Section 0470

Print Entire Section

Combination Tap Assemblies

Single hole, metal, single outlet, swivel

Combination tap assemblies which include a flexible spray hose, when installed in sinks in domestic premises, are permitted to be supplied directly from the supply pipe provided (i) the most serious backflow risk for the spray hose outlet arises solely from the presence of the sink and (ii) the spray hose is fitted with a self-closing flow control mechanism and (iii) the hot and cold water inlets to the tap assembly include a double check valve. If these conditions are not met or if the tap is installed other than in sinks in domestic premises, the assembly must be fed via an air gap providing backflow protection to Fluid Category 5. A separate drinking water tap providing wholesome water may also be required.

Combination tap assemblies which include a flexible spray hose, when installed in sinks in domestic premises, are permitted to be supplied directly from the supply pipe provided (i) the most serious backflow risk for the spray hose outlet arises solely from the presence of the sink and (ii) the spray hose is fitted with a self-closing flow control mechanism and (iii) the hot and cold water inlets to the tap assembly include a double check valve. If these conditions are not met or if the tap is installed other than in sinks in domestic premises, the assembly must be fed via an air gap providing backflow protection to Fluid Category 5. A separate drinking water tap providing wholesome water may also be required.

WRAS Approval Number  0812338

Print this entry

Range of single hole, single outlet (swivel spout) combination tap assembly (chromium plated brass) with ceramic cartridge type headworks and lever operating member (chromium plated brass). The spout nozzle incorporates a plastic aerator. Maximum working pressure 5.0 bar.

Size: 15mm copper tails or stainless steel braided hose assembly ½” BSP (M).

Model: TAF1.

Marking: ABAF10411 on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: AGA Rangemaster Leisure

WRAS Approval Number  1112302

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 15 mm copper tails

Model: CDG03T0005

Marking: Avonflow on body

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop up waste

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1304008

Print this entry

`RIVAL` single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork and cross top operating members. The spout outlet incorporates a plastic flow straightener and product is supplied with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Size: 15mm copper tail

Model: PK385 - Rival mono basin.

Marking: Twyford on body

Installation Requirements : R001 R006 R010       

Note: No testing performed on the pop up waste.

Proviso:  

Manufacturer:  

Factor: Twyford Bathrooms

WRAS Approval Number  1201014

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork`s and cross top operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with a pop type pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: 15mm copper tail inlets.

Model: KRI305 – Kristal.

Marking: UF on headwork’s and HR on operating members.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Ultra Finishing Ltd

Factor:  

WRAS Approval Number  1112303

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 15 mm copper tails

Model: CDG10T0006

Marking: Avonflow on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1112304

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and sliding operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 65°C.

Size: Stainless steel braided PEX lined hose assembly incorporating ½” BSP captive nut end connections.

Model: Damixa 72000 G-Type V3-0 mono kitchen mixer

Marking: Damixa GNESS GROUP on operating member

Installation Requirements : R001 R006 R010       

Note: Inlet connection hoses must be installed where light is excluded.

Proviso:  

Manufacturer: Damixa ApS

Factor:  

WRAS Approval Number  1112310

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 70°C

Size: Stainless steel braided PEX lined hose assembly with 3/8” captive nut.

Model: Grohe Eurodisc Cosmopolitan 23.054.002

Marking: Grohe on body

Installation Requirements : R001 R006 R010       

Note: Inlet connection hoses must be installed where light is excluded.

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1212319

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge type headwork and single lever operating members. The spout outlet incorporates a plastic flow straightener & the inlet hose connections incorporate a check valve cartridge. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel braided EPDM lined hose assembly incorporating ½” BSP captive nut end connections.

Model: KL116DNC

Marking: 'KL116' on body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer:  

Factor: Crosswater Holdings Ltd

WRAS Approval Number  0910330

Print this entry

Single hole, single outlet (swivel spout) combination tap assembly (chromium plated brass) with ceramic cartridge type headwork and lever operating member (chromium plated brass). The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar.

Size: Stainless steel braided hose assembly ½” BSP (M).

Model: TAR1.

Marking: SMR on headwork.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: AGA Rangemaster Leisure

WRAS Approval Number  1210302

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel, PEX lined hose assembly with 3/8” captive nuts

Model: Hansgrohe Focus 31 820 000

Marking: Hansgrohe on body

Installation Requirements : R001 R006 R010       

Note: Hoses to be installed where light is excluded

Proviso:  

Manufacturer:  

Factor: Hansgrohe SE

WRAS Approval Number  1109307

Print this entry

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Model 32 084 000 Hansgrohe Talis S2 is supplied with a pop-up waste. Maximum working pressure 10 bar & maximum operating temperature 70°C.

Size: Stainless steel, PEX lined hose assembly with a 3/8” BSP (m) captive nut.

Model: 32 082 000 Hansgrohe Talis S2 & 32 084 000 Hansgrohe Talis S2.

Marking: Hansgrohe on body

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop-up waste.

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1201310

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and slide operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 65ºC.

Size: Stainless steel braided PEX lined hose assembly incorporating ½” BSP captive nut end connections.

Model: Damixa 72820 G-Type V3-0 mono basin mixer

Marking: Damixa GNESS GROMP on operating members.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Damixa ApS

Factor:  

WRAS Approval Number  1201311

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks, and cross top operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 15 mm Copper tails

Model: FS2AC101

Marking: Globe Union on body

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop-up waste

Proviso:  

Manufacturer: Shen Zhen Globe Union Industrial Corp

Factor: Globe Union Industrial Corp

WRAS Approval Number  1112308

Print this entry

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste or chain stay. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Size: Supplied with either copper tails or stainless steel braided EPDM lined hose assembly incorporating ?” BSP captive nut end connections.

Model: Art 005347 - Base model for Proxima single lever supplied with copper tails. 40511410 with Proxima mix Short Lever 40534710 with Long Lever. 40511910 with Long Lever 2 PZ. Art 005016 - Base model for Manhattan single lever supplied with flexible hoses: 40511510 with Manhattan Mix Short Lever. 40501610 with Long Lever. 40511810 with Long Lever 2 PZ.

Marking: Palazzani on short lever. Palazzani on indice of long lever.

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop up waste

Proviso:  

Manufacturer: Palazzani Rubinetteria Spa

Factor:  

WRAS Approval Number  1203024

Print this entry

Range of single hole, single outlet swivel combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork’s and single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connection.

Model: 8000-0010 and 8020-0010.

Marking: FM Mattsson on operating members.

Installation Requirements : R001 R006 R010       

Note: Inlet connection hoses must be installed where light is excluded.

Proviso:  

Manufacturer: Ostnor AB

Factor:  

WRAS Approval Number  1011333

Print this entry

Single hole, metal, single outlet (swivel) combination tap assembly (brushed nickel brass), with ceramic cartridge headwork and single lever operating members. Maximum working pressure 6.0 bar & maximum operating temperature 85°C.

Size: ½" BSP (F) Captive Nut (stainless steel braided hose assembly).

Model: Amur (Reg 25) Single Lever Monobloc Kitchen Mixer.

Marking: Reginox on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Reginox UK Ltd.

WRAS Approval Number  1203031

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C

Size: Stainless Steel braided, PEX lined hose assembly incorporating 3/8” BSP captive nut end connection.

Model: 31 087 000 – Hansgrohe Metris E2 basin mixer

Marking: ‘Hansgrohe’ on body and spout outlet.

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop-up waste.Inlet connection hoses must be installed where light is excluded.

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1112039

Print this entry

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided EPDM lined hose assembly incorporating 3/8” BSP captive nut end connections.

Model: 14 041 000 Hansgrohe Sportive 2 basin mixer. 31 710 000 Hansgrohe Focus S basin mixer. 32 072 000 Hansgrohe Talis S basin mixer.

Marking: Hansgrohe and serial numbers on body.

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop up waste.

Proviso: Inlet connection hoses must be installed where light is excluded.

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1206314

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic cartridge headwork and single lever operating members. Both inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2). The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel, EPDM lined hose assembly with 1/2” BSP (M) end connection.

Model: MC5T

Marking: Indesit logo on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Gessi Spa

Factor: Indesit Company SpA

WRAS Approval Number  0910332

Print this entry

Single hole, single outlet (swivel) combination tap assembly (brushed nickel brass) with ceramic cartridge type headworks and lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6 bar.

Size: ½” BSP Captive nut.

Model: Hudson (Reg 24) Tall Single Lever Monobloc Kitchen Sink Mixer.

Marking: Reginox on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Reginox UK Ltd.

WRAS Approval Number  1203087

Print this entry

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic discs or non-rising spindle headworks and single lever, dome or cross top operating members. Spout outlets incorporate plastic or stainless steel aerators. Models: SPT30 - `SP Harwood`, SPT70 - `SupaPlumb Beck`, SPT35 - `SP Sienna`, SPT15 - `SP Deanes`, SPT20 - `SP Rhodes` & SPT55 - `SP Murano` Maximum Working Pressure 10.0 bar. Maximum Operating Temperature 85°C.

Size: SPT30 & SPT35 (EPDM lined hose assemblies with 1/2" BSP captive nut end connections). SPT15, SPT20, SPT55 & SPT70 (15mm copper tails).

Model: 1/4 turn ceramic disc headwork SPT20, SPT30, SPT35, SPT55 & SPT70 Non-rising spindle headwork SPT15

Marking: 'Gaobo' on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Stax Trade Centres plc

WRAS Approval Number  1206311

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener. Both inlets are incorporate single check valve cartridges (suitable for backflow protection against fluid category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel, EPDM lined hose assemblies with M10 x 1 end connection

Model: MX1B

Marking: Indesit logo on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Gessi Spa

Factor: Indesit Company SpA

WRAS Approval Number  1301316

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener & both inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 55?C.

Size: 15 mm copper tails.

Model: Blanco Peak BM/4700, Blanco Peak BM/4706 & Blanco Peak BM/4717

Marking: Blanco on operating member

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Blanco Limited

WRAS Approval Number  1206312

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: 15 mm copper tails

Model: MC1B

Marking: Indesit logo on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Gessi Spa

Factor: Indesit Company SpA

WRAS Approval Number  1206313

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. Both inlets are incorporate single check valve cartridges (suitable for backflow protection against fluid category 2). The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel, EPDM lined hose assembly with ½” BSP (M) end connection.

Model: MC2B

Marking: Indesit logo on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Gessi Spa

Factor: Indesit Company SpA

WRAS Approval Number  1305020

Print this entry

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided PEX lined hose assemblies with 10mm spigot end connections.

Model: 33.800.790 & 33.800.791.

Marking: Dornbracht on body

Installation Requirements : R001 R006 R009 R010     

Note:  

Proviso:  

Manufacturer:  

Factor: Aloys F Dornbracht GmbH & Co KG

WRAS Approval Number  1105362

Print this entry

Single hole, metal single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter ceramic disc headwork`s and lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a `click` type pop-up waste. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections

Model: 12-011-059

Marking: AKW on body.

Installation Requirements : R001 R006 R010       

Note: Testing has been performed on 'click' type pop-up waste.

Proviso:  

Manufacturer:  

Factor: DLP Limited

WRAS Approval Number  1204007

Print this entry

`Concetto` single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: Stainless steel braided PEX lined hose assembly with 3/8” BSP captive nut end connections.

Model: Concetto 32.629.001.

Marking: Grohe on body

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop up waste.

Proviso: Inlet connection hoses must be installed where light is excluded.

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1206315

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: 15 mm copper tails

Model: MC3BC

Marking: Indesit logo on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Gessi Spa

Factor: Indesit Company SpA

WRAS Approval Number  1206316

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. Both inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2). The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel, EPDM lined hose assembly with 1/2” BSP (M) end connection.

Model: MX2L

Marking: Indesit logo on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Gessi Spa

Factor: Indesit Company SpA

WRAS Approval Number  1212052

Print this entry

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic disc headworks and cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Size: Stainless steel braided, PEX lined hose assemblies incorporating M10 spigot end connections.

Model: 22.021.892 supplied without pullout rod and pop-up drain 22.302.892, 22.512.892, 22.513.892 & 22.815.892 supplied with pullout rod and pop-up drain

Marking: 'Dornbracht' on body

Installation Requirements : R001 R006 R009 R010     

Note:  

Proviso:  

Manufacturer:  

Factor: Aloys F Dornbracht GmbH & Co KG

WRAS Approval Number  1301028

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) with non-rising spindle headwork controlling the flow and thermostatic cartridge controlling the temperature with dome type operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with pop-up waste. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut.

Model: 801350

Marking: BS5412 XZ on headworks

Installation Requirements : R001 R006         

Note: No testing performed on pop-up waste

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1301014

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge type headwork with lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size: Stainless steel, EPDM lined hose assembly with ½” BSP captive nut end connection.

Model: Caizhou 3305-D73

Marking: CAIZHOU on operating member

Installation Requirements : R001 R006 R009 R010     

Note:  

Proviso:  

Manufacturer: Kaiping Pasgo Plumbing Products Co. Ltd.

Factor: Caizhou Sanitary Ware Co Ltd

WRAS Approval Number  1201016

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel braided EPDM lined hose assemblies incorporating ½” BSP captive nut end connections.

Model: DTY306 – D Type.

Marking: UF on cartridge retaining nut.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Ultra Finishing Ltd

Factor:  

WRAS Approval Number  1107096

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener and stainless steel filter. Both inlets are supplied with a single check valve cartridge assembly (suitable for backflow prevention against fluid category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.

Model: PM SNK C.

Marking: Bristan on operating member. H & manufacturing date (MM/YY) on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

WRAS Approval Number  1304306

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headworks, and single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a waste fitting. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel EPDM lined hose assembly with 15mm compression connections

Model: Lundskar 20240023

Marking: Ikea & Lundskar on body

Installation Requirements : R001 R006 R009 R010     

Note:  

Proviso:  

Manufacturer:  

Factor: IKEA of Sweden AB.

WRAS Approval Number  1301331

Print this entry

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever top operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 70?C.

Size: 15 mm copper tails

Model: TSA1 & TSA4

Marking: San Marco 2010 on headwork

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1209021

Print this entry

Range of single hole, single outlet swivel combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork`s with single lever operating member. The spout outlets incorporate plastic aerator. Maximum working pressure 8 bar. Maximum working temperature 80°C.

Size: Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connectors.

Model: 907016 & 901407

Marking: BS5412 CD XZ 20 on headwork

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1203026

Print this entry

‘GOABO’ range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic discs or non-rising spindle headworks and single lever, dome or cross top operating members. Spout outlets incorporate plastic or stainless steel aerators. Maximum Working Pressure 10.0 bar. Maximum Operating Temperature 85°C size: ¼ turn ceramic disc headwork 71219015500 & 71256016400 (EPDM lined hose assemblies with ½” BSP captive nut end connections). 71219016300, 71258015900 & 71258115600 (15mm copper tails).

Size:  

Model: ¼ turn ceramic disc headwork71219015500 & 71256016400 (EPDM lined hose assemblies with ½” BSP captive nut end connections). 71219016300, 71258015900 & 71258115600 (15mm copper tails).Non-rising spindle headwork71258015700 (15mm copper tails).

Marking: Gaobo on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Zhejiang Gaobo Sanitary Wares Co Ltd

Factor:  

WRAS Approval Number  1207029

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator and the product is also supplied with a plastic flow straightener. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size: Stainless steel braided, PEX lined hose assembly incorporating ½” BSP female end connections.

Model: E0083AA Silver.

Marking: Ideal Standard on headwork.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Ideal Standard

Factor:  

WRAS Approval Number  1207040

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel braided PEX lined hose assembly with ½” BSP captive nut end connection.

Model: FGUK01900.

Marking: Guglielmi on operating member. Manufacturer's logo on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso: Inlet connection hoses must be installed where light is excluded.

Manufacturer: Gulf Eternit Industries

Factor:  

WRAS Approval Number  1105361

Print this entry

Single hole, metal single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter ceramic disc headwork`s and cross type operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a `click` type pop-up waste. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.

Model: ET 142

Marking: 'essential' on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Bathrooms

WRAS Approval Number  1106353

Print this entry

Single hole, metal single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks, and single lever operating members. The spout outlet incorporates a flow straightener and the product is supplied with a `click` type pop-up waste. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.

Model: ET 130

Marking: 'essential' on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Bathrooms

WRAS Approval Number  1205313

Print this entry

Single hole, single outlet (swivel) combination tap assembly (brushed steel finish) incorporating ceramic cartridge headwork and single lever cross top operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided PEX lined hose assembly incorporating 15mm compression end connections.

Model: IKEA ALSVIK KIT MX TP SING GB 100-850-32

Marking: IKEA ALSVIK on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso: Inlet hoses must be installed where light is excluded.

Manufacturer: Ikea of Sweden AB

Factor:  

WRAS Approval Number  1301330

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headwork with single lever top operating members. The spout outlet incorporates a flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 70?C.

Size: 15 mm copper tails

Model: ZT1010

Marking: San Marco 2010 on headwork

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1209303

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headwork, and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel, EPDM lined hose assembly with ½” captive nut

Model: Budskar 102-226-18

Marking: Ikea and model on body

Installation Requirements : R001 R006 R010       

Note: Inlet hose to be installed where light is excluded

Proviso:  

Manufacturer:  

Factor: Ikea of Sweden AB

WRAS Approval Number  1301332

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 70?C.

Size: 15 mm copper tails

Model: AT2003

Marking: San Marco 2010 on headwork

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1209080

Print this entry

Range of single hole, single outlet swivel combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic cartridges with single lever operating members. The spout outlets incorporate plastic flow straighteners. Maximum working pressure of model 907002 is 10.0 bar. Maximum working pressures of models M9604A, 107005,110710 & 907020 is 8 bar. Maximum operating temperature 80°C.

Size: Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connectors.

Model: 907002, M9604A B, 107005, 110710 & 907020

Marking: XZ on tap body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1212320

Print this entry

Three hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc type headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Size: ½” BSP (M)

Model: ML135DPC

Marking: ML135 on spout.

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop up waste

Proviso:  

Manufacturer:  

Factor: Crosswater Holdings Ltd

WRAS Approval Number  1106354

Print this entry

Range of single hole, single outlet (swivel) combination tap assemblies (brushed steel or chromium plated brass) with ceramic disc headworks and single lever operating members (brushed steel or chromium plated brass). Supplied with an open vented instant hot water dispenser (vented via the spout outlet) with 2.5 litre capacity. Maximum working pressure 8.6 bar and maximum operating temperature 98°C.

Size: 8mm Tubing

Model: Hot water dispensers: HWTF-1, HWTF-2, HWTF-3, HWTF-7 & HWTank-7. Tap assemblies: F-HC3300C, F-HC3300BR, F-H3300C & F-H3300BR

Marking: In-Sink-Erator on dispenser body. Model and technical information on adhesive label.

Installation Requirements : R001 R006 R150       

Note:  

Proviso:  

Manufacturer: Xiamen Runner Industrial Corp

Factor: Insinkerator

WRAS Approval Number  1106355

Print this entry

Range of single hole, single outlet (swivel) combination tap assemblies (brushed steel or chromium plated brass) with self closing headworks and single lever operating members (brushed steel or chromium plated brass). Supplied with an open vented instant hot water dispenser (vented via the spout outlet) with 2.5 litre capacity. Maximum working pressure 8.6 bar and maximum operating temperature 98ºC.

Size: 8mm Tubing

Model: Hot water dispensers: HWTF-1, HWTF-2, HWTF-3, HWTF-7 & HWTank-7. Tap assemblies: F-GN1100C, F-GN1100BR, F-HC1100C & F-HC1100BR.

Marking: In-Sink-Erator on dispenser body. Model and technical information on adhesive label.

Installation Requirements : R001 R006 R150       

Note:  

Proviso:  

Manufacturer: Xiamen Runner Industrial Corp

Factor: Insinkerator

WRAS Approval Number  1303317

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 55°C.

Size: 15 mm copper tails

Model: Blanco Cubic Mono BM/1350

Marking: Blanco on operating member

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Blanco Limited

WRAS Approval Number  1303011

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic disc headwork and lever type operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Size: Stainless steel braided, EPDM lined flexible hoses with ½” captive nut.

Model: 100308

Marking: BS5412 CD XZ 20 on headwork

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1212073

Print this entry

Single hole, single outlet, (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

Size: Stainless Steel braided, PEX lined hose assembly incorporating 3/8” BSP female end connections.

Model: FM Mattson S/L Kitchen mixer 9630-0010

Marking: 'FM Mattson' on operating member

Installation Requirements : R001 R006 R009 R010     

Note:  

Proviso:  

Manufacturer: Ostnor AB

Factor:  

WRAS Approval Number  1205021

Print this entry

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headwork`s and single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Size: 15mm copper tail inlets.

Model: Blanco Swift BM1426, Blanco Prinz BT1000, Blanco Swift BM1417 & Blanco Swift BM1420. Models Added April 2013 Blanco Solo BM1300, Blanco Solo BM1306 & Blanco Solo BM1317.

Marking: `Blanco` on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Blanco Limited

WRAS Approval Number  1205314

Print this entry

Range of single hole, single outlet (swivel) combination tap assemblies (brushed steel, white, chrome plated brass or black finishes available) incorporating ceramic cartridge headwork and single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided PVC lined hose assembly incorporating 15mm compression end connections.

Model: IKEA RINGSKAR KIT MX TP SING GB 101-296-82.IKEA RINGSKAR KIT MX TP SING GB 401-315-51.IKEA RINGSKAR KIT MX TP SING GB 601-405-78.IKEA RINGSKAR KIT MX TP SING GB 901-848-82.

Marking: IKEA RINGSKAR on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso: Inlet hoses must be installed where light is excluded.

Manufacturer: Ikea of Sweden AB

Factor:  

WRAS Approval Number  1205321

Print this entry

Single hole, single outlet (swivel) combination tap assembly (brushed steel finish) incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a pull out spray and a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Size: Stainless steel braided PEX lined hose assembly incorporating 15mm compression connections.

Model: IKEA ELVERDAM KIT MX TP SING SSTC GB 102 – 115 - 73

Marking: IKEA and Elverdam on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso: Inlet hoses must be installed where light is excluded.

Manufacturer: Ikea of Sweden AB

Factor:  

WRAS Approval Number  1205322

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass or brushed stainless steel plated brass) incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70?C.

Size: Stainless steel braided PEX lined hose assembly incorporating 15mm compression connections.

Model: Ikea Grundtal Wash Basin MX TP Sing GB 101-441-78. Ikea Lundskar Wash Basin MX TP/S Stainless Steel GB 202-400-23. Ikea Lundskar Wash basin MX TP/S Chrome GB 602-400-21.

Marking: IKEA and Grundtal on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso: Inlet hoses must be installed where light is excluded.

Manufacturer: Ikea of Sweden AB

Factor:  

WRAS Approval Number  1205374

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85OC.

Size: ¾” BSP (M)

Model: BR22141-000

Marking: Borer on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Taizhou Borer Clean Tool Co Ltd

Factor:  

WRAS Approval Number  1205013

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85 °C.

Size: 15mm Copper tail with 15mm compression adaptors.

Model: `Bristan` ALTVTSNK.

Marking: ‘WQ’ and month and year of manufacturer on body.

Installation Requirements : R001 R006 R010 .     

Note:  

Proviso:  

Manufacturer: Kaiping Weixiang Metal Products Industrial Co Ltd

Factor: Bristan Group Limited

WRAS Approval Number  1209081

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating non rising spindle headwork and cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10bar, Maximum operating temperature 80°C

Size: Stainless steel braided EPDM lined hose assembly incorporating ½” female captive nut.

Model: 100208.

Marking: BS5412 XZ 20 on headwork.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1205020

Print this entry

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork`s and single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Size: 15mm copper tail inlets.

Model: Blanco Regent BM8056, Blanco Regent BM8051 & Blanco Regent BM8517.

Marking: `Blanco` on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Vicario Armando & C Srl

Factor: Blanco Limited

WRAS Approval Number  0903331

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with quarter turn ceramic disc headworks and single lever operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails.

Model: Atlas.

Marking: Abode on single lever operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Abode Home Products Ltd

Factor:  

WRAS Approval Number  1205026

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating non rising spindle headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener and stainless steel filter & the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 15mm copper tail inlets.

Model: 60089 – 7001.

Marking: Lota on body.

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop up waste.

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1205061

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Size: 15mm copper tail inlets.

Model: Blanco Solo Tap (BM/1300).

Marking: Blanco on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Vicario Armando & C. Srl.

WRAS Approval Number  1103347

Print this entry

Single hole, metal single outlet (swivel) combination tap assembly (chromium plated) incorporating ceramic cartridge headwork, and single lever operating member. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: 15 mm copper tails

Model: MBOC110N & MBOC110P

Marking: Adora on body

Installation Requirements : R001 R006 R010       

Note: Model MBOC110P is supplied with a pop up waste that has not been tested.

Proviso:  

Manufacturer:  

Factor: Crosswater Holdings Ltd

WRAS Approval Number  1105359

Print this entry

Range of single hole, metal single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter ceramic disc headwork`s and a range of operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste (model MBPL110N not supplied with pop up waste). Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: 15 mm copper tails

Model: MBPL110N & MBPL110P

Marking: Adora on body

Installation Requirements : R001 R006 R010       

Note: Model MBPL110P is supplied with a pop up waste that has not been tested.

Proviso:  

Manufacturer:  

Factor: Crosswater Holdings Ltd

WRAS Approval Number  1109306

Print this entry

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop - up waste. Maximum operating pressure 10.0 bar & maximum operating temperature 70°C.

Size: Stainless steel, PEX Lined hose assembly with 3/8” BSP captive nut

Model: Focus 31 519 xxx - supplied with pop - up waste. Focus 31 609 xxx.

Marking: Hansgrohe etched onto body

Installation Requirements : R001 R006 R010       

Note: No testing carried out on pop - up waste

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1205066

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided PEX –lined hose assemblies incorporating 3/8”B.S.P. Captive end-nut connections.

Model: “Eurostyle Cosmopolitan” - 23.043.002.

Marking: Grohe, date of manufacture (YY/MM) and Grohe code 17 on body.

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop up waste.

Proviso: Inlet connection hoses must be installed where light is excluded.

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1205084

Print this entry

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) Incorporating quarter turn ceramic disc headworks with a range of single lever, dome and cross top operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum working temperature 80°C.

Size: Stainless steel braided EPDM lined hose assemblies with ½” captive nut end connectors.

Model: 111608

Marking: BS5412 CD XZ 24 on headworks.

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop up waste

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1207321

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc type headworks and dome operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Size: 15 mm copper tails

Model: CDG10T0002

Marking: Avonflow on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1207323

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Size: 15 mm copper tailsMoel:CDG10T0003

Model:  

Marking: Avonflow on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1205019

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork’s and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Size: 15mm copper tail inlets.

Model: Blanco Access BM5906, Blanco Access BM5917 & Blanco Access BM5900.

Marking: `Blanco` on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Vicario Armando & C Srl

Factor: Blanco Limited

WRAS Approval Number  0910331

Print this entry

Single hole, single outlet (swivel spout) combination tap assembly (chromium plated brass) with ceramic cartridge type headwork and lever operating member (chromium plated brass). The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar.

Size: 15 mm compression flexible tails.

Model: Hydrus & Modena

Marking: Modena: SMR on headwork stem. Hydrus: SMR on headwork stem and Abode on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Abode Home Products Ltd

WRAS Approval Number  1102020

Print this entry

Single hole, metal, single outlet swivel combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator or plastic flow straightener. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: 12mm chromium plated copper tail inlets.

Model: B4449AA – Sandringham.

Marking: Armitage Shanks on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Vidima AD

Factor: Armitage Shanks

WRAS Approval Number  1102018

Print this entry

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork’s and single lever operating members. The spout outlet incorporates a plastic aerator. E0067AA model is supplied with a pop-up waste. Maximum operating pressure 10.0 bar & maximum operating temperature 85°C.

Size: Stainless steel braided EPDM lined hose assemblies with 15mm compression end connections.

Model: E0067AA & E0069AA.

Marking: Ideal Standard on ceramic cartridge.

Installation Requirements : R001 R006 R010       

Note: No testing performed on pop-up waste.

Proviso:  

Manufacturer: Ideal Standard International

Factor: Armitage Shanks

WRAS Approval Number  1109357

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: Stainless steel braided EPDM lined hose assembly incorporating compression ½” captive nut end connections

Model: CDG08T0002

Marking: Avonflow on Body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1109356

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: 15mm Copper Tails

Model: CDG08T0001

Marking: Avonflow on Body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1207322

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 85OC.

Size: 15mm copper tails

Model: CDG10T0010

Marking: Avonflow on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  0912012

Print this entry

Single hole single outlet (swivel) combination tap assembly (chromium plated brass) with non- rising spindle headworks and dome operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tail inlets.

Model: VAC SFSNK C MT.

Marking: BS 5412 XZ 20 stamped into headworks.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Xiamen Zhongyu Hardware Industry Co Ltd

Factor: Bristan Group Limited

WRAS Approval Number  1102002

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork`s and cross top operating members. The spout outlet incorporates a plastic flow straightener, supplied with a pop up waste. Maximum working pressure 10.0 bar & maximum operating temperature 60°C.

Size: 15mm copper tail inlets.

Model: Tapmate Galaxy TM GAL BAS C.

Marking: Bristan & ST MM/YY (month and year of manufacture) on body.

Installation Requirements : R001 R006 R010 .     

Note: No testing performed on pop up waste.

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

WRAS Approval Number  1102016

Print this entry

Single hole, metal single outlet, swivel combination tap assembly (chrome plated, gold plated brushed nickel plated or antique bronze plated brass) incorporating non rising spindle headwork’s, cross top operating members and a plastic flow straightener at the spout outlet. Maximum working pressure 8.0 bar & maximum operating temperature 65°C.

Size: 15mm copper tail inlets

Model: K SNK C (chrome plated)K SNK G (gold plated)K SNK BN (brushed nickel plated)K SNK ABRZ (antique bronze plated).

Marking: U and month and year of manufacture on body.Bristan Colonial on indice.

Installation Requirements : R001 R006 R010