WRAS Approved Materials


 

Section: 5010   View Entire Section

WRAS Approval Number: 1111521

Schulaform - (POM)9 with grey masterbatch EV 32145. Light grey coloured, injection moulded acetal component. For use with water up to 23°C.

Supplier: Rosa Europe Sp. z o. o.


WRAS Approved Materials


 

Section: 5010   View Entire Section

WRAS Approval Number: 0903515

Injection moulded components manufactured from Iupital F10 and F20. Both grades are available in the following colours: natural, PMB Black (MU02-090677), PMB Blue (MX8-15840), PMB Red (MX5-18198) and PMB Yellow (MX6-15838). For hot and cold water use up to 60°C.

Supplier: Atlantic Plastics Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 1002514

Tenac C4590 & Tenac C HC490. White coloured, injection moulded acetal material. For use with hot and cold water up to 85°C.

Supplier: Asahi Kasei Plastics Europe S.A./N.V.


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0706535

Ultraform translucent grades - N2320 003, H2320 004, W2320 003, S2320 003, H4320, H2320 006 and N2200 G53. Ultraform black S2320 003 black 00120. For cold water and hot water use up to 85°C.

Supplier: BASF Aktiengesellschaft


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0801524

Ultraform H4320 Black 120. Black coloured acetal material. For use with hot and cold water up to 85°C.

Supplier: BASF Aktiengesellschaft


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0804517

Delrin 150 NC010 and Delrin FG150 NC010 (alternative trade names). White acetal. For cold water use only.

Supplier: DuPont (UK) Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 1108500

Delrin FG100 NC010. White coloured, injection moulded opaque acetal material. For use with water up to 23°C.

Supplier: DuPont (UK) Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 1002519

Delrin grades. 100P NC010, 100P BK602, 500P NC010, 500P BK602, 900P NC010 and 900P BK602. Black and natural coloured, injection moulded acetal material. For cold water use only.

Supplier: DuPont (UK) Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0804526

Delrin, injection moulded acetal material. The following grades are approved: Natural coloured - 111P NC010, 311DP NC010, 511P NC010, 911P NC010, FG511P NC010. Black coloured - 111P BK402, 311DP BK402, 511P BK402 & 911P 602. For use with hot and cold-water up to 85°C.

Supplier: DuPont (UK) Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0806514

Delrin FG150XV NC010. White coloured acetal material. For use with hot and cold water up to 85°C.

Supplier: DuPont (UK) Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0905519

Formocon FM090. White opaque, injection moulded polyacetal. For hot and cold water use up to 85°C.

Supplier: Formosa Plastics Corporation


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0806502

Acetal Material, Kepital F10-02, F20-03, F25-03, F25-03H, F30-03, F40-03 Natural, F20-03BK Black, F10-01, F20-03BBK, MB-S115F. For cold and hot water use up to 85°C.

Supplier: Korea Engineering Plastics Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0910521

Kepital F10 - 03H Natural, Kepital F10-03H BBK (black coloured) and Kepital F10-03H BK (black coloured). Injection moulded polyacetal material.For use with hot and cold water up to 85°C.

Supplier: Korea Engineering Plastics Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 1005510

Iupital F10-02 nat & Iupital F20-03 nat. White coloured, injection moulded acetal material. Iupital F10-02 E9000 black & Iupital F20-03 E9001 black. Black coloured, injection moulded acetal material. Iupital FG2025 nat. White coloured, injection moulded acetal material with 25% glass fibre. Iupital F20-03 Ral 3005. Maroon coloured, injection moulded acetal material. All above Iupital grades are suitable for use with hot and cold water up to 85°C.

Supplier: Plastribution Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0904502

Duracon GH25 WK3500. Translucent off-white injection moulded acetal material. Suitable for use with hot and cold water up to 85°C

Supplier: Polyplastics Co Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0710520

Duracon M90-44 WK2001, M90S CF2001, M270-44 WK2001, M270S CF2001, M25-44 CF2001. Translucent white acetal material. Duracon M90S CD3069 black acetal material. For cold water and hot water use up to 85°C.

Supplier: Polyplastics Co Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0804504

Celcon M90, M270 & M25. Translucent white coloured POM. For cold and hot water use up to 85°C.

Supplier: Polyplastics Co Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 1004502

Tepcon M90Nat CF2001 and Tepcon M270Nat CF2001. White coloured, injection mouled acetal material. For use with hot and cold water up to 85°C.

Supplier: Polyplastics Taiwan Co Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0908513

Resinex POM C9N. Natural and black coloured, injection moulded acetal copolymer material. For hot and cold water use up to 85°C.

Supplier: Resinex UK Ltd.


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0806511

Acetal Material, Sniatal M2, M4, M5, and M6. For cold and hot water use up to 85°C.

Supplier: Rhodia Polyamide Engineering Plastics


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 1012508

Hostaform. Injection moulded, acetal material available in the following colours: White 20-5690 Grey 30-6096 Brown 65 White 20-3352 Grey 33 Green 76 White 50-5692 Grey 30-5693 Lime Green 70-6186 White 22 Grey 36 Olive Green 70-6195 Ivory 20-5691 Grey 39 Dark Green 70-5810 Beige 63 Red 46 Blue 87 Yellow 56 Red 47 Dark Blue 80-2970 Black 10-5358 Red (RAL3005) 40-5818 Light Blue 80-5504 Lilac 40-6193 Orange 40-3738 Pink 40-6187 Black 14 Black 10/1570 For use with hot and cold water up to 85°C.

Supplier: Ticona UK Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 1012507

Hostaform & Celcon/Kematal acetal material intended for injection moulding. The following grades are natural in colour (unless otherwise stated) and are for use with water up to 85°C. Hostaform: M90JG (also available in black 10/5659, grey 30/5660, grey 30/5661, white 20/5644 & blue 80/5656). Kematal M90-14* (also available in White 02100*, White 10350* & Black 92800*). Celcon M90 Black (NS) & CD3068 (black coloured). Grades marked with a `*` will not be renewed in 2015.

Supplier: Ticona UK Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0805501

Celcon/Kematal grades. M25, M50, M90, M140, M270, white coloured translucent acetal co-polymer. M90-14 and MC90-HM, cream coloured translucent acetal co-polymer. GB25, light grey coloured translucent acetal co-polymer. For use with hot and cold water up to 85°C.

Supplier: Ticona UK Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 1012506

Hostaform acetal material intended for injection moulding. The following grades are natural in colour (unless otherwise stated) and are for use with water up to 85°C. Hostaform Unfilled Grades: T1020, M15HP, C2521, C9021, C13021, C13031 & C27021. Hostaform Glass Fibre Filled Grades: C9021 GV1/10, C9021 GV1/20, C9021 GV1/30 & C9021 GV1/30 3134. Hostaform Glass Bead Filled Grades: C9021 GV3/10, C9021 GV3/20 & C9021 GV3/30. Hostaform Lubricated Grades: C9021 M (Natural colour is grey), C9021 FCT1, C9021 TF, C9021 K & C13021RM. Hostaform Special Grades: MR130ACS, C13031 XAS-G, M25AE, M25AE 10-2013 (black coloured) & M30AE. Hostaform Impact Modified Grades: S9063* & S9064*. Grades marked with a `*` will not be renewed in 2015.

Supplier: Ticona UK Ltd


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 0908537

UP POM 9. Natural and black coloured, injection moulded acetal copolymer material. For hot and cold water use up to 85°C.

Supplier: Ultrapolymers


WRAS Approved Materials


 

Section: 5015   View Entire Section

WRAS Approval Number: 1109514

Tarnoform 300, 400 and 500. White coloured POM material for injection moulding. For use with water up to 60°C.

Supplier: Zaklady Azotowe Tarnowie


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 1111506

Lustran ABS Tubing. Grey coloured, extruded ABS pipe. For use with water up to 23°C.

Supplier: Xylem


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 1201506

Novodur P2L Black. Black coloured injection moulded ABS component. For use with water up to 23°C.

Supplier: Black & Veatch Ltd


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0910518

Terluran HI-10 natural. Natural coloured, injection moulded, ABS material. For hot and cold water use up to 85 °C.

Supplier: BASF Aktiengesellschaft


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0910517

Terluran GP-22 natural. Natural coloured, injection moulded, ABS material. For hot and cold water use up to 85°C.

Supplier: BASF Aktiengesellschaft


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0910538

Terluran GP-35 Natural. Natural coloured ABS material for injection moulding. For use with hot and cold water up to 85°C.

Supplier: BASF SE


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 1105529

Biocote. Cream coloured, injection moulded copolymer ABS material. For use with water up to 85°C

Supplier: Biocote Ltd


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 1110521

ABS-1 Fittings. Cream coloured, injection moulded ABS fittings. For use with water up to 85°C.

Supplier: Cixi New Jiaye Sanitary Ware Co. Ltd.


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 1009531

Comer range of ABS fittings and valve components. Light grey coloured, injection moulded components manufactured from ABS. For use with water up to 23°C.

Supplier: Comer Spa


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0903512

Toyolac 700-314 Natural. Translucent cream ABS material. Suitable for hot and cold water use up to 65°C

Supplier: Distrupol Ltd


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0708505

Durapipe ABS Type S. Used to manufacture pipe, fittings and valves. Cold water use only.

Supplier: Durapipe UK


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0902521

Durapipe ABS Type S. Grey coloured pipe, fittings and valves. Cold water use only.

Supplier: Durapipe UK


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0705506

Durapipe ABS grey cloured pipe and socket. Cold water use only.

Supplier: Durapipe UK


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0908528

George Fischer ABS Grey Type S. Grey coloured, ABS fittings (injection moulded) and pipe (extruded). For use with cold water only.

Supplier: George Fischer Sales Ltd


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0807516

+GF +ABS Cycolac X399. Grey coloured, ABS pipe, fittings and valves. For cold water use only.

Supplier: George Fischer Sales Ltd


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0810529

Novodur P2MC 000000. Cream coloured ABS material. For hot and cold water use up to 85°C

Supplier: Ineos ABS (Spain) SL


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0810528

Novodur P2L-AT 012424. White coloured ABS material. For hot and cold water use up to 85°C

Supplier: Ineos ABS (Spain) SL


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0701517

Percom ABS75X, ABS 75. Light grey coloured ABS material. Cold water use only.

Supplier: JGP Perrite (Warrington)


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0712504

ABS 609 white 2097P. Off white coloured ABS. For use with hot and cold water up to 85°C.

Supplier: JGP Perrite (Warrington)


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0910527

ABS MX1 natural, ABS MX1 white, and ABS MX1 grey. Injection moulded ABS material. For hot and cold water use up to 65°C. ABS MX1 blue. Injection moulded ABS material. For use with water up to 60°C.

Supplier: MX Group


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0808527

Polylac PA 727 White CM1404. White coloured ABS material. For use with hot and cold water up to 85°C. Polylac PA 727 Grey CM1405. Grey coloured ABS material. For use with hot and cold water up to 85°C.

Supplier: Plastribution Ltd


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0810525

Abscom-S135 White 1125, 350 White 1125, S105 White 1216, F350 Blue 7117, S105 Natural 0001, SE180 Grey 2413 (to RAL 7038) & S105 Grey 2405 (Grey 1), S105 Grey 2406 (Grey 2). ABS injection moulding compounds. For hot and cold water use up to 85°C.

Supplier: Polymer Compounders Ltd


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0707517

Polylac PA 709-5. ABS dark grey pipe. For cold water use only.

Supplier: Polypipe Building Products Ltd


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 1009555

Range of Polyplumb (grey coloured) and Polyfit (white coloured) injection moulded, acetal fittings. For use with water up to 65°C.

Supplier: Polypipe Building Products Ltd


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0910537

`Effast` ABS pipe and fittings. Grey coloured, extruded pipe manufactured from Polylac PA 709S, and grey coloured, injection moulded fittings manufactured from Polylac PA 709 NAT grey. For cold water use only.

Supplier: Polypipe Terrain


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0901507

Cycolac X399. Grey coloured, glass filled ABS material. For use with cold water only.

Supplier: SABIC Innovative Plastics BV


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0907520

TP Tecnoplastic ABS (PA709S). Grey coloured ABS material for extrusion. For use with cold water only.

Supplier: TP Tecno Plastics


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 0806512

TIPO 3000 2095 A. Grey coloured ABS pipe fitting. For use with cold-water only.

Supplier: TP Tecno Plastics


WRAS Approved Materials


 

Section: 5020   View Entire Section

WRAS Approval Number: 1005517

ABS 727 available in natural, grey and white colours. Injection moulded ABS material. For use with water up to 85°C.

Supplier: Xiamen Solex High-Tech Industries Co. Ltd


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 1007519

Endolac 245.10. Black coloured, factory applied bituminous paint. For use with water up to 50°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water - e.g. taps, valves and pipe connectors.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 0809522

Endolac 245-30 FGC. Black coloured factory applied bituminous coating. For use with hot and cold water up to 50°C. Approved for use on applications such as taps, valves and pipe connectors only. NOT for use on large water retaining structures.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 1108502

Deep High Build Liquid Bitumen Paint. Black coloured, factory applied bituminous coating. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Supplier: Deep Industries


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 1008539

Kubotaseal BM. Factory applied, black coloured asphaltic bituminous coating. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Supplier: Kubota Corporation


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 1008540

Kubotacoat BM. Factory applied, black coloured asphaltic bituminous coating. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Supplier: Kubota Corporation


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 1008541

Bitumen Sealcoat 810. Factory applied, black coloured asphaltic bituminous coating. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Supplier: Kubota Corporation


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 1109530

Inertol BS10. Factory applied, black coloured bitumen coating. Apply as per manufacturer`s instructions. Cure for 30 minutes at 50-60°C or 5 hours at 23°C. For use with water up to 60°C.

Supplier: Mader Aqualack AG


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 1007515

Intertol BS 10 FR. Black coloured, factory applied bituminous coating. For use with water up to 23°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water - e.g. taps, valves and pipe connectors.

Supplier: Mader Aqualack AG


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 1002523

Nav-Coat Bitumen Paint 001. Black coloured paint for use with cold water only. Not approved for use on water-retaining structures with large surface to volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water.

Supplier: Nav Durga Chromatics Private Limited


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 0811532

PCBIT 111 HT. Black coloured bitumen based coating. Cure as per manufacturer`s instructions. Suitable for hot and cold water use up to 60°C. Not approved for use on water-retaining structures with large surface to volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water. Approved for use on applications such as taps, valves and pipe connectors only.

Supplier: P C Chanda & Company (P) Ltd


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 0910525

PCBIT 111. Black coloured, ready mixed, air drying synthetic resin based coating. For cold water use only. Not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water - e.g. taps, valves and pipe connectors.

Supplier: P C Chanda & Company (P) Ltd


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 1105505

Endolac 245-30 FGC. Black coloured, factory applied bituminous paint. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. This material is not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks, but may be acceptable for use where there is only a small surface area in contact with the water - e.g. taps, valves and pipe connectors.

Supplier: Saint Gobain PaM


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 0902528

Inertol BS 10. Black coloured bituminous coating. Apply as per manufacturer`s instructions. Cure at 90°C - 100°C for one hour. For hot and cold water use up to 60°C. Approved for use on applications such as taps, valves and pipe connectors only. Not for use on large water retaining structures.

Supplier: Samsun Makina Sanayi A.S.


WRAS Approved Materials


 

Section: 5021   View Entire Section

WRAS Approval Number: 1105537

Shalitol Black High Build Bitumen Coating. Factory applied, black coloured bitumen coating. For use with water up to 23°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water - e.g. taps, valves and pipe connectors.

Supplier: Shalimar Paints Ltd.


WRAS Approved Materials


 

Section: 5022   View Entire Section

WRAS Approval Number: 1007502

8176. Grey coloured resin impregnated carbon graphite material. For use with water up to 85°C.

Supplier: John Crane UK Ltd


WRAS Approved Materials


 

Section: 5022   View Entire Section

WRAS Approval Number: 0711525

Hard Carbon CUG-KM. Dark grey coloured mechanical seal ring for water pumps. For hot and cold water use up to 85°C

Supplier: Meccanotecnica Umbra Spa


WRAS Approved Materials


 

Section: 5022   View Entire Section

WRAS Approval Number: 1003507

P5600 (phenolic resin impregnated) & P8412 (epoxy resin impregnated). Grey black coloured carbon graphite. For use with hot and cold water up to 85°C.

Supplier: Morgan AM & T (UK)


WRAS Approved Materials


 

Section: 5022   View Entire Section

WRAS Approval Number: 1003508

P658RC and CY10C. Black coloured, phenolic resin impregnated carbon graphite. For use with hot and cold water up to 85°C.

Supplier: Morgan AM & T (UK)


WRAS Approved Materials


 

Section: 5022   View Entire Section

WRAS Approval Number: 1010508

CY25C & MAT4000. Black coloured, carbon washer, intended to manufacture seals and thrust rings for use in pumps. For use with water up to 85°C.

Supplier: Morgan AM & T (UK)


WRAS Approved Materials


 

Section: 5022   View Entire Section

WRAS Approval Number: 1106500

CY9198. Black coloured carbon/graphite washer. For use with water up to 85°C.

Supplier: Morgan AM & T (UK)


WRAS Approved Materials


 

Section: 5022   View Entire Section

WRAS Approval Number: 0712516

AG21 P/T and MCI320/T. Dark grey carbongraphite, phenolic resin disc and component. For use with water up to 85°C.

Supplier: Morgan Carbon Italia Srl


WRAS Approved Materials


 

Section: 5022   View Entire Section

WRAS Approval Number: 0901509

W03 Carbongraphite. Dark grey carbongraphite ring for use in pumps. For hot and cold water use up to 85°C.

Supplier: Morgan Carbon Italia Srl


WRAS Approved Materials


 

Section: 5022   View Entire Section

WRAS Approval Number: 0710523

Carbongraphite CTI-9. Grey coloured resin-impregnated carbon. For use with cold water and hot water up to 85°C.

Supplier: Morgan Carbon Italia Srl


WRAS Approved Materials


 

Section: 5022   View Entire Section

WRAS Approval Number: 0703511

Hexoloy SA & Hexoloy SP. Silicone carbide grey material. For cold water and hot water use up to 85°C.

Supplier: Saint-Gobain Advanced Ceramics Corporation


WRAS Approved Materials


 

Section: 5022   View Entire Section

WRAS Approval Number: 1109524

FC941. Grey/black coloured, compression moulded carbon bearings. For use with water up to 85°C.

Supplier: Schunk UK Ltd


WRAS Approved Materials


 

Section: 5022   View Entire Section

WRAS Approval Number: 0812516

M825 Carbon. Black coloured carbon material. For use with hot and cold water up to 85°C.

Supplier: Vulcan Engineering Ltd


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1112508

PS5000 Grey. Grey coloured, moulded and sintered silicon carbide washer. For use with water up to 85°C.

Supplier: Morgan AM&T


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1110528

Martoxid KMS 94. White coloured, compression moulded ceramic material. For use with water up to 85°C.

Supplier: Cera Systems Verschleissschultz GmbH


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1112519

EKasic® F, EKasic® F plus, EKasic® C & EKasic® G. Grey coloured silicon carbide material. For use with water up to 85°C.

Supplier: ESK Ceramics GmbH & Co KG


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1108504

Porcelain Heating Element Kukel KUL 59. Grey coloured, moulded ceramic material. For use with water up to 85°C.

Supplier: *Kukel International Group Ltd.*


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0911514

AK 99,5. Off white coloured, compression moulded, alumina ceramic shafts, seal rings and plungers. For use with hot and cold water up to 85°C.

Supplier: Barat Ceramics GmbH


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0809504

Cumituff 995. Cream coloured, moulded ceramic material. For use with hot and cold water up to 85°C.

Supplier: Carborundum Universal Ltd.


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1004520

Alumina Ceramic HS 14/2. Brown coloured, compression moulded ceramic material. For use with hot and cold water up to 85°C.

Supplier: Cera Systems Verschleissschultz GmbH


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1002536

CD 101. Grey coloured, compression moulded ceramic disc. For use with hot and cold water up to 85°C.

Supplier: CeramTec GmbH (Formerly CeramTec AG)


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0811507

Rubalit IS95 & Rubalit IS95 brown. Ceramic discs for water taps. For hot and cold water use up to 85°C

Supplier: CeramTec GmbH (Formerly CeramTec AG)


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1002535

Rubalit A 1896 White. White coloured, compression moulded ceramic disc. For use with water up to 85°C.

Supplier: CeramTec GmbH (Formerly CeramTec AG)


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1004524

AD94. White coloured, compression moulded ceramic material. For use with hot and cold water up to 85°C.

Supplier: Coorstek


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1004522

AD995. White coloured, compression moulded ceramic material. For use with hot and cold water up to 85°C.

Supplier: Coorstek


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1004523

SC30. Compression moulded silicon carbide material. For use with hot and cold water up to 85°C.

Supplier: Coorstek


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1110501

AD96 white. White coloured, dry pressed, sintered Aluminium Oxide material. For use with water up to 85°C.

Supplier: Coorstek


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1108521

W94. White coloured, press moulded ceramic material. For use with water up to 85°C.

Supplier: Coorstek Ltd


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0803525

SC - 2. Grey coloured, silicon carbide component. For use with cold water and hot water up to 85°C.

Supplier: CoorsTek.


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0704507

Ekasic G. Grey coloured moulded silicone carbide. For cold water and hot water use up to 85°C.

Supplier: ESK Ceramics GmbH & Co KG


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0904509

Ekasic P. Dark grey coloured silicone carbide ceramic sealing ring. For use with hot and cold water up to 85°C.

Supplier: ESK Ceramics GmbH & Co KG


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0704506

Ekasic F & Ekasic C. Grey coloured moulded silicone carbide. For cold water and hot water use up to 85°C.

Supplier: ESK Ceramics GmbH & Co KG


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0704503

Ekasic C, Ekasic F and Ekasic F Plus. Grey coloured silicone carbide. For cold water and hot water use up to 85°C.

Supplier: ESK Ceramics GmbH & Co KG


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0806501

C5 Coralith. Dark grey coloured, Glass Bonded Brown Fused Alumina Ceramic. For use with cold water only.

Supplier: Fairey Industrial Ceramics Ltd.


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1011529

StarCeram S. Grey coloured, compression moulded silicone carbide ring. For use with water up to 85°C.

Supplier: H C Starck Ceramics GmbH & Co KG


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0808517

Ibiceram SC - 850B. Dark grey coloured silicon carbide material. Cold water use only.

Supplier: Ibiden Co. Ltd.


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0808516

Ibiceram SC - 850A. Dark grey coloured silicon carbide material. Cold water use only.

Supplier: Ibiden Co. Ltd.


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0808515

Ibiceram SC - 550(3). Dark grey coloured porous silicon carbide material impregnated with lubricant. Cold water use only.

Supplier: Ibiden Co. Ltd.


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0811502

DBQ101. Grey coloured silicone (SIC) carbide ceramic. For use with hot and cold water up to 85°C.

Supplier: Joint Power Shanghai Seals Co. Ltd.


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0802511

96 & 99, 7% AL2O3 Gaskets. White coloured ceramic gaskets. For cold and hot water use up to 85°C.

Supplier: Keramo SPA


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0802512

Silicon Carbide (SLC) Washers. Grey coloured silicon carbide gaskets. For cold and hot water use up to 85°C.

Supplier: Keramo SPA


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0802510

Steatite Washers 221K. Beige coloured ceramic gaskets. For cold and hot water use up to 85°C.

Supplier: Keramo SPA


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0910516

A473. White coloured, aluminium oxide stationary ring. For use with hot and cold water up to 85°C.

Supplier: Meccanotecnica Umbra Spa


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0709513

Tufbide. Grey coloured sintered silicone carbide (ceramic) washer. Cross sectional thickness of 1.6mm. For cold and hot water use up to 85°C.

Supplier: Microcera LLC


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0901505

Hilox 961/3 light brown, Hilox 961 brown, Hilox 961/4 brown, Hilox 882 pink, Hilox 965 white & Hilox 991 white ceramic discs. For use with water up to 85°C. These products are not suitable for use in plumbing installations associated with dialysis equipment.

Supplier: Morgan Technical Ceramics Ltd.


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1010510

MX Ceramic. Off white coloured, compression moulded ceramic disc. For use with water up to 60°C.

Supplier: MX Group


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0907536

Ceramic Circle DL-002. Dark Grey coloured , silicon carbide component. For use with hot and cold water up to 85°C.

Supplier: Ningbo Donglian Mechanical Seal Co. Ltd.


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0811525

Ceramic Circle. Cream coloured circular ceramic aluminium sesquioxide ring. For use with hot and cold water up to 85°C.

Supplier: Ningbo Donglian Mechanical Seal Co. Ltd.


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0812512

White coloured ceramic discs. For hot and cold water use up to 85°C

Supplier: Nuova Galatron Srl


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0706503

X086 ceramic dome-hydraulic pressed into formed shape. Cold water use only.

Supplier: OI Filtration Ltd


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1009506

PUC - SC15. Grey coloured silicon carbide components. For use with water up to 85°C.

Supplier: Penn United Carbide


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0703512

Aluminium Oxide Rapal Light. Cream coloured ceramic disc. For cold water and hot water use up to 85°C.

Supplier: Rauschert Heinersdorf Pressig GmbH


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1011514

Alumina AI960 white C795. White coloured, compression moulded ceramic disc (manufactured at Rauschert, Portugal). For use with water up to 85°C.

Supplier: Rauschert Heinersdorf Pressig GmbH


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0712508

KER 221 DIN VDE 0335 - IEC 672. Cream coloured ceramic washer. For cold and hot water use up to 85°C.

Supplier: Roplan Ltd


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0705524

Ceramic Material T195. For cold water and hot water use up to 85°C.

Supplier: Saint Gobain Advanced Ceramics


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0804507

CarSIK SD. Grey silicon carbide ring. For use with hot and cold water up to 85°C.

Supplier: Schunk Ingenieurkeramik GmbH


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0805512

S.C.C. Ceramic disc. White Ceramic component disc for use in tap headworks. For use with hot and cold water up to 85°C.

Supplier: Shinhan Ceramic Co., Ltd.


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1106519

SYAL 950. White coloured, compression moulded ceramic. SYAL B950. Brown coloured, compression moulded ceramic. For use with water up to 85°C.

Supplier: Ssangyong Materials Corporation


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 0904510

WNV2. Grey coloured sintered silicon carbide washer. For hot and cold water use up to 85°C

Supplier: Vulcan Engineering Ltd


WRAS Approved Materials


 

Section: 5023   View Entire Section

WRAS Approval Number: 1003531

V99 Ceramic Disc. White coloured, compression moulded ceramic seal. For use with cold water only.

Supplier: Vulcan Engineering Ltd


WRAS Approved Materials


 

Section: 5026   View Entire Section

WRAS Approval Number: 0906526

JSAW-JAL. Factory applied, sulphate resisting cement mortar. For use with hot and cold water up to 50°C.

Supplier: Jindal Saw Ltd - IPU


WRAS Approved Materials


 

Section: 5026   View Entire Section

WRAS Approval Number: 0912506

EDELCLRX FN 221. Cream coloured, ready mixed, air drying synthetic resin based coating. For cold water use only.

Supplier: P C Chanda & Company (P) Ltd


WRAS Approved Materials


 

Section: 5026   View Entire Section

WRAS Approval Number: 1008507

Maanshan Sulphate Resisting Cement Mortar Lining. Factory applied, grey coloured cement mortar intended to line ductile iron pipes. For use with water up to 60°C.

Supplier: Saint-Gobain Pipelines Co Ltd (Maanshan)


WRAS Approved Materials


 

Section: 5026   View Entire Section

WRAS Approval Number: 1008506

Xuzhou Sulphate Resisting Cement Mortar Lining. Factory applied, grey coloured cement mortar intended to line ductile iron pipes. For use with water up to 60°C.

Supplier: Saint-Gobain Pipelines Co Ltd (Xuzhou)


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0811533

ARC 855. Black and grey coloured epoxy coatings. For use with cold water only.

Supplier: A W Chesterton Company


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0811534

ARC S2. Grey and green coloured epoxy coatings. For use with cold water only.

Supplier: A W Chesterton Company


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1107518

Belzona 1321. Two part epoxy amine coating available in blue and grey. Mix and apply as per manufacturer`s instructions. Cure for 21 days at 7°C. For use with water up to 23°C.

Supplier: Belzona Polymerics Ltd


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1006522

Belzona 1341. Grey coloured, two part epoxy coating. Cure for 7 days at 15°C. For use with water up to 23°C.

Supplier: Belzona Polymerics Ltd


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1102504

Eurokote 468 Thixo Brun Rouge. Two part, factory applied, red-brown coloured epoxy coating. Mix and apply as per manufacturer`s instructions. Cure for 15 days at 23°C. For use with water up to 23°C.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1105534

Endoprene 888.54. Beige coloured, two part polyurethane coating, factory applied by airless spray. Mix and apply as per manufacturer`s instructions. Cure for 8 days at 20°C. For use with water up to 23°C.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0801530

Eurokote 438 Bleu Graphite. Factory applied blue epoxy coating. Cold water use only.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1105535

Endoprene 84-20. Beige coloured, two part polyurethane coating, factory applied by airless spray. Mix and apply as per manufacturer`s instructions. Cure for 8 days at 20°C. For use with water up to 23°C.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1004533

Hycote EA5WB coating available in blue (18 E 53 & RAL 5015) & grey (RAL 7031) colours. Factory applied, epoxy resin coating intended to line metal pipes and fittings. For use with water up to 23°C.

Supplier: Corrosion Protection Products


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0905524

Colorcoat Prisma, factory applied polyurethane metal coating. For cold water use only. The product is available in the following colours: S7673 Athena, S7542 Pegasus, S7540 Aquarius, S7595 Atlantis, S7647 Kronos, RAL9006 Silver Metallic, RAL9007 Grey Aluminium, S7646 Sirius, S7651 Orion, S7597 Zeus, S7669 Ephyra, S7539 Helios, RAL1015 Cream, RAL3009 Oxide Red, RAL9002 Hamlet, RAL6005 Clover, RAL5014 Denim, RAL8017 Chocolate Brown, RAL9005 Black, RAL9010 White, RAL7035 Oyster, RAL7012 Slate Grey, RAL7000 Alaska Grey, RAL7016 Anthracite, Terracotta Matt, Anthracite Matt & Copprium Matt.

Supplier: Corus Colors


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0911502

Meng Xiang. Blue coloured, factory applied epoxy powder coating. For use with cold water only.

Supplier: Danyang Koroter Powder New Material Co. Ltd.


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1002504

Corvel Blue 76-51002. Blue coloured, factory applied nylon powder coating. For use with hot and cold water use up to 85°C.

Supplier: Dow Powder Coatings


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1011504

Alesta Vanguard Blue Epoxy Powder (5E24937LGS). Blue coloured, factory applied epoxy powder coating. Apply as per manufacturer`s instructions. Cure for 7 minutes at 200°C. For use with water up to 23°C.

Supplier: DuPont Powder Coatings (UK) Ltd


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0704513

Greblon. Grey coloured PTFE coating. Spray applied. For cold water and hot water use up to 85°C.

Supplier: Fluhs Drehtechnik GmbH


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0904527

ML-9A10WGL444. White coloured, modified epoxy powder coating intended for metallic components. For use with hot and cold water up to 85°C

Supplier: Ganzlin Beschichtungspulver GmbH


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0908523

Inverpul Epossidico Tribo BT Bleu 5005. Dark blue, factory applied epoxy based powder coating. For cold water use only.

Supplier: Inver Spa


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1106506

Eponics WP-NS for roller coating. Grey coloured, two part epoxy resin coating. For use with water up to 60°C

Supplier: Kubota Corporation


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1105532

Amercoat 391 PC. Grey coloured, factory applied two part epoxy coating. Mix and apply as per manufacturer`s instructions. Cure for 7 days at 20°C. For use with water up to 23°C.

Supplier: PPG Coatings Europe B V


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0903501

Sigmaguard CSF 585. Pale blue coloured, two-part solvent free, amine cured epoxy coating. For cold-water use only.

Supplier: PPG Protective and Marine Coatings


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0806506

Jin Dapeng, blue coloured, Epoxy Powder Coating. For use with cold and hot water up to 85°C.

Supplier: Qingdao Jin Dapeng Coating Factory


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0910539

Xuzhou Blast Furnace Cement Mortar. Factory applied, grey coloured mortar intended to line ductile iron pipes. For use with water up to 60°C.

Supplier: Saint Gobain PaM


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1001520

GH-1. Black coloured, factory applied solvent based paint. For use with water up to 23°C.

Supplier: Saint-Gobain Pipelines Co Ltd (Maanshan)


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0909509

Sherardize FP50 Black & Sherardize FP50 Blue. Two part, factory applied zinc dust primer and fluropolymer top coat. For use with hot and cold water up to 85°C.

Supplier: Sherardize UK Ltd


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1005515

Cepox P05 95. Mustard coloured, two part epoxy coating consisting of a base and hardener. Mix, apply and cure as per manufacturer`s instructions. Intended for use during the manufacture of pipes and cisterns etc. not to be used on site or as a repair material. For use with water up to 85°C.

Supplier: Soficor Mader


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0703517

Jimingaiyue. Blue coloured epoxy powder coating. Cold water use only.

Supplier: Tianjin Jiamingaiyue Powder Coatings Ltd.


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1006507

Polyester tgic 5010HB (light blue coloured) and 5012HB (mid blue coloured). Factory applied polyester powder coating. For use with water up to 85°C.

Supplier: Univercol Paints Ltd.


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0808539

Interpon 100. Blue coloured epoxy coating for use with metal seated wedge gate valves. Cold water use only.

Supplier: Waterfront Fluid Controls Ltd


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1002516

Xylan factory applied PTFE coatings. For use with hot and cold water up to 85°C. Xylan 1010/F2599 black, 1010/F0871 Black, 1010/F2599 Grey Black, 1010/F5025 Grey Black, 1010/F9443 Grey Black, 1610/G5025 Grey Black, 8110/G0871 Black, 8110/G0975 Black & 8110/G2599 Grey Black. Xylan 5200/F2420 Black, 1270/G2420 Black & 5200/F2420 Black. Xylan 5200/F2422 Royal Blue, 1270/G2422 Royal Blue, 5200/F2422 Royal Blue & 5200/F6122 Royal Blue. Xylan 5200/F5068 Silver, 1270/G5068 Silver & 5200/F5068 Silver.

Supplier: Whitford UK.


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0702523

HG-916. Liquid epoxy black coating. Anti-corrosion lining for pipes. For cold water and hot water use up to 65°C.

Supplier: Xinxing Ductile Iron pipes Co Ltd


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0703523

HG-915B. Brown colour two component solventless. Anti-corrosion lining for pipes. For cold and hot water use up to 65°C

Supplier: Xinxing Ductile Iron pipes Co Ltd


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 1012514

RAL-5015. Factory applied, blue coloured fusion bond epoxy powder coating intended to line ductile iron pipes. For use with water up to 65°C.

Supplier: Xinxing Ductile Iron pipes Co Ltd


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0703522

HG-915R. Light red colour two component solventless. Anti-corrosion lining for pipes. For cold water and hot water use up to 65°C.

Supplier: Xinxing Ductile Iron pipes Co Ltd


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0702524

H53. Black epoxy resin coating. Anti-corrosion lining for pipes. For cold water and hot water use up to 65°C.

Supplier: Xinxing Pipes Group Handan Industrial Co. Ltd.


WRAS Approved Materials


 

Section: 5028   View Entire Section

WRAS Approval Number: 0811518

Tianli 5070. Blue coloured, polyester epoxy powder coating. For use with hot and cold water up to 85°C.

Supplier: Yantai Tianli Electrostatic Coating Co. Ltd.


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1112507

Qingdao Yuanshunda, Blue 5017. Blue coloured, factory applied epoxy powder coating. For use with water up to 85°C.

Supplier: Qingdao Yuanshunda Moulding Powder Co., Ltd.


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1112500

Resicoat R4 factory applied, epoxy powder coatings. For use with water up to 85°C. Resicoat R4 blue: R4-ES HJ601R, R4-ES HJ605R, R4-ES HJ606R, R4-FB HJC03R, R4-FB HJC04R, R4-FB HJC06R, R4-FB HJC08R, R4-FB HJC12R PAM blue, R4-ES HJF01R, R4-ES HJF10R, R4-ES HJF13R PAM blue, R4-ES HJF14R, R4-ES HJF21R, R4-ES HJF22R, R4-ES HJF23R, R4-ES HJF24R, R4-ES HJF26R, R4-ES HJF42R, R4-ES HJF47R, R4-ES HJG05R, R4-ES HJG07R, R4-ES HJG08R. Resicoat R4 red/red-brown: R4-FB HGC07R, R4-FB HGC17R, R4-ES HGF03R, R4-ES HGF04R, R4-ES HGF10R, R4-ES HGF17R, R4-ES HGF20R, R4-ES HGF22R RAL 3011, R4-ES HGH02R. Resicoat R4 black: R4-ES HNF04R. Resicoat R4 green: R4-FB HKC71R. Resicoat R4 grey.

Supplier: Akzo Nobel Powder Coatings GmbH


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0710522

Resicoat PI. Green coloured factory applied epoxy resin coating for pipes. For use with cold water and hot water up to 85°C.

Supplier: Akzo Nobel Powder Coatings GmbH


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1002521

Resicoat PI. Brown coloured, electrostatic sprayed, factory applied epoxy powder coating. For cold water use only.

Supplier: Akzo Nobel Powder Coatings GmbH


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0810519

Resicoat RS. Blue coloured two pack solvent free epoxy material. Cure for 48 hours at 23°C. Cold water use only.

Supplier: Akzo Nobel Powder Coatings GmbH


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0910504

Rilsan polyamide powder coatings to be used in conjunction with Primgreen LAT 12035 epoxy resin primer. The following grades are for use with hot and cold water up to 60°C: T Black 7450 AC, T Blue 7443 MAC, T Green 7529 MAC, T Grey 5161 MAC and T White 1488 AC.

Supplier: Arkema


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0803510

Rilsan ESY Blue 7265 with Primgreen Lat 12035 primer. Blue coloured nylon powder coating. For cold water use only.

Supplier: Arkema


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0808540

Unikor RB. Water-dispersed ground coat. For hot and cold water use up to 60°C

Supplier: Autosib Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1105500

H0401. Red coloured epoxy coating. For use with water up to 65°C.

Supplier: Beijing Caamsc Corrosion Control Technique Co, .Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0904508

FLB Filepoks SBB solvent free epoxy paint. White coloured two-part solvent free epoxy coating for application on metal surfaces. Cold water use only.

Supplier: Betek Boya Ve Kimya San AS


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0801510

Sheraplex. Factory applied coating in colours blue, green, silver & black. Cold water use only.

Supplier: Bodycote Metallurgical Coatings Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1103502

Eurokote 469 & Eurokote 469SR. Factory applied, red coloured epoxy coating. Apply as per manufacturer`s instructions. Cure for 7 days at 20°C. For use with water up to 23°C.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0909508

EUROKOTE® 711.92. Factory applied epoxy powder coating. Apply as per manufacturer`s instructions. Cure for 5 minutes at 200°C. For use with water up to 85°C. EUROKOTE® 711.92 BF blue 5015, EUROKOTE® 711.92 BF blue 5005 CR, EUROKOTE® 711.92 BF Blue 5005 & EUROKOTE® 711.92 BF blue 5017. EUROKOTE® 711.92 blue 5015, EUROKOTE® 711.92 Blue 5005, EUROKOTE® 711.92 blue 5005 CR & EUROKOTE® 711.92 blue 5017. EUROKOTE® 711.92 Red Brown.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0904537

Eurokote 448 Black. Black coloured, factory applied epoxy paint. For use with hot and cold water up to 40°C.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0905523

Endoprene BS 88-20. Factory applied, cream coloured, two-part polyurethane coating. For use with hot and cold water up to 45°C.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0708536

Eurokote 448 Bleu Graphite. Eurokote 448 Bleu 5002 (Cure for 10 days at 20°C). Eurokote 448 Bleu 5005 (Cure for 7 days at 20°C). Eurokote 448 Bleu 5013 (Cure for 7 days at 20°C). Blue coloured, factory applied epoxy resin coating. Apply as per manufacturer`s instructions. For use with water up to 23°C.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1106511

Eurokote 46-20. Factory applied, two part, red/brown coloured paint consisting of an epoxy resin and hardener. Mix and apply as per manufacturer`s instructions. Cure for 7 days at 23°C. For use with water up to 60°C.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1002537

Eurokote 4820 Blue, Eurokote 4820 Ivory, and Eurokote 4820 Red/Brown. Two part epoxy paint. For cold water use only.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1009528

Scotchkote 206N green. Green coloured, epoxy resin coating. For use with water up to 23°C.

Supplier: Corrosion Protection Products


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0906514

3M Scotchkote Epoxy Coating 162PWX. Grey coloured epoxy coating for lining of tanks, pipes and fittings. Suitable for use with hot and cold water up to 60°C.

Supplier: Corrosion Protection Products


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1002502

Janwally. Blue coloured, thermosetting polyester resin powder coating. For cold water use only.

Supplier: Dalian Zhen-hua Powder Trading Company Limited


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1006527

Deep Guard. Brown, blue and white coloured, airless spray applied, two part epoxy paint. For use with water up to 65°C.

Supplier: Deep Industries


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0908530

Delta-Seal Black, Blue & Silver. Factory applied coating intended for use with metal. For use with cold water only.

Supplier: Deepak Fasteners UK Ltd.


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0709512

Alesta E Water blue EE8000 - 5006835. Alesta E Water blue EE8000 - 5006836. Blue epoxy thermosetting powder. For cold and hot water use up to 70°C.

Supplier: DuPont Huajia Chemical Co. Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0803524

Eco Coat FBE Powder E/105/7010. Blue coloured, fusion bonded, epoxy coating. For use with cold and hot water up to 85°C.

Supplier: Electrosteel Castings Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0907514

Electrocement. Factory applied, cement mortar for lining ductile iron pipes. For use with hot and cold water up to 50°C.

Supplier: Electrosteel Castings Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1108509

Promag. Factory applied, black coloured polyurethane coating. Mix and apply as per manufacturer`s instructions. For use with water up to 23°C.

Supplier: Endress & Hauser Flowtec AG


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0808546

Hempel pipecoating 87650. Blue coloured, factory applied, two-part epoxy based coating, intended to line pipe & fittings. For use with water up to 23°C.

Supplier: Hempel A/S


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0706529

IBA Kimya FP6102. Blue coloured fusion bonded epoxy coating. For use with cold water and hot water up to 85°C.

Supplier: IBA Kimya Sanayi Ve Ticaret A.S.


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1105503

Estrabond ECO 600 IR. Polyolefin alloy coating, available in white and black. For use with water up to 23°C.

Supplier: Intechem Polymer Systems & Co.


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0906524

JSAW-JAL. Factory applied cement mortar lining for ductile iron pipes. For hot and cold water use up to 50°C.

Supplier: Jindal Center


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0705501

Ordinary Portland Cement. Cement mortar lining for ductile iron pipe. Cold water use only.

Supplier: Jindal Saw Ltd - IPU


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0710547

Corro-Coat EP-F 5001. Blue coloured fusion bonded epoxy resin. For cold and hot water use up to 85°C.

Supplier: Jotun Powder Coatings


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1011510

Corro-Coat EP-F 1003HW. Blue coloured, factory applied fusion bonded epoxy coating. For use with water up to 85°C.

Supplier: Jotun Powder Coatings


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0906531

J-Line 6001.Blue coloured, Electrostatic sprayed, fusion bonded epoxy coating. For use with hot and cold water up to 85°C.

Supplier: Jotun Powder Coatings


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0906530

EP-F 1003LD. Beige coloured, electrostatic srayed fusion bonded epoxy coating. For hot and cold water use up to 85°C.

Supplier: Jotun Powder Coatings (N) A/S


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0801529

Corro-Coat EP-F 5001/C460012A/Sky Blue/A700632. Factory applied blue fusion bonded epoxy. For cold water and hot water use up to 85°C.

Supplier: Jotun Powder Coatings (Thailand) Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0807514

Kanepox Hygienic 19570 & Kanepox Lining Free 18521. Factory applied, cream coloured, 2 component, solventless epoxy coating. For use with cold water only.

Supplier: Kanat Paints and Coatings


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0806515

EX4412 and EX4412 - Blue (K). Grey coloured and blue coloured, factory applied, epoxy resin based powder coating. For use with hot and cold water up to 85°C.

Supplier: KCC Corporation


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0701520

IG4848. Brown coloured epoxy based coating. For cold water and hot water use up to 85°C.

Supplier: KCC Corporation


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0810527

EX4412 blue. Karumel (FBE Powder Coating). Blue coloured epoxy resin based powder coating. For use with hot and cold water up to 85°C

Supplier: KCC Corporation


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0806522

Korepox H.B EH3100, two-component epoxy resin coating. Coatings comprise of base, EH3100-A-Yellow & curing agent EH3100-B, and base EH3100-A-Grey & curing agent EH3100-B. For hot and cold water use up to 40°C.

Supplier: KCC Corporation


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0907519

Klamflex Lak RAL 9005 (29-0008 black coloured) and RAL 5015 (25-0084 blue coloured). Factory applied epoxy powder coating. For use with hot and cold water up to 60°C.

Supplier: Klamflex Pipe Couplings (Pty) Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1007522

FKR026-KCIP. Grey coloured, factory applied epoxy powder coating intended to internally coat ductile iron pipes and fittings. For use with water up to 65°C.

Supplier: Korea Cast Iron Pipe Ind. Co. Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1009547

Kubota sulfate-resisting Portland cement. Factory applied cement intended to line pipe & fittings. For use with water up to 60°C.

Supplier: Kubota Corporation


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1008537

Kubota Powder Coating TK1413F. Grey coloured, factory applied epoxy resin powder coating intended to line pipe & fittings. For use with water up to 60°C.

Supplier: Kubota Corporation


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1009501

Everclad 3510 V Grey. Grey coloured, electrostatic sprayed epoxy resin powder coating. For use with water up to 60°C.

Supplier: Kubota Corporation


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1010517

Kinlin EPX-111. Blue coloured, factory applied epoxy powder coating. For use with water up to 23°C.

Supplier: Langfang Kinlin Powder Coating Co Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1109501

NPE 300. Blue coloured, factory applied epoxy resin coating. For use with water up to 85°C.

Supplier: Nippon Paint (Tianjin) Co Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0701503

Portland cement based mortar lining PCML & Slag Portland cement based mortar lining SPCML. Anticorrosive protective internal lining for ductile iron pipe. Mix and apply as per manufacturer`s instructions. For cold water and hot water use up to 60°C.

Supplier: OAO Lipetsk Iron Works Svobodny Sokol


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0811531

Edelpoxy FN TM 142. Red coloured two part epoxy resin based coating. Mix, apply and cure as per manufacturers instructions. Suitable for hot and cold water use upo to 60°C.

Supplier: P C Chanda & Company (P) Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0701518

PPA 661 Blue 502. Blue coloured polymer alloy powder coating. Cold water applications only.

Supplier: Plascoat Systems Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1004508

Plascoat PPA801 Black 700 & Plascoat PPA801 Blue 502, factory applied polyethylene coating. These products do not require a primer or undercoat. For hot and cold water use up to 85°C.

Supplier: Plascoat Systems Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1109500

PPA 571 black, PPA 571 Blue 536, PPA 571 ES Blue 536, PPA 571 HES Blue 536 & PPA 571H Blue 536. Factory applied, blue coloured polyolefin coatings. Apply as per manufacturer`s instructions. Cure PPA 571 ES Blue 536 & PPA 571 HES Blue 536 for 200°C for 20 minutes. For use with water up to 23°C.

Supplier: Plascoat Systems Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1001507

ETB Polimiks EPO Power. Red coloured, factory applied epoxy based coating. For use with cold water only.

Supplier: Polimiks Boya Kimya San. Tic. Ltd. Sti.


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0701534

Powercron 6060. Black coloured epoxy-urethane coating. Cold water use only

Supplier: PPG Industries France


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1109504

Powercron CR 451 A. Factory applied, dark blue coloured, cross-linked epoxy-urethane polymeric coating. Apply as per manufacturer`s instructions. Cure for 20 minutes at a metal temperature of 180°C. For use with water up to 23°C.

Supplier: PPG Industries France


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0904523

MAVM554. Blue coloured epoxy powder coating. Suitable for use with hot and cold water up to 85°C

Supplier: Pulver Kimya San. Ve Tic. S.A.


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0909502

SPUA-406. Yellow coloured, factory applied, polyurethane based, anti-corrosion pipe coating. For use with hot and cold water up to 65°C.

Supplier: Qingdao Jialian New Chemical Chemical Materials Co. Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1004516

Plascoat PPA 571ES. Blue coloured, polyolefin alloy coating. For use with hot and cold water up to 50°C.

Supplier: Rivitswade Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0705528

Powercron 451A. Modified epoxy urethane. For cold water use only.

Supplier: Saint Gobain PaM


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1108511

SG-GH-S06. Factory applied, dark blue coloured, high chlorinated polyethylene (HCPE) paint. Apply as per manufacturer`s instructions Cure for 1 hour at 70°C. For use with water up to 60°C.

Supplier: Saint-Gobain Pipelines Co Ltd (Maanshan)


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1106507

SG-GH-S06. Blue coloured, brush applied solvent based paint. For use with water up to 23°C.

Supplier: Saint-Gobain Pipelines Co Ltd (Maanshan)


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0706550

Samsun Makina Sanayi A.S. blue coloured fusion bonded epoxy coating. For use with cold water and hot water up to 85 °C.

Supplier: Samsun Makina Sanayi A.S.


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1105530

309032 Epoxy resin coating. Red coloured, factory applied, epoxy resin coating. For use with water up to 23°C.

Supplier: Shijiazhuang Kingdar Special Coating Co Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0901508

ELC 257/91. Green coloured two part epoxy resin lining material. Mix and apply as per manufacturers instructions. Cure for 1 hour @ 60°C. Cold water use only.

Supplier: Subterra


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1010511

SC3 Blue Coating. Blue coloured, PTFE based product intended to coat `O` rings. For use with water up to 85°C.

Supplier: Superior Seals Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1110525

SC1 Coating. Factory applied, transparent PTFE based coating intended for application to Superior Seals WRAS Approved `O` rings, seals and gaskets. Apply as per manufacturer`s instructions. For use with water up to 85°C.

Supplier: Superior Seals Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1105521

SC4. Clear coloured PTFE coating for use with `O` rings, seals & gaskets. For use with water up to 85°C

Supplier: Superior Seals Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1110526

SC2 Coating. Factory applied, transparent PTFE based coating intended for application to Superior Seals WRAS Approved `O` rings, seals and gaskets. Apply as per manufacturer`s instructions. For use with water up to 85°C.

Supplier: Superior Seals Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0707513

SC4 Blue coating for `O` rings, seals and gaskets. For cold water and hot water use up to 85°C.

Supplier: Superior Seals Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0705508

SC1 & SC2. Transparent coatings for Superior Seals listed rubbers. Factory applied to provide low friction surface. For cold and hot water use up to 85°C.

Supplier: Superior Seals Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1007533

FBE-4 5005 & FBE-4 5010. Blue coloured, factory applied epoxy phenolic based coating. For use with water up to 85°C.

Supplier: Univercol Paints Ltd.


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0910513

Innovalve. Grey coloured, factory applied epoxy powder coating. For cold water use only.

Supplier: UTS Limited


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0906505

E1H8691, E1H7389 & E2H6531. Factory applied, blue coloured fusion bonded epoxy powder coatings. E2H6531 is for use with water up to 70°C. E1H8691 & E1H7389 are for use with water up to 23°C.

Supplier: Valspar Powder Coatings Ltd


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 0808530

Rilsan ES White 1464EC. White coloured nylon coating. For use with hot and cold water up to 85°C. C.

Supplier: Watts Industries France


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1004526

Credit. Blue and ivory coloured epoxy resin coating. For use with water up to 85°C.

Supplier: Xian Credit Standing Fine Chemical Co. Ltd.


WRAS Approved Materials


 

Section: 5030   View Entire Section

WRAS Approval Number: 1108501

WB-108. Factory applied, grey coloured, liquid epoxy coating. Cure for 2 hours at 20°C. For use with water up to 65°C.

Supplier: Xinxing Ductile Iron pipes Co Ltd


WRAS Approved Materials


 

Section: 5034   View Entire Section

WRAS Approval Number: 0908536

IB10029A Isopol Brush Gel Coat. Grey coloured, isophthalic brushing polyester gelcoat. Intended for use during the hand-lay manufacture of GRP components only, not to be used on site or as a repair material. Apply and cure as per manufacturer`s instructions. For use with hot and cold water up to 40°C.

Supplier: Colorplas Ltd


WRAS Approved Materials


 

Section: 5034   View Entire Section

WRAS Approval Number: 0711523

Vitrium EN. Blue / white coloured glass coating. For cold water and hot water use up to 85°C.

Supplier: Engineered Storage Products Company


WRAS Approved Materials


 

Section: 5034   View Entire Section

WRAS Approval Number: 0911510

Hempadur multi-strength 35530 (base 35539 with curing agent 95530). Light grey coloured, two part, factory applied, polyamine cured epoxy paint. For cold water use only.

Supplier: Hempel A/S


WRAS Approved Materials


 

Section: 5034   View Entire Section

WRAS Approval Number: 0903502

Hempadur 15590 and Hempadur 35560. Two part primer and two part topcoat. Off-white colour. Cured for 13 days at 23°C then soaked in tap water for 2 X 24 hours at 23°C. Cold wtare use only.

Supplier: Hempel A/S


WRAS Approved Materials


 

Section: 5034   View Entire Section

WRAS Approval Number: 0911509

Hempadur 35560 (base 35569 with curing agent 98560). Pink/brown coloured, two part, factory applied, polyamine cured epoxy paint. For hot and cold water use up to 35°C.

Supplier: Hempel A/S


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 0801533

Endoprene 891.20. Cream coloured, factory applied, Polyurethane coating. For use with hot and cold water up to 55°C.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 0704518

Dark Green Two-Component Epoxy Poliammine. For cold water use only.

Supplier: Caprari Pumps (Uk) Ltd


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 0704517

Primer Hydrogalfa Epol Red Oxide. For cold water use only.

Supplier: Caprari Pumps (Uk) Ltd


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 0704519

Glossy Black Two-Component Epoxy Vinylic. For cold water use only.

Supplier: Caprari Pumps (Uk) Ltd


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 1003534

Polyglass VEF. Cream coloured polyester coating. Mix and apply as per manufacturer`s instructions. Cure for one day at 14-18°C. For use with water up to 23°C.

Supplier: Corrocoat Ltd


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 1105527

Fluiglide E. Off-white coloured, two part, factory applied epoxy coating consisting of a base and activator. Mix and apply as per manufacturer`s instructions. Cure for 7 days at 18°C. For use with water up to 23°C.

Supplier: Corrocoat Ltd


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 1003535

Polyglass VEF, to be used in conjunction with Fluiglide. Cream coloured, spray applied vinylester glassflake under coat and polyester top coat. Cure for one day at 14-18°C. For use up to 23°C.

Supplier: Corrocoat Ltd


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 1007509

LUBERBOX-2K-VHS-Lackfarbe IV80.502, glossy ultramarine blue RAL 5002. Factory applied, blue coloured epoxy coating. For use with water up to 23°C.

Supplier: KSB Aktiengesellschaft


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 0806525

V-PET. Factory applied, grey coloured, two-part epoxy resin powder coating. Mix and apply as per manufacturer`s instructions. Cure for 10 minutes at 200°C. For use with water up to 60°C.

Supplier: Kyusyuu Tyutekkan Co. Ltd.


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 1002512

Edelpoxy FN 132. Blue coloured, liquid epoxy resin coating. For use with hot and cold water up to 85°C.

Supplier: P C Chanda & Company (P) Ltd


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 1002511

Edelpoxy FNSL 151. Grey coloured, solventless alkylated polyamine adduct based epoxy paint. For cold water use only.

Supplier: P C Chanda & Company (P) Ltd


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 1109534

DollyTech WA. Clear, factory applied, water based polyurethane resin for spray application. For use with water up to 23°C.

Supplier: Pacific Products Ltd


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 1010509

903 Epoxy Resin. Red coloured epoxy resin coating. For use with water up to 65°C.

Supplier: Shijiazhuang City Paint Company


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 1005516

Halar 3404DA. Grey coloured ethylene-chlorotrifluoroethylene electrostatic powder coating. Apply as per manufacturer`s instructions. Cure for 10 minutes at 260°C. For use up to 85°C.

Supplier: Solvay Solexis SPA


WRAS Approved Materials


 

Section: 5036   View Entire Section

WRAS Approval Number: 0705527

141 Pota-Pox 80 B2506 DeZurick Blue. Factory applied coating for valves. For cold water use only.

Supplier: Tnemec Company Incorporated


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0805509

Conipur M869F. Elastomeric polyurethane membrane applied onto Mastertop Primer 616 or Mastertop Primer 660. Mix and apply as per manufacturers instructions. Cure 21 days at 7°C. For use with cold water only.

Supplier: BASF Construction Chemicals (UK) Ltd


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0702512

Aquasol. Water based two part epoxy resin white coloured coating. Mix and apply as per manufacturer`s instructions. Cure 21 days at 7°C. Cold water use only.

Supplier: Conren Ltd


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0707522

Corroless EPF primer and Corroless RF35 (2006). Grey coloured two-component epoxy system. Mix and apply as per manufacturers instructions. Final cure 7 days at 12°C. Cold water applications only.

Supplier: Corroless Corrosion Control


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0701513

3M Scotchkote Urethane Sealer 165CS. Translucent two component solvent free polyurethane coating. Mix and apply as per manufacturer`s instructions. Cure 7 days at 7°C. Cold water use only.

Supplier: Corrosion Protection Products


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0909516

3M Scotchkote 166L. Grey coloured, two part polymeric coating. Mix and apply as per manufacturer`s instructions. Cure for 1 hour at 7°C. For use with cold water only.

Supplier: Corrosion Protection Products


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0909510

Aquatek Super XA. Grey coloured, cement based waterproof coating, intended for use on concrete. Mix and apply as per manufacturers instructions. Cure coat 1 for 10.5 hours at 7°C and coat 2 for 14 days at 7°C. For use with cold water only.

Supplier: De Neef UK Ltd


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0802508

Hyperkote 500. Grey coloured polyurethane. Shore hardness 85°A. For cold water use only.

Supplier: Dow Hyperlast Ltd


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0811508

Renderoc ST 05 & Nitobond ST. 2 component, acrylic modified, cementitious brush and fairing coat. Mix and apply as per manufacturers instructions. Cure 21 days at 7°C. Cold water use only.

Supplier: Fosroc Ltd


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0906536

Polypoxy PS. Light grey coloured, two part epoxy polysulphide coating. Mix and apply as per manufacturer`s instructions. Cure for 14 days at 21°C. For use with water up to 60°C.

Supplier: Henkel Polybit Industries Ltd


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0912513

Irabond BC60 (primer) for use with Aqualine 400 (top coat). Epoxy primer for use with grey coloured elastomeric polyurethane top coat. The two part primer should be mixed and applied as per manufacturer`s instructions and cured for 24 hours at 7°C. The top coat should be mixed and applied as per manufacturer`s instructions and then cured for 20 days at 7°C. For use with cold water only.

Supplier: Irathane Futura


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0912514

Aqualine 400. Two part, grey coloured, elastomeric polyurethane coating. Mix and apply as per manufacturer`s instructions and cure for 20 days at 7°C. For use with cold water only.

Supplier: Irathane Futura


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0912515

Polyurea 2000. Two part, grey coloured, elastomeric polyurethane coating. Mix and apply as per manufacturer`s instructions and cure for 20 days at 7°C. For use with cold water only.

Supplier: Irathane Futura


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0912512

Irabond BC50 (primer) for use with Polyurea 2000 (top coat). Epoxy primer for use with grey coloured elastomeric polyurethane top coat. The two part primer should be mixed and applied as per manufacturer`s instructions and cured for 24 hours at 7°C. The top coat should be mixed and applied as per manufacturer`s instructions and then cured for 20 days at 7°C. For use with cold water only.

Supplier: Irathane Futura


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 1007506

Aqualine 650 to be used in conjunction with Irabond BC50. Irabond BC50 is a two part epoxy primer. Aqualine 650 is a 2 part, grey coloured polyurethane elastomer coating. Mix and apply as per manufacturer`s instructions. Allow Irabond BC50 primer to cure for 1 day at 7°C, before applying Aqualine 650, and allowing to cure for a further 21 days at 7°C. For use up to 23°C.

Supplier: Irathane Futura


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 1008538

Eponix 73HB. Grey coloured, factory applied 2-part epoxy resin coating intended to line pipe & fittings. For use with water up to 23°C.

Supplier: Kubota Corporation


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0703515

Masterseal 200 EPS-P. Pink coloured epoxy coating. Concrete and metal coating. Cure 14 days at 14°C. For cold water and hot water use up to 60°C.

Supplier: Saudi MBT for Building Materials Co (BASF)


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 1106512

SikaGard 62. Site applied, grey coloured, two part epoxy resin coating consisting of a base and hardener. Mix and apply as per manufacturer`s instructions. Cure for 21 days at 7°C. For use with water up to 23°C.

Supplier: Sika Hong Kong Ltd


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0908525

Tamseal 10F. Grey coloured, two component, site applied acrylic modified cementitious coating intended for use on concrete. Mix and apply as per manufacturer`s instructions. Cure for 3 days at 7°C. For cold water use only.

Supplier: Tam International UK Ltd


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0712509

TamSeal 10. Cement based structural waterproofing material. Cure 21 days at 7°C. Cold water use only.

Supplier: Tam International UK Ltd


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0703504

Vandex Concrete Grey. Cementitious waterproofing slurry. Apply as per manufacturer`s instructions. Cure 21 days at 7°C. Cold water use only.

Supplier: Vandex International Ltd


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0703503

Vandex BB White. Cementitious waterproofing slurry. Apply as per manufacturer`s instructions. Cure 21 days at 7°C. Cold water use only.

Supplier: Vandex International Ltd


WRAS Approved Materials


 

Section: 5038   View Entire Section

WRAS Approval Number: 0907542

Watco Hygienic Wall Coating. White and cream coloured, water based, two part epoxy resin coating. Mix and apply as per manufacturer`s instructions. Cure for 10 days at 25°C. For cold water use only.

Supplier: Watco (UK) Ltd


WRAS Approved Materials


 

Section: 5040   View Entire Section

WRAS Approval Number: 1006506

Waterline P300 tank lining. Two component, epoxy based coating consisting of a base (black coloured) and hardener (white coloured). Mix and apply as per manufacturer`s instructions. Cure 16 hours at 3C. For use with water up to 23°C only.

Supplier: Leigh`s Paints


WRAS Approved Materials


 

Section: 5040   View Entire Section

WRAS Approval Number: 0707502

Stainless Steel spray aerosol 500ml. Silver coloured spray. Corrosion protector of welds in stainless steel. Spray applied. Cure 1 hour at 3°C. Cold-water use only.

Supplier: Ashworth Supplies


WRAS Approved Materials


 

Section: 5040   View Entire Section

WRAS Approval Number: 0909515

Belzona 5811DW2 Grey and Belzona 5811DW2 Cream. Two part coating. Mix and apply as per manufacturer`s instructions. Cure for 21 days at 7°C. For cold water use only.

Supplier: Belzona Polymerics Ltd


WRAS Approved Materials


 

Section: 5040   View Entire Section

WRAS Approval Number: 1108530

Filepoks SBB Paint. Red coloured, brush applied two part epoxy coating. Mix and apply as per manufacturer`s instructions. Cure for 7 days at 12°C. For use with water up to 23°C.

Supplier: Betek Boya Ve Kimya San AS


WRAS Approved Materials


 

Section: 5040   View Entire Section

WRAS Approval Number: 1010504

Flogul 645 Bleu. Blue coloured, spray applied PVDC resin based coating. Apply as per manufacturer`s instructions. Cure for 7 days at 20°C. For use with water up to 23°C.

Supplier: BS Coatings


WRAS Approved Materials


 

Section: 5040   View Entire Section

WRAS Approval Number: 0708506

13059 Hot water tank enamel. For cold water and hot water use up to 85°C.

Supplier: Ege Kimya Sanayi Ve Ticaret A.S.


WRAS Approved Materials


 

Section: 5040   View Entire Section

WRAS Approval Number: 0806509

Loctite 7222. 2 part epoxy resin coating. Mix and apply as per manufacturers instructions. Cure 6 hours at 25°C. For use with cold water only.

Supplier: Henkel Ltd.


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 1201507

ePIPE® UK. Reddish-Brown coloured, two part epoxy coating. Mix and apply as per manufacturer`s instructions. Air cured for 60 minutes at 25°C and then water cured for 60 minutes at 60°C. For use with water up to 85°C.

Supplier: Pipe Restoration Technologies, LLC


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 1006534

3M Scotchkote Epoxy Ceramic Surfacer CR 511. Grey coloured, two part epoxy resin coating. Mix and apply as per manufacturer`s instructions. Cure for 21 days at 7°C. for use with water up to 23°C.

Supplier: 3M Northallerton, 3M UK Plc.


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 1110511

3M Scotchkote Pipe End Seal 329. Grey coloured, brush applied, two part polyurethane coating. Mix and apply as per manufacturer`s instructions. Cure for 2 hours at 5°C. For use with water up to 23°C.

Supplier: 3M Northallerton, 3M UK Plc.


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 1006523

Belzona 5891. Light grey coloured, two part epoxy coating. Mix and apply as per manufacturer`s instructions. Cure for 7 days at 20°C. For use with water up 85°C.

Supplier: Belzona Polymerics Ltd


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 1006520

Belzona 1391 (Ceramic HT). Dark grey coloured, two part epoxy coating. Mix and apply as per manufacturer`s instructions. Cure for 7 days at 18°C. For use with water up to 85°C.

Supplier: Belzona Polymerics Ltd


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0710536

Geopox GX014. Red oxide coloured epoxy for coating and lining of pipes. Cold water use only.

Supplier: Corrosion Protection Products


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0905515

3M Scothkote Epoxy Coating 162PW grey & 3M Scothkote Epoxy Coating 162PW blue. Two component solvent free epoxy coatings available in blue or grey. Mix and apply as per manufacturer`s instructions. Cure for 21 days at 7°C. Cold water use only.

Supplier: Corrosion Protection Products


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0912516

Maxepox Flex. Grey coloured, two part epoxy coating. Mix and apply as per manufacturer`s instructions. Cure for 15 days at 20°C. For cold water use only

Supplier: Drizoro SA


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0706516

Nitocote EPSW. Two-component epoxy polysulphide coating. Mix and apply as per manufacturers instructions. Cure for 6 days and 15 hours at 27C. Cold-water use only.

Supplier: Fosam Company Ltd


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 1109512

Titanseal 989. Two part polyurethane coating consisting of a bright blue coloured base & amber coloured hardener. Mix and apply as per manufacturer`s instructions. Cure for 24 hours at an ambient (21-22°C) temperature. For use with water up to 23°C.

Supplier: Gennor & Company (Chemicals) Ltd


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0904507

Kopatch PC300. Blue/straw coloured, two component, liquid epoxy coating. Mix and apply as per manufacturer`s instructions. Cure 7 days at 25°C. For use with cold water only.

Supplier: KCC Corporation


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0703519

Neo-Gose #2300FW, light grey coloured epoxy coating for interior of water pipes. For cold water and hot water use up to 60°C.

Supplier: Kubota Corporation


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 1109538

Versathane. Two part polyurethane coating consisting of a bright blue coloured base & amber coloured hardener. Mix and apply as per manufacturer`s instructions. Cure for 24 hours at an ambient (21-22°C) temperature. For use with water up to 23°C.

Supplier: Practical Compounds Ltd.


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0703528

Prospapox 200 HES Bleu and Hardener Propapox 200 HES. Two part epoxy coating. For cold water use only.

Supplier: Prospa


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0903522

Sikagard-136 DW. Blue coloured, two -part, solvent free epoxy coating. Mix and apply as per manufacturer`s instructions. Cure 7 days at 15°C. For use with hot and cold water up to 40°C.

Supplier: Sika Services AG


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0903523

Sikagard-136 DW to be used in conjunction with Sika Icoment 540. Blue coloured, two -part, solvent free epoxy coating (Sikagard-136 DW) intended for use with a two-part, cementitious levelling mortar (Sika Icoment 540). Mix and apply as per manufacturer`s instructions. Cure 7 days at 15°C. For use with hot and cold water up to 40°C.

Supplier: Sika Services AG


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0903524

Sika Permacor 136 TW. Blue coloured, two -part, solvent free epoxy coating. Mix and apply as per manufacturer`s instructions. Cure 7 days at 15°C. For use with hot and cold water up to 40°C.

Supplier: Sika Services AG


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0712529

Acothane Mastic Grade. Blue coloured, two pack polyurethane coating. Mix and apply as per manufacturer`s instructions. Cure for 14 days at 7°C. For use with cold water only.

Supplier: Spencer Coatings Ltd


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0712527

Acothane Spray Grade. Blue coloured, two pack polyurethane coating. Mix and apply as per manufacturer`s instructions. Cure for 14 days at 7°C. For use with cold water only.

Supplier: Spencer Coatings Ltd


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0712528

Acothane Brush Grade. Blue coloured, two pack polyurethane coating. Mix and apply as per manufacturer`s instructions. Cure for 14 days at 7°C. For use with cold water only.

Supplier: Spencer Coatings Ltd


WRAS Approved Materials


 

Section: 5042   View Entire Section

WRAS Approval Number: 0905512

ELC 173/90. Cream coloured two component epoxy resin material designed for the rehabilitation of drinking pipes by centrifugal spray application to the bore of the pipe. Cure for 16 hours at 3°C. Cold water use only.

Supplier: Subterra


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 0812518

Jaz - Tankcoat (DW).Two part epoxy resin green coloured lining for drinking water tamks. Mix and apply as per manufacturer`s instructions. Cure for 7 days at 25°C. For hot and cold water use up to 60°C

Supplier: Al Jazeera Factory for Paints Co (KSA)


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 0908538

Al-Jazeera Flexi-tank. Green coloured, two part epoxy-polysulphide coating. Mix and apply as per manufacturer`s instructions. Cure for 7 days at 25°C. For use with water up to 55°C.

Supplier: Al Jazeera Factory for Paints Co (KSA)


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 1008536

Aquakote Koi-Kote. Turquoise coloured, two part epoxy resin coating. Mix and apply as per manufacturer`s instructions. Cure for 6 hours at 15°C. For use with water up to 23°C.

Supplier: Aquakote Systems Ltd.


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 1109513

Masterseal 180. Grey coloured, brush applied two part epoxy resin coating. Mix and apply as per manufacturer`s instructions. Cure first coat for 36 hours at 20°C. Cure second coat for 21 days at 20°C. For use with water up to 40°C.

Supplier: BASF Construction Chemicals UAE LLC


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 1105502

Clean Keep 5000. Off white coloured and red/brown coloured, two part epoxy coating. Mix and apply as per manufacturer`s instructions. Cure for 7 days at 20°C. For use with water up to 23°C.

Supplier: Chugoku Paints bv


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 0707523

Corroless EPF primer and Corroless RF35 (2006). Grey coloured two-component epoxy system. Mix and apply as per manufacturers instructions. Final cure 7 days at 12°C. Cold water applications only.

Supplier: Corroless Corrosion Control


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 0701510

Chem-Crete E430. Blue coloured two part solvent free epoxy coating. Waterproof coating. For cold water and hot water use up to 45°C.

Supplier: Epicuro Ltd


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 0908512

Nitocote EP405, solvent free epoxy resin coating system. Mix white coloured base coat with hardener and apply to surface (coat 1) and then mix blue coloured top coat with hardener (coat 2) and apply over coat 1. Mix and apply base and top coat with hardener as per manufacturer`s instructions. Cure coat 1 for 18 hours at 7°C before applying coat 2. Cure coat 2 for 21 days at 7°C. For use with water up to 23°C.

Supplier: Fosroc Ltd


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 0810509

Solar Seal PW100. Blue coloured resin coating. Apply and cure as per manufacturers instructions. For use with cold water only.

Supplier: Garrard Europe Ltd.


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 0703513

Interline 975 SF. Cream coloured solvent free epoxy coating for potable water lining. For cold water and hot water use up to 60°C.

Supplier: International Paint Ltd


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 1005511

Interline 925. Two part epoxy coating, available in cream and white. Mix and apply as per manufacturer`s instructions. Cure for 7 days at 25°C. For use with hot and cold water up to 60°C.

Supplier: International Paint Ltd


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 0908535

Interline 925 GF. Cream coloured two part epoxy coating. Mix and apply as per manufacturer`s instructions. Cure for 7 days at 25°C. For use with hot and cold water up to 60°C.

Supplier: International Paint Ltd


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 0812524

Tankguard DW. White coloured, two part epoxy coating. Mix and apply as per manufacturer`s instructions. Cure for 14 days at 10°C. For use with water up to 23°C.

Supplier: Jotun A/S


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 0912521

Permare EPW Tropical. Grey coloured, two part epoxy polysulphide coating. Mix and apply as per manufacturer`s instructions. Cure for 21 days at 25°C. For use with hot and cold water up to 55°C.

Supplier: Stirling Lloyd Polychem Ltd


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 0801517

Nu-Tank 400E System. Blue coloured two-part epoxy resin coating system. Mix and apply as per manufacturer`s instructions. Cure 49 hours at (20 ±2) °C. Cold water applications only.

Supplier: Winn & Coales (Denso) Ltd


WRAS Approved Materials


 

Section: 5046   View Entire Section

WRAS Approval Number: 0711521

Zinga. Grey coloured zinc coating. Cold water use only.

Supplier: Zinga UK


WRAS Approved Materials


 

Section: 5048   View Entire Section

WRAS Approval Number: 0810533

3M Scotchkote Urethane Coating 165PW-PR Grey & 3M Scotchkote Urethane Coating 165PW grey, cream & blue. Two component urethane coating (solvent free) Mix and apply as per manufacturer`s instructions. Cure for 7 days at 7°C. Cold water use only. These products may also be factory applied.

Supplier: Corrosion Protection Products


WRAS Approved Materials


 

Section: 5048   View Entire Section

WRAS Approval Number: 1004509

EKOPIPE. Red coloured, two part epoxy resin coating. Mix and apply as per manufacturer`s instructions. Cure for 72 hours at 23°C. For use with hot and cold water up to 70°C.

Supplier: EKS Kimya Sanayi Ve Ticaret Ltd. Sti


WRAS Approved Materials


 

Section: 5048   View Entire Section

WRAS Approval Number: 1004506

Brushable Ceramic White. Two part, white coloured, ceramic filled epoxy coating consisting of a resin base (white coloured) and hardener (straw coloured). Intended to seal and protect new or repaired surfaces from cavitation, pitting, erosion and wear. Mix and apply as per manufacturer`s instructions. Cure 7 days at 12°C. For use with cold water only.

Supplier: ITW Devcon


WRAS Approved Materials


 

Section: 5048   View Entire Section

WRAS Approval Number: 0906534

Eponics WP-NS. Grey coloured, two-part epoxy resin coating consisting of a base and hardener. Mix and apply as per manufacturer`s instructions. Cure for six hours at 30°C. For use with water up to 60°C.

Supplier: Kubota Corporation


WRAS Approved Materials


 

Section: 5048   View Entire Section

WRAS Approval Number: 0910508

Aqua-Pipe PU, two part pipe lining. Mix resin and hardener at a ratio of 100:30, and apply as per manufacturer`s instructions. Cure for 2 hours at 65°C, and cool under pressure for 48 hours. For cold water use only.

Supplier: Sanexen Environmental Services Inc


WRAS Approved Materials


 

Section: 5048   View Entire Section

WRAS Approval Number: 0810530

Polyurea hot spray system. Black coloured 2 component coating system consisting of Quick Prime 2 part epoxy resin and Quick Spray Supreme W top coat. Mix and apply as per manufacturers instructions. For hot and cold water use up to 85°C

Supplier: Voelkel Industrie Produkte GmbH


WRAS Approved Materials


 

Section: 5050   View Entire Section

WRAS Approval Number: 1109540

Vandex Mineralit. Site applied, clear surface hardening agent. Apply as per manufacturer`s instructions. Cure for 14 days at 7°C. For use with water up to 23°C.

Supplier: Vandex International Ltd


WRAS Approved Materials


 

Section: 5050   View Entire Section

WRAS Approval Number: 0703505

Vandex Mineralit. Surface hardening agent. Apply as per manufacturer`s instructions. Cure 14 days at 7°C. Cold water applications only.

Supplier: Vandex International Ltd


WRAS Approved Materials


 

Section: 5052   View Entire Section

WRAS Approval Number: 1008525

BFC02-KCIP. Factory applied Blast Furnace Cement Mortar intended to line ductile iron pipes and fittings. For use with water up to 65°C.

Supplier: Korea Cast Iron Pipe Ind. Co. Ltd


WRAS Approved Materials


 

Section: 5052   View Entire Section

WRAS Approval Number: 1011512

Lanco Gold Cement. Factory applied, grey coloured cement mortar intended to line ductile iron pipes. For use with water up to 50°C.

Supplier: Lanco Industries Ltd.


WRAS Approved Materials


 

Section: 5052   View Entire Section

WRAS Approval Number: 1102513

Ma`anshan blast furnace slag cement mortar. Light grey coloured portland based cement mortar intended to line pipes. For use with water up to 23°C.

Supplier: Saint-Gobain Pipelines Co Ltd (Maanshan)


WRAS Approved Materials


 

Section: 5052   View Entire Section

WRAS Approval Number: 1102512

Xuzhou blast furnace slag cement mortar. Light grey coloured portland based cement mortar intended to line pipes. For use with water up to 23°C.

Supplier: Saint-Gobain Pipelines Co Ltd (Xuzhou)


WRAS Approved Materials


 

Section: 5052   View Entire Section

WRAS Approval Number: 1006512

Dalmia Sulphate Cement. Pale grey coloured cement, intended to line ductile iron pipes. Mix and apply as per manufacturer`s instructions. Cure for 28 days at temperatures between 30°C and 36°C. Surface should be kept damp for the first three days of cure time, and left to cure naturally for the remaining 25 days. For use with water up to 60°C.

Supplier: Tata Metaliks Kubota Pipes Ltd


WRAS Approved Materials


 

Section: 5052   View Entire Section

WRAS Approval Number: 0811536

Birla cement chetak. Cement mortar intended to line ductile iron pipe and fittings. For use with hot and cold water up to 60°C.

Supplier: Tata Metaliks Kubota Pipes Ltd


WRAS Approved Materials


 

Section: 5052   View Entire Section

WRAS Approval Number: 1005524

XX-CM2. Grey coloured cement mortar intended to line ductile iron pipes. For use with water up to 65°C.

Supplier: Xinxing Ductile Iron pipes Co Ltd


WRAS Approved Materials


 

Section: 5052   View Entire Section

WRAS Approval Number: 1005525

XX-CM3. Grey coloured sulphate resisting cement mortar intended to line ductile iron pipes. For use with water up to 65°C.

Supplier: Xinxing Ductile Iron pipes Co Ltd


WRAS Approved Materials


 

Section: 5052   View Entire Section

WRAS Approval Number: 1005523

XX-CM1. Grey coloured cement mortar intended to line ductile iron pipes. For use with water up to 65°C.

Supplier: Xinxing Ductile Iron pipes Co Ltd


WRAS Approved Materials


 

Section: 5052   View Entire Section

WRAS Approval Number: 1102517

DIP blast furnace slag cement mortar. Light grey coloured Portland cement mortar intended to line pipes. For use with water up to 23°C.

Supplier: Xuzhou Ever Bright Ductile Iron Pipes Co Ltd


WRAS Approved Materials


 

Section: 5055   View Entire Section

WRAS Approval Number: 1111507

Vandex Concrete Grey. Site applied, two part (grey powder & water), grey coloured, cementitious waterproofing material. Mix and apply as per manufacturer`s instructions. Cure for 21 days at 7°C. For use with water up to 23°C.

Supplier: Vandex International Ltd


WRAS Approved Materials


 

Section: 5055   View Entire Section

WRAS Approval Number: 1108537

Vandex Plug & Vandex Uni Mortar 1. Site applied, two part (grey powder & water), grey coloured, cementitious waterproofing material. Mix and apply as per manufacturer`s instructions. Cure for 21 days at 7°C. For use with water up to 23°C.

Supplier: Vandex International Ltd


WRAS Approved Materials


 

Section: 5055   View Entire Section

WRAS Approval Number: 1108536

Vandex BB 75. Site applied, two part (grey powder & water), grey coloured, cementitious waterproofing material. Mix and apply as per manufacturer`s instructions. Cure for 21 days at 7°C. For use with water up to 23°C.

Supplier: Vandex International Ltd


WRAS Approved Materials


 

Section: 5055   View Entire Section

WRAS Approval Number: 1109539

Vandex Super & Vandex Premix. Site applied, two part (grey powder & water), grey coloured, cementitious waterproofing material. Mix and apply as per manufacturer`s instructions. Cure for 21 days at 7°C. For use with water up to 23°C.

Supplier: Vandex International Ltd


WRAS Approved Materials


 

Section: 5055   View Entire Section

WRAS Approval Number: 0903535

Thoroseal FX100.Grey coloured, 2 part polymer modified cementitious coating. Mix and apply as per manufacturers` instructions. Cure for 21 days at 20°C. For hot and cold water use up to 45°C.

Supplier: BASF Construction Chemicals UAE LLC


WRAS Approved Materials


 

Section: 5055   View Entire Section

WRAS Approval Number: 0702510

PUDLO CWP. Cementittious waterproofing admixture. Cure 7 days at 7°C. Cold water use only.

Supplier: David Ball Group Plc


WRAS Approved Materials


 

Section: 5055   View Entire Section

WRAS Approval Number: 1008512

KA Tank Slurry. Grey coloured, cementitious based coating intended to waterproof. Mix and apply as per manufacturer`s instructions. Cure for 12 days at 7°C. For use with water up to 23°C.

Supplier: Kenyon Agencies Limited


WRAS Approved Materials


 

Section: 5055   View Entire Section

WRAS Approval Number: 0712522

Sovereign Hey`di K11.Grey coloured cementitious waterproofing system. Mix and cure as per manufacturer`s instructions. Cold water use only.

Supplier: Sovereign Chemical Industries Ltd


WRAS Approved Materials


 

Section: 5055   View Entire Section

WRAS Approval Number: 0808513

Tamseal 20. Cementitious waterproofing system. Mix and cure as per manufacturer`s instructions. Cold water use only.

Supplier: Tam International UK Ltd


WRAS Approved Materials


 

Section: 5055   View Entire Section

WRAS Approval Number: 1004512

Xypex Concentrate. Pale grey coloured cementitious coating. Mix and apply as per manufacturer`s instructions. For use with hot and cold water up to 50°C. Cure for 3 days at 7°C in saturated conditions, and then dry cure for a further 18 days at 7°C. Total cure time 21 days at 7°C.

Supplier: Xypex (UK) LLP


WRAS Approved Materials


 

Section: 5057   View Entire Section

WRAS Approval Number: 0706504

Chemcure S. Clear aqueous solution. Concrete curing agent. Apply as per manufacturer`s instructions. Cure 21 days at 7°C. Cold water use only.

Supplier: Nufins