 |
|
WRAS
Approved Materials
|
Hoses & Tubing |
Section 5140 |
|
|
|
Hoses and tubing listed in this section have been tested for the water contact suitability of the material only. |
|
WRAS
Approval Number 1109546 |
|
|
Delta Aquastar. Blue coloured, extruded polyurethane hose. For use with water up to 23°C.
|
|
Supplier: Delta Fire Ltd. |
|
WRAS
Approval Number 1210520 |
|
|
Exquina QS Chrom 21. Dual layered, extruded hose consisting of an off-white coloured, translucent PVC inner layer and un-pigmented, translucent PVC outer layer which incorporates chrome banding. For use with water up to 60°C.
|
|
Supplier: Oldoplast GmbH. |
|
WRAS
Approval Number 1202523 |
|
|
USLSPT. Clear, extruded silicone rubber tube. Shore hardness 60. Tested in-radius sizes between 0.50mm and 1.00mm. For use with water up to 85°C.
|
|
Supplier: United Silicones Ltd |
|
WRAS
Approval Number 1112531 |
|
|
XIN-6709-001A. Dual layer, extruded hose, consisting of black coloured PVC inner layer (GR-PVC 001N) and grey coloured PVC outer layer (GR-PVC 002W). For use with water up to 85°C.
|
|
Supplier: ZheJiang Pan`an Jianshan Xinxing Plastic Factory |
|
WRAS
Approval Number 1201511 |
|
|
`CLH - clear LDPE hose`. Clear, translucent, extruded polyethylene hose. For use with water up to 70°C.
|
|
Supplier: Reflex SrL |
|
WRAS
Approval Number 1111515 |
|
|
SEA2001 (manufactured in Italy & Poland). Dual layer, extruded, composite hoses consisting of red, blue, white or grey PVC outer layer with black PVC inner layer. Dual layer, extruded, composite hose consisting of translucent clear PVC outer layer with translucent clear PVC inner layer. For use with water up to 60°C.
|
|
Supplier: Reflex SrL |
|
WRAS
Approval Number 1301508 |
|
|
Egeplast SLA Pipe. Triple layered pipe consisting of an extruded, black coloured PE 100 inner layer, aluminium middle layer and extruded, blue and brown (longitudinal striped) coloured PE 100 outer later. For use with water up to 23°C.
|
|
Supplier: Westwood Pipelines Ltd. |
|
WRAS
Approval Number 1201517 |
|
|
Alcodial. Triple layered hose, consisting of blue natural rubber outer layer, white natural rubber middle layer and white coloured extruded polyethylene inner layer. For use with water up to 23°C.
|
|
Supplier: Trelleborg Industrie SA |
|
WRAS
Approval Number 1202522 |
|
|
Uniwell Sanistar. Dual layered hose, consisting of black coloured extruded thermoplastic elastomer (TPE) outer layer, shore hardness 85 and black coloured, extruded polyethylene inner layer. For use with water up to 70°C.
|
|
Supplier: Uniwell Rohrsysteme GmbH & Co. KG |
|
WRAS
Approval Number 1303503 |
|
|
212DY tubing. Black coloured, extruded EPDM rubber tubing. Shore hardness 80. Tested in-radius size 0.61mm. For use with water up to 85°C.
|
|
Supplier: Minnesota Rubber & Plastics |
|
WRAS
Approval Number 1305508 |
|
|
CVE80. Black coloured, extruded EPDM rubber hose. Shore hardness 80. Tested in-radius size 1.54mm. For use with water up to 85°C.
|
|
Supplier: VIP Polymers Ltd |
|
WRAS
Approval Number 1305502 |
|
|
Glideflex. Multi-layer hose consisting of translucent, natural polyethylene inner layer, polypropylene reinforcement layer and silver coloured, braided, polypropylene/nylon layer. For use with water up to 70°C.
|
|
Supplier: Neoperl GmbH |
|
WRAS
Approval Number 1302536 |
|
|
CRG. Black coloured, extruded high density polyethylene hose. For use with water up to 85°C.
|
|
Supplier: Neoperl GmbH |
|
WRAS
Approval Number 1206521 |
|
|
Rauaqua PE-X. Semi-opaque, beige coloured, extruded, single layer hose. For use with water up to 85°C.
|
|
Supplier: Rehau Ltd |
|
WRAS
Approval Number 1206573 |
|
|
SPW hose. White coloured, extruded, thermoplastic elastomeric hose. For use with water up to 85°C.
|
|
Supplier: Hydrogomma Spa |
|
WRAS
Approval Number 1209509 |
|
|
CGST150 Silicone Hose. Clear, one layer, extruded silicone hose with polyester braids. Shore hardness 70. Tested in-radius size 1.8mm. For use with water up to 85°C.
|
|
Supplier: Jinhua Chunguang Rubber & Plastic Hose Co. Ltd. |
|
WRAS
Approval Number 1107519 |
|
|
Kott-PEX hose. Cream coloured, polyethylene pipe. For use with water up to 85°C.
|
|
Supplier: Kottmann Technology GmbH |
|
WRAS
Approval Number 1208533 |
|
|
Aquapal® Flexible Hose. Extruded, triple layer hose, consisting of blue coloured NBR/PVC compound outer layer (Shore hardness A 63), white coloured polyester yarn middle re-inforcement layer and black coloured NBR inner layer (Shore hardness A 62). The inner layer is coated with a transparent fluorinated polymer film (Shore hardness D 54). For use with water up to 85°C.
|
|
Supplier: ContiTech, Schlauch GmbH |
|
WRAS
Approval Number 1204512 |
|
|
Rausilam FG hoses. Triple layered, extruded hoses, consisting of translucent silicone rubber inner (extruded from Rau-Sik 8763), polyester fibre middle layer and silicone rubber outer layer (extruded from Rau-Sik 8763). The outer layer is available in white red and transparent. Shore hardness 75. For use with water up to 85°C.
|
|
Supplier: Rehau Ltd |
|
WRAS
Approval Number 1204511 |
|
|
Rausil FG hose & Raulab FG hose. Single layer hoses, extruded from Rau-Sik 8763 silicone rubber available in white red and transparent. The Rausil FG hoses have a talcumed outer layer. Shore hardness 75. Tested in-radius size 1.25mm. For use with water up to 85°C.
|
|
Supplier: Rehau Ltd |
|
WRAS
Approval Number 1202505 |
|
|
Colex NeuVend SI Liner. Extruded, dual layered hose consisting of natural coloured, polyethylene inner layer and black coloured, olefin block co-polymer outer layer. For use with water up to 85°C.
|
|
Supplier: Colex International Ltd |
|
WRAS
Approval Number 1202506 |
|
|
Colex Neuvend SI Hose. Extruded, triple layered hose consisting of natural coloured, polyethylene inner layer, black coloured, olefin block co-polymer middle layer & white coloured, olefin block co-polymer outer layer. The hose is reinforced with polyester in between the middle and outer layers. For use with water up to 85°C.
|
|
Supplier: Colex International Ltd |
|
WRAS
Approval Number 1210534 |
|
|
Tricovend hose. Triple layer, extruded hose, consisting of a black coloured polyester elastomer inner layer, white coloured PVC middle layer with polyester fibre reinforcement and white coloured PVC outer layer. For use with water up to 85°C.
|
|
Supplier: Hozelock Tricoflex |
|
WRAS
Approval Number 1109541 |
|
|
Eschbach Aquadur 2. Blue coloured, extruded polyurethane hose. For use with water up to 23°C. |
|
Supplier: Jakob Eschbach GmbH |
|
WRAS
Approval Number 1208500 |
|
|
Snap-Tite TE Layflat Hose. Blue coloured, extruded, polyurethane hose. The hose is reinforced with polyester fabric which is woven through the polyurethane. For use with water up to 23°C.
|
|
Supplier: Snap-Tite Europe BV |
|
WRAS
Approval Number 0902503 |
|
|
Hydravend hose with Hytrel lining. White coloured hose with black liner.For hot and cold water use up to 85°C
|
|
Supplier: Colex International Ltd |
|
WRAS
Approval Number 0808528 |
|
|
Vendhose. Triple layered, composite hose consisting of grey outer layer, and LDPE clear inner layer. For use with hot and cold water up to 85°C.
|
|
Supplier: Colex International Ltd |
|
WRAS
Approval Number 1004503 |
|
|
Codeflex Aquavend, Codeflex Aquachem and Codeflex H2OSE. White coloured, extruded, PVC outer hoses, with a black TPE liner and polyester reinforcement. For use with hot and cold water up to 85°C.
|
|
Supplier: Copely Developments Ltd |
|
WRAS
Approval Number 0808506 |
|
|
Codeflex Hydrachem / Codeflex Hydrachem DuoSafe. Composite reinforced white coloured hose with black coloured inner layer and a polyester reinforcing middle layer. Cold water use only. |
|
Supplier: Copely Developments Ltd |
|
WRAS
Approval Number 1011509 |
|
|
AMBRA90. Blue coloured, extruded, elastomeric cable. Shore hardness 23D. For use with water up to 23°C.
|
|
Supplier: Fanton Spa |
|
WRAS
Approval Number 0808534 |
|
|
E130 Black EPDM hose. Shore hardness 80°. For hot and cold water use up to 85°C |
|
Supplier: Hydrogomma Spa |
|
WRAS
Approval Number 1003519 |
|
|
Acquablu. Blue coloured, extruded, chlorobutyl rubber hose lined with off-white coloured polyethylene. For use with cold water only.
|
|
Supplier: IVG Colbachini Spa |
|
WRAS
Approval Number 1008515 |
|
|
Ultracore. Black, extruded rubber hose with clear LDPE liner. For use with water up to 85°C. |
|
Supplier: LSP Products Group Inc |
|
WRAS
Approval Number 0908504 |
|
|
Mandals Wellman Hose. Blue coloured, flexible textile reinforced hose lined and covered with thermoplastic polyurethane. For use with cold water only.
|
|
Supplier: Mandals A/S |
|
WRAS
Approval Number 0908541 |
|
|
Mandals Aquaman Hose. Blue coloured, flexible textile reinforced hose lined and covered with thermoplastic polyurethane. For use with cold water only.
|
|
Supplier: Mandals A/S |
|
WRAS
Approval Number 0906510 |
|
|
PVC Type 103. Range of extruded hoses manufactured from PVC. The hoses are available with black inner liner and a choice of red, blue or grey outer layers. For use with hot and cold water up to 60°C.
|
|
Supplier: Miflex 2 Srl |
|
WRAS
Approval Number 1006510 |
|
|
CRG. Opaque, single layer, extruded polyethylene hose. For use with water up to 85°C.
|
|
Supplier: Neoperl GmbH |
|
WRAS
Approval Number 0807525 |
|
|
Glideflex, opaque multi-layered hose. Braided polypropylene/nylon outer hose with polyethylene inner liner. For use with hot and cold water up to 70°C.
|
|
Supplier: Neoperl GmbH |
|
WRAS
Approval Number 1005506 |
|
|
Hydromak pipe. Black coloured, extruded polyethylene pipe with blue coloured polyethylene liner. For use with cold water only.
|
|
Supplier: Petzetakis North Greece SA |
|
WRAS
Approval Number 1103505 |
|
|
Hydrolife SD. Black coloured (with blue stripes), extruded high-density polyethylene pipe. For use with water up to 23°C.
|
|
Supplier: Pipelife Hellas S.A. |
|
WRAS
Approval Number 1010507 |
|
|
Plexaflex - Aquatech PU. Turquoise-green coloured, extruded, PVC hose with a transparent polyether polyurethane inner liner. For use with water up to 23°C.
|
|
Supplier: Plexaco S.A. |
|
WRAS
Approval Number 1011503 |
|
|
Plexaflat/Plexavyl Aquatech PU. Green PVC hose with a translucent straw coloured, extruded polyether polyurethane inner lining. For use with water up to 23°C. |
|
Supplier: Plexaco S.A. |
|
WRAS
Approval Number 0903521 |
|
|
AXIL-76/T-MD. Clear, extruded, silicone rubber hose. Shore hardness 80°. For use with hot and cold water up to 85°C.
|
|
Supplier: Posa SpA |
|
WRAS
Approval Number 1104504 |
|
|
AXIL-76/T-MD. Opaque extruded silicone rubber hose. Shore hardness 80. For use with water up to 85°C. |
|
Supplier: Posa SpA |
|
WRAS
Approval Number 1012509 |
|
|
Boreline. Extruded, blue coloured polyether-polyurethane hose with white coloured polyester fabric middle layer. For use with water up to 23°C.
|
|
Supplier: Proquip Direct Ltd |
|
WRAS
Approval Number 1006500 |
|
|
Qual-PEX Pipe. White coloured, extruded, triple layered pipe. White coloured inner and outer polyethylene layers with an EVOH middle layer. For use with hot and cold water up to 85°C. |
|
Supplier: Quality Plastics Ltd |
|
WRAS
Approval Number 1206531 |
|
|
Qual-PB. Extruded, five layer pipe. White coloured inner and outer polybutylene layers, then an adhesive resin layer either side of a central EVOH layer or grey coloured inner and outer polybutylene layers, then an adhesive resin layer either side of a central EVOH layer. For use with water up to 85°C.
|
|
Supplier: Quality Plastics Ltd |
|
WRAS
Approval Number 0811524 |
|
|
Ecoflex. Translucent PEX hoses. For use with hot and cold water up to 85°C.
|
|
Supplier: Radice Gomma SAS |
|
WRAS
Approval Number 1104502 |
|
|
80-ADX-EPW/TN Nr. 3 hose. Black coloured, extruded EPDM hose. Shore hardness 80. For use with water up to 85°C. |
|
Supplier: Reda SpA |
|
WRAS
Approval Number 0808542 |
|
|
Ponente. PVC hose with polyester fibre reinforcement and TPU liner. The liner is transparent and the outer layers are available in red, white, grey and blue. For hot and cold water use up to 85°C.
|
|
Supplier: Reflex SrL |
|
WRAS
Approval Number 0808543 |
|
|
RE971 natural. Translucent, thermoplastic polyurethane elastomeric (TPU), extruded, translucent tube. For use with hot and cold water up to 85°C.
|
|
Supplier: Reflex SrL |
|
WRAS
Approval Number 0808541 |
|
|
RE971. TPU dual walled hose with polyester fibre reinforcement. The liner is transparent and the outer layers are available in red, white, grey and blue. For hot and cold water use up to 85°C.
|
|
Supplier: Reflex SrL |
|
WRAS
Approval Number 1001508 |
|
|
RAU-PVC 8490-R0100. Natural coloured, extruded, plasticised PVC single walled hose. For use with hot and cold water up to 60°C.
|
|
Supplier: Rehau Ltd |
|
WRAS
Approval Number 1105514 |
|
|
LMU & LMUS triple layered hoses. The LMU has red coloured rubber outer layer, beige coloured rubber/polyester middle layer and natural coloured PE inner layer.
The LMUS hose is as the LMU but with the addition of zinc plated steel wire reinforcement under the outer layer. For use with water up to 23°C.
|
|
Supplier: Semperit Technische Produkte GmbH |
|
WRAS
Approval Number 1101508 |
|
|
Brewmaster 2 tubing. Extruded, two layered polyethylene tube available in natural, black and blue with a nylon inner layer. For use with water up to 23°C.
|
|
Supplier: Valpar Industrial Ltd |
|
WRAS
Approval Number 1012511 |
|
|
Vena® Technosil Ø6.3mm Trans/Azul. Triple layered composite hose consisting of a blue coloured silicone rubber outer layer, polyester middle layer & silicone rubber inner layer. For use with water up to 85°C.
|
|
Supplier: Venair Iberica S.A. |
|
WRAS
Approval Number 1006505 |
|
|
Clearwater hose, blue coloured outer layer with cream coloured polyethylene liner. For use with water up to 50°C.
|
|
Supplier: Veyance Technologies UK Ltd. |
|
|
|
