Section 0681

Print Entire Section

Combination Tap Assemblies

Miscellaneous

WRAS Approval Number  1212036

Print this entry

Range of single hole, single outlet (fixed) electronically controlled, tap assemblies (brushed stainless steel). Flow is controlled via a solenoid valve, activated by an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Size: DN8 stainless steel braided, PEX lined, flexible hoses with 15mm spigot end connections

Model: Aquarius Automatic Tap - mains and battery operated AT03 Deck mounted A32 AT03 Deck mounted A45 AT03 Deck mounted A45 DOC M AT03 Deck mounted High neck AT03 Deck mounted Short neck

Marking: 'DVS' on tap head

Installation Requirements : R001 R006 R009       

Note:  

Proviso:  

Manufacturer: Dart Valley Systems Ltd

Factor:  

WRAS Approval Number  1301013

Print this entry

Single hole, single outlet (fixed) electronically controlled combination tap assembly (chromium plated brass). The flow is controlled via a sensor operated solenoid valve and the temperature is controlled via a single lever operating member. The spout outlet incorporates a plastic aerator & both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless Steel braided PEX lined hose assemblies incorporating 3/8” BSP captive nut end connections.

Model: 6150F Oras electra, 6v.

Marking: `Oras` logo and date of manufacture (YY/letter A to L - where A = January through to L = December) on body.

Installation Requirements : R001 R006 R009       

Note:  

Proviso:  

Manufacturer: Oras Ltd.

Factor:  

WRAS Approval Number  1112309

Print this entry

Range of single hole, metal single outlet (fixed) infra red tap assemblies consisting of a chromium plated spout and concealed control box, incorporating a normally closed solenoid valve. The tap body incorporates a sensor that activates the solenoid valve, and a stainless steel strainer and plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Size: ½” BSP captive nut.

Model: IR 100 LIF, IR 100 TE, IR 100 SOH, IR 100 PRO & IR 100 ZOO

Marking: VADO on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: VADO

Factor:  

WRAS Approval Number  1112025

Print this entry

`Vola 4100` concealed wall mounted electronically controlled blending valve (brass body). The flow is controlled via a solenoid valve actuated via an infra-red sensor and the temperature is controlled independently via a ceramic cartridge headwork. Inlets incorporate stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided SPX lined hose assemblies with 3/8” BSP inlet connections.

Model: Vola 4100 electronic mixing valve.

Marking: Vola on control box.Vola on EPDM membrane.

Installation Requirements : R001 R040         

Note: Spout outlet not supplied.

Proviso:  

Manufacturer: Vola A/S

Factor:  

WRAS Approval Number  1112023

Print this entry

`Vola RB1E` single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass) the flow is controlled via a solenoid valve activated via infra red sensors. The spout outlet incorporates a plastic aerator & the inlet incorporates stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided SPX lined hose assemblies with 3/8” BSP captive nut end connections.

Model: Vola RB1E electronic mixing valve.

Marking: Vola on control box and operating member.

Installation Requirements : R001 R006         

Note: Single supply only.

Proviso:  

Manufacturer: Vola A/S

Factor:  

WRAS Approval Number  1112022

Print this entry

`Vola HV1E` single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass). The flow is controlled via a solenoid valve activated via an infra-red sensor & the temperature is controlled independently via a ceramic cartridge with dome operating member. Inlets incorporate stainless steel strainers & the spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided SPX lined hose assemblies with 3/8” BSP captive nut end connections.

Model: Vola HV1E electronic mixing valve.

Marking: Vola on control box and operating member.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Vola A/S

Factor:  

WRAS Approval Number  1112319

Print this entry

Overhead shower outlet with a chromium plated brass body and EPDM `O` rings. Maximum operating temperature 70°C.

Size: ½” BSP (F)

Model: Axor 28 494 xxx

Marking: Hansgrohe on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1203011

Print this entry

‘Avon 21` wall mounted concealed shower valve with cast brass body and EDPM `O` rings incorporating a self closing, spring loaded headwork with dome operating member controlling the flow. Inlets incorporate stainless steel filters and single check valve cartridges (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP female inlets/outlets

Model: B8266AA - Avon 21 shower valve.

Marking: `Armitage Shanks` on operating member.

Installation Requirements : R001 R010 R040       

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer:  

Factor: Armitage Shanks

WRAS Approval Number  1304019

Print this entry

Range of single hole, single outlet (fixed) infra-red tap assemblies consisting of a chromium plated spout and concealed control box, incorporating a normally closed solenoid valve. The tap body incorporates a sensor that activates the solenoid valve, and a stainless steel strainer. Supplied with a metal backnut. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Size: Control box has 15mm male compression connections

Model: TK-201LT15 and TK-201LT42

Marking: TCK® on body.

Installation Requirements : R001 R006 R009 R010     

Note:  

Proviso:  

Manufacturer: Xiamen OLT Co Ltd

Factor:  

WRAS Approval Number  1205107

Print this entry

`Dolphin Blue` range of single hole, single outlet (fixed) electronically controlled tap assemblies (satin or chromium plated brass). Flow is controlled with a solenoid valve activated via infra-red sensor. The spout outlets incorporate plastic aerators and the inlets incorporate stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel braided PEX lined hose assembly with 3/8” BSP captive nut end connections.

Model: DB100C, DB100S, DB125C & DB125S.

Marking: Dolphin logo on body.

Installation Requirements : R001 R040         

Note:  

Proviso: Inlet connection hose must be installed where light is excluded.

Manufacturer:  

Factor: Bell-Chem Products Company

WRAS Approval Number  1210001

Print this entry

Range of chromium plated brass wall elbows incorporating double check valve cartridges at the inlet (suitable for backflow protection against fluid category 3) For open outlet use only. Maximum operating temperature 80°C.

Size: ½” BSP male inlet

Model: 28.450.720 & 28.450.625

Marking: 'Dornbracht' logo on faceplate

Installation Requirements : R001           

Note: Open outlet use only

Proviso:  

Manufacturer:  

Factor: Aloys F Dornbracht GmbH & Co KG

WRAS Approval Number  1203039

Print this entry

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with electronically controlled touch free operation headwork’s. Models 32 110 000 & 32 112 000 incorporate a manually operated temperature control. The spout outlets incorporate plastic aerators, inlet hoses incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) & the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel braided PEX lined hose assemblies incorporating 3/8” captive nuts end connections.

Model: 32 110 000 Hansgrohe Talis S2 electronic basin mixer (battery, water mixing).32 111 000 Hansgrohe Talis S2 electronic basin mixer(battery no water mixing)32 112 000 Hansgrohe Talis S2 electronic basin mixer(electric adapter water mixing)32 113 000 Hansgrohe Talis S2 electronic basin mixer(electric adapter, no water mixing)

Marking: Hansgrohe on head of tap. Product information on control box body.

Installation Requirements : R001 R006         

Note: Inlet connection hoses must be installed where light is excluded.

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1301087

Print this entry

Single hole, single outlet (fixed) electronically controlled combination tap assembly (chromium plated brass). The flow is controlled via a sensor operated solenoid valve and the temperature is controlled via a single lever operating member. The spout outlet incorporates a plastic aerator & both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless Steel braided PEX lined hose assemblies incorporating 3/8” BSP captive nut end connections.

Model: Rada Tripoint F.

Marking: Rada logo on body.

Installation Requirements : R001 R006 R009       

Note:  

Proviso:  

Manufacturer:  

Factor: Kohler Mira Ltd

WRAS Approval Number  1112027

Print this entry

Two hole, metal, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headwork with single lever or cross top operating members and manual diverter to shower outlet. The spout outlet incorporates a plastic aerator & the product is supplied with a shower handset and hose assembly. The shower handset incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: ½” BSP male inlets.

Model: 25.943.882 & 25.943.892.

Marking: Dornbracht on headwork’s and shower handset.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Aloys F Dornbracht GmbH & Co KG

Factor:  

WRAS Approval Number  1212037

Print this entry

Single hole, single outlet (fixed) electronically controlled, tap assembly assemblies (brushed stainless steel). Flow is controlled via solenoid valve, activated by an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Size: Stainless steel braided, PEX lined, flexible hose with 15mm spigot end connection.

Model: Aquarius Automatic Tap- AT02 wall mounted Straight (Mains and battery operated)

Marking: 'DVS' on tap head

Installation Requirements : R001 R009 R040       

Note:  

Proviso:  

Manufacturer: Dart Valley Systems Ltd

Factor:  

WRAS Approval Number  1212014

Print this entry

Sensorflow 21 range of wall mounted electronically controlled, tap assemblies (chromium plated brass). Flow is controlled via solenoid valve, activated by an infra-red sensor. The spout outlet incorporates a plastic aerator and is supplied with an optional flow straightener. Maximum working pressure 8.6 Bar. Maximum operating temperature 65°C.

Size: 10mm compression copper tail.

Model: A4178AA Sensorflow 21 (Mains). A4179AA Sensorflow 21 (Link). A4125AA Sensorflow 21 (Battery).

Marking: 'ISI' on body

Installation Requirements : R001 R040         

Note:  

Proviso: Solenoid to be installed where light is excluded

Manufacturer: Ideal Standard Produktions - GmbH

Factor: Armitage Shanks

WRAS Approval Number  1201020

Print this entry

‘Ondus’ range of single hole, single outlet (fixed) electronically controlled combination tap assemblies (brass body, with either chrome, velvet black, moon white or titanium finish) activated by infra-red sensors. The spout outlets incorporate plastic flow straighteners. Maximum working pressure 7.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided PEX lined hose assembly with 3/8” BSP captive end nut connectors.

Model: Grohe Ondus range. 36.060.000 (chrome - display only) and following colour variants: 36.060.KS0 (velvet black). 36.060.LS0 (moon white). 36.060.BS0 (titanium). 36.061.000 (chrome - display and remote control) and following colour variants: 36.061.KS0 (velvet black). 36.061.LS0 (moon white). 36.061.BS0 (titanium). 36.043.000 (chrome - remote control only) and following colour variants: 36.043.KS0 (velvet black). 36.043.LS0 (moon white). 36.043.BS0 (titanium). 36.044.000 (chrome - remote control only and is for free standing basins hence have longer spout and associated brass adaptor) and following colour variants: 36.044.KS0 (velvet black). 36.044.LS0 (moon white). 36.044.BS0 (titanium).

Marking: `Grohe` on body.

Installation Requirements : R001 R006 R010       

Note: Inlet connection hoses must be installed where light is excluded.

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1210305

Print this entry

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with electronically controlled touch free operation headworks. The spout outlets incorporate plastic aerators & the inlet hoses incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2). The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Size: Stainless steel, PEX lined hose assemblies with 3/8” captive nut.

Model: 15 170 000 Hansgrohe PurVida (with temp control, battery operated). 15 171 000 Hansgrohe PurVida (battery operated). 15 172 000 Hansgrohe PurVida (with temp control, mains operated). 15 173 000 Hansgrohe PurVida (mains operated).

Marking: Hansgrohe on body

Installation Requirements : R001 R006         

Note: Inlet hoses to be installed where light is excluded

Proviso:  

Manufacturer:  

Factor: Hansgrohe SE

WRAS Approval Number  1210303

Print this entry

Range of single hole, single outlet (fixed) electronically controlled combination tap assemblies (chromium plated) activated by infra-red sensors. The spout outlets incorporate plastic aerators & the inlets incorporate single check valve cartridges (suitable for backflow prevention up to fluid category 2). Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

Size: ½” BSP (F)

Model: 16 180 180 Basic Set Axor Electronic Mixer for concealed installation. 38 119 000 Axor Uno2 (short spout). 38 120 000 Axor Uno2 (long spout). 39 117 000 Axor Citterio (short spout). 39 118 00 Axor Citterio (short spout).

Marking: Electronic, Axor Hansgrohe on backplate

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Hansgrohe SE

WRAS Approval Number  1210301

Print this entry

Wall mounted brass body valve (chromium plated brass) incorporating a ceramic disc type headwork and single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: ½” BSP (M)

Model: Vola S10

Marking: VOLA on operating member

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Vola A/S

Factor:  

WRAS Approval Number  1212035

Print this entry

AT04 single hole, single outlet (fixed) wall mounted electronically controlled tap assembly (chromium plated brass). The flow is controlled via a solenoid valve activated via infra-red sensors & the spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: 10mm copper tails.

Model: AT04.

Marking: DVS logo on indice. DVSAT04-001 on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Dart Valley Systems Ltd

Factor:  

WRAS Approval Number  1203340

Print this entry

Wall mounted, thermostatically controlled concealed blending valve (chromium plated brass), incorporating manually operated thermostatic temperature and flow controls. Both inlets incorporate a single check valve & the product is supplied with overhead shower outlet and arm. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: ½” BSP (M)

Model: 78015-0001 Thermostatic Shower Mixer

Marking: Lota on back plate.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1203338

Print this entry

Plastic shower handset (chromium plated) with a flow adjuster from flow straightener to spay outlet. Maximum operating temperature 85°C.

Size: ½” BSP (M)

Model: Shower L3101TA003GD

Marking: AVONFLOW on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Avonflow Sanitary Products Ltd.

Factor:  

WRAS Approval Number  1304021

Print this entry

Floor mounted, free standing shower assembly (chromium plated brass body) with ceramic cartridge headwork controlling both flow and temperature with single lever operating member and self-cancelling diverter to hand shower outlet. The diverter to hand shower outlet also incorporates a single check valve cartridge (suitable for backflow protection against fluid category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: ½” BSP female end connections on baseplate

Model: VOLA FS3

Marking: 'Vola' on diverter operating member

Installation Requirements : R001 R010 R030 R040     

Note: The product is supplied with a shower handset and hose

Proviso:  

Manufacturer: Vola A/S

Factor:  

WRAS Approval Number  1203329

Print this entry

Four hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members and a manual diverter to shower outlet. The product is supplied with metal backnuts. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Size: ¾” BSP (M)

Model: 144047

Marking: MB on body

Installation Requirements : R001 R006 R040 R160     

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: Mayfair Brassware Industry Co Ltd

Factor: Quanzhou Mayfair Brassware Industry Co Ltd

WRAS Approval Number  1210027

Print this entry

Range of electronically controlled spout outlets (chromium plated or stainless steel finish) operated via an infra-red sensor and solenoid valve. The spout outlets incorporate a plastic aerator or optional flow straightener and the products are supplied with a metal backnut, a brass adaptor with 3/8” - ½” BSP coupler and a stainless steel strainer. Maximum working pressure 8.6 bar. Maximum operating temperature 70°C.

Size: 15mm compression inlets.

Model: A4852AA Sensorflow21 compact. A4853AA Sensorflow21 compact. A4851AA Sensorflow21 compact. A4852GN Sensorflow21 compact. A4853GN Sensorflow21 compact. A4851GN Sensorflow21 compact.

Marking: Armitage Shanks, address and box model, pressure rating, CE & technical information on electrical housing.

Installation Requirements : R001 R006 R010       

Note:  

Proviso: The solenoid is to be installed where light is excluded.

Manufacturer:  

Factor: Armitage Shanks

WRAS Approval Number  1207021

Print this entry

Axor Starck range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with sensor controlled touch free operation headwork’s. Models 10 101 000 & 10 140 000 incorporate a manually operated temperature control. The spout outlets incorporate plastic aerators. Inlet hoses incorporate stainless steel strainers and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided PEX lined hose assemblies incorporating 3/8” captive nuts end connections.

Model: Axor Starck 10 101 000, 10 106 000, 10 140 000 & 10 145 000.

Marking: Axor Hansgrohe & PIX 18741/1A cUPC on body.

Installation Requirements : R001 R006 R010       

Note:  

Proviso: Inlet hoses to be installed where light is excluded.

Manufacturer: Hansgrohe SE

Factor:  

WRAS Approval Number  1304018

Print this entry

Range of single hole, single outlet (fixed) infra-red tap assemblies consisting of a chromium plated spout and concealed control box, incorporating a normally closed solenoid valve. The tap body incorporates a sensor that activates the solenoid valve, and a stainless steel strainer or aerator at the spout outlet. The products are supplied with metal backnuts. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Size: Control box has 15mm male compression connections

Model: TK-205LT12 and TK-201LT48

Marking: TCK® on body

Installation Requirements : R001 R006 R010 R040     

Note:  

Proviso:  

Manufacturer: Xiamen OLT Co Ltd

Factor:  

WRAS Approval Number  1304017

Print this entry

Range of single hole, single outlet (fixed) infra-red tap assemblies consisting of a chromium plated spout and concealed control box, incorporating a normally closed solenoid valve. The tap body incorporates a sensor that activates the solenoid valve, and a stainless steel strainer. Supplied with a plastic backnut. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Size: Control box has 15mm male compression connections

Model: TK-201LT35 and TK-201LT49.

Marking: TCK® on control box

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Xiamen OLT Co Ltd

Factor:  

WRAS Approval Number  1302337

Print this entry

Range of valves with brass bodies, quarter turn ceramic disc headworks and single lever or cube operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: ¾” BSP (M)

Model: KL350DC (single lever operating members) & WS350DC (cube operating members).

Marking: KL350 or WS350 on cover plate.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer:  

Factor: Crosswater Holdings Ltd

WRAS Approval Number  1212038

Print this entry

Range of single hole, single outlet (fixed) electronically controlled, tap assemblies (chromium plated brass). Flow is controlled via solenoid valve, activated by an infra-red sensor & the spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Size: DN8 stainless steel braided, PEX lined, flexible hoses with 15mm spigot end connections.

Model: AT03 Deck mounted tall pillar (Mains and battery operated) AT03 Deck mounted short pillar tap (Mains and battery operated)

Marking: 'DVS' logo on tap head. Serial number and technical information on sensor cable.

Installation Requirements : R001 R006 R009       

Note:  

Proviso: Inlet hoses to be installed where light is excluded

Manufacturer: Dart Valley Systems Ltd

Factor:  

WRAS Approval Number  1212013

Print this entry

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled via a solenoid valve activated via an infra-red sensor & the temperature is controlled independently via a sequential cartridge with single lever operating member. The spout outlets incorporate a plastic aerator and the products are supplied with screwdriver operated spherical valves which incorporate stainless steel filters and a metal backnut. Maximum working pressure 8.6 bar. Maximum operating temperature 85°C.

Size: ½” BSP female inlets.

Model: A4176AA Sensorflow 21 (Mains). A4177AA Sensorflow 21 (Link). A4124AA Sensorflow 21 (Battery).

Marking: `Armitage Shanks` on operating member.

Installation Requirements : R001 R006 R010       

Note:  

Proviso: Solenoid to be installed where light is excluded.

Manufacturer: Ideal Standard Produktions - GmbH

Factor: Armitage Shanks

WRAS Approval Number  1212302

Print this entry

Range of hose connection elbows with a plastic body. Some models incorporate a single check valve cartridge (suitable for protection up to fluid category 2). Maximum operating temperature 70ºC. For open outlet use only.

Size: ½” BSP (M)

Model: 27 453 000 Hose connection Hansgrohe S, 27 454 000 Hose connection Hansgrohe, 35 884 000 Hose connection Axor Steel, 16 884 000 Hose connection with check valve Axor Montreux, 27 451 000 Hose connection with check valve Axor Starck, 27 456 000 Hose connection with check valve Hansgrohe S, 27 458 000 Hose connection with check valve Hansogrohe & 35 888 000 Hose connection with check valve Axor Steel.

Marking: Hansgrohe on body

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Hansgrohe SE

WRAS Approval Number  1212301

Print this entry

Range of combined overflow waste bath filler assemblies. The bath filler outlet is in the centre of the overflow and so an air gap cannot be maintained. Maximum operating temperature 85°C.

Size: ½” BSP (M)

Model: WG-61552/S-C/P & WG-61552/E-C/P

Marking: Vado on body

Installation Requirements : R001 R160         

Note: Open outlet use only.

Proviso: For use only where level of risk is no greater than Fluid Category 3.

Manufacturer:  

Factor: Vado

WRAS Approval Number  1301036

Print this entry

Range of chromium plated brass wall elbows incorporating check valve cartridges at the inlet (suitable for backflow protection against fluid category 2). For open outlet use only. Maximum operating temperature 80°C.

Size: ½” BSP male inlet

Model: 28.450.670, 28.450.710, 28.450.730 & 28.450.980

Marking: 'Dornbracht' logo on body.

Installation Requirements : R001 R040         

Note: Open outlet use only

Proviso:  

Manufacturer:  

Factor: Aloys F Dornbracht GmbH & Co KG

WRAS Approval Number  1012064

Print this entry

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated or chrome satin finish) activated via infra red sensors The spout outlets incorporate plastic aerators & the products are supplied with stainless steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel braided SPX lined hose assembly with 3/8” BSP captive nut end connectors.

Model: L991C, L991CS, L991CP & L991CSP (battery operated). L992C, L992CS, L992CP & L992CSP (mains operated).

Marking: Lovair on body.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer:  

Factor: Lovair Limited

WRAS Approval Number  1209030

Print this entry

Deck mounted, free standing combination tap assembly (chromium plated brass body) with ceramic cartridge headwork and a self cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The diverter to single shower outlet incorporates a single check valve cartridge with flow regulator. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Size: ½” BSP female end connections on base plate.

Model: VOLA FS1.

Marking: `Vola` on diverter operating member.

Installation Requirements : R001 R030         

Note:  

Proviso:  

Manufacturer: Vola A/S

Factor:  

WRAS Approval Number  1209024

Print this entry

Wall mounted shower mixing valve with chromium plated brass body and EPDM `O` rings incorporating a self closing, spring loaded headwork controlling both temperature and flow with a single lever operating member. Inlets incorporate stainless steel filters and single check valve cartridges (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP female inlets.

Model: B8265AA - Avon 21 shower mixer.

Marking: `Armitage Shanks` & `Press` on operating member.

Installation Requirements : R001 R010 R040       

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: Vidima AD.

Factor: Armitage Shanks

WRAS Approval Number  1112024

Print this entry

`Vola 4000` wall mounted concealed outlet mounting frame & flow control box. Flow is controlled via a solenoid valve activated via an infra-red sensor. Inlets incorporate stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Size: 3/8” BSP male inlet.

Model: Vola 4000 electronic valve.

Marking: Vola on control box.Vola on EPDM membrane.

Installation Requirements : R001 R040         

Note: Single supply only. Spout outlet not supplied.

Proviso:  

Manufacturer: Vola A/S

Factor:  

WRAS Approval Number  1207326

Print this entry

Shower diverter set incorporating a manual diverter valve, fixed shower head and shower hose and handset. Maximum operating temperature 65?C.

Size: ½”BSP (M)

Model: 78027-0001.

Marking: KV01315 and direction of flow arrow on diverter body.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1205318

Print this entry

IRN R001, R010, R040 Brass body valve incorporating a ceramic disc type headwork. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Size: ¾”BSP (M)

Model: V207-IS-XX Rough Concealed ¾ Control Valve V207-TX-XX Cross Top V207-TM-XX Metal Lever V207-TC-XX Ceramic Lever V207-TW-XX Wooden Lever V207-TGB-XX “Organic” Black Crystal Lever V207-TGC-XX “Organic” Clear Crystal Lever V207-TSB-XX “Geometric” Black Crystal Lever V207-TSC-XX “Geometric” Clear Crystal Lever Please note the suffix 'XX' will be replaced with the following finish acronym: CP - Chrome plated, AG - Antique gold, PN - Polished nickel & SSF - Stainless steel finish

Marking: Samuel Heath on back plate

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Samuel Heath & Sons Plc

Factor:  

WRAS Approval Number  1205098

Print this entry

Single outlet, swivel, combination tap accessory (chromium plated brass) incorporating rising spindle headwork and single lever operating member. Outlet incorporates a stainless steel filter. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Size: 3/8” BSP male inlet

Model: `Pre-rinse` - 98-A.

Marking: ‘Pre-Rinse’ and logo on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Yuhuan Meisheng Sanitaryware Co. Ltd

Factor:  

WRAS Approval Number  1205324

Print this entry

Range of plastic shower handsets. Maximum operating temperature 70°C.

Size: ½” BSP (M)

Model: 28.580 000 Hansgrohe Croma 100 hand shower.28.583 000 Hansgrohe Croma 100 EcoSmart Shower.

Marking: Hansgrohe on body

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1205327

Print this entry

Range of single hole, metal single outlet (fixed) infra red tap assemblies consisting of a chromium plated brass spout and concealed control box, incorporating a normally closed solenoid valve. The tap bodies incorporate a sensor that activates the solenoid valve. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided PEX lined hose assembly incorporating 3/8” BSP captive nut.

Model: Grohe Essence E 36.089 & 36.093. Grohe Allure E 36.096 & 36.099.

Marking: Grohe on body

Installation Requirements : R001 R006 R010       

Note:  

Proviso: Inlet hoses must be installed where light is excluded.

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1205328

Print this entry

Two hole, single outlet wall mounted infra red tap assemblies consisting of a chromium plated brass spout and concealed control box, incorporating a normally closed solenoid valve. The tap bodies incorporate a sensor that activates the solenoid valve. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Size: ½” BSP (M)

Model: Essence E 36.252.Allure E 36.235.

Marking: Grohe on infra red sensor.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1210080

Print this entry

`Airblade` single hole, single outlet (fixed) electronically controlled tap (stainless steel). The flow is controlled via solenoid valves activated via infra-red sensors. The spout outlet incorporate plastic aerators and the inlet incorporate stainless steel strainers. The units incorporate a control box. Maximum working pressure 8.0 bar. Maximum operating temperature 43°C.

Size: ½” BSP male inlets

Model: AB11

Marking: AB11 - Dyson, serial no. product info on body & Dyson on front panel of control box.

Installation Requirements : R001 R009 R040       

Note:  

Proviso:  

Manufacturer:  

Factor: Dyson Ltd.

WRAS Approval Number  1205075

Print this entry

`Sensor` range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled with a solenoid valve activated via infra-red sensor. The spout outlets incorporate plastic aerators and the inlets incorporate stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Size: 10mm spigot inlet.

Model: Sensor B & Sensor E.

Marking: Stern on body.

Installation Requirements : R001 R040         

Note:  

Proviso: Inlet connections hoses must be installed where light is excluded.

Manufacturer: Stern Engineering Ltd

Factor:  

WRAS Approval Number  1207020

Print this entry

Axor Starck range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with sensor controlled operation headwork. Models 10 170 000 & 10 180 000 incorporate a manually operated temperature control. The spout outlets incorporate flow regulators, plastic aerators and the products are supplied with alternative splash spray inserts. Inlet hoses incorporate stainless steel strainers and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided PEX lined hose assemblies incorporating 3/8” captive nuts end connections.

Model: Axor Starck 10 170 000 & 10 175 000, 10 180 000 & 10 185 000

Marking: Axor Hansgrohe & PIX 18848/IO cUPC on body.

Installation Requirements : R001 R006 R010       

Note: Inlet connection hoses must be installed where light is excluded

Proviso:  

Manufacturer: Hansgrohe SE

Factor:  

WRAS Approval Number  1203307

Print this entry

Range of single hole, metal single outlet (fixed) infra red tap assemblies consisting of a chromium plated brass spout and concealed control box, incorporating a normally closed solenoid valve. The tap body incorporates a sensor that activates the solenoid valve, and a plastic aerator. Supplied with or without a pop - up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: Stainless steel braided PVC lined hose assembly incorporating 3/8” BSP captive nut.

Model: Essence E 36.088 with plug transformer. 36.091 with pop - up waste. 36.092 with battery. 36.094 with battery and pop-up waste. Allure E 36.095 with the same electronics and solenoid valve as 36.088 but different spout. 36.097 with pop- up waste. 36.098 with battery. 36.234 with battery and pop - up waste.

Marking: Grohe, made in Germany, date of manufacture (YY/MM) and Grohe code (02) on body

Installation Requirements : R001 R006 R010       

Note: No testing carried out on pop - up waste. Inlet hoses must be installed where light is excluded.

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1210079

Print this entry

`Airblade` range of single hole, single outlet (fixed) electronically controlled tap (stainless steel). The flow is controlled via solenoid valves activated via infra-red sensors. The spout outlets incorporate plastic aerators and the inlets incorporate stainless steel strainers. The units incorporate a control box. Maximum working pressure 8.0 bar. Maximum operating temperature 43°C.

Size: ½” BSP male inlets

Model: AB09 & AB10

Marking: AB09 - Dyson, Serial No & product info on body. Dyson, serial no. product info on body & Dyson on front panel of control box. AB10 - Dyson, serial no. product info on body & Dyson on front panel of control box.

Installation Requirements : R001 R006 R009       

Note:  

Proviso:  

Manufacturer:  

Factor: Dyson Ltd.

WRAS Approval Number  1206011

Print this entry

Pre-rinse deck mounted single feed spout outlet assembly with flexible hose and pre-rinse wash down spray handset (chromium plated brass body) incorporating a trigger operated self- closing headwork and EPDM washer. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Size: 20mm captive nut

Model: “Meisheng” deck mounted 98000

Marking: “Pre-rinse” logo on body

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Yuhuan Meisheng Sanitary Ware Co., Ltd

Factor:  

WRAS Approval Number  1206013

Print this entry

Pre-rinse wash down spray assembly with a chromium plated brass body incorporating a trigger operated self-closing headwork and EPDM washer. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C

Size: 20mm male thread inlet

Model: H98-SW1 spray outlet incorporating 98-sv self-closing cartridge

Marking: “Pre-rinse” logo on body

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Yuhuan Meisheng Sanitary Ware Co., Ltd

Factor:  

WRAS Approval Number  1111031

Print this entry

Wall mounted, two hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a stainless steel aerator. Also incorporates a manual diverter to shower outlet which is controlled by swivelling the spout. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP Male x ¾” BSP male offset unions.

Model: WF – 1911.

Marking: American Standard on operating member.

Installation Requirements : R001 R010 R040       

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: American Standard (Jiangmen) Fittings Co Ltd

Factor:  

WRAS Approval Number  0807001

Print this entry

`Selectronic` thermostatic wall mounted bar type shower mixing valve with chrome plated body. The valve incorporates seperate controls for temperature and flow. The temperature is controlled via a ceramic cartridge headwork incorporating a manual override with lever operating member (chromium plated brass). Flow is controlled via a ceramic disc headwork with lever operating member (chromium plated brass). Both hot and cold water inlets incorporate single check valves (Neoperl OV15) and stainless steel strainers. Maximum working pressure 7.0 bar (shower accessories not supplied).

Size: 15mm copper tube

Model: Selectronic

Marking: Redring STL1 printed onto body

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Applied Energy Products Ltd

Factor:  

WRAS Approval Number  0810300

Print this entry

Plastic shower handset with a flow adjuster built in to the outlet discharge.

Size: ½" BSP Male inlet connection.

Model: SH0407232.

Marking: Body printed Aquamate.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Dongguan Brand New Plastics Co Ltd

Factor: Aquamate Sanitary Ware Europe Company Ltd.

WRAS Approval Number  1102022

Print this entry

`Multiplex` waste and submerged bath filler incorporating a cable operated pop-up waste. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: 15mm compression inlet.

Model: K7812AA - Multiplex waste and bath filler.

Marking: Viega on cable housing cover (overflow) fill pipe connectors and inlet. Viega, DIN, EN274 and company logo on cable housing.

Installation Requirements : R001 R160         

Note:  

Proviso: To be installed with a double check valve on the inlets for a domestic premises, for non-domestic installations IRN R090 applies. To be installed where light is excluded.

Manufacturer: Viega GmbH & Co KG

Factor: Armitage Shanks

WRAS Approval Number  1111017

Print this entry

`Burlington` range of wall mounted two hole single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating non rising spindle headwork`s with a range of cross top operating members and manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Size: ¾” BSP female captive nuts.

Model: `Burlington` T8 and T9 with T1, T2, T3 handle variants.

Marking: `Burlington` `London` on indices and shower handsets.

Installation Requirements : R001 R010 R040       

Note: This approval includes shower hose and handset

Proviso:  

Manufacturer:  

Factor: Chenin Limited

WRAS Approval Number  0912038

Print this entry

`Ultra Rinse Gun` pre-rinse commercial wash down assembly with a chromium plated brass body, incorporating a self closing mechanism. Inlet incorporates a Neoperl single check valve cartridge (suitable for backflow protection against Fluid Category 2). Minimum working pressure 0.5 bar. Maximum working pressure 12.0 bar. Maximum working temperature 85°C.

Size: ½" BSP inlet.

Model: Ultra rinse gun..

Marking: Enware and Enware logo etched into body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Enware Australia Pty Ltd

Factor:  

WRAS Approval Number  1103013

Print this entry

`Protonic-S` range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with electronically controlled touch free operation headwork, spout outlets incorporate a plastic aerator. Some models incorporate a manually operated temperature control. Maximum working pressure 10 bar & maximum operating temperature 90°C.

Size: Both hot and cold inlets have a stainless steel braided 'PE' lined hose assembly incorporating a 3/8” BSP captive nut end connector and a single check valve cartridge (suitable for backflow protection against Fluid Category 2).

Model: Protonic-S 5201 00 23 AQUA 130 Battery Operated & 5205 01 23 AQUA 132 Mains Operated Protonic-S 5202 00 23 AQUA 131 Battery Operated & 5206 01 23 AQUA 133 Mains Operated.

Marking: Franke on body.

Installation Requirements : R001 R006         

Note: Inlet connection hoses must be installed where light is excluded.

Proviso:  

Manufacturer:  

Factor: Franke Sissons Ltd

WRAS Approval Number  1105023

Print this entry

Electronically controlled spout outlet operated via an infra red sensor and solenoid valve. The spout outlet incorporates a plastic aerator and the product is supplied with metal backnut. Maximum working pressure 10.0 bar & maximum operating temperature 90°C.

Size: ½” BSP male inlet.

Model: Protronic – Aqua109K.

Marking: Franke on spout and sensor plate.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Franke Aquarotter AG

Factor: Franke Sissons Ltd

WRAS Approval Number  0809305

Print this entry

Wall mounted chromium plated brass spout which incorporates an aerator. Maximum working pressure 10.0 bar.

Size: ½" BSP.

Model: Art 13300.

Marking: Body etched `Gessi`.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Gessi Spa

Factor:  

WRAS Approval Number  0809306

Print this entry

Control assembly for an infrared tap incorporating a solenoid valve which is activated by an infrared control. Supplied with spherical valves and SCVs for installation at the inlets to both hot and cold connections. Maximum working pressure 5.0 bar.

Size: ½" BSP.

Model: Art 30622

Marking: Body etched `Gessi`.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Gessi Spa

Factor:  

WRAS Approval Number  1109003

Print this entry

`Grohe Red Kit` with a swivel tap which incorporates an optional high temperature hot water supply, an electrically heated storage vessel. Supplied with an expansion vessel, safety control assembly consisting of a pressure reducing valve set at 3.0 bar, pressure relief valve set at 6.0 bar and single check valve. Maximum working pressure 8.0 bar. Maximum operating temperature 99°C.

Size: ½” BSP male inlet.

Model: `Grohe Red` - 30.058.

Marking: Grohe and Grohe Red on front panel of boiler.Grohe, Grohe Red and product information on back panel of boiler.Grohe on body of tap.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  0906301

Print this entry

Exafill S complete fill and overflow assembly for the installation in baths. Maximum working pressures 10 bar.

Size: ¾” BSP (F)

Model: 58.113 xxx Hansgrohe Exafill S Complete Set. 58.115.180 Hansgrohe Exafill S Basic Set. 58.116.180 Hansgrohe Exfill S Basic Set for Special bath tubs. 58.117.xxx Hansgrohe Exafill S Finish Set.

Marking: Cover etched Hansgrohe

Installation Requirements : R001 R160         

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1009343

Print this entry

Hose connection elbow with a brass body (chromium plated) for use with shower outlets. Some models incorporate a single check valve cartridge (suitable for protection up to fluid category 2). Maximum working pressure 10.0 bar and maximum working temperature 85ºC.

Size: ½" BSP (M) x ½" BSP (M)

Model: 27 453 xxx Hose Connection Hansgrohe, S27 454 xxx Hose Connection Hansgrohe, 35 884 xxx Hose Connection Axor Steel, 16 884 xxx Hose Connection with check valve, Axor Montreux 27 451 xxx Hose Connection with check valve, Axor Starck 27 456 xxx Hose Connection with check valve, Hansgrohe S27 458 xxx Hose Connection with check valve & Hansgrohe 35 888 xxx Hose Connection with check valve Axor Steel

Marking: MM on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1011302

Print this entry

Brass bodied angled flow control valve incorporating a quarter turn ceramic disc headwork and brass dome or lever operating members (chromium plated). Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: ½" BSP (M) x ¾" BSP (M)

Model: 10 882 xxx Fixfit Stop shut-off valve Axor Starck, 16 882 xxx Fixfit Stop Shut-off valve Axor Montreux,17 882 xxx Fixfit Stop Shut-off valve Axor Carlton (lever handle), 17 883 xxx Fixfit Stop Shut-off valve Axor Carlton (cross handle), 27 452 xxx Fixfit Stop Shut-off valve Hansgrohe, 35 882 xxx Fixfit Stop Shut-off valve Axor Steel, 37 882 xxx Fixfit Stop Shut-off valve AxorTerrano (lever handle), 37 883 xxx Fixfit Stop Shut-off valve Axor Terrano (cross handle), 38 882 xxx Fixfit Stop Shut-off valve Axor Uno, 39 882 xxx Fixfit Stop Shut-off valve Axor Citterio (lever handle) & 39 883 xxx Fixfit Stop Shut-off valve Axor Citterio (cross handle)

Marking: Cover plate etched Hansgrohe.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer:  

Factor: Hansgrohe AG

WRAS Approval Number  0912036

Print this entry

`Pharo` steam shower module (aluminium) consisting of an overheat surge shower, shower handset (chromium plated plastic) and body sprays incorporating check valve cartridges (Neoperl) (not tested for backflow prevention in this assembly). Temperature is controlled via a thermostatic cartridge with dome type operating member that incorporates a temperature limiting button with manual override facility (chromium plated brass). Flow is controlled via a ceramic cartridge with single lever operating member (chromium plated brass). Both inlets incorporate screwdriver operated isolation valve, single check valve cartridge (Neoperl) not tested for Backflow Protection in this assembly and stainless steel strainers. This unit also incorporates a steam generator. Maximum working pressure 10 bar, temperature 60°C.

Size: ½" BSP inlets.

Model: Pharo steam shower module - 29 614 xxx.

Marking: `Pharo` and `Hansgrohe` stamped into operating member. Hansgrohe printed on shower handset.

Installation Requirements : R001 R040 R160       

Note:  

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  0902055

Print this entry

Combined overflow waste bath filler assembly. For use with a suitable separately mounted flow control valve. The bath filler outlet is in the centre of the overflow and so an air gap cannot be maintained.

Size: ¾" BSP.

Model: Hansgrohe Complete Exafill set 58 123 xxx (set consists of the basic set 58 125 180 and the finish sets 58 127 xxx & 58 126 180).

Marking: `Hansgrohe` moulded onto inside of filler cover.`Hansgrohe Axor/Phard` and model number printed onto adhesive label.

Installation Requirements : R001 R160         

Note:  

Proviso: For use only where level of risk is no greater than Fluid Category 3.

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1107093

Print this entry

Six hole, single bath outlet, hand shower outlet and an overhead shower outlet (chromium plated brass) incorporating quarter turn ceramic disc headworks controlling the flow, and single lever operating members. The temperature is controlled independently via a thermostatic cartridge and cross top operating member. Both inlets incorporate a single check valve cartridge (suitable for backflow prevention against fluid category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Size: 15mm compression inlets.

Model: BL8819 – Archipelago 8800 series.

Marking: Lefroy Brooks and made in England on body of TMV.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Lefroy Brooks Midland Ltd

Factor:  

WRAS Approval Number  1012061

Print this entry

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass) activated via infra red sensors. The spout outlets incorporate plastic aerators. Supplied with stainless steel strainer. Minimum/maximum working pressures 0.5 bar/8.0 bar respectively. Cold water use only.

Size: Stainless steel braided SPX lined hose assembly with 3/8” BSP captive nut end connectors.

Model: L991, L996 (battery operated). L992, L997 (mains operated).

Marking: Lovair and company logo on body.

Installation Requirements : R001 R006         

Note: Cold water use only.

Proviso:  

Manufacturer:  

Factor: Lovair Limited

WRAS Approval Number  1006009

Print this entry

`Viso 885V` deck mounted electronically controlled tap (chromium plated brass) activated via an infra red sensor. Supplied with a plastic flow straightener, plastic aerator and a stainless steel strainer. Maximum working pressure 6.0 bar.

Size: Stainless steel braided EPDM lined hose assembly with ½" BSP female captive nut.

Model: Viso 885V electronic tap.

Marking: Performa etched into body.PCA, Spray 5.0L & Neoperl Care 8.0L etched into outlet.

Installation Requirements : R001 R006         

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

Factor:  

WRAS Approval Number  1102301

Print this entry

Range of wall mounted concealed control assemblies incorporating a solenoid to control the flow. Maximum working pressure 10.0 bar and maximum operating temperature 80°C.

Size: ½” BSP (M) Inlets

Model: TN78-9 V465 (with Neoperl Flow Control 3 l/min)TN78-9 V565 (Same structure like TN78-9 V465, just with Neoperl Flow Control 4 l/min)TN78-9 V765 (Same structure like TN78-9 V465, just with Neoperl Flow Control 2 l/min)

Marking: TOTO on control box

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: TOTO Japan Ltd

Factor: TOTO Europe GmbH

WRAS Approval Number  1102304

Print this entry

Range of deck mounted spouts (chromium plated brass) with an infra red sensor built into the body. Maximum operating temperature 60°C.

Size: 7.5 mm flexible hose

Model: TEN12AW V505 TEN12AW V105 TEN12AW V205TEN12AW V305 TEN40AW V105 TEN40AW V205

Marking: TOTO on body

Installation Requirements : R001 R006         

Note:  

Proviso:  Inlet connection hose to be installed where light is excluded.

Manufacturer: TOTO Japan Ltd

Factor: TOTO Europe GmbH

WRAS Approval Number  1107035

Print this entry

Concealed valve assembly (cast brass) incorporating quarter turn ceramic disc headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Size: ½” BSP female inlets.

Model: 900.

Marking: Vola on body.Vola KK on headwork. Vola material: EPDM on rubber cover.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Vola A/S

Factor:  

WRAS Approval Number  0806700

Print this entry

Non-freeze water point for through wall mounting with wall box facility, with a cast gunmetal body with a brass rising spindle headworks and incorporating a solid plait packing ring (PTFE) and a (PTFE) seating washer. Supplied with closing key manufactured of brass.

Size: ¾" BSP inlet, 20mm spigot outlet.

Model: YA101, YA201, YA202 and YA203.

Marking: Wade and direction of flow arrow printed on adhesive label on body. Product infomation cast onto body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Wade International Ltd

Factor:  

WRAS Approval Number  1102027

Print this entry

Range of `Clease` wall mounted bar showers (chromium plated brass) with a ceramic cartridge controlling and diverting the flow from overhead shower to shower handset outlet, with single lever operating member. Supplied with hose, slider and slider rail. Maximum working pressure 8.0 bar & maximum operating pressure 65°C.

Size: ½” BSP male inlets.

Model: Clease bar showers C00010 and C00060.

Marking: Clease and WRAS on body.

Installation Requirements : R001 R040         

Note: Not supplied with shower heads.

Proviso:  

Manufacturer: Xiamen Clease Industries Co. Ltd

Factor:  

WRAS Approval Number  1012006

Print this entry

`Extreme` range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass) activated via infra red sensors The spout outlets incorporate plastic aerators. Supplied with stainless steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Size: Stainless steel braided SPX lined hose assembly with 3/8” BSP captive nut end connectors.

Model: Extreme B, Extreme Plus B (battery operated).Extreme E, Extreme Plus E (mains operated).

Marking: Stern on body.

Installation Requirements : R001 R006         

Note: Cold water use only.

Proviso:  

Manufacturer: Y. Stern Engineering (1989) Ltd

Factor: