Section 1150

Print Entire Section

Fittings for use with Tube and Pipe

Compression, metal, for use with copper tube - above ground use only

WRAS Approval Number  1112082

Print this entry

`Kuterlite K600` range of non manipulative brass compression fittings for use with copper pipe. For above ground use only. Maximum working pressure 6mm - 10mm - 66.6 bar. Maximum operating temperature 99°C.

Size: Straight connector: ¾” x 22mm.Heater tee: ½” x ½” x 15mm.Straight coupling: 6mm to 28mm, 8mm x 6mm to 28mm x 22mm.Male coupling: 6mm x 1/8” to 28mm – 1”.Female coupling: 8mm x ¼” to 28mm – 1”.Lead coupling: 15mm & 22mm.Elbow: 6mm to 28mm, 22mm x 15mm.Slow bend: 15mm to 28mm.Male elbow: 12mm x 3/8” to 28mm x 1”.Male elbow: 15mm x ½” to 28mm x 1”, 15mm x ½” to 22mm x ¾”.Female elbow: 12mm x 3/8” to 28mm x 1”.Female wall elbow: 15mm x ½”, 15mm x ¾” & 22mm x ¾”.Tee: 6mm to 28mm.Tee reduced branch: 15mm x 15mm x 12mm to 28mm x 28mm x 28mm.Tee one end reduced: 22mm x 15mm x 22mm to 28mm x 22mm x 28mm.Tee one end and branch reduced: 15mm x 12mm x 12mm to 28mm x 22mm x 22mm.Tee both ends reduced: 12mm x 12mm x 15mm to 22mm x 22mm x 28mm.Male tee: 15mm x ½” x 15mm & 28mm x 1” x 28mm.Male tee: 15mm x 15mm x ½” & 22mm x 22mm x ¾”.Cross: 15mm x 15mm x 15mm x 15mm, 22mm x 15mm x 15mm x 15mm & 22mm x 22mm x 15mm x 15mm.Female tee: 15mm x 15mm x 3/8” to 28mm x 28mm x 1”.Female tee: 15mm x 3/8” x 15mm to 28mm x ½” x 28mm.Female tee with back plate: 15mm x 15mm x 15mm to 22mm x 22mm x 22mm.Male adaptor: 15mm x ½”, 22mm x ¾” & 28mm x 1”.Female adaptor: 15mm x ½” to 28mm x 1”.Reducing set: 8mm x 6mm to 28mm x 28mm.Stop end: 6mm to 28mm, 22mm x 1/8”.Obtuse bend: 15mm.Sweep: 15mm & 22mm.Comer tee: 15mm x 15mm x 15m & 22mm x 22mm x 15mm.Shank adaptor: 15mm x ½”.Blanking plug: 15mm to 28mm.

Model: Kuterlite K600.

Marking: Kuterlite, size and product information on body of fitting.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

Factor:  

WRAS Approval Number  1201087

Print this entry

Range of brass compression fittings (couplings, elbows, tees, stop ends, wall plate elbows & swivel couplers) available in Chinese brass, DZR brass and chrome plated brass, for use with copper pipe. Above ground use only Maximum working pressure 16.0 bar. Cold water use only.

Size: Chinese & DZR brass - 8mm - 54mm. Chrome plated brass - 15mm & 22mm.

Model: TPK range.

Marking: Chinese & chrome plated brass: TPK, size & WRAS on compression nut. DZR brass: CR, TPK, size & WRAS on compression nut.

Installation Requirements : R001           

Note: This approval does not include tank connectors, drain cocks, end feed elbows or valves.

Proviso:  

Manufacturer:  

Factor: Wickes Building Supplies Ltd.

WRAS Approval Number  1201086

Print this entry

Range of brass compression fittings (couplings, elbows, tees, stop ends, wall plate elbows & swivel couplers) available in Chinese brass, DZR brass and chrome plated brass, for use with copper pipe. Above ground use only Maximum working pressure 16.0 bar. Cold water use only.

Size: Chinese & DZR brass - 8mm - 54mm. Chrome plated brass - 15mm & 22mm.

Model: TPK range.

Marking: Chinese & chrome plated brass: TPK, size & WRAS on compression nut. DZR brass: CR, TPK, size & WRAS on compression nut.

Installation Requirements : R001           

Note: This approval does not include tank connectors, drain cocks, end feed elbows or valves.

Proviso:  

Manufacturer:  

Factor: Plumbing Trade Supplies (PTS)

WRAS Approval Number  1201088

Print this entry

Range of brass compression fittings (couplings, elbows, tees, stop ends, wall plate elbows & swivel couplers) available in Chinese brass, DZR brass and chrome plated brass, for use with copper pipe. Above ground use only Maximum working pressure 16.0 bar. Cold water use only.

Size: Chinese & DZR brass - 8mm - 54mm. Chrome plated brass - 15mm & 22mm.

Model: TPK range.

Marking: Chinese & chrome plated brass: TPK, size & WRAS on compression nut. DZR brass: CR, TPK, size & WRAS on compression nut.

Installation Requirements : R001           

Note: This approval does not include tank connectors, drain cocks, end feed elbows or valves.

Proviso:  

Manufacturer:  

Factor: Homebase

WRAS Approval Number  1201085

Print this entry

Range of brass compression fittings (couplings, elbows, tees, stop ends, wall plate elbows & swivel couplers) available in Chinese brass, DZR brass and chrome plated brass, for use with copper pipe. Above ground use only Maximum working pressure 16.0 bar. Cold water use only.

Size: Chinese & DZR brass - 8mm - 54mm. Chrome plated brass - 15mm & 22mm.

Model: TPK range.

Marking: Chinese & chrome plated brass: TPK, size & WRAS on compression nut. DZR brass: CR, TPK, size & WRAS on compression nut.

Installation Requirements : R001           

Note: This approval does not include tank connectors, drain cocks, end feed elbows or valves.

Proviso:  

Manufacturer:  

Factor: BSS Group Ltd.

WRAS Approval Number  1209044

Print this entry

Range of brass compression fittings for use with copper tube, above ground only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Size: 12mm - 35mm.

Model: Conex range

Marking: Conex, Sanbra, fitting size on nut.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Taizhou Devoda Valve Co. Ltd.

Factor: Conex Universal Ltd

WRAS Approval Number  1112050

Print this entry

Range of compression end connectors with DZR brass bodies and EPDM `O` rings. For use with `Pegler Yorkshire` approved products to adapt from female iron ends to compression fittings. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C. Maximum working pressure 6.0 bar. Maximum operating temperature 99°C

Size: 15mm, 22mm, 28mm, 35mm, 42mm & 54m.

Model: Kuterlite Pro.

Marking: Kuterlite, 1254-2 & size on compression nuts.

Installation Requirements : R001           

Note: Only applies to factory fitted adaptors.

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

Factor:  

WRAS Approval Number  1201052

Print this entry

Range of brass compression fittings for use with copper pipe. Above ground use only. Maximum working pressure 16.0 bar. Cold water use only.

Size: 211 Range - 8mm - 54mm. 212 Range - 8mm - 54mm. 213 Range - 15mm & 22mm.

Model: 211 Range (Chinese Brass). 212 Range (DZR Brass). 213 Range (Chrome plated Chinese Brass).

Marking: 211 Range: Size, WRAS on compression nut. D on body. 212 Range: Size, WRAS and D on compression nut. CR & D on body. 213 Range: Size, WRAS and D on compression nut. D on body.

Installation Requirements : R001           

Note: D denotes the marking placement for secondary approvals.

Proviso:  

Manufacturer: Zhejiang IDC Fluid Control Co Ltd

Factor:  

WRAS Approval Number  1201084

Print this entry

Range of brass compression fittings (couplings, elbows, tees, stop ends, wall plate elbows & swivel couplers) available in Chinese brass, DZR brass and chrome plated brass, for use with copper pipe. Above ground use only Maximum working pressure 16.0 bar. Cold water use only.

Size: Chinese & DZR brass - 8mm - 54mm. Chrome plated brass - 15mm & 22mm.

Model: TPK range.

Marking: Chinese & chrome plated brass: TPK, size & WRAS on compression nut. DZR brass: CR, TPK, size & WRAS on compression nut.

Installation Requirements : R001           

Note: This approval does not include tank connectors, drain cocks, end feed elbows or valves.

Proviso:  

Manufacturer:  

Factor: Keyline

WRAS Approval Number  1201083

Print this entry

Range of brass compression fittings (couplings, elbows, tees, stop ends, wall plate elbows & swivel couplers) available in Chinese brass, DZR brass and chrome plated brass, for use with copper pipe. Above ground use only Maximum working pressure 16.0 bar. Cold water use only.

Size: Chinese & DZR brass - 8mm - 54mm. Chrome plated brass - 15mm & 22mm.

Model: TPK range.

Marking: Chinese & chrome plated brass: TPK, size & WRAS on compression nut. DZR brass: CR, TPK, size & WRAS on compression nut.

Installation Requirements : R001           

Note: This approval does not include tank connectors, drain cocks, end feed elbows or valves.

Proviso:  

Manufacturer:  

Factor: City Plumbing Supplies

WRAS Approval Number  1201082

Print this entry

Range of brass compression fittings (couplings, elbows, tees, stop ends, wall plate elbows & swivel couplers) available in Chinese brass, DZR brass and chrome plated brass, for use with copper pipe. Above ground use only Maximum working pressure 16.0 bar. Cold water use only.

Size: Chinese & DZR brass - 8mm - 54mm. Chrome plated brass - 15mm & 22mm.

Model: TPK range.

Marking: Chinese & chrome plated brass: TPK, size & WRAS on compression nut. DZR brass: CR, TPK, size & WRAS on compression nut.

Installation Requirements : R001           

Note: This approval does not include tank connectors, drain cocks, end feed elbows or valves.

Proviso:  

Manufacturer:  

Factor: Connections

WRAS Approval Number  1201081

Print this entry

Range of brass compression fittings (couplings, elbows, tees, stop ends, wall plate elbows & swivel couplers) available in Chinese brass, DZR brass and chrome plated brass, for use with copper pipe. Above ground use only Maximum working pressure 16.0 bar. Cold water use only.

Size: Chinese & DZR brass - 8mm - 54mm. Chrome plated brass - 15mm & 22mm.

Model: TPK range.

Marking: Chinese & chrome plated brass: TPK, size & WRAS on compression nut. DZR brass: CR, TPK, size & WRAS on compression nut.

Installation Requirements : R001           

Note: This approval does not include tank connectors, drain cocks, end feed elbows or valves.

Proviso:  

Manufacturer:  

Factor: Travis Perkins Group Plc.

WRAS Approval Number  1011013

Print this entry

Range of brass, DZR brass and chrome plated brass either threaded or compression fittings for use with copper tube. Above ground use only. Maximum working pressure 16.0 bar at 30°C.

Size: 8mm - 54mm & ¼" - 2".

Model: Brass: CB10, CB11, CB12, CB12T, CB12F, CB12LF, CB14, CB14F, CB16, CB17, CB17P, CB17V, CB18, CB20, CB21, CB22, CB24, CB26, CB29, CB29H, CB30, CB31, CB32, CB34, CB40, CB90, CB91, CB 91SP, CB93, CB93D, CB97 & CB98. Chrome Plated: CBX10, CBX11, CBX12, CBX14, CBX16, CBX17, CBX18, CBX20, CBX21, CBX22, CBX24, CBX26, CBX29, CBX30, CBX31, CBX34, CBX40, CBX90, CBX91 & CBX91S. DZR Brass: CD10, CD11, CD12, CD14, CD16, CD17, CD18, CD20, CD22, CD24, CD26, CD29, CD30, CD31 & CD91SP.

Marking: Size, Allpex-UK, EN1254-2-3 on compression nut.DZR versions have CR on body.Smaller sizes have ‘AL’ on compression nut.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Allpex Ltd

Factor:  

WRAS Approval Number  1103027

Print this entry

Range of brass and brushed chromium plated brass, BSP or compression fittings for use with copper tube. Above ground use only. Maximum working pressure: 25 bar (8mm - 15mm) & 16 bar (16mm-28mm). Maximum operating temperature 95°C.

Size: 8mm – 28mm & ¼” – 1”.

Model: Stop end (15mm, 22mm & 28mm), Straight coupling (15mm, 22mm & 28mm), Straight coupling (15mm x ½” male & 15mm x ½” female), Elbow (22mm & 28mm), Equal Tee (22mm & 28mm), Stop end (8mm, 10mm, 12mm, 15mm, 22mm & 28mm) Blanking nut (15mm & 22mm), Straight coupling (8mm, 10mm, 12mm, 15mm, 22mm & 28mm), Straight coupling (8mm x ¼” male, 10mm x ¼” male, 10mm x 3/8” male, 15mm x ½” male, 15mm x ¾” male, 22mm x ¾” male, 22mm x 1” male & 28mm x 1” male), Straight reducer (15mm x ½” female & 15mm x ¾” female), Straight reducer (22mm x ½” male), Straight reducer (22mm x ¾” Female, 22mm x 1” Female & 28mm x 1” Female), Tank Connector (15mm x ½” male & 22mm x ¾” male), Straight reducer (10mm x 8mm, 12mm x 8mm, 12mm x 10mm, 15mm x 8mm, 15mm x 10mm, 15mm x 12mm, 22mm x 15mm & 28mm x 22mm), Reducer (15mm x 8mm, 15mm x 10mm, 15mm x 12mm & 22mm x 15mm), Repair (15mm x 100mm), Elbow (8mm x 8mm, 10mm x 10mm, 12mm x 12mm, 15mm x 15mm, 22mm x 22mm, 22mm x 22mm & 28mm x 28mm), Elbow (15mm x ½” male, 22mm x ¾” male & 22mm x 1” male), Female Elbow (15mm x ½”, 22mm x ¾” & 28mm x ¾”), Equal Tee (8mm, 10mm, 12mm, 15mm, 22mm & 28mm), Reduced Tee (15mm x 15mm x 10mm, 15mm x 15mm x 22mm, 22mm x 15mm x 15mm, 22mm x 15mm x 22mm, 22mm x 22mm x 15mm & 28mm x 28mm x 22mm), Reduced Tee (22mm x 22mm x ½” Female), Straight tap connector (15mm x ¾” Female & 22mm x ¾” Female), Elbow tap connector (15mm x ½” Female) & Wall Plate Elbow (15mm x ½” Female).

Marking: Size and `1254` on compression nut. K on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Zheijang Pleast Sanitary Ware Co Ltd

Factor: Hangzhou Doz Import & Export Co Ltd

WRAS Approval Number  1003055

Print this entry

`IBP` range of non-manipulative compression fittings with brass, DZR brass or chromium plated brass bodies for use with copper pipe. For above ground use only, maximum working pressure 16.0 bar.

Size:  8mm,10mm,12mm,15mm,22mm,28mm,35mm,42mm,54mm ¼”, 3/8”, ½”, 3/4”, 1”, 1¼”, 1½”, 2”.

Model: ‘IBP’ Contract Range

Marking: Size, 1254, cast into compression nut.`O` cast into body. CR stamped into body of DZR components only.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: IDC Manufacturing Group (Beijing Office)

Factor: Conex Universal Ltd

WRAS Approval Number  1111047

Print this entry

Series1100 range of brass compression fittings, for use with copper pipe and above ground use only.Maximum working pressure 30.0 bar. Maximum operating temperature 99°C

Size: 10mm - 28mm.

Model: Series 1100.

Marking: Tiemme and size or TM and size on compression nut. Manufacturer's logo on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Tiemme Raccorderie Spa

Factor: