|
WRAS
Approved Water Fittings
|
Cold-water storage with cover or roof - plastic, sectional |
|
Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4, of the Water Supply (Water Fittings) Regulations 1999. |
|
Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4, of the Water Supply (Water Fittings) Regulations 1999. |
|
WRAS
Approval Number
1304051 |
Print
this entry |
|
`Sekisui` insulated or un-insulated sectional cisterns assembled from glass reinforced plastic (GRP) panels. The panels are constructed in sandwich form with a layer of GRP each side. The largest capacity cisterns have stainless steel internal bracing and UPVC pole supports. The roof covers are of the same panel construction & panels with inspection hatch are provided. Joints are sealed with synthetic rubber gaskets.
Cold water use only. |
|
Size: 1000 Litres to 3,600,000 litres |
|
Model: Sekisui F range - FS (1m high), FH, FHX (1.5m high), FW, FWX, FJX (2m high), FT, FTX (2.5m high), FZ, FZX (3m high), FK, FKX (3.5m high), FQ, FQX - (4m high)
|
|
Marking: Sekisui F - Panel, model number and product information on adhesive label on panel.
MNF X0525 & a Japanese character on cover.
|
|
Installation Requirements :
R001 R270 R280 R350
|
|
Note: Inlet valve not supplied. |
|
Proviso: |
|
Manufacturer: Sekisui Aqua Systems Co Ltd |
List all fittings by this
manufacturer |
|
Factor: |
List all fittings by this factor |
|
WRAS
Approval Number
1209043 |
Print
this entry |
|
Range of hot press moulded GRP sectional, pre-insulated panels for the construction of cold water storage cisterns. Assembled panels are sealed with extruded butyl rubber. Cisterns over a certain size are fitted with stainless steel ties and UPVC roof struts. The cisterns supplied with a float operated valve. The roof is fitted with one or more sealed manhole access points.
For cold water use only.
|
|
Size: 1000 to 448,000 litres. |
|
Model: Balmoral M100. |
|
Marking: Balmoral Tanks, GRP sectional tanks, tank no, designation, installation date, dimensions, capacity, client and various logo's on side panel. Balmoral and logo on cistern lid. Balmoral tanks and contact details on panels.
|
|
Installation Requirements :
R001 R270 R280
|
|
Note: |
|
Proviso: |
|
Manufacturer: Balmoral Tanks Limited |
List all fittings by this
manufacturer |
|
Factor: |
List all fittings by this factor |
 |