Section 0275

Print Entire Section

Close Coupled Suites

Washdown pans and bidet appliances

Products within this section have been tested to the Regulator's specification for the performance of WC suites installed after 1st January 2001.

Products within this section have been tested to the Regulator's specification for the performance of WC suites installed after 1st January 2001.

WRAS Approval Number  1301002

Print this entry

`Form` close coupled W.C. suite incorporating a ceramic pan, bottom entry, delay fill float operated inlet valve and a dual flush drop valve. The drop valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Maximum working pressure 12.0 bar. For cold water use only.

Size: ½” BSP plastic inlet. 2” BSP plastic outlet. Flushing volumes: 6L full flush and 4L reduced flush or 4L full flush and 2.6L reduced flush.

Model: 'Form'.

Marking: Mondomio Group on top of pan and on right hand side of cistern

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: Mondomio Trading (UK) Ltd.

Factor:  

WRAS Approval Number  1206055

Print this entry

Decor close coupled wash down WC suite (ceramic), incorporating a bottom entry inlet valve and and dual flush outlet valve providing an AG airgap arrangement. The dual flush valve is operated via a push button assembly located on the lid of cistern. Cold water use only. Full flush volume 3.9L, reduced flush volume 2.4L. Maximum working pressure 10 bar.

Size: ½” BSP male inlet.

Model: Décor close coupled water closet p trap - DR10 & DR11

Marking: RAK Ceramics on cistern lid.

Installation Requirements : R001 R160 R280 R390     

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1203359

Print this entry

Close coupled WC suite. The cistern incorporates a bottom entry inlet valve and dual flush drop valve. The WC cistern incorporates an AC air gap.Maximum supply pressure 15.0 bar. Cold water use only.

Size: ½” BSP (M) Inlet connection

Model: Compact WC P Trap

Marking: W cast into rear of pan

Installation Requirements : R001 R280 R390 R150     

Note:  

Proviso:  

Manufacturer: Oman Ceramics Co SAOG

Factor:  

WRAS Approval Number  1301082

Print this entry

`Propelair` air flush WC suite incorporating a floor mounted back to wall ceramic pan that is factory fitted with a latch operated WC seat and a concealed cistern that incorporates a type AB air gap, side entry inlet valve, an air pump and a water pump. The WC suite has a single flush of 1.5 litres that is operated via a push button assembly. Two flow restrictors are supplied with the WC for high and low pressure cold water supply conditions. The low pressure restrictor is to be fitted when the inlet pressure is less than 4 bar and the high pressure restrictor is to be fitted when the inlet pressure is 4 bar or greater. Cold water use only. Maximum operating pressure 10 bar.

Size: ½” BSP male inlet

Model: 'Propelair' WC Suite

Marking: 'Propelair' on toilet seat and cistern lid

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: ENL Limited

Factor: Phoenix Product Development Limited

WRAS Approval Number  1109407

Print this entry

Close coupled WC suite incorporating a bottom entry float operated inlet valve and dual flush drop valve. The WC inlet valve incorporates an AC airgap. Maximum supply pressure 10 bar. Cold water use only.

Size: ½ ” BSP(m)

Model: Laura - N 4.5 / 3 WC suite (34239S WC pan with 34139U Cistern)

Marking: ROCA on cistern lid.

Installation Requirements : R001 R280         

Note:  

Proviso:  

Manufacturer: Roca Sanitario

Factor: Roca Limited

WRAS Approval Number  1212118

Print this entry

Highline close coupled wash down WC suite (ceramic). Incorporating a bottom entry inlet valve providing an ag airgap arrangement. Dual flush valve operated via a push button assembly located on the lid of cistern. Maximum working pressure 10 bar. Cold water use only.

Size: ½” BSP male inlet

Model: Highline Water Closet P-Trap- HG10 & HG11

Marking: RAK Ceramics on cistern lid

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1111089

Print this entry

`Tonique` close coupled washdown WC suite consisting of a RAK ceramic pan and cistern incorporating a bottom entry inlet valve and dual flush outlet valve providing an AG airgap arrangement. The dual flush outlet valve is operated via a push button assembly located on the lid of the cistern. Maximum working pressure 10.0 bar. Cold water use only.

Size: ½” BSP male inlet.

Model: 'Tonique' close coupled water closet 'P' Trap (TQ11 & TQ10).

Marking: RAK Ceramics on cistern lid.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1201062

Print this entry

`Infinity` close coupled wash down WC suite (ceramic) incorporating a bottom entry inlet valve and a dual flush drop type outlet valve providing an AG air gap arrangement. The actuation button for the flush is positioned on the lid of the cistern. Maximum working pressure 10.0 bar. Cold water use only.

Size: ½” BSP male inlet.

Model: Infinity close Coupled Back to Wall Water Closet ‘P’ Trap.

Marking: RAK Ceramics on cistern lid.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1201063

Print this entry

Reserva wall hung WC consisting of a ceramic pan and concealed cistern, incorporating a side entry inlet valve and dual flush outlet valve providing a type AG airgap arrangement. Outlet valve is operated via a dual push button assembly located at the front of the cistern. Maximum working pressure 10.0 bar. Cold water use only.

Size: 3/8” BSP captive nut inlet.

Model: Reserva wall Hung Water Closet ‘P’ Trap.

Marking: RAK Ceramics on pan

Installation Requirements : R001 R160 R280 R390     

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1201065

Print this entry

`Rondo` close coupled wash down WC suite (ceramic) incorporating a bottom entry inlet valve and a dual flush drop valve providing an AG Airgap arrangement. The dual flush outlet valve is operated via a push button assembly located on the lid of cistern. Maximum working pressure 10.0 bar. Cold water use only.

Size: ½” BSP male inlet.

Model: Rondo Water Closet `P` Trap.

Marking: RAK inside cistern lid.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1201067

Print this entry

Metropolitan Deluxe close coupled wash down WC suite (ceramic) incorporating a bottom entry inlet valve and dual flush outlet valve providing an AG airgap arrangement. Outlet valve is operated via a push button assembly located on the lid of cistern. Maximum working pressure 10.0 bar. Cold water use only.

Size: ½” BSP male inlet.

Model: Metropolitan Deluxe WC `P` Trap.

Marking: RAK Ceramics on cistern lid.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1201069

Print this entry

Hello close coupled wash down WC Suite (ceramic) incorporating a bottom entry inlet valve and dual flush outlet valve providing an AG airgap arrangement. Dual flush valve is operated via a push button assembly located on the lid of cistern. Maximum working pressure 10.0 bar. Cold water use only.

Size: ½” BSP male inlet.

Model: Hello close coupled WC `P` Trap.

Marking: RAK Ceramics on cistern lid.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1109409

Print this entry

Close coupled WC suite incorporating a bottom entry float operated inlet valve and dual flush drop valve. The WC inlet valve incorporates an anti vacuum device. Maximum supply pressure 10 bar. Cold water use only.

Size: ½ ” BSP(m)

Model: Dama senso compact - N 4.5/3 Wc suite (34251S WC pan with 34151D Cistern)

Marking: ROCA on cistern lid.

Installation Requirements : R001 R280         

Note:  

Proviso:  

Manufacturer: Roca Sanitario

Factor: Roca Limited

WRAS Approval Number  1212115

Print this entry

Clancy close coupled wash down wc suite (ceramic) incorporating a bottom entry inlet valve providing an AG airgap arrangement. Dual flush valve operated via a push button assembly located on the lid of cistern. Maximum working pressure 10.0 bar. Cold water use only.

Size: ½” BSP male inlet

Model: Clancy Close Coupled Back To Wall WC P-Trap- CY 11 RAK, CY 10 RAK

Marking: RAK Ceramics on cistern lid

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1212116

Print this entry

Compact deluxe close coupled wash down WC suite (ceramic) incorporating a bottom entry inlet valve providing an AG airgap arrangement. Dual flush valve operated via a push button assembly located on the lid of cistern. Maximum working pressure 10 bar. Cold water use only.

Size: ½” BSP male inlets.

Model: Compact Deluxe Rimless Close Coupled Back To Wall WC P-Trap- CO 26 RAK, CO 10 RAK

Marking: RAK Ceramics on cistern lid

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1210083

Print this entry

`icare Doc M` close coupled W.C. suite (ceramic) incorporating a servo assisted, diaphragm type float operated inlet valve and a height adjustable flushing siphon. The flush is operated by a lever. Maximum working pressure 12.0 bar. Cold water use only.

Size: ½” BSP inlet. 1½” BSP outlet. Flushing volumes 6 litres.

Model: icare Doc M.

Marking: Mondomio Group on top of pan and on right hand side of cistern

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: Mondomio Trading (UK) Ltd.

Factor:  

WRAS Approval Number  1210082

Print this entry

`icare Doc M` close coupled W.C. Suite (ceramic) incorporating a servo assisted, diaphragm type float operated inlet valve and a dual flush outlet valve. The flush is mechanically operated by a cable operated button. Maximum working pressure 12.0 bar. Cold water use only.

Size: ½” BSP inlet. 2” BSP outlet. Flushing volume 6 Litres.

Model: icare Doc M.

Marking: Mondomio on top of pan and on right hand side of cistern

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: Mondomio Trading (UK) Ltd.

Factor:  

WRAS Approval Number  1109408

Print this entry

Close coupled WC suite incorporating a bottom entry float operated inlet valve and dual flush drop valve. The WC inlet valve incorporates an anti vacuum device. Maximum supply pressure 10 bar. Cold water use only.

Size: ½ ” BSP(m)

Model: Hall - N 4.5 / 3 WC suite ((34262S) WC pan with 34162D Cistern)

Marking: ROCA on cistern lid and side of pan.

Installation Requirements : R001 R280         

Note:  

Proviso:  

Manufacturer: Roca Sanitario

Factor: Roca Limited

WRAS Approval Number  1212117

Print this entry

Compact Deluxe Wall Hung W.C. P-Trap Water closet consisting of a RAK ceramic pan and concealed cistern, incorporating a side entry inlet valve providing an AG airgap arrangement. Outlet valve (dual flush) is operated via a cable operated push button assembly. Maximum working pressure 10.3 bar. Cold water use only.

Size: ?” BSP male inlet

Model: Compact Deluxe Wall Hung CO 13

Marking: RAK ceramics on cistern and pan

Installation Requirements : R001 R160 R280 R390     

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1207086

Print this entry

Ifo Cera ES4 3876 back to wall single flush W.C. suite, incorporating a ceramic pan (model 3876), a servo assisted, side entry, float operated inlet valve (model B610) and a siphonic outlet valve (model Turbo 88R). The flush is operated by a lever.

Size: ½” BSP inlet & 1½” outlet. Flushing volume 4 litres.

Model: Ifo Cera ES4 3876 back to wall single flush W.C. suite.

Marking: Ifo on pan, Dudley on cistern.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: Thomas Dudley Limited

Factor: Green Building Store

WRAS Approval Number  1207085

Print this entry

Ifo Sign ES4 6875 wall hung, single flush, W.C. suite, incorporating a ceramic pan (model 6875), a servo assisted, side entry, float operated inlet valve (model B610) and a siphonic outlet valve (model Turbo 88R). The flush is operated by a lever.

Size: ½” BSP inlet & 1½” outlet. Flushing volume 4 litres.

Model: Ifo Sign ES4 6875 wall hung, single flush, W.C. suite

Marking: Ifo on pan, Dudley on cistern.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: Thomas Dudley Limited

Factor: Green Building Store

WRAS Approval Number  1203074

Print this entry

‘Credenza` close coupled wash down WC suite (ceramic) incorporating a bottom entry inlet valve and dual flush outlet valve providing an AG airgap arrangement. Outlet valve is operated via a push button assembly located on the lid of the cistern. Maximum working pressure 10.0 bar. Cold water use only.

Size: ½” BSP male inlet.

Model: Credenza water closet `P` trap close coupled wash down water closet.

Marking: RAK Ceramics on cistern lid

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1203072

Print this entry

Compact close coupled wash down WC Suite (ceramic) incorporating a bottom entry inlet valve and dual flush valve outlet valve providing an AG airgap arrangement. Flush valve is operated via a push button assembly located on the lid of cistern. Maximum working pressure 10.0 bar. Cold water use only.

Size: ½” BSP male inlet.

Model: Compact Water Closet ‘P’ Trap.

Marking: RAK Ceramics on cistern lid.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1109405

Print this entry

Close coupled WC suite incorporating a bottom entry float operated inlet valve and dual flush drop valve. The WC inlet valve incorporates an AC airgap. Maximum supply pressure 10 bar. Cold water use only.

Size: ½ ” BSP(m)

Model: Meridian - N 4.5 / 3 Wc suite (9 342247 WC pan with 34147C Cistern)

Marking: ROCA on cistern lid.

Installation Requirements : R001 R280         

Note:  

Proviso:  

Manufacturer: Roca Sanitario

Factor: Roca Limited

WRAS Approval Number  1109406

Print this entry

Close coupled WC suite incorporating a bottom entry float operated inlet valve and dual flush drop valve. The WC inlet valve incorporates an anti vacuum device. Maximum supply pressure 10 bar. Cold water use only.

Size: ½ ” BSP(m)

Model: The Gap - N 4.5 / 3 (342477 WC pan with 34147C Cistern)

Marking: ROCA on cistern lid.

Installation Requirements : R001 R280         

Note:  

Proviso:  

Manufacturer: Roca Sanitario

Factor: Roca Limited

WRAS Approval Number  1105349

Print this entry

Concealed dual flushing cistern and ceramic pan. The cistern incorporates an inlet valve, dual flush outlet valve and AC airgap. The flush volume is operated by a two push button assembly. Servicing valve and flexible stainless steel braided hose assembly incorporated with the cistern casing. For use with cold water only.

Size: 3.7 L reduced flush volume & 6 L full flush volume.

Model: Mepa cistern A31 & Kolo pan.

Marking: MEPA A31 on cistern KOLO on WC pan

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer:  

Factor: Accora Ltd

WRAS Approval Number  1106337

Print this entry

Concealed dual flushing cistern and wall mounted ceramic pan. The cistern incorporates an AC airgap. The flush volume will be operated by a two button push button assembly. Servicing valve and flexible stainless steel braided hose assembly incorporated with the cistern casing.

Size: 3.8 L reduced flush volume. 6 L full flush volume.

Model: Mepa cistern A31 and Lecico WC Pan Madison

Marking: MEPA A31 on cistern and the letter L on pan

Installation Requirements : R001 R150         

Note:  

Proviso:  

Manufacturer:  

Factor: Accora Ltd

WRAS Approval Number  0809028

Print this entry

(6 litre single flush) DVS Anti-Vandal WC pan with a polyethylene concealed cistern incorporating a Torbeck inlet valve controlling the flow and a Dart Valley Systems electrically operated drop valve on the outlet which incorporates an internal overflow. Flush is operated via a sensor situated on the front panel.

Size: ½" BSP inlet.

Model: 6 litre single flush. D800/WCP Range High security WC pan. Disabled high security WC pan. Custodial WC pan. Anti vandal WC pan. Safe ensuite WC pan.

Marking: DVS, company details printed on data plate on front panel.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Dart Valley Systems Ltd

Factor:  

WRAS Approval Number  1106064

Print this entry

Close coupled WC suite. The cistern incorporates a bottom entry inlet valve and dual flush drop valve. The WC inlet valve incorporates an AC air gap (suitable for backflow protection up to fluid category 3). Maximum supply pressure 12.5 bar. Cold water use only.

Size: ½” BSP inlet

Model: AKW-460S

Marking: AKW on pan and cistern lid.

Installation Requirements : R001 R280         

Note:  

Proviso:  

Manufacturer:  

Factor: DLP Limited

WRAS Approval Number  1106063

Print this entry

Close coupled WC suite. The cistern incorporates a bottom entry inlet valve and dual flush drop valve. The WC inlet valve incorporates an AC air gap (suitable for backflow protection up to fluid category 3). Maximum supply pressure 12.5 bar. Cold water use only.

Size: ½” BSP inlet

Model: AKW-460L

Marking: AKW on pan and cistern lid.

Installation Requirements : R001 R280         

Note:  

Proviso:  

Manufacturer:  

Factor: DLP Limited

WRAS Approval Number  1004043

Print this entry

`Geberit` dual flush low level concealed WC plastic flushing cistern with a Geberit `Impuls380` inlet valve and Geberit dual flush outlet valve. The outlet valve is operated via a push button assembly. Inlet incorporates an isolating valve and stainless steel braided hose supplying the inlet valve. Maximum working pressure 10.0 bar.

Size: ½" BSP inlet, 4 and 6 litre flush.

Model: Geberit UP320 109.309.00.5.

Marking: Geberit, model number, product information printed on adhesive label inside cistern. Geberit printed on operating panel

Installation Requirements : R001 R160         

Note:  

Proviso:  

Manufacturer: Geberit AG

Factor: Geberit Sales Limited

WRAS Approval Number  1109411

Print this entry

Close coupled WC suite. The cistern incorporates a bottom entry inlet valve and dual flush drop valve. The WC inlet valve incorporates an AC air gap. The bidet seat is controlled by a solenoid valve which supplies water via an `AB` airgap. Maximum supply pressure 10.0 bar. Cold water use only.

Size: ?” BSP (F) Captive nut

Model: Geberit AquaClean 8000 plus AP

Marking: Geberit on side panel.

Installation Requirements : R001 R150 R280       

Note: This appliance incorporates a fluid category 5 backflow prevention device

Proviso:  

Manufacturer: Geberit International AG

Factor: Geberit Sales Limited

WRAS Approval Number  0902097

Print this entry

`Contour 21` BTW rimless washdown pan (ceramic) fed via a Dart Valley concealed polyethylene cistern listing number 0609122.

Size: 4.5 litres.

Model: Contour 21 BTW rimless WC suite.

Marking: Pan, `Armitage Shanks` logo and S3056 marking on rear. Cistern - `DVS` marking.

Installation Requirements : R001 R280         

Note:  

Proviso:  

Manufacturer: Ideal Standard International

Factor:  

WRAS Approval Number  1009071

Print this entry

Mondomio Group `sm-ART` Close Coupled W.C. Suite (ceramic), incorporating a Lab B228 dual flush 2” outlet valve and a Lab A206/A207 servo assisted diaphragm type float operated inlet valve. The flush volume is mechanically operated by a cable operated dual flush button.

Size: ½” BSP Inlet & 2” BSP outlet. Flushing volumes: 4 & 2.6 litres.

Model: Mondomio sm-ART Close Coupled W.C. Suite

Marking: Mondomio Group glazed on top of pan and on right hand side of cistern.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: Mondomio Group

Factor:  

WRAS Approval Number  0806041

Print this entry

`sm-ART` close coupled 6 Litre dual flush wash down WC suite (ceramic) with bottom entry, LAB part 4 inlet valve and LAB dual flush outlet valve. The actuating device incorporates two buttons which has a readily discernible method of identifying the dual flush mechanism and is positioned in the lid of the cistern.

Size:  

Model: Mondomio Group sm-ART close coupled suite.

Marking: Mondomio Group on both sides of pan and on side of cistern.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Mondomio Group

Factor:  

WRAS Approval Number  0907323

Print this entry

`EXPERT` concealed dual flushing cistern (Plastic) incorporating Oliveira & Irmao inlet and outlet valves and an AC airgap. The flush is operated by a two button control panel situated on the flushing cistern.

Size: 3/8" plastic shank.

Model: Expert Concealed Dual Flush Flushing Cistern.

Marking: Manufacturer’s logo printed on control panel on cistern.

Installation Requirements : R001 R150 R280 R390     

Note:  

Proviso:  

Manufacturer: Oliveira & Irmão, S.A.

Factor:  

WRAS Approval Number  1004047

Print this entry

WC Suite comprising of a R.A.K ceramic pan and concealed cistern (WDI) which incorporates an inlet valve (WDI) and dual flush outlet valve (WDI) forming a type AG airgap arrangement. Maximum working pressure 10.3 bar.

Size: ½" BSP inlet.

Model: Special Needs water closet `P` trap 450mm.

Marking: RAK Ceramics printed onto pan.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1106052

Print this entry

WC wash down ceramic pan and concealed cistern incorporating a side entry inlet valve and dual flush outlet valve providing a type AG airgap arrangement. Outlet valve is operated via a cable operated push button assembly. Maximum operating pressure 10.0 bar. Cold water use only.

Size: 3/8” BSP male inlet.

Model: Series 600 Back to Wall Closet `P` - trap.

Marking: RAK ceramics on pan. RAK Ceramics Ltd on cistern.

Installation Requirements : R001 R160 R280 R390     

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1004048

Print this entry

WC Suite comprising of a R.A.K ceramic pan and concealed cistern (WDI) which incorporates an inlet valve (WDI) and dual flush outlet valve (WDI) forming a type AG airgap arrangement. Maximum working pressure 10.3 bar.

Size: ½" BSP inlet.

Model: Special Needs water closet `P` trap 480mm.

Marking: RAK Ceramics printed onto pan.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1106049

Print this entry

Series 600 close coupled washdown WC suite consisting of a RAK Ceramic pan and cistern. Incorporating a bottom entry inlet valve and dual flush outlet valve, providing a Type AG airgap arrangement. Outlet valve is operated via a push button assembly located on the lid of the cistern. Maximum working pressure 10.0 bar. Cold water use only.

Size: ½” BSP male inlet.

Model: Series 600 water closet `P` trap close coupled.

Marking: RAK Ceramics on cistern lid.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1106050

Print this entry

Summit close coupled washdown WC suite consisting of a RAK Ceramic pan and cistern incorporating a bottom entry inlet valve and dual flush outlet valve providing a Type AG airgap arrangement. Outlet valve is operated via a push button assembly located on the lid of the cistern. Maximum working pressure 10.0 bar. Cold water use only.

Size: ½” BSP male inlet.

Model: Summit Water closet `P` trap.

Marking: RAK Ceramics on cistern lid.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1106051

Print this entry

WC washdown ceramic pan and concealed cistern. Incorporating a side entry inlet valve and dual flush outlet valve providing a type AG airgap arrangement. Outlet valve is operated via a cable operated push button assembly. Maximum operating pressure 10 bar. Cold water use only.

Size: 3/8” BSP male inlet.

Model: Summit back to wall water closet `P` trap.

Marking: RAK Ceramics on pan. RAK Ceramics Ltd on cistern.

Installation Requirements : R001 R160 R280 R390     

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1111084

Print this entry

`Compact` close coupled washdown WC suite consisting of a RAK ceramic pan and cistern incorporating a bottom entry inlet valve and dual flush outlet valve providing an AG airgap arrangement. The flush valve is operated via a two push button assembly located on the lid of the cistern. Cold water use only. Maximum operating pressure 10.0 bar.

Size: ½” BSP male inlet.

Model: Compact Rimless water closet `P` trap (C022 & C010)

Marking: RAK Ceramics on cistern lid.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1111088

Print this entry

`Opulence` close coupled `back to wall` washdown WC suite consisting of a RAK ceramic pan and cistern incorporating a bottom entry inlet valve and dual flush outlet valve providing a type AG airgap arrangement. The dual flush valve is operated via a push button assembly located on the lid of the cistern. 700 x 450mm. Cold water use only. Maximum working pressure 10.0 bar.

Size: ½” BSP male inlet.

Model: ‘Opulence’ Water Closet P Trap. (OP11 & OP10)

Marking: RAK Ceramics on cistern cover.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1111083

Print this entry

`Opulence` WC washdown ceramic pan and concealed cistern incorporating a side entry inlet valve and dual flush outlet providing a Type AG air gap arrangement. The dual flush valve is operated via a two push button assembly. Cold water use only. Maximum operating pressure 16.0 bar.

Size: 3/8” BSP male inlet.

Model: `Opulence` back to wall WC `P` trap (Model OP16).

Marking: RAK Ceramics on pan.

Installation Requirements : R001 R160 R280 R390     

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1106048

Print this entry

Close coupled washdown WC suite consisting of a RAK Ceramic pan and cistern, incorporating a bottom entry inlet valve dual flush outlet valve, providing a Type AG airgap arrangement. Outlet valve is operated via a push button assembly located on the lid of cistern. Maximum working pressure 10.0 bar. Cold water use only.

Size: ½” BSP male inlet.

Model: RJA/BQ/1 water closet `P` trap.

Marking: RAK Ceramics on cistern lid.

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: RAK Ceramics

Factor:  

WRAS Approval Number  1001041

Print this entry

Mondomio Group "sm-ART" Back to Wall W.C. Pan (Ceramic) coupled with a Thomas Dudley "Vantage" dual flush 6/4 litre concealed cistern (plastic) incorporating a "Niagara" dual flush 2" Outlet Valve and a "Hydroflo" servo assisted diaphragm type float operated Inlet valve, the flush volume is pneumatically operated by a dual function button.

Size: "A" BSP Plastic Inlet, 2" BSP Plastic Outlet, Flushing Volumes 6/4 Litres

Model: Mondomio sm-ART Back to Wall W.C. Pan and Thomas Dudley Vantage Dual Flush 6/4 Litre Concealed Cistern

Marking: Mondomio Group glazed on top of Pan TD marked on two cistern inspection covers top and front

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer:  

Factor: Thomas Dudley Limited

WRAS Approval Number  1102090

Print this entry

Mondomio Group “sm-ART” wall hung W.C. Pan (Ceramic) coupled with a Thomas Dudley “Vantage” dual flush 6/4, 4/2.6 litre concealed cistern (plastic) incorporating a “Niagara” dual flush 2” outlet valve and a “Hydroflo” servo assisted diaphragm type float operated inlet valve. The flush volume is pneumatically operated by a dual function button.

Size: ½” BSP Plastic Inlet, 2” BSP Plastic Outlet, Flushing Volumes 6/4, 4/2.6 Litres

Model: Mondomio sm-ART Wall Hung W.C. Pan and Thomas Dudley Vantage Dual Flush 6/4, 4/2.6 Litre Concealed Cistern

Marking: Mondomio Group glazed on top of Pan TD marked on two cistern inspection covers top and front

Installation Requirements : R001 R280 R390       

Note:  

Proviso:  

Manufacturer: Thomas Dudley Limited

Factor: