|
WRAS
Approved Water Fittings
|
Single hole, metal single outlet, hose outlet |
|
Combination tap assemblies which include a flexible spray hose, when installed in sinks in domestic premises, are permitted to be supplied directly from the supply pipe provided (i) the most serious backflow risk for the spray hose outlet arises solely from the presence of the sink and (ii) the spray hose is fitted with a self-closing flow control mechanism and (iii) the hot and cold water inlets to the tap assembly include a double check valve.
If these conditions are not met or if the tap is installed other than in sinks in domestic premsies, the assembly must be fed via an air gap providing backflow protection to Fluid Category 5. A separate drinking water tap providing wholesome water may also be required. |
|
Combination tap assemblies which include a flexible spray hose, when installed in sinks in domestic premises, are permitted to be supplied directly from the supply pipe provided (i) the most serious backflow risk for the spray hose outlet arises solely from the presence of the sink and (ii) the spray hose is fitted with a self-closing flow control mechanism and (iii) the hot and cold water inlets to the tap assembly include a double check valve.
If these conditions are not met or if the tap is installed other than in sinks in domestic premsies, the assembly must be fed via an air gap providing backflow protection to Fluid Category 5. A separate drinking water tap providing wholesome water may also be required. |
|
WRAS
Approval Number
0904303 |
 Print
this entry |
|
Single hole, single outlet (swivel spout) combination tap assembly (chromium plated brass) with ceramic cartridge headwork`s and single lever operating member. The spout incorporates a pull-out spray handset with flexible hose, optional spray outlet.
|
|
Size: ½" BSP flexible hoses. |
|
Model: LI-UK-T 800
|
|
Marking: C-TECH-I etched into operating member. |
|
Installation Requirements :
R001 R100
|
|
Note: |
|
Proviso: |
|
Manufacturer: |
List all fittings by this
manufacturer |
|
Factor: C-Tech-I Inc |
List all fittings by this factor |
|
WRAS
Approval Number
0807310 |
Print
this entry |
|
`Élmira` single hole, single outlet (swivel spout) combination tap assembly (chromium plated brass) with ceramic cartridge type headworks and lever operating member (chromium plated brass). The spout incorporates an incorporates a pull out spray handset with flexible hose. The spout nozzle incorporates a plastic aerator. Maximum working pressure 5.0 bar.
|
|
Size: 15mm copper tails.
|
|
Model: Elmira.
|
|
Marking: SMR etched into operating lever.
|
|
Installation Requirements :
R001 R010 R090
|
|
Note: |
|
Proviso: |
|
Manufacturer: San Marco Rubinetteria Srl |
List all fittings by this
manufacturer |
|
Factor: Gessi Spa |
List all fittings by this factor |
|
WRAS
Approval Number
0907043 |
Print
this entry |
|
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with ¼ turn ceramic disc headworks and single lever operating members (chromium plated brass). The spout outlet incorporates a plastic aerator and the taps are supplied with brass backnuts and a flexible wash-down spray attachment.
|
|
Size: 3/8" BSP inlet.
|
|
Model: UK-1DP00, UK-1DP-A, UK-1DP00-L, UK-1DP00-LA, UK-2DP00, UK-2DP00-A, UK-2DP00-L & UK-2DP00-LA.
|
|
Marking: T and S cast into operating members.T and S brass stamped into body. |
|
Installation Requirements :
R001 R010 R040
|
|
Note: |
|
Proviso: |
|
Manufacturer: T and S Brass and Bronze Works Inc |
List all fittings by this
manufacturer |
|
Factor: |
List all fittings by this factor |
 |
