Section 0490

Print Entire Section

Combination Tap Assemblies

Single hole, metal, double outlet, swivel

WRAS Approval Number  1204023

Print this entry

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporates a plastic flow straightener Maximum working pressure 5.0 bar. Maximum operating temperature 75°C.

Size: 15mm copper tails

Model:  7095 Quartel & 795GENCP.

Marking: 7095 Quartel – ‘APC – MAM’ on headwork795GENCP – ‘NEW FAC 7095’ on headwork

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: FAC Rubinetteria Sas

Factor: APC Distributor Ltd

WRAS Approval Number  1212084

Print this entry

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) incorporating non -rising spindle headwork and either cross top or dome operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 15mm copper tail inlets

Model: K-499M-H1/Hanover & K-499M-H2/Hanover

Marking: 'C.K' on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Tsangkuo Industrial Co Ltd

Factor:  

WRAS Approval Number  1203088

Print this entry

`SP Yorke` single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating non rising spindle headwork`s and cross top operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 15mm copper tail inlets.

Model: SPT25

Marking: 'Gaobo' on body

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Stax Trade Centres plc

WRAS Approval Number  1107355

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ¼ turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum operating temperature 70ºC.

Size: 15mm Copper tails.

Model: TAC2.

Marking: ABAC20411 on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: AGA Rangemaster Leisure

WRAS Approval Number  1301031

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork and dome type operating members. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size: Stainless steel braided, EPDM lined hose assembly incorporating ½” captive nuts.

Model: DANUM DCD 5526.

Marking: Pegler on headwork.

Installation Requirements : R001 R006 R009       

Note:  

Proviso:  

Manufacturer: Pegler (Jiangmen) Plumbing and Heating Equipment Co. Ltd.

Factor: Pegler Yorkshire Group Ltd

WRAS Approval Number  1203021

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork’s and single lever operating members. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel braided PEX lined hose assemblies incorporating ½” BSP captive nut end connectors.

Model: L525 Leger.

Marking: P on indice and Pegler`on headworks.

Installation Requirements : R001 R006         

Note:  

Proviso: Inlet connection hoses must be installed where light is excluded.

Manufacturer: Pegler Yorkshire Group Ltd

Factor:  

WRAS Approval Number  1203027

Print this entry

‘Gaobo’ single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating non rising spindle headwork’s and cross top operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 15mm copper tail inlets.

Model: 71258016100

Marking: Gaobo on body

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Zhejiang Gaobo Sanitary Wares Co Ltd

Factor:  

WRAS Approval Number  1204002

Print this entry

`L526 Leger` single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork’s and single lever operating members. Maximum working pressure 6.0 Bar. Maximum operating temperature 85°C

Size: Stainless steel braided EPDM lined hose assemblies incorporating ½” BSP captive nut end connections.

Model: L526 Leger

Marking: Pegler logo on indice.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Pegler (Jiangmen) Plumbing & Heating

Factor: Pegler Yorkshire Group Ltd

WRAS Approval Number  1205087

Print this entry

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass or white coated brass), incorporating rising spindle or quarter turn ceramic disc headwork’s and single lever or dome operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 15mm Copper Tails.

Model: CAS TX SNK C- Quarter Turn Ceramic Disc lever operating member.CM SNK C MT- Non-Rising Spindle and dome operating member.CM SNK C WHT- Non-Rising Spindle and dome operating member.TSMSMC- Non-Rising Spindle and dome operating member.

Marking: CAS TX SNK C – WQ and date of manufacture (MM/YY) on body.CM SNK C MT – Bristan, WQ and date of manufacture (MM/YY) on body.CM SNK C WHT – Bristan, WQ and date of manufacture (MM/YY) on body.TSMSMC – Bristan, WQ and date of manufacture (MM/YY) on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Kaiping Weixiang Metals Products Industrial Co Ltd

Factor: Bristan Group Limited

WRAS Approval Number  0812108

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks and dome single lever operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails.

Model: TP1073.

Marking: DTC34 CH20 on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Pland Stainless Ltd.

WRAS Approval Number  1209300

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar and maximum operating temperature 70ºC.

Size: 15mm Copper tails.

Model: FD2

Marking: San Marco on headwork

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1209100

Print this entry

Range of single hole, double outlet (swivel) combination tap assemblies (available in chromium plated brass, nickel plated brass or pewter finishes) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate plastic aerators for the mixed hot/cold water and a metal flow straightener for filtered cold water. The products have a filtered cold water supply which is operated independently via a quarter turn ceramic disc headwork and are supplied with a carbon block filter cartridge. Products are supplied with a check valve assembly (suitable for backflow protection against fluid category 2) and a spherical valve. Maximum working pressure 6.9 Bar. Maximum operating temperature 52°C.

Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP Inlets (hot & cold). 3/8” BSP (filter).

Model: TF-KT32C-** OBERON C spout & TF-KT32U-** OBERON U spout , TF-KT33C-** ORBIQ C spout & TF-KT33U-** ORBIQ U spout, TF-KT34C-** RUBIQ C spout & TF-KT34U-** RUBIQ U spout --- ** donates finish - CP = Chrome, NI = Nickel, PF = Pewter.

Marking: Triflow & logo on body. Triflow, serial number and product info on filter housing.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Triflow Concepts Limited

Factor:  

WRAS Approval Number  1209101

Print this entry

Range of single hole, double outlet (swivel) combination tap assemblies (available in chromium plated brass, nickel plated brass or pewter finishes) incorporating quarter turn ceramic disc headworks, single lever operating members and rinse handset with self-closing trigger mechanism. The spout outlets incorporate plastic aerators for the mixed hot/cold water and a metal flow straightener for filtered cold water. The products have a filtered cold water supply which is operated independently via a quarter turn ceramic disc headwork and are supplied with a carbon block filter cartridge. Products are supplied with a check valve assembly (suitable for backflow protection against fluid category 2) and a spherical valve. Maximum working pressure - 6.9 Bar. Maximum operating temperature - 52°C.

Size: Stainless steel braided EPDM lined flexible hoses - ½” BSP Inlets (Hot & Cold) - 3/8” BSP (filter)

Model: TF-KT32CR-** C spout & TF-KT32UR-** U spout (Oberon), TF-KT33CR-** C spout & TF-KT33UR-** U spout (Orbiq), TF-KT34CR-** C spout & TF-KT34UR-** U spout (Rubiq) --- ** donates finish - CP = Chrome, NI = Nickel, PF = Pewter

Marking: Triflow & logo on body. Triflow, serial number and product info on filter housing.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Triflow Concepts Limited

Factor:  

WRAS Approval Number  1107356

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum operating temperature 70ºC.

Size: 15mm Copper tails.

Model: TFL1.

Marking: ABFL10711 on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: AGA Rangemaster Leisure

WRAS Approval Number  0806007

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with a ceramic cartridge headwork and single lever operating member (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails, stainless steel braided EPDM lined hose assembly with ½" BSP captive nut end connections.

Model: 793BOLDF dual flow sink mixer.

Marking: `Tecnik` etched into operating member.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: APC Distributor Ltd

Factor:  

WRAS Approval Number  1107044

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener. The assembly also has a filtered water supply which is operated independent of the headworks & the product is supplied with a filter cartridge. Maximum working pressure 7.0 bar, Maximum operating temperature 80°C

Size: 15mm copper tails.

Model: 4600

Marking: `Tecnik` on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: FAC Rubinetteria SAS

Factor: APC Distributor Ltd

WRAS Approval Number  0910009

Print this entry

Single hole double outlet (swivel) combination tap assemblies (chromium plated brass or matt white finish) with non-rising spindle headworks and dome operating members (chromium plated brass).

Size: 15mm copper tail inlets.

Model: VAC BSNK C MT chromium plated. VAC BSNK WHT matt white finish.

Marking: BS 5412 XZ 24 stamped into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Xiamen Zhongyu Hardware Industry Co Ltd

Factor: Bristan Group Limited

WRAS Approval Number  0909071

Print this entry

Single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) with ¼ turn ceramic disc headworks and a single lever operating member (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails

Model: VAL SNK C CD

Marking: H, month and year of manufacture on back of tap

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

WRAS Approval Number  0907105

Print this entry

Range of single hole double outlet (swivel) combination tap assemblies (chromium plated brass) with non rising spindle headworks and cross top or dome type operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails.

Model: VAC SNK C MT, 842/4729, ALTCNSNK (all dome members) & VAX SNK C (cross top member) & VAC SNK C NH (no operating member supplied)

Marking: VAC SNK C MT - Bristan on indice. 842/4729 - Bristan on operating member. ALTCNSNK - H on back of tap. VAX SNK C - Bristan on operating member. VAC SNK C NH - H on back of tap.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

WRAS Approval Number  0910080

Print this entry

Single hole double outlet (swivel) combination tap assemblies (chromium plateded brass) with non-rising spindle headworks and dome operating members.

Size: 15mm copper tail inlets.

Model: RG SNK C.

Marking: H and month and year of manufacture (HXXXX) on back of tap.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

WRAS Approval Number  1107534

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ¼ turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum operating temperature 70ºC.

Size: 15mm Copper tails.

Model: TT40.

Marking: CDA on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: CDA Group (The)

WRAS Approval Number  1107351

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ¼ turn ceramic disc headworks and cross-top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum operating temperature 70ºC.

Size: 15mm Copper tails.

Model: TT25

Marking: CDA on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: CDA Group (The)

WRAS Approval Number  1107352

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks and dome operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum operating temperature 70ºC.

Size: 15mm Copper tails.

Model: TC25.

Marking: CDA on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: CDA Group (The)

WRAS Approval Number  1107353

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum working temperature 70ºC.

Size: 15 mm copper tails

Model: TC41.

Marking: CDA on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: CDA Group (The)

WRAS Approval Number  1006305

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with a quarter turn ceramic disc headwork and lever style operating members (chromium plated brass). Maximum working pressure 10.0 bar.

Size: 15 mm copper tails.

Model: Westflow Lever Monobloc Sink Mixer.

Marking: Headwork stamped PEGLER.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Comap Westco Ltd

WRAS Approval Number  0907080

Print this entry

Single hole double outlet (swivel) combination tap assembly (chromium plated brass) with non-rising spindle headworks.

Size: 15mm copper tails.

Model: Avanti.

Marking: Pegler stamped into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Comap Westco Ltd

WRAS Approval Number  0812016

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with non-rising spindle headworks and dome operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails.

Model: DCM104 - 410156, Iris104, Milan104, Sole104, DAC104, DCP124.

Marking: DTC BS 5412 CH20 stamped into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Deva Tap Company (The)

WRAS Approval Number  0812018

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks and dome single lever operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails.

Model: DLT104

Marking: DTC CH20 etched into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Deva Tap Company (The)

WRAS Approval Number  1006002

Print this entry

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass). Flow is controlled via a ¼ turn ceramic disk headwork with either single lever or dome operating members (chromium plated brass) and temperature is controlled via a thermostatic cartridge with either single lever or dome operating members (chromium plated brass). Both hot and cold inlets incorporate plastics filters and Neoperl single check valve cartridges (suitable for backflow protection against fluid category 2). Maximum working pressure 5.0 bar.

Size: Stainless steel braided EPDM lined hose assemblies with 3/8" captive nut end connectors

Model: Securitherm wash basin H9726 & H9727. Securitherm sink H9716 & H9717.

Marking: Chavonnet etched into body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Delabie

Factor: Douglas Delabie

WRAS Approval Number  1004320

Print this entry

`Oxford’ single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with non rising spindle headworks and club type operating members (chromium plated brass). Flow straightener fitted at spout outlet. Maximum working pressure 5.0 bar.

Size: 15 mm copper tails.

Model: `Oxford’ Sink Mixer.

Marking: FN 91 Stamped into headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: FLLI Nolli Srl

Factor:  

WRAS Approval Number  1109018

Print this entry

A single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: 15mm copper tail inlets.

Model: 4008449.

Marking: Carron Phoenix on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Joden Plumbing Products (Jiang Men) Co Ltd

Factor: Franke (China) Kitchen Systems Co Ltd

WRAS Approval Number  0807054

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with non-rising spindle headworks and dome operating members (chromium plated plastic). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails.

Model: FS2K0000.

Marking: `GU` etched into body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Globe Union Industrial Corp

Factor:  

WRAS Approval Number  1106003

Print this entry

Single hole, metal double outlet (swivel) combination tap assemblies. The hot and cold supplies are controlled by a ceramic cartridge headwork via a single lever operating member. The high temperature hot water supply is controlled by a quarter turn ceramic disc headwork via a sliding trigger controlled operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar & maximum operating temperature 99°C.

Size: Stainless steel braided PEX lined hose assemblies incorporating 3/8” BSP captive nut end connections.

Model: Grohe RED Duo 30.033.00 Chrome & Grohe RED Duo 30.033 DCO Supersteel.

Marking: Grohe and date of manufacture on body.

Installation Requirements : R001 R006 R010       

Note: Inlet connection hoses must be installed where light is excluded.

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1011003

Print this entry

`Grohe Blue` single hole, metal double outlet (swivel) combination tap assembly (chromium plated brass). The hot and cold supply is controlled by a ceramic cartridge headwork via a single lever-operating member. The filtered water supply is controlled by a quarter turn ceramic disc headwork via a dome operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.6 bar & maximum operating temperature 70°C.

Size: Stainless steel braided polyethylene lined hose assemblies with 3/8” BSP captive nut end connections.

Model: `Grohe Blue` 31.087.000- Chrome 31.087.DC0- Supersteel

Marking: `Grohe` and date of manufacturer on tap body and `Grohe Blue` on operating member.

Installation Requirements : R001 R006 R010 R150     

Note: Inlet connection hoses must be installed where light is excluded

Proviso: The discharge to drain from the water filter must discharge via a type AA, AB or AD air gap or in accordance with EN1717.

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  0904009

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks and crosstop operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener. Maximum working pressure 8.6 bar.

Size: Stainless steel braided EPDM lined hose assemblies with ½" compression end connections.

Model: 9L2017CP chrome monobler tap Viking hd1.

Marking: SG, WRAS etched into body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Guangzhou Seagull Kitchen & Bath Products Co Ltd

Factor:  

WRAS Approval Number  1007701

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks and single lever operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tail inlets.

Model: 930018CP.

Marking: Carron, Phoenix etched into body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Guangzhou Seagull Kitchen & Bath Products Co Ltd

Factor:  

WRAS Approval Number  0907037

Print this entry

Single hole double outlet (swivel) combination tap assemblies (chromium plated brass) with non-rising spindle headworks and a range dome operating members (chromium plated brass).

Size: Polo, Mercia Modern (4M3917) & Mercia Modern Mono Kitchen Mixer (4M3918).

Model: 15mm copper tails or stainless steel braided EPDM lined hose assembly with ½” captive nut end connection.

Marking: Pegler stamped into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

Factor:  

WRAS Approval Number  1003085

Print this entry

Range of single hole double outlet (swivel) combination tap assemblies (chromium plated brass or white finish) with non-rising spindle or ¼ turn ceramic disc headworks supplied with dome, crosstop or single lever operating members (chromium plated brass). Some models incorporate a plastic flow straightener at the outlet.

Size: 15mm copper tail inlets.

Model: M52172A - Non rising spindle and crosstop operating members. 907011- ¼ turn ceramic disc and single lever operating members. 907011A -¼ turn ceramic disc and single lever operating members. 907012 -Non rising spindle and crosstop operating members, incorporates a flow straightener at the outlet.

Marking: M52172A - BS 5412 XZ 20 stamped into headworks. 907011 - BS 5412 CD XZ 20 stamped into headworks. 907011A - BS 5412 CD XZ 20 stamped into headworks. 907012 - DTC BS5412 X20 stamped into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1003036

Print this entry

Range of single hole double outlet (swivel) combination tap assemblies (chromium plated brass or white finish) with non-rising spindle or ¼ turn ceramic disc headworks supplied with dome, crosstop or single lever operating members (chromium plated brass). Some models incorporate a plastic flow straightener at the outlet.

Size: 15mm copper tail inlets.

Model: Monobloc Sink Mixers M5107 -¼ turn ceramic disc and single lever operating members, incorporating a flow straightener at the outlet. M5207- Non rising spindle and dome operating members, incorporates a flow straightener at the outlet. M5207WH- Non rising spindle and dome operating members, white finished body, incorporates a flow straightener at the outlet.

Marking: M5107 - BS 5412 CD XZ 20 stamped into headworks. M5207 - BS 5412 XZ 20 stamped into headworks. M5207WH - BS 5412 XZ 20 stamped into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1107315

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ¼ turn ceramic disc headworks and cross-top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum operating temperature 70ºC.

Size: 15mm Copper tails.

Model: FR1

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107319

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum working temperature 70ºC.

Size: 15 mm copper tails

Model: BO2

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107318

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks and dome operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum operating temperature 70ºC.

Size: 15mm Copper tails.

Model: AD2

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107321

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and lever type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum operating temperature 70ºC.

Size: 15 mm copper tails

Model: FM2

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107322

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum working temperature 70ºC.

Size: 15 mm copper tails

Model: FP2

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107320

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ¼ turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum operating temperature 70ºC.

Size: 15mm Copper tails.

Model: DNP2

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107316

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ¼ turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar & maximum working temperature 70ºC.

Size: 15 mm copper tails

Model: Kitchen Mixer ML1

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107317

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar and maximum operating temperature 70?C.

Size: 15mm Copper tails.

Model: RF4

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107314

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ¼ turn ceramic disc headworks and dome operating members. The spout outlet incorporates a metal flow straightener. Maximum working pressure 5.0 bar and maximum operating temperature 70ºC.

Size: 15mm Copper tails.

Model: FM1

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107313

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ¼ turn ceramic disc headworks and dome operating members. The spout outlet incorporates a metal flow straightener. Maximum working pressure 5.0 bar & maximum operating temperature 70ºC.

Size: 15mm Copper tails.

Model: DN1

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107312

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar & maximum working temperature 70ºC.

Size: 15 mm copper tails

Model: Kitchen Mixer AM1

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107311

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ¼ turn ceramic disc headworks and cross-top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum operating temperature 70ºC.

Size: 15mm Copper tails.

Model: AC1

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107323

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and lever type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum working temperature 70ºC.

Size: 15 mm copper tails

Model: Kitchen Mixer GN2

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  1107324

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and lever type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar & maximum working temperature 70ºC.

Size: 15 mm copper tails

Model: OP2

Marking: San Marco & year of manufacture on headwork.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: San Marco Rubinetteria Srl

Factor:  

WRAS Approval Number  0902012

Print this entry

Two hole, double outlet (swivel) combination tap assemblies (chromium plated brass) with ¼ turn ceramic disc headworks and single lever operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener. Supplied with plastic backnuts.

Size: ½" BSP.

Model: DLT105 - 410715, DLV105.

Marking: DTC CH20 etched into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: The Deva Tap Company

WRAS Approval Number  0902011

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with non-rising spindle headworks and cross top operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails.

Model: 189X.

Marking: DTC BS5412 CH stamped into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: The Deva Tap Company

WRAS Approval Number  0807008

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks and single lever or dome operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: Stainless steel braided EPDM lined hose assemblies with ½" BSP captive nut end connections.

Model: Phoenician 4460**, Phoenician 4461**, Byzantian 4430**.** Indicates finish variant, BZ=Bronze, CP=Chrome, CPIG=Chrome & Gold, IG=Gold, NI=Nickel, NIIG=Nickel & Gold, PF=Pewter, PFIG=Pewter & Gold.

Marking: `Avilion` stamped into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Triflow Concepts Limited

Factor:  

WRAS Approval Number  1001304

Print this entry

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) with ceramic cartridge type headwork and single lever operating member (chromium plated brass). The spout outlet incorporates a plastic aerator.

Size: ½" BSP captive nut

Model: 224056 - Kitchen mixer high spout without shut off

Marking: Operating member etched Gustavsberg

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Villeroy and Boch Gustavsberg AB

Factor:  

WRAS Approval Number  0907110

Print this entry

Single hole double outlet (swivel) combination tap assembly (chromium plated brass) with non-rising spindle headworks and dome operating members (chromium plated brass).

Size: 15mm copper tails.

Model: Swan Standard DC Kitchen CP (C48107).

Marking: Swan on indice.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Wolseley UK

WRAS Approval Number  0903003

Print this entry

Single hole, double outlet (swivel) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks and single lever operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails.

Model: Mono block sink mixer M5010K.

Marking: XZ etched into body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Xiamen Zhongyu Hardware Industry Co Ltd

Factor:  

WRAS Approval Number  0907026

Print this entry

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) with non rising spindle headworks and cross top or dome type operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails.

Model: M0107 (Selling code: 11095-96). M0407 (Selling code: 11095-96). M0413 (Selling code: 11095-96). M04130 (Selling code: 604608). M0113 (Selling codes: 604571/5059799/78570-96). M0113 - white (Selling code: 5059782-41894-96). M0113 - cream (Selling code: 5059805). M0113 - mocca (Selling code: 5059812).

Marking: BS 5412 - XZ stamped into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Xiamen Zhongyu Hardware Industry Co Ltd

Factor:  

WRAS Approval Number  0909712

Print this entry

Single hole, double outlet (swivel), combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks and single lever operating members (chromium plated plastic). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails.

Model: M09130 (Selling code: 10724-96).

Marking: BS 5412 CD - XZ stamped into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Xiamen Zhongyu Hardware Industry Co Ltd

Factor:  

WRAS Approval Number  0909701

Print this entry

Single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) with ¼ turn ceramic disc headworks and a range of single lever operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener.

Size: 15mm copper tails.

Model: M0207, M0213, M0307 & M0313 (Selling code: 604578).

Marking: BS 5412 CD XZ stamped into headworks.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Xiamen Zhongyu Hardware Industry Co Ltd

Factor: