Water Fittings and Materials Directory 

Copyright Water Regulations Advisory Scheme 2006

Section 2360

Washing Machines


Bedpan and disinfecting

Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

 

WRAS Approval Number: 0909075

Installation Requirements: R001               

Range of free standing bed pan/commode pot washing/disinfecting machines. Flow is controlled by a float operated valve and discharged via a type `AB` Airgap arrangement. Maximum working temperature 92ºC.

Size: ½” BSP inlet.

ModelJLA JET BP1, JLA JET BP2 & JLA JET BP3.

Marking: `JLA JET`, model and product information on lid.

Note: This appliance incorporates a Fluid Category 5 backflow prevention device.

Proviso:  

Manufacturer:  

Factor: JLA Ltd 

 

WRAS Approval Number: 1207338

Installation Requirements:                 

Bed pan washing and disinfection machine. Flow is controlled via a solenoid valve and discharges via a type `AA` airgap arrangement. Maximum working pressure 5.0 bar & maximum supply temperature 60ºC.

Size: ¾ BSP (M) inlet connections

ModelMEIKO TOPIC 10 MEIKO TOPIC 20 MEIKO TOPIC 40 MEIKO TOPIC 40 E10 = wall mounting model20 = floor mounted model40 = cabinet model40E = small cabinet model

Marking: Front casing badged MEIKO TOPIC. Data label at the base of front casing stating MEIKO TOPIC and serial number. Data label inside of top door stating manufacturers name, Type and serial number.

Note:  

Proviso:  

Manufacturer: Meiko Maschinebau GmbH & Co KG

Factor:   

 

WRAS Approval Number: 1205387

Installation Requirements: R001               

Steam sterilisers incorporating a break cistern with `AB` air gap via a float operated valve. Maximum working pressure 10 bar. Cold water use only.

Size: ¾” BSP (F) captive nut

ModelPS1201B and PS1202B

Marking: Miele Professional and model number on front cover. Manufacturers name, serial number and reference number on front control panel.

Note: This appliance incorporates a Fluid Category 5 backflow prevention device.

Proviso:  

Manufacturer: Miele Werk Buermoos GmbH

Factor: Miele Co Ltd 

 

WRAS Approval Number: 1106341

Installation Requirements: R001               

Bed pan washing and disinfection machine. Flow is controlled via a solenoid valve and discharges via a type `AA` airgap arrangement. Maximum working pressure 3.0 bar & maximum supply temperature 60ºC.

Size: ½” BSP (F) Captive nut

ModelTornado

Marking: Arjo Tornado on front. Model number, maximum working pressures and maximum working temperature on label.

Note:  

Proviso:  

Manufacturer: Getinge Disinfection AB

Factor: Arjo Hospital Equipment AB  

 

WRAS Approval Number: 1109412

Installation Requirements: R001               

Range of bed pan washing machines. Flow is controlled via a solenoid valve and discharges via a type `AA` airgap arrangement. Maximum working pressure 3.0 bar & maximum operating temperature 60°C.

Size:  ½” BSP (F) Captive nut

ModelFD1600, FD1610, FD1800 & FD1810 (free standing). FD1605 & FD1615 (under counter).

Marking: Getinge badge on front panel. Getinge, Model number, maximum working pressures and maximum working temperature on data label inside casing.

Note:  

Proviso: Inlet hoses to be installed where light is excluded

Manufacturer: Getinge Disinfection AB

Factor:   

 

WRAS Approval Number: 1007051

Installation Requirements: R001               

`Topic` range of bed pan washing machines. Flow is controlled via a solenoid valve (A&K Muller) and discharges via a type `AA` airgap arrangement, which incorporates an aerator at the outlet (Neoperl). The appliances also incorporate a strainer at the inlet (A&K Muller). Maximum working pressure 6.0 bar.

Size: ¾” BSP male inlets.

ModelMeiko topic 10.2, 20.2 & 40.2.

Marking: Topic, Meiko, Meiko logo printed on control panel.Meiko, Meiko logo, model number, and product information printed on adhesive label on front panel and inside door.

Note: These appliances incorporate a Fluid category 5 backflow prevention device.

Proviso:  

Manufacturer: Meiko Maschinebau GMBH

Factor: Meiko (UK) Ltd 

 

WRAS Approval Number: 1111099

Installation Requirements: R001               

`Meiko TopLine` range of bedpan washing machines. Flow is controlled by two normally closed solenoid valves incorporating a dirt trap arrangement with stainless steel strainers, and plastic flow regulators and discharges via a type `AA` air gap. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Size: ¾” BSP male inlets.

ModelMeiko TopLine 10 (Wall mounted). Meiko TopLine 20 (Floor standing). Meiko TopLine 30 (Wall installation). Meiko TopLine 40 (Cabinet installation).

Marking: Meiko, TopLine on control panel.Meiko, model number, company details product information on servicing hatch.

Note: These appliances incorporate a Fluid Category 5 backflow prevention device.

Proviso:  

Manufacturer: Meiko Maschinebau GmbH & Co KG

Factor:   

 

WRAS Approval Number: 0909049

Installation Requirements: R001               

`Compact Superior` range of free standing Bed Pan/Commode Pot Washing/Disinfecting Machines. Flow is controlled by a float operated valve (Opella) and discharged via a type `AB` Airgap arrangement. Maximum working temperature 92ºC.

Size: ½" BSP inlet.

ModelCompact Superior range: CS1 ST, CS2 ST, CS3 ST, CS1 HD, CS2 HD & Slimline.

Marking: Stanbridge & model printed on front panel.

Note: This appliance incorporates a fluid Category 5 backflow prevention device.

Proviso:  

Manufacturer: Stanbridge Ltd

Factor: