Section 0510

Print Entire Section

Combination Tap Assemblies

Two hole, metal, single outlet, fixed

WRAS Approval Number  1112016

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: 62315 - 5001.

Marking: Lota on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1203368

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a stainless steel aerator & the product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: Supaplumb SPT225.

Marking: SP on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Stax Trade Centres plc

WRAS Approval Number  1203014

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork’s and single lever operating member. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: B9682AA – Natos.

Marking: `Ideal Standard` on operating member.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: Ideal Standard

Factor:  

WRAS Approval Number  1203015

Print this entry

‘Vectis’ two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork’s and single lever operating member. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets

Model: Vectis bath filler - B9687AA

Marking: ‘Ideal Standard’ on operating member

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Ideal Standard

Factor:  

WRAS Approval Number  1112301

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc type headworks, and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar Maximum operating temperature 85°C.

Size: ¾” BSP (F)

Model: CDG22T0012

Marking: Avonflow on body

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1112307

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic disc headworks, and lever operating members. The spout outlet incorporates a plastic flow straigntener and the product is supplied with brass back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Size: ¾” BSP (M)

Model: F24A4611 Bath Mixer

Marking: Globe Union on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Shen Zhen Globe Union Industrial Corp

Factor: Globe Union Industrial Corp

WRAS Approval Number  1204020

Print this entry

Two hole, metal, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and a range of single lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: ¾” male BSP inlets.

Model: Quest QUE303 & QUE399.

Marking: UF on headworks.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: Ultra Finishing Ltd

Factor:  

WRAS Approval Number  1112011

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: 62335 – 5001.

Marking: Lota on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1301034

Print this entry

Two hole single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets

Model: B0293AA - Opus Dual control bath filler

Marking: IS logo on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Ideal Standard International (B&K)

Factor: Ideal Standard

WRAS Approval Number  1112031

Print this entry

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 55°C.

Size: ½” female BSP inlets.

Model: WG 6804.

Marking: American Standard on operating member.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: American Standard (Jiangmen) Fittings Co Ltd

Factor:  

WRAS Approval Number  1201036

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: 62326 – 5001.

Marking: `Lota` on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1201307

Print this entry

Two hole, single outlet (fixed) combination tap assembly with quarter turn ceramic disc type headworks and dome type operating members (chromium plated brass). Supplied with metal backnuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC

Size: ¾” BSP (M)

Model: CDG22T0002

Marking: Avonflow on body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1107300

Print this entry

Single hole, single outlet (fixed) combination tap assembly (brushed chrome) incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a plug and waste fitting. Maximum working pressure 10.0 bar and maximum operating temperature 85 ?C.

Size: Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut end connection.

Model: IKEA ANN 400-361-63

Marking: IKEA on body

Installation Requirements : R001 R010 R040       

Note: No testing carried out on waste.

Proviso:  

Manufacturer: Shen Zhen Globe Union Industrial Corp

Factor: Ikea of Sweden AB

WRAS Approval Number  1204026

Print this entry

`Sandringham` two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork’s and single lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Size: ¾” BSP male inlets.

Model: E5069AA Sandringham SL.

Marking: Armitage Shanks on operating member

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Armitage Shanks

WRAS Approval Number  1203050

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic headwork`s and single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Size: ¾” B.S.P. Male Inlets.

Model: CAP BF C & JU BF C.

Marking: KE1010 on body. Bristan on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Guangdong Huayi Plumbing Fittings Industry Co. Ltd.

Factor: Bristan Group Limited

WRAS Approval Number  1112325

Print this entry

Two hole, metal, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: 60110-5001

Marking: LOTA on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1203330

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a stainless steel aerator & the product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: CDG22T0014

Marking: Avonflow on body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor: Hangzhou Doz Import & Export Co Ltd

WRAS Approval Number  1107097

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straighteners & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlet.

Model: PS BF C.

Marking: Bristan on operating member. H & manufacturing date (MM/YY) on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

WRAS Approval Number  1107098

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks with a range of single lever operating members. The spout outlets incorporate a flow straightener & the product is supplied with metal backnuts. Model J BF C incorporates a single check valve cartridge on both inlets (suitable for backflow prevention against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlet.

Model: OR BF C & J BF C.

Marking: Bristan on operating member. H & manufacturing date (MM/YY) on rear of body.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

WRAS Approval Number  1009407

Print this entry

Two hole, metal, single outlet (fixed) combination tap assembly (chromium plated brass) with a ceramic cartridge headwork and lever type operating members (chromium plated zinc). The spout incorporates a flow straightener and is supplied with metal backnuts. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: ¾" BSP (M)

Model: 12-011-087

Marking: AKW on body

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: DLP Limited

WRAS Approval Number  1009408

Print this entry

Two hole, metal, single outlet (fixed) combination tap assembly (chromium plated brass) with a quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: ¾"BSP (M)

Model: 12-011-034

Marking: AKW on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: DLP Limited

WRAS Approval Number  1107360

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with metal back nuts. Maximum working pressure 10.0 bar & maximum operating temperature 85?C.

Size: ¾” BSP (M)

Model: 12-011-056

Marking: AKW on body.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: DLP Limited

WRAS Approval Number  1301345

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: 12-011-085

Marking: AKW on Operating member

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: DLP Limited

WRAS Approval Number  1212044

Print this entry

Range of two hole, single outlet (fixed), combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks and a variety of single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 16.0 Bar Maximum operating temperature 85°C

Size: ¾” BSP male inlet connections

Model: JY2001333, JY2000133, JY2002333, JY2001933 & JY01714.

Marking: 'Joyou' on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

WRAS Approval Number  1207030

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever, dome type or cross top operating members. The spout outlets incorporate a plastic flow straightener except for model 101306. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: 101306,110406 & M3206 (single lever operating members). M3106 (cross top operating member). M3606 (dome type operating member).

Marking: BS 5412 CD XZ 24 on headwork.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1203008

Print this entry

‘Piccolo’, two hole single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size:  ¾” BSP female inlets

Model: Piccolo 21 DC 2TH bath filler, B9140AA.

Marking: Armitage shanks on operating member

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Armitage Shanks

WRAS Approval Number  1203332

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: BR12141 – 000

Marking: Borer on operating member

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Taizhou Borer Clean Tool Co. Ltd.

Factor:  

WRAS Approval Number  1301326

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (m)

Model: 60106-5401

Marking: Lota on Operating member

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1201012

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork`s and single lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: ¾” male BSP inlets.

Model: LOG303 Logo.

Marking: HR on operating members and UF on headwork.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: Ultra Finishing Ltd

Factor:  

WRAS Approval Number  1301022

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: B9674AA - Alto

Marking: 'Ideal Standard' on operating member

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Ideal Standard International (B&K)

Factor: Ideal Standard

WRAS Approval Number  1301033

Print this entry

Two hole single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener and is supplied with an alternative plastic aerator. The product is supplied with a chromium plated brass back plate. Maximum working pressure 6.0 Bar. Maximum operating temperature 60°C

Size: ½” BSP female inlet

Model: Visio 4K4003

Marking: Francis Pegler on operating member. Pegler on inside of operating member.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Pegler (Jiangmen) Plumbing and Heating Equipment Co. Ltd.

Factor: Pegler Yorkshire Group Ltd

WRAS Approval Number  1207031

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork`s and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male end connections.

Model: 102306 & 100806.

Marking: BS 5412 CD XZ 24 on headwork.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1212029

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating either quarter turn ceramic disc or non-rising spindle headworks and cross -top, dome, or single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Size: ¾” B.S.P. Male Inlets.

Model: VEC-137-C/P - Cross-Top Operating Members. AST-137-C/P - Dome Operating Members. AST-237-C/P - Cross-Top Operating Members. AST-337-C/P - Single Lever Operating Members. VEC-137/CD-C/P - Cross-Top Operating Members. AST-137/CD-C/P - Dome Operating Members. AST-237/CD-C/P - Cross-Top Operating Members. AST-337/CD-C/P - Single Lever Operating Members. * CD models have ceramic disc headworks.

Marking: VADO on body. Eurobath England on headwork. BS 5412 on non-rising spindle headwork

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Vado

Factor:  

WRAS Approval Number  1209032

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and a supplied with either single lever or cross-top operating members. The spout outlets incorporate a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M).

Model: 2035 - CR (single lever operating members). 2036 - CR (cross top operating members).

Marking: 'Carlota' on underside of body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Zhejiang Carlota Sanitary Ware Manufactory Co Ltd

Factor:  

WRAS Approval Number  1207032

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. Maximum working pressure 10.0 Bar. Maximum operating temperature 85ºC.

Size: ¾” BSP male end connections

Model: 900406 & 901606.

Marking: BS 5412 CD XZ 24 on headwork

Installation Requirements : R001 R006 R010 R160     

Note:  

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1102035

Print this entry

Two hole single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 16 bar & maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: GAOBO - 71236015800.

Marking: `GAOBO` on body.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: Zhejiang Gaobo Sanitary Wares Co Ltd

Factor:  

WRAS Approval Number  1205412

Print this entry

Two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks and lever operating members. The spout outlets incorporate a plastic flow straightener & the products are supplied with brass backnuts. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: MBPL322D

Marking: 'Adora' on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Crosswater Holdings Ltd

WRAS Approval Number  1302336

Print this entry

Wall mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating members, and a waterfall effect outlet. Both ilets incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel, EPDM lined hose assemblies with ½” captive nut

Model: Libero LB121WNC (waterfall outlet)

Marking: LB121 on body

Installation Requirements : R001 R009 R040 R160     

Note:  

Proviso:  

Manufacturer:  

Factor: CP Hart,

WRAS Approval Number  1302335

Print this entry

Range of shower handsets with ABS bodies and face plate. Maximum operating temperature 85OC.

Size: ½” BSP (M)

Model: A110101, A108102, A173102, A173302, A184302, A184101

Marking: Goloy on body

Installation Requirements : R001 R040         

Note: Open outlet use only

Proviso:  

Manufacturer: Xiamen Oshince Sanitary Development Co., Ltd.

Factor:  

WRAS Approval Number  1302303

Print this entry

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel, EPDM lined hose assemblies with ½” captive nut incorporating a stainless steel strainer.

Model: ME120WNC

Marking: MO120 on spout

Installation Requirements : R001 R009 R010 R040     

Note:  

Proviso:  

Manufacturer:  

Factor: CP Hart,

WRAS Approval Number  1302309

Print this entry

Range of two hole, single outlet (fixed) wall mounted combination tap assemblies (chromium plated brass) incorporating ceramic cartridge type headwork and single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel braided EPDM lined hose assembly incorporating ½” BSP captive nut end connections.

Model: KL120WNC, KL121WNC (rectangular backplate) & CE121WNC (oval backplate).

Marking: Model code on body

Installation Requirements : R001 R009 R010 R040     

Note:  

Proviso:  

Manufacturer:  

Factor: Crosswater Holdings Ltd

WRAS Approval Number  1207026

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) with quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: B7891AA Ceraplan

Marking: ISI on body. Ideal Standard logo on operating members.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: Ideal Standard International (B&K)

Factor: Ideal Standard

WRAS Approval Number  1209301

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Size: 3/4” BSP (M)

Model: F24A4612

Marking: Globe Union on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Shen Zhen Globe Union Industrial Corp

Factor:  

WRAS Approval Number  1212045

Print this entry

Two hole, single outlet (fixed), combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlet connections

Model: JY01398

Marking: 'Joyou' on body.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

WRAS Approval Number  1212049

Print this entry

Two hole single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and dome operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 65°C.

Size: ¾” BSP Male inlet

Model: PG323 - Radius bath filler

Marking: UF on headworks. Twyford on operating member.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Twyford Bathrooms

WRAS Approval Number  1205408

Print this entry

Two hole, metal, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and cross type operating members. The spout outlet incorporates a plastic aerator & the products are supplied with brass backnuts. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: ET 143

Marking: 'essential' on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Bathrooms

WRAS Approval Number  1302308

Print this entry

Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel, EPDM lined hose assemblies with ½” captive nut

Model: MO112WNC

Marking: MO120 on body

Installation Requirements : R001 R009 R010 R040     

Note:  

Proviso:  

Manufacturer:  

Factor: CP Hart,

WRAS Approval Number  1302305

Print this entry

Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating members. The spout outlet incorporates a plastic low straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel, EPDM lined hose assemblies with ½” captive nut

Model: Celare CL121WNC.

Marking: CL121 on body

Installation Requirements : R001 R009 R010 R040     

Note:  

Proviso:  

Manufacturer:  

Factor: CP Hart,

WRAS Approval Number  1205411

Print this entry

Two hole, metal, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and lever operating members. The product is supplied with brass backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: MBOC322D

Marking: 'Adora' on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Crosswater Holdings Ltd

WRAS Approval Number  1209026

Print this entry

Range of two hole single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with brass backnuts. Maximum working pressure 10bar. Maximum operating temperature 85°C

Size: ¾” male BSP Inlet.

Model: B0172AA Senses Sphere & B5110AA Cone.

Marking: ISI on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Ideal Standard International (B&K)

Factor: Ideal Standard

WRAS Approval Number  1206002

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member (chromium plated brass). The spout outlet incorporates a plastic aerator. Maximum working pressure 7.5 bar. Maximum operating temperature 55°C.

Size: Stainless steel braided EPDM lined hose assemblies incorporating ½” BSP captive nut end connections.

Model: WF-2861.I.HI.50.

Marking: American Standard on operating member face plate.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: American Standard (Jiangmen) Fittings Co Ltd

Factor:  

WRAS Approval Number  1107329

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a flow straightener and stainless steel strainer, the product is supplied with metal back nuts. Maximum working pressure 10.0 bar & maximum operating temperature 85?C.

Size: ¾” BSP (M)

Model: 60204-5201

Marking: KV01315 on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1205305

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and dome operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: CDG22T0009

Marking: Avonflow on body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1205309

Print this entry

Two hole, metal, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and lever operating members. The product is supplied with brass backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: 60628-5101

Marking: LOTA on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1205310

Print this entry

Two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks and lever or cross type operating members. The spout outlets incorporate a plastic flow straightener or plastic aerator (model 60094-5601 model only) & the products are supplied with brass backnuts. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: 60094-5001, 60094-5101 & 60094-5201(lever operating members). Model Added November 2012 60094-5601 (cross head operating members).

Marking: LOTA on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1205025

Print this entry

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating non rising spindle headworks and dome or cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: 60104 – 5001 (Dome type)60104 – 5101 (Dome type)60104 – 5201 (Dome type)60104 – 5301 (Cross Top)

Marking: `Lota` on body.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1209017

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and a single lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP Male Inlet

Model: B0166AA

Marking: Ideal Standard & logo on operating members

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Standard

WRAS Approval Number  1205071

Print this entry

`Euroeco Spezial` wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a sequential ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a stainless steel aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Size: ¾” BSP female inlets.

Model: `Euroeco Spezial` - 33.371.

Marking: Grohe on operating member.Grohe, kiwa, date of manufacture (YY/MM) and Grohe code 02 on body.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1212042

Print this entry

Range of two hole, single outlet (fixed), combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever or cross top operating members. The spout outlets incorporate plastic flow straighteners & the products are supplied with metal backnuts. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C

Size: ¾” BSP male inlet connections

Model: JY04243, JY04214, JY04314, JY2000233 & JY2000333.

Marking: 'Joyou' on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

WRAS Approval Number  1206006

Print this entry

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 7.5 bar. Maximum operating temperature 55°C.

Size: ½” female BSP inlets.

Model: WF-1963, 1H1.50-IDS

Marking: American Standard operating member face plate.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: American Standard (Jiangmen) Fittings Co Ltd

Factor:  

WRAS Approval Number  1206022

Print this entry

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating rising spindle or quarter turn ceramic disc headwork`s. The spout outlet incorporates a plastic flow straightener & the products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: ON BF C (Rising spindle headwork) & ON BF C CD (Ceramic disc headwork)

Marking: `U` and date of manufacture (month/year) on body.

Installation Requirements : R001 R006 R010       

Note: No operating members supplied or covered in this approval.

Proviso:  

Manufacturer: Home Well Industrial (Hui Yang) Co. Ltd.

Factor: Bristan Group Limited

WRAS Approval Number  1009402

Print this entry

Two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) with a quarter turn ceramic disc headwork and lever operating members. The spout incorporates a plastic flow straightener and is supplied with metal backnuts. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: ¾" BSP (M)

Model: ET 123

Marking: Essential on body.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Bathrooms

WRAS Approval Number  1112358

Print this entry

Two hole, metal, single outlet (fixed) combination tap assembly (chromium plated brass), Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: ET 131

Marking: Essential on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Bathrooms

WRAS Approval Number  1207025

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets

Model: BL BF C

Marking: U (vendor) & xxxx (replaced by numerical digits to indicate batch code) on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Home Well Industrial (Hui Yang) Co. Ltd.

Factor: Bristan Group Limited

WRAS Approval Number  1212043

Print this entry

Two hole, single outlet (fixed), combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C

Size: ¾” BSP male inlet connections

Model: JY02814

Marking: 'Joyou' on body.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: Joyou Group Building Materials Co Ltd

Factor:  

WRAS Approval Number  1205030

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork’s and single lever operating members. The spout outlet incorporates a plastic aerator & the product is supplied with metal backnuts. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Size: ¾” BSP male inlets.

Model: 230421.

Marking: Viergou, `H` or `C` on operating members.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Kaiping Vigor Sanitary Wares Co, Ltd

Factor:  

WRAS Approval Number  1007023

Print this entry

Two hole single outlet (fixed) combination tap assembly (chromium plated brass) with a ceramic cartridge headwork and single lever operating member (chromium plated brass). The spout outlet incorporates a plastic aerator. Supplied with brass backnuts. Both hot and cold inlets are fitted with a stainless steel strainer.

Size: Stainless steel braided EPDM lined hose assembly with a ½ captive nut end connector.

Model: WF 2862.1H1.50

Marking: American Standard etched into operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: American Standard (Jiangmen) Fittings Co Ltd

Factor:  

WRAS Approval Number  1007021

Print this entry

2 hole single outlet (fixed) combination tap assembly (chromium plated brass) with a ceramic cartridge headwork and single lever operating member (chromium plated brass). The spout outlet incorporates a plastic aerator. Supplied with brass backnuts. Both hot and cold inlets are fitted with a stainless steel strainer.

Size: Stainless steel braided EPDM lined hose assembly with a ½" captive nut end connector.

Model: WF 1962.1H1.50

Marking: American Standard etched into operating member.American Standard etched into aerator.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: American Standard (Jiangmen) Fittings Co Ltd

Factor:  

WRAS Approval Number  1007018

Print this entry

2 hole single outlet (fixed) combination tap assembly (chromium plated brass) with a ceramic cartridge headwork and single lever operating member (chromium plated brass). The spout outlet incorporates a plastic aerator. Supplied with brass backnuts. Both hot and cold inlets are fitted with a stainless steel strainer.

Size: Stainless steel braided EPDM lined hose assembly with a ½" captive nut end connector.

Model: WF 1961.1H1.50

Marking: American Standard etched into aerator.American Standard etched into operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: American Standard (Jiangmen) Fittings Co Ltd

Factor:  

WRAS Approval Number  1009026

Print this entry

Wall mounted two hole single outlet (fixed) combination tap assembly (chromium plated brass) with a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: ½” female BSP inlets.

Model: WF-2863.1H1.50- IDS Natural wall mounted basin mixer.

Marking: American Standard on face plate.

Installation Requirements : R001 R006 R010 R040     

Note:  

Proviso:  

Manufacturer: American Standard (Jiangmen) Fittings Co Ltd

Factor:  

WRAS Approval Number  1004004

Print this entry

`Markwik 21` sequential thermostatic mixing tap with chromium plated brass body with single sequential thermostatic cartridge controlling both flow and temperature via a single lever operating member (chromium plated brass). Inlets incorporate Neoperl single check valve cartridges (suitable for backflow protection against Fluid Category 2) sterilisation ports and ball valves, supplied with brass backnuts. Maximum working pressure 5.0 bar.

Size: ½" BSP male inlets.

Model: Markwik 21 - A4803AA.

Marking: Armitage Shanks etched into indice.

Installation Requirements : R001 R006 R040       

Note:  

Proviso:  

Manufacturer: Ideal Standard Prodiktions GmbH

Factor: Armitage Shanks

WRAS Approval Number  1209117

Print this entry

Range of two hole single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork and single lever or cross top operating members. The spout outlets incorporate a plastic flow straightener & the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP female inlets

Model: B9883AA Sandringham 21 (single lever operating members).

Marking: ISI on body

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Armitage Shanks

WRAS Approval Number  1107005

Print this entry

Range of wall mounted, two hole, single outlet, fixed combination tap assemblies (chromium plated brass) incorporating a sequential thermostatic cartridge controlling both flow and temperature with single lever operating member. The spout outlets incorporate plastic aerators. Supplied with 15mm compression screw driver operated isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: Stainless steel braided EPDM lined hose assembly supplied with 15mm compression isolation valves.

Model: S7422AA Contour 2 (150mm spout) & S7423AA Contour 2 (220mm spout).

Marking: Armitage Shanks on operating member.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Vidima AD

Factor: Armitage Shanks

WRAS Approval Number  1003033

Print this entry

`Markvik 21` sequential thermostatic mixing tap (chromium plated brass) with single sequential thermostatic cartridge controlling both flow and temperature via a single lever operating member (chromium plated brass). Outlet incorporates a plastic flow straightener. Both hot and cold inlets incorporate Neoperl single check valve cartridges (suitable for backflow protection against Fluid Category 2) and sterilisation take off unit. Supplied with brass backnuts. Maximum working pressure 5.0 bar.

Size: ½" BSP male inlets.

Model: A4553AA Markwik 21

Marking: Armitage Shanks etched into indice.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Ideal Standard International

Factor: Armitage Shanks

WRAS Approval Number  1111309

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP (M)

Model: CDG22T0011

Marking: Avonflow on body

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1102003

Print this entry

Two hole, single outlet fixed combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork & single lever operating members. The spout outlet incorporates a plastic flow straightener, supplied with metal backnuts. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: Oval OL BF C.

Marking: Bristan on operating members & ST MM/YY (month and year of manufacture) on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer:  

Factor: Bristan Group Limited

WRAS Approval Number  1107023

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Size: ¾” BSP male inlets.

Model: QD BF C.

Marking: LC and month and year of manufacture on body.Bristan on operating member.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: M & Z Spa

Factor: Bristan Group Limited

WRAS Approval Number  0909008

Print this entry

2 hole single outlet (fixed) combination tap assembly (chromium plated brass) with non-rising spindle headworks and can be supplied with either dome or cross top operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP inlets.

Model: VAC BF C NH, VAC BF CMT and VAX BF C.

Marking: XZ 24 stamped into headworks.

Installation Requirements : R001 R005 R010       

Note:  

Proviso:  

Manufacturer: Xiamen Zhongyu Hardware Industry Co Ltd

Factor: Bristan Group Limited

WRAS Approval Number  1107015

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork`s and single lever operating members. The spout outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 10bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: FA BF C.

Marking: Bristan on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Guangdong Huayi Plumbing Fittings Industry Co Ltd

Factor: Bristan Group Limited

WRAS Approval Number  0912011

Print this entry

2 hole single outlet (fixed) combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headworks and a range of single lever operating members (chromium plated brass). The spout outlet incorporates a plastic flow straightener. Supplied with brass backnuts.

Size: ¾" BSP inlets.

Model: VAL BF C CD - short single lever. VAL BF C 6 CD - long single lever.

Marking: BS 5412 CD XZ 24 stamped into headworks.H1009 etched into body.

Installation Requirements : R001 R006 R010 .     

Note:  

Proviso:  

Manufacturer: Xiamen Zhongyu Hardware Industry Co Ltd

Factor: Bristan Group Limited

WRAS Approval Number  1105030

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: ¾” BSP Male Inlets

Model: CU BF C.

Marking: `WQ` and month and year of manufacture on body. `Bristan` on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Kaiping Weixiang Metals Products Ind Co

Factor: Bristan Group Limited

WRAS Approval Number  1102005

Print this entry

Two hole, metal, single outlet fixed combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headwork’s and single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar & maximum operating temperature 70°C.

Size: ¾” BSP male inlets.

Model: NR BF C

Marking: SG on body.Bristan on operating member.

Installation Requirements : R001 R006 R010