` printed on body.`Chillmaster`, model number and product information printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Zip Heaters (UK) Ltd.

Factor: