Section 0060

Print Entire Section

Boilers

Catering, Feed Cistern or Pressure

WRAS Approval Number  0904051

Print this entry

EB `F` range of counter top and wall mounted, electronically heated catering water boilers. The boilers incorporate stainless steel storage tanks with silicone and EPDM gaskets fed via a solenoid valve (Invensys) flexible hose (Qualflex) and water filter (Cuno) controlled with level sensors. Water is then dispensed via (Tomlinson) draw off taps. Maximum working pressure 8.0 bar, minimum working pressure 1.0 bar.

Size: ¾" BSP.

Model: EB3F, EB4F, EB6F, EB6TF and EB3F/PB (counter top). WMB3F (wall mounted).

Marking: Lincat printed on front panel.Lincat, product and technical information printed on adhesive label attached under front panel.

Installation Requirements : R001           

Note:  

Proviso: Discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.

Manufacturer: Lincat Ltd

Factor:  

WRAS Approval Number  0902075

Print this entry

Range of counter top, electrically heated catering water boilers. The boilers incorporate stainless steel cold water feed cisterns, silicone sealant gaskets and dispensing taps (Tomlinson). The water is supplied via a flexible hose (Qualflex) and solenoid valve (Invensys). Water level is electronically controlled via level sensors. Maximum supply pressure 10.0 bar @ 100°C.

Size: ¾" BSP.

Model: AWB3, AWB6.

Marking: Parry badge on front panel. `Parry` model number and product information printed on adhesive label on body.`Parry` printed on tap handle.

Installation Requirements : R001           

Note: Discharge to drain must be via a Type `AA`, `AB` or `AD` air gap or in accordance with EN1717.

Proviso:  

Manufacturer: Parry Group Ltd.

Factor:  

WRAS Approval Number  0909050

Print this entry

`Tudor` & `Contract` ranges of under basin and over basin electrically heated catering water heaters. The heaters incorporate polypropylene water vessels (5 or 10 litre) and EPDM gaskets. Minimum working pressure 0.5 bar. Maximum working temperature 80°C.

Size: ½" BSP inlet.

Model: Tudor ll P4/52/, P4/102, P4/52UB & P4/102UB Contract ll C2/50, C2/100, C3/50 & C3/100

Marking: Model printed on front panel. Zip Heaters UK, address, model and technical information printed on adhesive label on top panel.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Zip Heaters (UK) Ltd.