Water Fittings Directory

WRAS Approved Water Fittings

 

Section 2450

Print Entire Section

Water softeners

 

Domestic

 


 

WRAS Approval Number  1305040

            

Print this entry

Ion exchange water softeners (salt regenerated) for domestic use. Operation is by two ion exchange resin filled pressure vessels with integral salt cabinet and manual regeneration control. Cold water use only Maximum working pressure 8.27 bar.

Size: ¾” male BSP inlet/outlet.

Model: 2020c (HE), 2020c (HF).

Marking: Kinetico, water systems, 2020c on case, Kinetico, operating info, model & serial number on inner case. Kinetico, brine rinse/backwash, US patent number, made in USA & flow arrow on body.

Installation Requirements : R001 R150 R170 R290 R420   

Note:  

Proviso: Discharge to drain must be via a type `AA`, `AB` or `AD` airgap in accordance with EN1717.

Manufacturer:  

List all fittings by this manufacturer

Factor: Kinetico UK Ltd

List all fittings by this factor

WRAS Approval Number  1206061

            

Print this entry

Continuous soft water, ion exchange water softener (salt regenerated) for domestic use. Operation is by an ion exchange resin filed plastic pressure vessel with integral salt cabinet and timer/manual regeneration control. Flow is controlled by a solenoid valve. The appliance is supplied with flexible hoses and also incorporates two single check valve cartridges used for the function of the appliance (not tested or use for backflow protection). Maximum working pressures 8.0 bar. Cold water use only

Size: Stainless steel braided EPDM lined flexible hose assemblies with ¾” BSP captive nuts.

Model: ES.

Marking: Model and product information on cover

Installation Requirements : R001 R150 R170 R290     

Note:  

Proviso: Discharge to drain must be via a type `AA` or `AB` air gap. Not supplied.

Manufacturer: Harvey Softeners Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

WRAS Approval Number  1206060

            

Print this entry

Continuous soft water, ion exchange water softener (salt regenerated) for domestic use. Operation is by two ion exchange resin filled plastic pressure vessels with integral block salt cabinets and manual regeneration control. The appliance is supplied with flexible hoses and also incorporates two single check valve cartridges used for the function of the appliance (not tested or use for backflow protection). Maximum working pressures 8.0 bar. Cold water use only

Size: Stainless steel braided EPDM lined flexible hose assemblies with ¾” BSP captive nuts.

Model: H20/25.

Marking: Model and product information on `figure eight` cap.

Installation Requirements : R001 R150 R170 R290     

Note:  

Proviso: Discharge to drain must be via a type `AA` or `AB` air gap. The single check valve must be installed upstream of the inlet connection.

Manufacturer: Harvey Softeners Ltd

List all fittings by this manufacturer

Factor:  

List all fittings by this factor

Hit Counter