 |
|
WRAS
Approved Materials
|
Material only |
|
Components made from materials listed in this section may be required to be submitted for audit tests. |
|
WRAS
Approval Number 1201522 |
|
|
`UV Nylon`. Black coloured, injection moulded nylon sheet material. For use with water up to 85°C |
|
Supplier: Innovative Pipesystems Ltd |
|
WRAS
Approval Number 1302516 |
|
|
Grilon TSM-40/4 natural. Beige coloured, injection moulded nylon material. For use with water up to 85°C.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 1301544 |
|
|
Zytel FG77G33L NC010. Beige coloured, injection moulded, glass reinforced polyamide material. For use with water up to 85°C.
|
|
Supplier: DuPont (UK) Ltd |
|
WRAS
Approval Number 1301505 |
|
|
Grivory XE 4101 black 9225 & Grivory HT3V-40 FWA black 9225. Black coloured, injection moulded nylon material.
Grivory XE 4101 natural & Grivory HT3V-40 FWA natural. Natural coloured (cream), injection moulded nylon material.
For use with water up to 85°C.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 1203515 |
|
|
FIBROTEX Nylon 6,6. White coloured, extruded nylon yarn. For use with water up to 23°C.
|
|
Supplier: Kalsep UK Limited |
|
WRAS
Approval Number 1008553 |
|
|
Schulamid 66 GF35 FC4 Black. Black coloured, injection moulded PA66 nylon material. For use with water up to 85°C.
|
|
Supplier: A.Schulman GmbH. |
|
WRAS
Approval Number 1201515 |
|
|
Zytel® FG70G30HSR3 BK309. Black coloured, injection moulded nylon material. For use with water up to 85°C.
|
|
Supplier: DuPont (UK) Ltd |
|
WRAS
Approval Number 1209542 |
|
|
Ultramid A3EG7 FC Aqua Black 23285. Black coloured, injection moulded PA66 nylon material. For use with water up to 65°C.
|
|
Supplier: BASF SE |
|
WRAS
Approval Number 1112518 |
|
|
Nylfor A2. Off-white coloured, injection moulded PA66 nylon material. For use with water up to 85°C. |
|
Supplier: Imagro UK Ltd. |
|
WRAS
Approval Number 1111528 |
|
|
Ultramid® B3EG7 black 00564 (Black coloured) & Ultramid® B3EG7 uncolored (Beige coloured), injection moulded nylon material. For use with water up to 85°C.
|
|
Supplier: BASF SE |
|
WRAS
Approval Number 1104519 |
|
|
Radilon A RV300RKC 106 NAT. Natural coloured, injection moulded nylon material. For use with water up to 85°C.
|
|
Supplier: RADICI Plastics Suzhou Co., Ltd. |
|
WRAS
Approval Number 1202541 |
|
|
Ultramid D3EG10 FC Aqua Black 23285. Black coloured injection moulded polyamide material. For use with water up to 65°C. |
|
Supplier: BASF SE |
|
WRAS
Approval Number 1204529 |
|
|
Zytel® 70G30HSLR BK099. Black coloured, injection moulded nylon. For use with water up to 85°C.
|
|
Supplier: DuPont (UK) Ltd |
|
WRAS
Approval Number 1206520 |
|
|
Zytel® HTNFG52G35HSLR BK011. Black coloured, injection moulded polyphthalamide (PPA) material. For use with water up to 85°C.
|
|
Supplier: DuPont (UK) Ltd |
|
WRAS
Approval Number 1211502 |
|
|
Nilamid A3H5G6 Natural (manufactured by Nilit Plastics Europe S.r.l. and Nilit (Suzhou) Engineering Plastic Technologies Co. Ltd.). Pale olive green coloured, translucent, glass fibre reinforced nylon material. For use with water up to 85°C.
|
|
Supplier: Nilit Plastics Europe Srl. |
|
WRAS
Approval Number 1302512 |
|
|
Akroloy PA GF 30 8 schwarz (4171), Akroloy PA GF 40 8 schwarz (4172), Akroloy PA GF 50 8 schwarz (4173) & Akroloy PA GF 60 8 schwarz (4174). Black coloured, extruded nylon material. For use with water up to 23°C.
|
|
Supplier: Akro Plastic GmbH |
|
WRAS
Approval Number 1302501 |
|
|
Vitamide AR86BK. Black coloured, injection moulded nylon material (manufactured in Malaysia and the UK). For use with water up to 85°C.
|
|
Supplier: JGP Perrite (Warrington) |
|
WRAS
Approval Number 1110532 |
|
|
Ultramid A3EG10 FC Aqua Black 23285. Black coloured, injection moulded PA66 material. For use with water up to 85°C. |
|
Supplier: BASF SE |
|
WRAS
Approval Number 0808538 |
|
|
Akroloy PA GF 40 8 natural (3024) and black (2958). Natural and black coloured glass reinforced nylon material. Cold water use only
|
|
Supplier: Akro Plastic GmbH |
|
WRAS
Approval Number 0908514 |
|
|
Akromid A3 GF 30 8 CN natural (3288). Natural coloured, extruded, nylon 6.6 compound. For use with hot and cold water up to 85°C.
|
|
Supplier: Akro Plastic GmbH |
|
WRAS
Approval Number 1009536 |
|
|
BUM 30 O. Light grey coloured, injection moulded nylon 11. For use with water up to 23°C. |
|
Supplier: Arkema |
|
WRAS
Approval Number 0911505 |
|
|
Rilsan G BZM 30 O TLD A. Beige coloured, injection moulded, glass fibre reinforced nylon material. For use with hot and cold water up to 85°C.
|
|
Supplier: Arkema |
|
WRAS
Approval Number 1009535 |
|
|
BMN G8 TLDA. Black coloured, injection moulded Nylon 11 with 3% graphite. For use with water up to 23°C.
|
|
Supplier: Arkema |
|
WRAS
Approval Number 0907529 |
|
|
Vydyne R530H. Natural and black coloured polyamide 66 with 30% glass fibre. For hot and cold water use up to 85°C.
|
|
Supplier: Ascend Performance Materials SPRL |
|
WRAS
Approval Number 0809523 |
|
|
Ultramid Aqua UV Black 20592. Black coloured moulded nylon material with 35% glass filler. Suitable for use with hot and cold water up to 85°C.
|
|
Supplier: BASF Aktiengesellschaft |
|
WRAS
Approval Number 1009513 |
|
|
Ultramid S3EG6 Uncoloured & Ultramid S3EG6 Aqua UN. Natural coloured, injection moulded polyamide material. For use with water up to 85°C.
|
|
Supplier: BASF SE |
|
WRAS
Approval Number 0907501 |
|
|
Ultramid A3K FC Natural & Ultramid A3K FC Aqua UN. Translucent, straw coloured nylon material. For use with hot and cold water up to 85°C.
|
|
Supplier: BASF SE |
|
WRAS
Approval Number 1109535 |
|
|
Ultramid A3EG7 FC Uncoloured & Ultramid A3EG7 FC Aqua UN. Natural coloured, injection moulded, PA66 polyamide material. For use with water up to 65°C. |
|
Supplier: BASF SE |
|
WRAS
Approval Number 0905505 |
|
|
Nylatron GS-S SN.02.41.M. Dark grey polyamide 66. For hot and cold water use up to 85°C
|
|
Supplier: DSM Engineering Plastics |
|
WRAS
Approval Number 1208504 |
|
|
Zytel FG70G30HSLR NC010. Beige coloured, injection moulded nylon material. For use with water up to 85°C.
|
|
Supplier: DuPont (UK) Ltd |
|
WRAS
Approval Number 1205502 |
|
|
Grilamid LBKN-50H FWA natural (also known as Grilamid XE 4074 natural). Grey coloured, injection moulded nylon material. For use with water up to 85°C.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 0808508 |
|
|
Grilamid L20 G natural 6507. Natural coloured, injection moulded nylon material. For use with hot and cold water up to 60°C.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 0808507 |
|
|
Grivory XE 4101 black 9225 & Grivory HT3V-40 FWA black 9225. Black coloured, injection moulded nylon material.
Grivory XE 4101 natural & Grivory HT3V-40 FWA natural. Natural coloured, injection moulded nylon material.
For use with hot and cold water up to 85°C.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 1008502 |
|
|
Grilamid LV-30H FWA natural and black 9225.
Grilamid LV-50H FWA natural and black 9225.
Grilamid LV-65H FWA natural & black 9225.
Grilamid LV-30H FWA grey 9497.
Injection moulded, glass fibre reinforced PA12 nylon material. For use with water up to 85°C. |
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 0901506 |
|
|
Grilamid TR 60 natural. Light yellow translucent nylon material. Intended for injection moulding. For hot and cold water use up to 85°C
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 0910502 |
|
|
Grilamid LBV-3H WA CL. Natural coloured, injection moulded glass fibre reinforced nylon. For use with hot and cold water up to 85°C.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 1002510 |
|
|
Grilamid LKN-5H Natural. Grey coloured, translucent, glass bead reinforced, injection moulded nylon material. For use with cold water only.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 1002509 |
|
|
Glass fibre reinforced, injection moulded nylon material (15-50% glass fibres). Grilon BG-15/2 natural and black 9697, Grilon BG-30/2 natural and black 9697, Grilon BG-35/2 natural and black 9697 and Grilon BG-50/2 natural and black 9840. For use with hot and cold water up to 85°C.
Glass fibre reinforced, injection moulded nylon material (20-50% glass fibres). Grilamid LV-2H natural and black 9288, Grilamid LV-3H natural and black 9288 and Grilamid LV-5H natural and black 9288. For cold water and hot water use up to 60°C.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 1008501 |
|
|
Grivory HT1V-3 FWA natural and black 9225.
Grivory HT1V-4 FWA natural and black 9225.
Grivory HT1V-5 FWA natural and black 9225.
Grivory HT1V-6 FWA natural and black 9225.
Injection moulded, glass reinforced nylon material. The natural coloured Grivory may also be coloured using MB PA66 black BP4750/25 (using the recommended dosage). For use with water up to 85°C.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 0811520 |
|
|
Grivory GVX-5 FWA Natural and Black 9225 and Grivory GVX-6 FWA Natural and Black 9225. Glass filled nylon material for injection moulding. GVX-5 FWA grade has 50% glass filler. GVX-6 FWA grade has 60% glass filler. Cold water use only.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 1111504 |
|
|
Grivory grades HTV-4X1 natural, HTV-4X1 black 9205, HT1V-4X WA black 9225, HTV-4X1 grey-blue 4637 (dark grey coloured), HTV-4X1 grey 9312 (light grey coloured) & HTV-4X1 grey 9489 (grey coloured).
HTV-5X1 natural & HTV-5X1 black 9205.
HTV-6X1 natural & HTV-6X1 black 9205.
Injection moulded, glass reinforced nylon material. For use with water up to 85°C.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 1012501 |
|
|
Grivory, injection moulded, glass reinforced nylon material. For use with water up to 23°C.
GV-2H natural & GV-2H black 9915. GV-2 FWA natural & GV-2 FWA black 9225.
GV-4H natural & GV-4H black 9915. GV-4 FWA natural & GV-4 FWA black 9225.
GV-5H natural & GV-5H black 9915. GV-5 FWA natural & GV-5 FWA black 9225.
GV-6H natural & GV-6H black 9915. GV-6 FWA natural & GV-6 FWA black 9225.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 1111505 |
|
|
Grilamid grades TR 90 natural & TR 90 LS natural. Injection moulded, translucent, natural coloured nylon material. For use with water up to 85°C.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 1012510 |
|
|
Grilamid, injection moulded nylon 12 material. For use with water up to 60°C. Grilamid L 20 H FWA natural & Grilamid L 20 H FWA black 9225. Grilamid L 25 H FWA natural & Grilamid L 25 H FWA black 9225.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 0902511 |
|
|
Grilamid LBV-30H FWA natural, Grilamid LBV-30H FWA black 9225, Grilamid LBV-50H FWA natural, Grilamid LBV-50H FWA black 9225, Grilamid LBV-65H FWA natural & Grilamid LBV-65H FWA black 9225. Translucent natural or black coloured, glass filled injection moulded nylon material. Glass filler contents of 30%, 50% and 65% respectively. For use with water up to 85°C.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 0810510 |
|
|
Grilon TSM-40/4 natural. Cream coloured, injection moulded nylon material. For use with hot and cold water up to 85°C.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 0906512 |
|
|
Grilon BS/2 Natural, Grilamid L25 Natural, and Grilamid TR55 Natural. Hot and cold water use up to 85°C. Grilamid L20G Natural. Hot and cold water use up to 60°C.Translucent nylon materials.
|
|
Supplier: EMS-CHEMIE AG |
|
WRAS
Approval Number 1008534 |
|
|
Vestamid HT plus M1000 and Vestamid HT plus M1000 black. Natural and black coloured, injection moulded polyamide. For use with water up to 60°C.
Vestamid HT plus M1636 and Vestamid HT plus M1636 black. Natural and black coloured, injection moulded polyamide with 60% glass fibre. For use with water up to 60°C.
|
|
Supplier: Evonik Degussa GmbH |
|
WRAS
Approval Number 0808544 |
|
|
Vitamide AR86BK. Black coloured 30% glass filled nylon material. Suitable for use with hot and cold water up to 85°C.
|
|
Supplier: JGP Perrite (Warrington) |
|
WRAS
Approval Number 0807501 |
|
|
Vitamide AR3XN. Brown coloured nylon material. For use with hot and cold water up to 85°C.
|
|
Supplier: JGP Perrite (Warrington) |
|
WRAS
Approval Number 1006516 |
|
|
Durethan BKV 30 F 901510 SR1. Black coloured, injection moulded nylon material. For use with water up to 65°C.
|
|
Supplier: Lanxess Deutschland GmbH |
|
WRAS
Approval Number 0805510 |
|
|
Durethan BKV 15 F 901510. Black coloured, polyamide material. For use with cold and hot water up to 65°C.
|
|
Supplier: Lanxess Deutschland GmbH |
|
WRAS
Approval Number 0907522 |
|
|
Durethan BKV 15 F 901510 DUS 018. Black coloured, injection moulded, nylon material. For use with hot and cold water up to 85°C.
|
|
Supplier: Lanxess Deutschland GmbH |
|
WRAS
Approval Number 0901504 |
|
|
Latigloss 66 H2 G/50 NAT 0003F2 and Latigloss 66 H2 G/50 NERO 3352F2. Natural and black coloured glass filled nylon materials. For hot and cold water use up to 85°C
|
|
Supplier: Lati Industria Termoplastici SpA |
|
WRAS
Approval Number 1007530 |
|
|
Nilamid A3H5G6 Black. Black coloured, injection moulded PA66 material. For use with water up to 85°C.
|
|
Supplier: Nilit Plastics Europe Srl. |
|
WRAS
Approval Number 1001515 |
|
|
Plustek PA303G6BK16. Black coloured, injection moulded polyamide 66 with 30% glass fibre. For use with hot and cold water up to 85°C.
Plustek PA7001G7BK11. Black coloured, injection moulded polyamide 66 with 35% glass fibre. For use with hot and cold water up to 85°C.
|
|
Supplier: Polyram Ram-On Industries |
|
WRAS
Approval Number 1002525 |
|
|
Plustek PB305G33BK37. Black coloured, injection moulded polyamide 6 reinforced with glass fibre. For use with hot and cold water up to 85°C.
|
|
Supplier: Polyram Ram-On Industries |
|
WRAS
Approval Number 0907506 |
|
|
Radilon A RV300RKC 106 Nat (natural coloured) and Radilon A RV300RKC 306 NER (black coloured), injection moulded, nylon material. For hot and cold water use up to 85°C.
|
|
Supplier: Radicinovacips Spa |
|
WRAS
Approval Number 0912524 |
|
|
Technyl A218W V30 natural & Technyl A218W V30 Black FA. Injection moulded polyamide 6.6 material (reinforced with 30% glass fibre). For use with water up to 85°C.
|
|
Supplier: Rhodia Polyamide Engineering Plastics |
|
WRAS
Approval Number 0903520 |
|
|
Technyl A 218W V30. Nylon material available in natural and black. For use with hot and cold water up to 85°C.
|
|
Supplier: Rhodia Polyamide Engineering Plastics |
|
WRAS
Approval Number 1108514 |
|
|
Lubricomp HAL23-BK1B619 (formerly known as Lubricomp HAL4023 - BK81955). Black coloured, injection moulded, aramid reinforced, PTFE lubricated PA11 composite. For use with water up to 23°C.
|
|
Supplier: SABIC Innovative Plastics BV |
|
WRAS
Approval Number 1002508 |
|
|
Lamigamid 1200. Yellow coloured, PA 12 nylon material manufactured by open casting. For use with cold water only.
sch |
|
Supplier: Schwartz GmbH |
|
WRAS
Approval Number 1008542 |
|
|
EC PA66-GF35 black. Black coloured, injection moulded PA66 nylon material. For use with water up to 85°C.
|
|
Supplier: Stiebel Eltron Gmbh & Co KG |
|
|
|
