Solvent Cements

Section 5560

WRAS Approval Number 1103513

Friatherm PVC-C Component Adhesive. Orange coloured solvent cement. Apply as per manufacturer`s instructions. Cure for 30 minutes at an ambient temperature (20 -22°C). For use with water up to 60°C.

Supplier: Durapipe UK

WRAS Approval Number 1210528

Weld-On Wet `R` Dry 725. Clear, liquid solvent cement. Apply as per manufacturer`s instructions. Allow to dry for 10 minutes at an ambient temperature prior to use. For use with water up to 23°C.

Supplier: IPS Corporation

WRAS Approval Number 1210530

Weld-On 719 PVCu. Clear, liquid solvent cement. Apply as per manufacturer`s instructions. Allow to dry for 10 minutes at an ambient temperature prior to use. For use with water up to 23°C.

Supplier: IPS Corporation

WRAS Approval Number 1206557

Tangit All Pressure. Grey coloured solvent cement intended to join PVC-U pipe and fittings. Apply as per manufacturer`s instructions. Cure for 20 days at 23°C. For use with water up to 23°C.

Supplier: George Fischer Sales Ltd

WRAS Approval Number 0904543

Boss PVCU Pressure Solvent Cement. Clear liquid cement intended to join pipe and fittings. Cure for 24 hours at 7°C. For use with water up to 23°C.

Supplier: BSS Group Ltd.

WRAS Approval Number 0905527

Boss ABS Pressure Solvent Cement. Grey coloured liquid cement intended to join ABS pipe and fittings. For use with water up to 23°C.

Supplier: BSS Group Ltd.

WRAS Approval Number 1301507

Evo-Stik 8944. Grey coloured ABS solvent cement. Apply as per manufacturer`s instructions. Cure for 20 days at 7°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Supplier: Bostik Ltd

WRAS Approval Number 1210529

Weld-On 724 C-PVC. Grey coloured, liquid solvent cement. Apply as per manufacturer`s instructions. Allow to dry for 10 minutes at an ambient temperature prior to use. For use with water up to 23°C.

Supplier: IPS Corporation

WRAS Approval Number 1011528

Astore PVC-U solvent cement. Clear, translucent solvent cement intended to join PVC-U pipes and fittings. Apply as per manufacturer`s instructions. Cure 24 hours at 7°C. For use with water up to 23°C.

Supplier: Astore uk

WRAS Approval Number 1010518

Griffon WDF-05. Blue tinted solvent cement intended to bond PVC pipe and fittings. Apply as per manufacturer`s instructions. Cure for 30 minutes at 12°C. For use with water up to 23°C.

Supplier: Bison International

WRAS Approval Number 0904518

Griffon UNI-100 PVC-U Solvent cement. Clear liquid cement for joining pipes and fittings. Cure for 24 hours at 7°C. Cold water use only.

Supplier: Bison International

WRAS Approval Number 0905509

B-25 ABS liquid solvent cement. Grey coloured liquid cement for joining ABS pipes and fittings. Cold water use only.

Supplier: Bison International

WRAS Approval Number 1105516

Durapipe one step ABS solvent cement. Grey solvent cement intended to join ABS pipe and fittings. For use with water up to 23°C.

Supplier: Durapipe UK

WRAS Approval Number 1011527

Durapipe One-step PVC-U solvent cement. Clear, translucent solvent cement intended to join Durapipe PVC-U pipes and fittings. Apply as per manufacturer`s instructions. Cure 24 hours at 7°C. For use with water up to 23°C.

Supplier: Durapipe UK

WRAS Approval Number 0910535

Effast Tite Blue. Blue coloured, brush applied solvent cement, intended to bond PVCu pipe and fittings. For cold water use only.

Supplier: Polypipe Terrain

WRAS Approval Number 1110515

Spears FS-5 One Step Low VOC Red CPVC Solvent Cement. Red coloured solvent cement intended to bond CPVC pipe and fittings. Apply as per manufacturer`s instructions. For use with water up to 82°C.

Supplier: Spears Manufacturing Company