Rubbers

Section 5390

Nitrile (Acrylonitrile Butadiene) - components

WRAS Approval Number 1212501

WN1743 BLK. Black coloured, injection moulded `O` rings, seals and gaskets. Shore hardness 50. Tested in-radius size 1.31mm. For use with water up to 23°C.

Supplier: Superior Seals Ltd

WRAS Approval Number 1207553

`Water Life`. Black coloured, compression moulded NBR rubber `O` ring. Shore hardness 70. Tested in-radius size 1.25mm. For use with water up to 85°C. When processing an application for a Fittings Approval incorporating this product, the in-radius tolerance rule cannot be applied, i.e. the material with a tested in-radius size of 1.25mm is the only product covered by the scope of this approval.

Supplier: Vako Seals Pvt. Ltd

WRAS Approval Number 1301500

ME0995 & ME0996. Injection moulded, black coloured NBR rubber washers, `O` rings, gaskets/seals & diaphragms. Shore hardness 40 - 90. Tested in-radii sizes between 0.2mm and 5mm. For use with water up to 85°C.

Supplier: Elastotech srl (formerly Fluorgum srl)

WRAS Approval Number 1111537

TEC N41-70 (post cure 2 hours at 140°C). Black coloured, injection moulded NBR rubber o-rings. Shore hardness 70. Tested in-radius 0.53mm and 6.1mm. For use with water up to 23°C.

Supplier: Tecnogomma International SpA

WRAS Approval Number 1112513

WN70/3 BLK. Black coloured, injection moulded NBR `O` rings, seals and gaskets. Shore hardness 70. Tested in-radius size 1.25mm. For use with water up to 60°C.

Supplier: Superior Seals Ltd

WRAS Approval Number 0810539

Rugg NBR 70. Black coloured, injection moulded NBR rubber `O` rings, seals and membranes. Shore hardness 70°. Tested in-radii sizes between 0.75 & 1.5mm. For use with water up to 60°C.

Supplier: Ruggeri Srl.

WRAS Approval Number 1304514

N5118F, N5518F, N6118F, N6518F, N7118F, N7008F, N7518F, N8118F, N8518F & N9118F. Black coloured, compression moulded `O` rings and gaskets. Shore hardnesses between 50 & 90. Tested in-radii sizes between 0.3mm & 3.5mm. For use with water up to 85°C.

Supplier: Xiamen Maifeng Seal Products Co Ltd

WRAS Approval Number 0811529

NBR 75.5/P5F (NBR 70.10-02 alternative trade name). Black coloured NBR moulded rubber `O` rings, washers and gaskets. Shore hardness 70°. Tested in radius range of 0.90mm - 11.40mm. For cold water use only.

Supplier: Angst & Pfister AG

WRAS Approval Number 0810514

0477 NBR 70. Black coloured, injection moulded NBR rubber `O` rings, seals and membranes. Shore hardness 70°. Tested in-radius range 0.75 - 1.5mm. For use with water up to 60°C.

Supplier: Ar-Tex SpA

WRAS Approval Number 1207516

70NB118s. Black coloured, compression moulded NBR rubber `O` ring. Shore hardness 70. Tested in-radius size 1.25mm. For use with water up to 23°C.

Supplier: Bode Dynamic GmbH

WRAS Approval Number 0810538

NB600H1, NB700H1 and NB800H4. Black coloured, compression moulded NBR o-rings, seals and gaskets. Shore hardness 60, 70 and 80 respectively. Tested in-radius between 0.89mm and 2.66mm. For use with water up to 85°C.

Supplier: Chi-Yih Enterprise Co Ltd

WRAS Approval Number 0811513

FX 372. Black coloured nitrile `o` rings. Tested in-radius size 1.5mm. Shore hardness 70. For use with cold-water only.

Supplier: Dichtungstechnik Wallstabe & Schneider GmbH & Co

WRAS Approval Number 0811514

70 NBR 150. Black coloured nitrile rubber `o` rings. Tested in-radius size 0.5mm. Shore hardness 70. For use with hot and cold water up to 50°C.

Supplier: Freudenberg O-Ring GmbH & Co KG

WRAS Approval Number 1109510

7PD1612. Black coloured, injection moulded o-rings and extruded NBR rubber washers. Shore hardness 70. Tested in-radius size 1.8mm. For use with water up to 23°C. 7PD1612. Black coloured, extruded NBR rubber washers. Tested in-radius size 1.4mm. Shore hardness 70. For use with water up to 60°C. 7PD1612. Black coloured, injection moulded NBR rubber `O` rings. Tested in-radius size 0.9mm. Shore hardness 70. For use with water up to 60°C.

Supplier: Hutchinson Le Joint Francais

WRAS Approval Number 0903533

01/B50NBR (shore hardness 50), 01/B60NBR (shore hardness 60), and 01/B70NBR (shore hardness 70). Black rubber gaskets, seals and `O`rings. Tested in-radius 0.75mm to 1.75mm. For cold water use only.

Supplier: LAV.EL. Gomma Srl

WRAS Approval Number 1006533

01/AA50 NBR, 01/AA60NBR, 01/AA70NBR & 01/AA80NBR. Black coloured, injection moulded NBR rubber `O` rings and gaskets. Tested in-radius size 3mm. Shore hardnesses 50-80. For use with water up to 23°C.

Supplier: LAV.EL. Gomma Srl

WRAS Approval Number 0907540

574DC black. Range of black coloured, compression moulded, HNBR seals, washers and gaskets. Tested in-radius size 1.09mm. Shore hardness 90. For use with hot and cold water up to 85°C.

Supplier: Minnesota Rubber & Plastics

WRAS Approval Number 0810536

210N. Black coloured NBR rubber material. Intended for the manufacture of `O` rings, seals and membranes. Shore hardness 70°. Tested in-radius range 0.75 - 1.5mm. For hot and cold water use up to 60°C.

Supplier: Minnesota Rubber & Plastics

WRAS Approval Number 0908519

N70N06G. Black coloured, injection moulded, NBR rubber `O` ring. Shore hardness 70. Tested in-radius size 2.00mm. For use with water up to 85°C.

Supplier: Origom S.P.A.

WRAS Approval Number 0812520

NBR-Rugg-NZW/60. Black coloured NBR rubber material used for the manufacture of membranes, seals and `O` rings by compression moulding. Shore hardness 60°. Tested in-radius of 0.75mm. Suitable for use with hot and cold water up to 85°C

Supplier: Ruggeri Srl.

WRAS Approval Number 1003522

Ruggn 70. Black coloured, compression moulded NBR `O` rings, seals and membranes. Tested in-radius 0.625mm. Shore hardness 70. For use with hot and cold water up to 85°C.

Supplier: Ruggeri Srl.

WRAS Approval Number 0906528

WN12/7/1. Black coloured, injection moulded, NBR rubber `O` rings. Tested in-radii sizes 0.89mm - 2mm. Shore hardness 70. For use with hot and cold water up to 85°C.

Supplier: Superior Seals Ltd

WRAS Approval Number 0910512

Black coloured, injection moulded HNBR components manufactured from TH 5/01/4. Tested in-radius size 1.5mm. Shore hardness 70. For use with hot and cold water up to 85°C.

Supplier: Superior Seals Ltd

WRAS Approval Number 1102503

WN60/1. Black coloured, injection moulded, NBR `O` rings, seals and gaskets. Shore hardness 60. Tested in-radius size 1.5mm. For use with water up to 85°C.

Supplier: Superior Seals Ltd

WRAS Approval Number 0811519

WRC-70. Black coloured NBR moulded rubber `O` rings, washers and gaskets. Shore hardness 70°. Tested in radius range of 0.90mm - 11.40mm. For cold water use only.

Supplier: Tecnogomma International SpA

WRAS Approval Number 0806524

N5118F, N5518F, N6118F, N6518F, N7118F, N7008F, N7518F, N8118F, N8518F N9118F, black coloured, compression moulded NBR rubber gaskets. Tested in radii sizes between 0.3mm to 3.5mm. Shore hardness between 50° and 90°. N5118F, N5518F, N6118F, N6518F, N7118F, N7008F, N7518F, N8118F, N8518F, N9118F, black coloured, compression moulded NBR rubber `O` rings. Tested in radii sizes between 0.3mm & 3.5mm. Shore hardness between 50° and 90°. For use with hot and cold water up to 85°C.

Supplier: Xiamen Maifeng Seal Products Co Ltd