Section 1160

Print Entire Section

Fittings for use with Tube and Pipe

Compression, plastic, for use with plastic tube

WRAS Approval Number  1206069

Print this entry

Range of compression fittings with PPR (polypropylene random copolymer) bodies and nuts with NBR `O` rings and male threaded BSP connections for use with PE 80 and PE 100. Above and below ground use and Cold water use only. Maximum working pressure 16.0 bar.

Size: 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm and 110mm.

Model: Connecto plus.

Marking: Size, Irritec on nuts.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Irritec S.p.A

Factor:  

WRAS Approval Number  1205051

Print this entry

Range of spigot reducers and end caps with polyethylene bodies for use with Polyfast compression fittings. Maximum working pressure 16.0 bar. Cold water use only.

Size: 20mm, 25mm, 32mm, 40mm, 50mm & 63mm.

Model: 3085020 – 50mm x 20mm3085025 – 50mm x 25mm3085032 – 50mm x 32mm3085040 – 50mm x 40mm3086320 – 63mm x 20mm3086325 – 63mm x 25mm3086332 – 63mm x 32mm3086340 – 63mm x 40mm3086350 – 63mm x 50mm30920 – 20mm30925 – 25mm30932 – 32mm30940 – 40mm30950 – 50mm30963 – 63mm

Marking: Polypipe logo, size, PN rating on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Polypipe Building Products Ltd

Factor:  

WRAS Approval Number  1205050

Print this entry

Range of compression fittings with polypropylene bodies and EPDM `O` rings for use with polyethylene pipe to BS EN 12201-2. For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Size: 20mm, 25mm, 32mm, 40mm.

Model: 40640 - 40mm x 32mm 40940 - 40mm 42140 - 40mm x 1¼” BSP 42240 - 40mm x 1¼” BSP 40120 - 20mm 40125 - 25mm 40132 - 32mm 40140 - 40mm 40220 - 20mm 40225 - 25mm 40232 - 32mm 40240 - 40mm 40340 - 40mm x 1¼” BSP 40440 - 40mm x 1¼” BSP 40020 - 20mm 40025 - 25mm 40032 - 32mm 40040 - 40mm 40020S - 20mm 40025S - 25mm 40032S - 32mm 40040S - 40mm 48320 - 20mm x ½” BSP 4832512 - 25mm x ½” BSP 48325 - 32mm x ¾” BSP

Marking: Polypipe logo, size, PN rating on compression nuts.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Polypipe Building Products Ltd

Factor:  

WRAS Approval Number  1205049

Print this entry

Range of compression fittings with acetal bodies and EPDM `O` rings for use with polyethylene pipe to BS EN 12201-2. For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Size: 20mm, 25mm, 32mm, 40mm, 50mm and 63mm.

Model: 40625 - 25mm x 20mm 40632 - 32mm x 25mm 4063220 - 32mm x 20mm 40920 - 20mm 40925 - 25mm 40932 - 32mm 40950 - 50mm 40963 - 63mm 41125 - 25mm x 20mm 41132 - 32mm x 25mm 4113220 32mm x 20mm 42120 - 20mm x ½” BSP 42125 - 25mm x ¾”BSP 42132 - 32mm x 1” BSP 42150 - 50mm x 1½” BSP 42163 - 63mm x 2” BSP 42220 - 20mm x ½” BSP 42225 - 25mm x ¾” BSP 42232 - 32mm x 1” BSP 42250 - 50mm x 1 ½” BSP 42263 - 63mm x 2” BSP 42320 - 20mm x ½” BSP 42325 - 25mm x ¾” BSP 42420 - 20mm x ½” BSP 42425 - 25mm x ¾” BSP 40050 - 50mm 40050S - 50mm 40063 - 63mm 40063S - 63mm 4012520 - 25mm x 20mm 40150 - 50mm 40163 - 63mm 40250 - 50mm 40263 - 63mm 40320 - 20mm x ½” BSP 40325 - 25mm x ¾” BSP 4032512 - 25mm x ½” BSP 40332 - 32mm x 1” BSP 40350 - 50mm x 1½” BSP 40363 - 63mm x 2” BSP 40420 - 20mm x ½” BSP 40425 - 25mm x ¾” BSP 4042512 - 25mm x ½” BSP 40432 - 32mm x 1” BSP 40440 - 40mm x 1¼” BSP 40450 - 50mm x 1½” BSP 40463 - 63mm x 2” BSP 47450 - 50mm 47463 - 63mm 48120 - 20mm x ½” metric 48125 - 25mm x ¾” metric 4812512 - 25mm x ½” metric 4901 - 1” Imperial 49012 - ½” Imperial 49034 - ¾” Imperial 42425 - 25mm x ¾” BSP 46420 - 20mm 46425 - 25mm 46432 - 32mm 46440 - 40mm 46450 - 50mm 46463 - 63mm 47820 - 20mm x 15mm 4782515 - 25mm x 15mm 47825 - 25mm x 22mm 4783222 - 32mm x 22mm 47832 - 32mm x 28mm 41320 - 20mm x ½” BSP 41325 - 25mm x ½” BSP 4132534 - 25mm x ¾” BSP 47620 - 20mm 47625 - 25mm 47632 - 32mm 4802520 - 25mm x 20mm 4803220 - 32mm x 20mm 4803225 - 32mm x 25mm 4805020 - 50mm x 20mm 4805025 - 50mm x 25mm 4805032 - 50mm x 32mm 4806320 - 63mm x 20mm 4806325 - 63mm x 25mm 4806332 - 63mm x 32mm 4806350 - 63mm x 50mm 4712520 - 25mm x 20mm 4713220 - 32mm x 20mm 4713225 - 32mm x 25mm 4715020 - 50mm x 20mm 4715025 - 50mm x 25mm 4715032 - 50mm x 32mm 4716320 - 63mm x 20mm 4716325 - 63mm x 25mm 4716332 - 63mm x 32mm 4716350 - 63mm x 50mm

Marking: Polypipe logo, size, PN rating on compression nuts.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Polypipe Building Products Ltd

Factor:  

WRAS Approval Number  1205367

Print this entry

Plas4 Universal range of plastic compression fittings with polypropylene bodies incorporating nitrile `O` rings. The fittings are approved for connecting metric polyethylene pipe (manufactured in accordance with BS6572 and 6730) to imperial polyethylene pipe (manufactured in accordance with BS1972 & BS3284) copper pipe, galvanised steel pipe and lead pipe fittings are for above and below ground use. Maximum working pressure 16.0 bar, cold water use only.

Size: 20mm, 25mm and 32mm Polyethylene pipe ½”, ¾” and 1” Imperial Polyethylene pipe. 15mm, 22mm and 28 mm copper ½”, ¾” and 1” Galvanised pipe ½”, ¾” and 1” Lead pipe

Model: Plass4 Universal Fittings77017 Range 15-22mm x 25mm77017 Range 20-27mm x 25mm77017 Range 27-35mm x 25mm77057 Range 15-35mm x 25mm77057 Range 20-27mm x 25mm77057 Range 27-35mm x 25mm

Marking: Plasson & size on coupling.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Plasson Ltd

Factor: Plasson UK Ltd

WRAS Approval Number  1205366

Print this entry

Range of plastic compression fittings with polypropylene bodies incorporating nitrile `O` rings. The fittings are approved for connecting metric polyethylene pipe manufactured in accordance with BS6572 and 6730. Fittings are for above and below ground use. Maximum working pressure 16.0 bar, cold water use only.

Size: 20mm , 25mm, 32mm, 50mm and 63mm

Model: 7010 (coupling), 7020 (male adaptor), 7030 (female adaptor), 7040 90 (degree tee), 7045 90 (degree slip tee), 7050 90 (degree elbow), 7060 (female adaptor parallel thread), 7110 (reducing coupling), 7120 (end cap), 7140 90 (degree tee BSP threaded offtake), 7150 90 (degree elbow BSP threaded female offtake), 7220 (compression flange adaptor), 7236 (spigot flange adaptor), 7340 90 (degree reducing tee), 7350 90 (degree spigot elbow), 7460 45 (degree elbow), 7610 (repair coupling), 7740 (enlarging tee), 7750 (wall plate elbow), 7810 (coupling with BSP male riser), 7840 90 (degree tee with BSP male offtake), 7850 90 (degree elbow with BSP male offtake), 7940 (modular adaptor), 7250 (threaded adaptor), 7976 (modular tee female BSP offtake) & 7956 (modular tee male BSP offtake).

Marking: Plasson, size and Kiwa on coupling

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Plasson Ltd

Factor: Plasson UK Ltd

WRAS Approval Number  1205365

Print this entry

Range of plastic compression fittings with polypropylene bodies incorporating nitrile `O` rings. The fittings are approved for connecting imperial polyethylene pipe manufactured in accordance with BS1972 & BS3284. Fittings are for above and below ground use. Maximum working pressure 12.0 bar. Cold water use only.

Size: ½”, ¾” and 1”

Model: 7418 Metric to Imperial Slip Coupling, 7478 Metric to Imperial 90 Degree Elbow, 7454 Imperial to Imperial Elbows, 7428 Imperial Adaptor to Male BSP Thread, 7444 Imperial Equal Tees, 7388 Imperial Adaptor to Female BSP Thread, 7144 Imperial Tee with Female BSP branch, 7404 Imperial to Imperial Coupling, 7474 Imperial Elbow with Female BSP offtake and 7494 Imperial Elbow with Male BSP offtake

Marking: Plasson, size and Kiwa on coupling

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Plasson Ltd

Factor: Plasson UK Ltd

WRAS Approval Number  1203065

Print this entry

Range of imperial and metric plastic compression fittings with polypropylene bodies, compression nut and silicone seal for use with PE100 and PE80 pipe. Maximum working pressure 16.0 bar PE 100, 12.0 bar PE80. For above and below ground and cold water use only.

Size: Joiners: 20mm x 20mm – 63mm x 63mm.Reducing Joiners: 25mm x 20mm – 63mm x 50mm.End Connectors: 20mm x ½” BSP M- 63mm x 2”BSP MEnd Connectors: 20mm x ½” BSP F- 63mm x 2” BSP F.Tees: 20mm x 20mm x 20mm – 63mm x 63mm x 63mm.Reducing tees: 25mm x 25mm x 20mm – 63mm x 63mm x 50mmTee: 20mm x 20mm x ½” BSP F - 63mm x 63mm x 2” BSP F.Tee: 25mm x 25mm x ½”BSP M & 25mm x 25mm x ¾” BSP M.Elbow: 20mm x 20mm – 63mm x 63mm.Elbow: 20mm x ½” BSP F- 63mm x 2” BSP F. Elbow: 20mm x ½” BSP M- 32mm x 1” BSP M. End Caps: 20mm-63mm.Wall plate elbows: 20mm x ½” BSP – 25mm x ¾” BSP.Tank Connector: 25mm x ¾”- 32 x 1”.Blanking Plugs: 20mm – 63mmReducing Coupler: 20mm x 25mm – 50mm x 63mm

Model: 3G Metric & Imperial range

Marking: Philmac, size and product information on nut.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Philmac Pty Ltd

Factor:  

WRAS Approval Number  1201061

Print this entry

ERA range of compression fittings with polypropylene bodies and nuts & EPDM `O` rings, for use with PPR (polypropylene random copolymer) pipe. For use above and below ground. Maximum working pressures: DN20 - DN63 = 16.0 bar & DN75 - DN110 = 10.0 bar. Cold water use only.

Size: DN20, DN32, DN63, DN75, DN90, DN110.

Model: ERA.

Marking: ERA, size & PN on bodies.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Yonggao Co Ltd

Factor:  

WRAS Approval Number  1011025

Print this entry

Range of `Plast and Premium Plast` compression fittings with polypropylene bodies, nut and nitrile O-rings for use with polyethylene PE80 and PE100 pipe. For above and below ground use. Maximum working pressure 16.0 bar & cold water use only.

Size: PE80 – 20mm – 32mmPE100 – 20mm – 63mm.

Model: Plast and Premium Plast.

Marking: Plast, size, pressure rating on compression nut.Size on body.

Installation Requirements : R001 .         

Note:  

Proviso:  

Manufacturer: Sociedad De Transformacion De Plasticos SA

Factor: Hydrodif Products Ltd

WRAS Approval Number  1011024

Print this entry

Angle branch tee with HDPE body and nitrile O-rings. The tee also incorporates an `Atlantis` system, 5mm bulkhead connector also made from HDPE and nitrile O-rings for use with HDPE micro duct. For above and below ground use. Maximum working pressure 12.5 bar & cold water use only.

Size: 25mm compression inlet / outlet.

Model: AT 25BR 002 - Atlantis System 45° angle branch tee, AT 5BH 001 - Atlantis 5mm connector & P/C 60204 - 5/2.5 micro duct.

Marking: AT25 BR002 on body of tee.AT5 BH001 on body of bulkhead adaptor.

Installation Requirements : R001 .         

Note:  

Proviso:  

Manufacturer:  

Factor: CMS PLC

WRAS Approval Number  1011319

Print this entry

Range of compression fittings for use with blue MDPE pipes manufactured to BS 6572, with polypropylene bodies and nitrile `O` rings. Maximum working pressure 16.0 bar, cold water use. For use above and below ground.

Size: 20mm-63mm

Model: JASON Compression fittings

Marking: JASON , PN, size, DVGW moulded on compression nut

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Elysee Irrigation Ltd.

Factor: Megagroup Trade Holdings B.V