Fibre

Section 5075

WRAS Approval Number 1009540

Novapress Ambition. Grey coloured fibre gasket material. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Frenzelit Werke GmbH

WRAS Approval Number 1303513

Reinz-AFM 34. Grey coloured, calendered aramid fibre gasket material. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Reinz Dichtungs GmbH

WRAS Approval Number 1009541

Himod Flat Seal 15. Grey coloured fibre gasket material. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Trelleborg Sealing Solutions GmbH

WRAS Approval Number 1208534

Himod Flat Seal 20. Blue coloured, calendered, fibre gasket material. For use with water up to 85°C. For use only as a gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Trelleborg Sealing Solutions GmbH

WRAS Approval Number 0906539

DIXO 4000. Orange coloured gasket fibre material bound with NBR. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Specma Seals AB.

WRAS Approval Number 1208537

Dixo 7000 XP. Blue coloured, calendered, fibre gasket material. For use with water up to 85°C. For use only as a gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Specma Seals AB.

WRAS Approval Number 1103500

Belpa CSA 90. Pink coloured, calendered fibre gasket material. For use with water up to 23°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Montero FYE S.A.

WRAS Approval Number 1103501

Belpa CSA 520. Light green coloured, calendered fibre gasket material. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Montero FYE S.A.

WRAS Approval Number 1208514

Novatec Premium XP. Blue coloured, calendered, fibre gasket material. For use with water up to 85°C. For use only as a gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Frenzelit Werke GmbH

WRAS Approval Number 1206563

Thoenes DO181. Grey coloured, fibre gasket material manufacture by beater process. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Thoenes Dichtungstechnik GmbH

WRAS Approval Number 1206507

Doniflex GLD. Grey coloured, fibre gasket material manufacture by beater process. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Donit Tesnit d.o.o.

WRAS Approval Number 1205521

Klingersil C - 4324. Fibre/rubber gasket material, green coloured on one side and grey coloured on the other, manufactured by calendaring. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Rich. Klinger Dichtungstechnik GmbH & Co KG

WRAS Approval Number 0907537

BAGL 3000. Green/blue coloured fibre gasket material. For use with hot and cold water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Donit Tesnit d.o.o.

WRAS Approval Number 1004515

BA-U. Blue coloured compressed gasket material. For use with hot and cold water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Donit Tesnit d.o.o.

WRAS Approval Number 1004530

BAM 6000. Blue Coloured compressed gasket material. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Donit Tesnit d.o.o.

WRAS Approval Number 1003527

BA-50. Green coloured gasket material. For use with hot and cold water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Donit Tesnit d.o.o.

WRAS Approval Number 0905521

SF 2400 & 2800. Green and white marble coloured sheet fibre gasket material. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Flexitallic Ltd

WRAS Approval Number 0905522

SF 3300. Beige and white marble coloured sheet fibre gasket material. For hot and cold water use up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Flexitallic Ltd

WRAS Approval Number 0906519

Novapress® BASIC. Orange coloured gasket fibre material bound with NBR. For hot and cold water use up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Frenzelit Werke GmbH

WRAS Approval Number 1002545

Novapress® Universal. Green coloured, fibre gasket material. For use with hot and cold water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Frenzelit Werke GmbH

WRAS Approval Number 0911503

AF-153. Blue coloured, compressed fibre gasket material. Shore hardness 60-70 D. For hot and cold water use up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Gambit-Lubawka SP ZOO

WRAS Approval Number 1202549

Garlock 4000. Beige coloured, nitrile butadiene rubber (NBR) and aramid fibre sheet jointing material, manufactured by calendaring. For use with water up to 23°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Garlock Sealing Technologies

WRAS Approval Number 0908502

Centellen-R 3825. Yellow coloured, compressed fibre gasket material. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Hecker Werke GmbH & Co

WRAS Approval Number 1111502

Centellen WS 3820. Light green coloured, fibre/NBR gasket material manufactured by calendaring. For use with water up to 60°C. For use only as a jointing/gasket material having been tested at reduced surface area.

Supplier: Hecker Werke GmbH & Co

WRAS Approval Number 1111501

Packing 3815. Red coloured, fibre/NBR gasket material manufactured by calendaring. For use with water up to 60°C. For use only as a jointing/gasket material having been tested at reduced surface area.

Supplier: Hecker Werke GmbH & Co

WRAS Approval Number 0905504

Hecker Centellen HD 3822. Yellow coloured one side and green on reverse, compressed fibre/NBR gasket material. For hot and cold water use up to 60°C. For use as a joining/gasket material only having been tested at a reduced surface area to volume ratio.

Supplier: Hecker Werke GmbH & Co

WRAS Approval Number 0808509

Sentinel (yellow in colour) compressed fibre/rubber gasket material. Calendared sheet material with a shore hardness of 65. For use with hot and cold water up to 85°C.

Supplier: James Walker and Co Ltd (Woking)

WRAS Approval Number 0808512

Inca (green in colour) compressed fibre/rubber gasket material. Calendared sheet material with a shore hardness of 65. For use with hot and cold water up to 86°C.

Supplier: James Walker and Co Ltd (Woking)

WRAS Approval Number 0905525

LATTYgold 92. Gold coloured, NBR/compressed fibre gasket material, manufactured by calandering. For cold water use only. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Latty International SA

WRAS Approval Number 0905520

Lattycarb 96. Grey coloured, compressed fibre gasket material, cut from a calendered sheet. For use with cold water only. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Latty International SA

WRAS Approval Number 1004529

Delta Prim 134. Blue coloured compressed gasket material. For use with hot and cold water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Maagtechnic

WRAS Approval Number 0902527

Belpa CSA 320. Natural coloured, fibre gasket material manufactured by calendaring. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Montero FYE S.A.

WRAS Approval Number 1009505

Novus Graftec. Black/grey coloured NBR/fibre material. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Novus Sealing Ltd

WRAS Approval Number 1204531

Novus N45. Blue coloured, calendered fibre gasket material. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Novus Sealing Ltd

WRAS Approval Number 0809505

Novus 27. Green coloured gasket material. For hot and cold water use up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area.

Supplier: Novus Sealing Ltd

WRAS Approval Number 1008516

Novus 30. Orange coloured gasketting material. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Novus Sealing Ltd

WRAS Approval Number 0905503

Novus 34. Off white coloured NBR aramid fibre gasket material.Suitable for use with hot and cold water up to 85°C. Use only as a joining/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Novus Sealing Ltd

WRAS Approval Number 0809520

Novus 20. Beige coloured compressed fibre gasket material. For hot and cold water use up to 85°C. For use only as a joining/gasket material only having been tested at a reduced surface area.

Supplier: Novus Sealing Ltd

WRAS Approval Number 1012503

Mec-Sint/Vulkanite Bio. Red coloured vulcanized fibre sheet material. For use with water up to 65°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Pidigi Spa

WRAS Approval Number 0905502

Klingersil C-4530. Black coloured compressed fibre gasket material. Cold water use only. For use only as a jointing/gasket, material having been tested at reduced surface area to volume ratio.

Supplier: Rich. Klinger Dichtungstechnik GmbH & Co KG

WRAS Approval Number 0908507

Klinger top-sil-ML1. Yellow coloured, compressed fibre gasket material. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio. For use with cold water only.

Supplier: Rich. Klinger Dichtungstechnik GmbH & Co KG

WRAS Approval Number 0905501

Klingersil C-4430. NBR/compressed green/cream coloured fibre gasket material. Suitable for use with hot and cold water up to 85°C. For use only as a jointing/gasket, material having been tested at reduced surface area to volume ratio.

Supplier: Rich. Klinger Dichtungstechnik GmbH & Co KG

WRAS Approval Number 1004535

Smith-Y-Max. Blue coloured compressed gasket material. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Smith Gaskets

WRAS Approval Number 1108531

Teadit NA 1002. Light green coloured, fibre/NBR gasket material manufactured by calandering. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area.

Supplier: Teadit International Produktions GmbH

WRAS Approval Number 1004532

Thoenes BA 120. Blue coloured compressed gasket material. For use with hot and cold water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Thoenes Dichtungstechnik GmbH

WRAS Approval Number 1003538

Thoenes BA110. Green coloured gasket material. For use with hot and cold water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Supplier: Thoenes Dichtungstechnik GmbH

WRAS Approval Number 0906535

Himod FlatSeal 10. Orange coloured gasket fibre material bound with NBR. For hot and cold water use up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: Trelleborg Sealing Solutions GmbH

WRAS Approval Number 1002528

Vulcanised fibre 09/04. Red coloured fibre sheet material. For use with hot and cold water up to 85°C.

Supplier: Vulkanfiber-Fabrik Ernst Kruger

WRAS Approval Number 0908522

Gore GFO packing fibre. Grey coloured PTFE/graphite material. For hot and cold water use up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Supplier: W L Gore & Associates GmbH