Section 1140

Print Entire Section

Fittings for use with Tube and Pipe

Compression, metal, for use with copper tube

WRAS Approval Number  1210099

Print this entry

Range of compression fittings with brass bodies for use with copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Size: 8mm - 28mm

Model: COCO, COCORED, COCOFI, COCOMI, COEL, COELFI, COELMI, COTE, COTERED, COTEFI, COELWP, COTC, COEC, COSTC, COBTC, CORS1 & CORS3.

Marking: CUB, size & EN1254-2 on compression nut.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Cubralco Ltd.

WRAS Approval Number  1205401

Print this entry

Range of brass compression fittings for use with copper tube. Maximum working pressure 16.0 bar. For cold water use only.

Size: 8mm to 28mm

Model: Center Brand Non-manipulative Type 'A' range of compression fittings (Duplex Alpha brass or DZR brass)

Marking: 'CB', EN1254-2 and size on compression nut 'CB' and size on compression nut (8mm version only)

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Wolseley UK

WRAS Approval Number  1205364

Print this entry

Range of Flowflex Type `A` non-manipulative range of compression fittings (Duplex Alpha brass or DZR brass) for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Size: 8mm to 54mm

Model: Flowflex Type 'A' model where XX denotes size code: P901XX straight couplings P901DOXX straight couplings with MT cock P903SFXX swivel couplings P901RPXX repair couplings P902TXX, P902BXX, P902XX, P903XX & P903STXX straight adaptors P921XX tank connector P801XX, P802XX, P802TXX, P801DOXX, P8035FXX, P802DOXX, P821XX, P803XX & P803WPXX elbows P923 stop ends P701XX, P702XX, P703XX, P737XXM, P704XX, P705XX, P717XX, P717WPXX, P706XX & P727XX Tees

Marking: Flowflex, UK made, EN1254-2 and size on compression nut Flowflex logo and size on compression nut (8mm version only)

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Flowflex Components Ltd

Factor:  

WRAS Approval Number  1205368

Print this entry

Range of brass compression fittings for use with copper tube. Maximum working pressure 12.0 bar. Maximum operating temperature 99°C.

Size: 15mm, 22mm and 28mm

Model: Irish Instantor range.

Marking: Instantor, size and EN1254-2 on nut.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Sanbra Fyffe Ltd.

Factor:  

WRAS Approval Number  1109392

Print this entry

Range of brass compression fittings for use with copper tube. Maximum working pressure 16.0 bar & maximum operating temperature 99°C.

Size: 22mm, 28mm, 35mm & 42mm.

Model: PC200 Series

Marking: M on body or Nut

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Edison Brasswork Inc

Factor: Mueller Primaflow Ltd

WRAS Approval Number  1301337

Print this entry

Range of brass compression fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Size: 15mm - 28mm

Model: OP 901.05, OP 901.08, OP 901.09, OP 902.15, OP 902.21, OP 902.22, OP 902.23, OP 903.12, OP 903.18, OP 903.19, OP 801.05, OP 801.08, OP 801.09, OP 803.WP.2, OP 701.05, OP 701.08, OP 701.09, OP 702.16, OP 923.4, OP 923.5

Marking: Opal, size and EN1254-2 on nut

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Flowflex Components Ltd

WRAS Approval Number  1205403

Print this entry

`Opal` range of brass compression fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Size: 15mm to 28mm

Model: Opal Type 'A' Non-manipulative range of compression fittings (Duplex Alpha brass or DZR brass)

Marking: Opal, EN1254-2 and size on compression nut. KIWA on fitting body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Flowflex Components Ltd

Factor:  

WRAS Approval Number  1205402

Print this entry

`Lamontite` range of brass compression fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Size: 10mm to 28mm

Model: Lamontite Type 'A' Non-manipulative range of compression fittings (Duplex Alpha brass or DZR brass)

Marking: Lamontitte, UK, EN1254-2 and size on compression nut. CR on fitting body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Flowflex Components Ltd

Factor:  

WRAS Approval Number  0910316

Print this entry

T - piece (DZR brass body) incorporating a single check valve assembly (suitable for backflow prevention against Fluid Category 2). Maximum working pressure 10.0 bar.

Size: 22 mm compression x 22 mm compression x ¾" BSP (M).

Model: AI 903A2201 DZR Tee Piece.

Marking: Manufacturer's logo, DZR mark and direction of flow arrow on body.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Airaga Rubinetterie Spa

Factor: Altecnic Ltd.

WRAS Approval Number  1105341

Print this entry

Range of brass compression fittings for use with copper tube. Maximum working pressure 16.0 bar.

Size: 15mm, 16mm, 18mm, 22mm & 28mm.

Model: RB0250 RB0252, RB0253 RB0260 RB0261 RB0262 RB0263 RB0270 RB0270R RB0271 RB0280 RB0281 RB0282 RB0283 RB0284

Marking: Manufacturers logo on body

Installation Requirements : R001 R110         

Note:  

Proviso:  

Manufacturer: Pietro Ravani SpA

Factor:  

WRAS Approval Number  1210055

Print this entry

Range of compression fittings with brass bodies for use with copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Size: 8mm - 28mm

Model: Honson Range: HS100-001, HS100-002, HS100-003, HS100-004, HS100-005, HS100-006, HS100-007, HS100-008, HS100-009, HS100-010, HS100-011, HS100-012, HS100-013, HS100-014, HS100-015, HS100-016, HS100-017 & HS100-018.

Marking: Wenling Honson logo, size and product info on compression nut.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Wenling Honson Brassware Co Ltd

Factor:  

WRAS Approval Number  0812052

Print this entry

`Kufit` range of Type B manipulative conversion adaptors with DZR brass compression nut, compression ring and adaptor cone. Manufactured in accordance with BS864 : Part 2 : 1983/EN11254 Part 2. The fittings are for use with half hard and annealed table Y copper tube to BS2871 : Part 1 : EN1057 and DZR brass compression joints. For above and below ground use. Maximum working pressure 16.0 bar.

Size: 15mm, 22mm, 28mm & 42mm

Model: `Kufit` cat No. 1870.

Marking: `Kuterlite`, 1800, 8641 and CR mark cast into compression nut

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Yorkshire Fittings Ltd

Factor:  

WRAS Approval Number  0809022

Print this entry

Range of brass fittings for use with copper tube. Maximum working pressure 10.0 bar.

Size:  

Model: DA-QT23 - ½" captive nut x ½" BSP male. DA-QT21 - ½" BSP male x 15mm compression. DA-QT21 - ¾" BSP male x 18mm compression.

Marking: `DA` printed onto fitting.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Zhejiang DunAn Valve Co Ltd

Factor:  

WRAS Approval Number  1012356

Print this entry

Range of DZR brass compression fittings for use with copper tube. Maximum working pressure 12.50 bar. Cold water use only.

Size: 8mm , 10mm, 15mm,22mm, 28mm

Model: DZR Range of Edison Compression Fittings Coupler C x M Tee C x C x F Stop End Swivel Elbow C x F Wall plate elbow C x F

Marking: Manufacturer's logo on body.

Installation Requirements : R001 R110         

Note:  

Proviso:  

Manufacturer: Edison Brasswork Inc

Factor: Zhejiang IDC Fluid Control Co Ltd