Bituminous Based Products

Section 5021

Small surface area contact only

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

WRAS Approval Number 0809522

Endolac 245-30 FGC. Black coloured factory applied bituminous coating. For use with hot and cold water up to 50°C. Approved for use on applications such as taps, valves and pipe connectors only. NOT for use on large water retaining structures.

Supplier: Axson France SAS

WRAS Approval Number 1007519

Endolac 245.10. Black coloured, factory applied bituminous paint. For use with water up to 50°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water - e.g. taps, valves and pipe connectors.

Supplier: Axson France SAS

WRAS Approval Number 1108502

Deep High Build Liquid Bitumen Paint. Black coloured, factory applied bituminous coating. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Supplier: Deep Industries

WRAS Approval Number 1008541

Bitumen Sealcoat 810. Factory applied, black coloured asphaltic bituminous coating. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Supplier: Kubota Corporation

WRAS Approval Number 1008540

Kubotacoat BM. Factory applied, black coloured asphaltic bituminous coating. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Supplier: Kubota Corporation

WRAS Approval Number 1008539

Kubotaseal BM. Factory applied, black coloured asphaltic bituminous coating. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Supplier: Kubota Corporation

WRAS Approval Number 1109530

Inertol BS10. Factory applied, black coloured bitumen coating. Apply as per manufacturer`s instructions. Cure for 30 minutes at 50-60°C or 5 hours at 23°C. For use with water up to 60°C.

Supplier: Mader Aqualack AG

WRAS Approval Number 1007515

Intertol BS 10 FR. Black coloured, factory applied bituminous coating. For use with water up to 23°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water - e.g. taps, valves and pipe connectors.

Supplier: Mader Aqualack AG

WRAS Approval Number 1002523

Nav-Coat Bitumen Paint 001. Black coloured paint for use with cold water only. Not approved for use on water-retaining structures with large surface to volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water.

Supplier: Nav Durga Chromatics Private Limited

WRAS Approval Number 0910525

PCBIT 111. Black coloured, ready mixed, air drying synthetic resin based coating. For cold water use only. Not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water - e.g. taps, valves and pipe connectors.

Supplier: P C Chanda & Company (P) Ltd

WRAS Approval Number 0811532

PCBIT 111 HT. Black coloured bitumen based coating. Cure as per manufacturer`s instructions. Suitable for hot and cold water use up to 60°C. Not approved for use on water-retaining structures with large surface to volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water. Approved for use on applications such as taps, valves and pipe connectors only.

Supplier: P C Chanda & Company (P) Ltd

WRAS Approval Number 1105505

Endolac 245-30 FGC. Black coloured, factory applied bituminous paint. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. This material is not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks, but may be acceptable for use where there is only a small surface area in contact with the water - e.g. taps, valves and pipe connectors.

Supplier: Saint Gobain PaM

WRAS Approval Number 0902528

Inertol BS 10. Black coloured bituminous coating. Apply as per manufacturer`s instructions. Cure at 90°C - 100°C for one hour. For hot and cold water use up to 60°C. Approved for use on applications such as taps, valves and pipe connectors only. Not for use on large water retaining structures.

Supplier: Samsun Makina Sanayi A.S.

WRAS Approval Number 1105537

Shalitol Black High Build Bitumen Coating. Factory applied, black coloured bitumen coating. For use with water up to 23°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water - e.g. taps, valves and pipe connectors.

Supplier: Shalimar Paints Ltd.