Section 1305

Print Entire Section

Flushing Mechanisms

WC

Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number  1112003

Print this entry

S9 range of dual flush WC siphons with a polypropylene body and stainless steel link. Cold water use only.

Size: 1½” outlet. Siphon height 7½” – 12”.

Model: S9.

Marking: Dudley Hi-Flo S9B siphon & product information on cap.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Thomas Dudley Ltd

Factor:  

WRAS Approval Number  1203063

Print this entry

‘Ecobeta SNA’ single flush drop valve with ABS body and EPDM washers. Valve operated via a stainless steel chain connected to the cistern handle and incorporates an internal overflow. Cold water use only.

Size: 1½” BSP male outlet.

Model: Ecobeta SNA.

Marking: Ecobeta and product information on float body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: ecoBETA Ltd

Factor:  

WRAS Approval Number  1203062

Print this entry

`CDFV-550` & `CDFV-750` WC dual flush drop valve comprising of an ABS body, silicone seating washer and an internal overflow. Operated via a push button or lever assembly for either full or reduced flush. Cold water use only.

Size: 1½” BSP male outlet.

Model: CDFV-550 cable dual flush valve & CDFV-750 cable dual flush valve.

Marking: Fluidmaster and product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Fluidmaster UK

Factor:  

WRAS Approval Number  1203060

Print this entry

Range of dual flush drop valves with ABS body and silicone seal. The valves are operated either via a push button assembly or cable operated lever/button assembly for either full or reduced flush and incorporate an internal overflow.

Size: 2” outlet.

Model: 920WB-FIF, 920WB-AIC, 920WB-FEF, 920WB-AEF, 920WB-FEP,920WT-AIC, 920WB-FIC, 920WB-AEP & 915WB-AIC.

Marking: Fluidmaster on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Fluidmaster Inc

WRAS Approval Number  1201002

Print this entry

WC dual flush valve. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. For cold water use only.

Size: 1½” and 2” BSP outlet

Model: A2432

Marking: A2432 and WRAS Approved Product logo on top of valve.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Standard International

WRAS Approval Number  1201053

Print this entry

Range WC dual flush outlet valves with ABS bodies and EPDM seals. The valve is operated via a push button assembly for either full or reduced flush, and incorporates an internal overflow. Model A2421 also incorporates an adjustable flush level device. For cold water use only.

Size: 2” BSP male outlets.

Model: A2420 & A2421.

Marking: R&T logo on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.

Factor:  

WRAS Approval Number  1305029

Print this entry

Single flush drop valve with PE, PP and POM body and silicone seal. The valve is operated via a push button assembly and incorporates an internal overflow. Cold water use only.

Size: 2” BSP male outlet

Model: MD2 - non-adjustable with standard button. MD2 telescopique - adjustable with standard button. Telescopique Easyflush - adjustable with easy flush button.

Marking: Wirquin on button casing. Wirquin and NF on valve base.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Wirquin Plastiques

WRAS Approval Number  1201038

Print this entry

WC dual flush drop valve comprising of a plastic body, silicone seating washer and internal adjustable overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Size: 1½” & 2” BSP male outlets.

Model: B228 – 2” BSP & B228 – 1½” BSP.

Marking: Product information, B228 and company logo on body.LAB and email address on cap.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: LAB (Xiamen) Sanitary Fittings Inc

Factor:  

WRAS Approval Number  1205034

Print this entry

Dual flush drop valve with ABS body and silicone seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Size: 2” BSP male outlet

Model: A2411

Marking: R&T & WRAS on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.

Factor:  

WRAS Approval Number  1112004

Print this entry

Dudley S1-11 range of WC siphons with a polypropylene body and stainless steel link. Cold water use only.

Size: 1½” outlet. Siphon height 8” – 12"

Model: Dudley S1-11.

Marking: Dudley, Turbo 11 2-part siphon product information on cap.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Thomas Dudley Ltd

Factor:  

WRAS Approval Number  1201048

Print this entry

WC dual flush drop valve with an ABS and POM plastic body and silicone gel seal. Cold water use only.

Size: 2” male BSP outlet.

Model: P2212.

Marking: HUIDA on push buttons.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Tangshan Huida Ceramic Group Co. Ltd

Factor:  

WRAS Approval Number  1112002

Print this entry

Turbo 44R range of dual flush WC siphons with a polypropylene body and stainless steel link. Cold water use only.

Size: 1½” outlet. Siphon height 8” – 12"

Model: Turbo 44R.

Marking: Turbo 44-R 2-Part siphon & product information on cap.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Thomas Dudley Ltd

Factor:  

WRAS Approval Number  1112001

Print this entry

S7 range of dual flush WC siphons with a polypropylene body and stainless steel link. Cold water use only.

Size: 1½” outlet. Siphon height 7½” – 12”.

Model: S7.

Marking: Dudley Cascade, 1-S7B-B siphon & product information on cap.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Thomas Dudley Ltd

Factor:  

WRAS Approval Number  1112329

Print this entry

Range of WC dual flush drop valves with a polypropylene body and silicon seal. The valves are pneumatically operated for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Size: 2” BSP or Pushfit connection

Model: 66.203, 66.345 (38.736), 66.110, 66.416 (42.314), 66.524, 66.558 (38.735), 66.561(42.320), 66.725, 66.395, 66.804, 490.076 & 490.536.The numbers in brackets denote the model number when the valve is supplied as a spare part.

Marking: Grohe on valve body and float

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1303031

Print this entry

WC dual flush valve, with an ABS body and silicone seal. The valve incorporates an internal overflow. The product is supplied with a push button. For cold water use only.

Size: 2” BSP outlet

Model: B4910

Marking: WDI, logo and B4910 on overflow WRAS Approved, LGA, Water mark and UPC on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: WDI (Xiamen) Technology Inc

Factor:  

WRAS Approval Number  1206026

Print this entry

Dual flush drop valve with ABS body and silicone seal. The valve is operated via a push button assembly for either full or reduced flush, and incorporates an internal overflow. Cold water use only.

Size: 2” BSP Outlet.

Model: Optima S.

Marking: Siamp on stirrup.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Siamp

Factor:  

WRAS Approval Number  1210061

Print this entry

Range of either dual flush or single flush drop valves with ABS bodies and EPDM seating washers. The valves incorporate internal overflows and operated via push button assemblies with one button (single flush) or two button (dual flush). Cold water use only.

Size: 2” BSP male outlet.

Model: Type 230 single and dual flush.

Marking: Geberit, WRAS & NF on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Geberit Sales Limited

WRAS Approval Number  1212131

Print this entry

Dual flush WC outlet valve incorporating an ABS body and EPDM seals. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Size: 2” outlet.

Model: A2412

Marking: R&T, A2412 & product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.

Factor:  

WRAS Approval Number  0904339

Print this entry

`Optima 49` WC dual flush valve with plastic body. The valve is operated by a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2” outlet.

Model: OPTIMA 49.

Marking: `Siamp` moulded onto body.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer:  

Factor: Siak Insaat Malzemeleri A.S.

WRAS Approval Number  1212079

Print this entry

Dual flush outlet valve with ABS body and Silicone seal. The valve is operated via a push button assembly for either full or reduced flush, and incorporates an internal overflow. For cold water use only.

Size: 2” BSP outlet

Model: OV20.

Marking: WEIJIA Logo & ABS on body. OV20 & WRAS on overflow.

Installation Requirements : R001           

Note: The flush plate is not included on this approval, valve only.

Proviso:  

Manufacturer: Xiamen Weijia Industry & Trade Co Ltd

Factor:  

WRAS Approval Number  1305026

Print this entry

WC siphon with a polypropylene body and PVC seal. Supplied with a plastic backnut. Cold water use only.

Size: 1½” Male BSP

Model: UP Siphon - UP 80

Marking: Opella on lid. Model number on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Opella Limited

WRAS Approval Number  1305025

Print this entry

WC siphon with a polypropylene body and PVC seal. Supplied with a plastic backnut. Cold water use only.

Size: 1½” compression outlet.

Model: AP75, AP80, AP85, AP90, AP95 & AP100 WC Siphon.

Marking: Opella on lid. Made in England and model number on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Opella Limited

WRAS Approval Number  1109386

Print this entry

WC dual flush drop valve with a polystyrene body and silicone seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. For cold water use only.

Size: 2” BSP.

Model: TRS0021

Marking: Multikwik on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Sanitartechnik Eisenberg GmbH

Factor: Hunter Plastics Ltd

WRAS Approval Number  1205046

Print this entry

Dual flush drop valve with ABS body and silicone seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Size: 2” BSP outlet.

Model: A2703.

Marking: R&T & model number on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.

Factor:  

WRAS Approval Number  1303901

Print this entry

Dual flush, WC outlet valve. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Size: 2” outlet

Model: T0206 Dual flush valve

Marking: Company logo and T0206 on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen Jielin Plumbing Co Ltd

Factor:  

WRAS Approval Number  1212001

Print this entry

Dual flush, WC outlet valve incorporating ABS body and NBR seals. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Size: 2” outlet.

Model: 80.

Marking: Siamp Monaco on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Siamp

Factor:  

WRAS Approval Number  1305027

Print this entry

Dual flush drop valves with PE, PP and POM bodies and silicone seals. The valves are operated via a push button assembly and incorporate an internal overflow. The products are supplied with plastic backnuts. Cold water use only.

Size: 2” BSP male outlet.

Model: MW2 non-adjustable & MW2 Telescopique adjustable.

Marking: Wirquin and NF on valve base.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Wirquin Plastiques

WRAS Approval Number  1301001

Print this entry

`Dudley Niagara` range of pneumatically operated single and dual flush drop valves. The flush assembly of the dual flush valve is adjustable to give different flush volumes. The valves are operated via a remote button connected by a plastic tube and incorporate an internal overflow. For cold water use only.

Size: 2” outlet

Model: Dudley Niagara

Marking: TD on top of valve cap

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Thomas Dudley Ltd

Factor:  

WRAS Approval Number  1209053

Print this entry

Range of electric no touch dual flush valves with ABS valve bodies, acetal valve base and silicon sponge seal. The valve is operated via two infrared sensors for reduced and full flush incorporates an internal overflow. Cold water use only.

Size: 2” BSP male outlet & 1½” BSP male outlet.

Model: WC03 2” Kit, WC03 1½” Kit & WC01 valve only.

Marking: Touch free and DVS, full flush and reduced flush markings and contact details on sensor plate. DVS and serial number on adhesive label on valve.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Dart Valley Systems Ltd

Factor:  

WRAS Approval Number  1209084

Print this entry

Dual flush drop valve incorporating two push buttons that operate either full or reduced flush. Push button rods operate a system of levers which in turn operate the valve. The valve reduced flush assembly is adjustable to give different flush volumes. The valve incorporates an internal overflow. Cold water use only.

Size: 2” Outlet

Model: Dudley Niagara Mechanical Dual Flush Valve

Marking: Niagara, Dudley and TD on top of valve.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Thomas Dudley Ltd

Factor:  

WRAS Approval Number  1209083

Print this entry

Range of WC siphons with polypropylene body and stainless steel link. Cold water use only.

Size: 1½” Outlet. Siphon height 7” - 12”.

Model: Turbo 88R Duo Flush Syphon

Marking: DUDLEY TURBO 88R, 2 - PART SYPHON TD on cap.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Thomas Dudley Ltd

Factor:  

WRAS Approval Number  1207069

Print this entry

WC dual flush valve with ABS body and silicone seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2” BSP male outlet.

Model: A020004.

Marking: MG logo on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Yuyao Meige Sanitary Parts Industrial Co Ltd

Factor:  

WRAS Approval Number  1207061

Print this entry

B60 Range of Flapper valves with ABS body and EPDM seal. The valve is operated via a lever arm and chain assembly and incorporates an internal overflow. Cold water use only.

Size: 2” BSP male outlet & 1½ BSP male outlet.

Model: B602, B604, B605

Marking: Opella on base of tube.Chem England on lid of top float.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Opella Limited

Factor:  

WRAS Approval Number  1206032

Print this entry

Dual flush drop valves with ABS body and silicone seal. The valves are operated via a push button assembly for either full or reduced flush. Siamp 45 incorporates an internal overflow and Siamp 45P has an optional overflow. Cold water use only.

Size: 2” BSP male outlets

Model: Siamp 45 & Siamp 45P

Marking: Siamp on float.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Siamp

Factor:  

WRAS Approval Number  1206049

Print this entry

Single flush drop valve with ABS body and silicone seal. The valve incorporates an internal overflow. Cold water use only.

Size: 2” BSP Outlet

Model: Storm 33A

Marking: Siamp on stirrup.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Siamp

Factor:  

WRAS Approval Number  1201001

Print this entry

Single flush, pneumatically operated drop valve with an ABS body and rubber seating washer. The valve is operated by a separate push button assembly and transparent connecting hose. Cold water use only.

Size: 2” BSP outlet.

Model: Pinto.

Marking: Dudley on adhesive label.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Valsir Spa

Factor: Thomas Dudley Ltd

WRAS Approval Number  1205060

Print this entry

`Freeflo` WC single and dual flush siphon incorporating a polypropylene body and operated by a lever and link mechanism. For cold water use only.

Size: 7½” – 11”

Model: Freeflo

Marking: Freeflo and Armitage Shanks Freeflo on top of siphon.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Armitage Shanks Ltd

Factor: Ideal Standard International

WRAS Approval Number  1302019

Print this entry

“WDI” B1017 flapper valve with ABS body and silicon seal. The valve is operated via a lever arm and chain assembly and incorporates an internal overflow. Cold water use only.

Size: 2” Male BSP

Model: WDI B1017

Marking: WDI ® on flap. WDI B1017 and WRAS approved on overflow.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: WDI (Xiamen) Technology Inc

Factor:  

WRAS Approval Number  0809329

Print this entry

Easy Flush combined WC filling and flushing valve mechanism consists of a servo assisted diaphragm type plastic float operated valve with side or bottom entry that incorporates an in-line strainer. The flushing mechanism is operated by infra-red sensor to give either a single or dual flush by actuating solenoid valves to lift the rubber seal on the flush outlet. The unit is powered by a 6 volts dc supply. Maximum working pressure 6.0 bar.

Size: ½" BSP Inlet connection and either 1½" or 2" outlet valve.

Model: Easy Flush

Marking: Cap nut marked manufacturers name.

Installation Requirements : R001 R150 R280       

Note:  

Proviso:  

Manufacturer: Cistermiser Ltd

Factor:  

WRAS Approval Number  1007026

Print this entry

WC dual flush drop valve with an ABS body and silicon seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2” or 1½” BSP male outlet.

Model: Kayla AFV50100 - 1½” & AFV50200 - 2”.

Marking: Macdee, model number and flush volume indicator moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen Xinnin Sanitaryware Technology

Factor: CME Sanitary Systems Ltd.

WRAS Approval Number  1004054

Print this entry

Range of WC single flush siphons with polypropylene bodies and diaphragm.

Size:  

Model: DSY0538 - Metro 10" convertible siphon 6/7/9 litre. DSY0425 - Metro 9½" convertible siphon 6/7/9 litre. DSY0325 - Metro 9" convertible siphon 6/7/9 litre. DSY0275 - Metro 8½" convertible siphon 6/7/9 litre. DSY0225 - Metro 8" convertible siphon 6/7/9 litre. DSY0125 - Metro 7½" convertible siphon 6/7/9 litre. CF2610XX - Metro 200mm siphon with flush volume control in 55mm height position and 79mm C-link-6 litre. CF2611XX - Metro 200mm siphon with flush volume control in 73mm height position and 89mm C-link-6 litre. CF2612XX - Metro 200mm siphon with flush volume control in 61mm height position and 89mm C-link-6 litre. CF2613XX - Metro 215mm siphon with flush volume control in 73mm height position and 120mm C-link-6 litre. CF2614XX - Metro 215mm siphon with flush volume control in 73mm height position and 105mm C-link-6 litre. CF2615XX Metro 215mm siphon with flush volume control in 55mm height position and 105mm C-link-6 litre. CF2616XX - Metro 215mm siphon with flush volume control in 73mm height position and 89mm C-link-6 litre. CF2617XX - Metro 200mm siphon with flush volume control in 86mm height position and 60mm C-link-6 litre. CF2619XX - Metro 215mm siphon with flush volume control In 71mm height position and 105mm C-link-6 litre. CF2620XX Metro 200mm siphon with flush volume control in 53mm height position and 89mm C-link-6 litre. CF2630XX Metro 200mm siphon with 60mm C-link-6 litre. CF2631XX Metro 200mm siphon with 79mm C-link-6 litre. CF2632XXMetro 200mm siphon with 89mm C-link-6 litre. CF2633XX Metro 215mm siphon with 89mm C-link-6 litre. CF2634XXMetro 215mm siphon with 105mm C-link-6 litre.

Marking: Derwent Macdee, Derwent Macdee logo and made in England moulded onto cap.Size and product information moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: CME Sanitary Systems Ltd.

Factor:  

WRAS Approval Number  1106333

Print this entry

WC dual flush drop valve with an ABS body and silicon seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow

Size: 2” BSP.

Model: C231

Marking: NUCA and C231on valve

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Compas (Xiamen) Plumbing Technology Co Ltd

Factor:  

WRAS Approval Number  1103023

Print this entry

WC dual flush drop valve comprising of an ABS body, silicone seal and SBR seal washer. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Size: 2" BSP male outlet.

Model: C 211.

Marking: NUCA, C 211, company logo and product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Compas (Xiamen) Plumbing Technology Co Ltd

Factor:  

WRAS Approval Number  1105343

Print this entry

Dual flush drop valve with ABS body and SBR seating washer. The valve is operated via a lever assembly for either full or reduced flush and incorporates an internal overflow. The operating assembly is cable operated for installation to the WC cistern lid.

Size: 2 " BSP Outlet

Model: AKW Dual flush flushing mechanism

Marking: Nison NP253 on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen Nison Sanitaryware Inc

Factor: DLP Limited

WRAS Approval Number  0810029

Print this entry

Electronic WC flushing mechanism with either an Asco or Terza solenoid valve controlling the flow which will be powered via a 6 volt battery or 240 volt - 6 volt mains transformer. The valves are operated via either tactile switch, touch sensor, infrared sensor and transe sensor. Flushing mechanism can be adjusted to provide various flush volumes via the control box. Maximum working pressures varies with solenoid valve.

Size: Asco Valves1" BSP inlet/outlet - SCEX210D4E-MWP-6.0 bar.1¼" BSP inlet/outlet - SCEX210D8E-MWP-3.0 bar.Beta Valves1" BSP inlet/outlet - 7306BB-MWP-6.0 bar.1¼" BSP inlet/outlet - 8306ABB-MWP-1.0 bar.

Model: Touch SenseEW21TS (1") 28mm, EW21TS (1¼") 35mm,EW21TS (FE) (1"-28mm), EW21TS (FE) (1¼"-35mm).InfraredEW22IR (1") 28mm, EW22IR (1¼") 35mm,EW22IR (FE) (1"-28mm), EW22IR (FE) (1¼"-35mm).Transe SenseEW23CT (1") 28mm, EW23CT (1¼") 35mm,EW23CT (FE) (1"-28mm), EW23CT (FE) (1¼"-35mm).Tactile SwitchEW24TA (1") 28mm, EW24TA (1¼") 35mm,EW24TA (FE) (1"-28mm), EW24TA (FE) (1¼"-35mm).

Marking: Eco-Logic and product information printed on adhesive label on control box.

Installation Requirements : R001 R150         

Note: Single check valve to be installed on inlet to all valves.

Proviso:  

Manufacturer: Beta Valves / Asco Joucomatic Ltd

Factor: Eco-Logic (UK) EMPS Ltd

WRAS Approval Number  0806013

Print this entry

`Fluidmaster` WC flap valve flushing assembly with a polypropylene body and rubber main seal tank ball. Valve is operated via a chain which will be connected to cistern handle. Valve incorporates an internal overflow.

Size: 1½" BSP outlet.

Model: Fluidmaster 507UK.

Marking: `Fluidmaster` moulded onto body.`Fluidmaster` moulded onto flap.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Fluidmaster Inc

Factor: Fluidmaster De Mexico

WRAS Approval Number  1111051

Print this entry

`Fluid Master 502` flapper valve flushing device replacement assembly with a polypropylene body and main seal tank ball. The device is operated via a chain which will be connected to a cistern handle and incorporates an internal overflow. Cold water use only.

Size: 1½” outlet (replacement flap valve).

Model: 502 flapper assembly.

Marking: Fluidmaster, WRAS and product information on flap operating arm.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Fluidmaster Water Technology S de RL de CV

Factor: Fluidmaster Inc

WRAS Approval Number  0902054

Print this entry

Dual flush drop valve with ABS and PVC body and silicone rubber seating rubber. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2" BSP.

Model: Geberit Impuls 280.

Marking: `Geberit` and product information moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Geberit AG

Factor: Geberit Sales Limited

WRAS Approval Number  0809016

Print this entry

Dual flush drop valve with ABS and Styrene body and silicone seating washer. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2" BSP outlet.

Model: Impuls 260.

Marking: Geberit moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Geberit Plumbing Technology Shanghai Co Ltd

Factor: Geberit Technik AG

WRAS Approval Number  1107074

Print this entry

Range of WC dual flush drop valves with plastic bodies and silicon seals. The valves are operated via a push button assembly for either full or reduced flush. The operating assembly is cable operated for installation to the WC cistern lid. Valve incorporates an overflow. Cold water use only.

Size: 1½” BSP & 2” BSP male outlets.

Model: B220.

Marking: LAB B220 on operating mechanism.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: LAB (Xiamen) Sanitary Fittings Inc

Factor:  

WRAS Approval Number  0904024

Print this entry

Dual flush drop valve with ABS body and silicone rubber seating washer. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 1½” & 2” BSP.

Model: B218. Heights 224, 274, 304 & 354.

Marking: Product information and model no moulded onto body. Manufacturers name.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Lab (Xiamen) Sanitary Fittings Inc

Factor:  

WRAS Approval Number  1007072

Print this entry

WC dual flush drop valve with an ABS body and silicone seals. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2” BSP male outlet.

Model: Viva PP0025.

Marking: VIVA and VIVA logo on body.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer:  

Factor: Mercantile Ventures Ltd

WRAS Approval Number  1007077

Print this entry

WC dual flush drop valve with an ABS body and silicone seals. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 1½" male outlet.

Model: Viva PP0023.

Marking: ING B421, WRAS Approved Product and Viva & Viva logo on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Mercantile Ventures Ltd

WRAS Approval Number  1102059

Print this entry

Height adjustable WC flushing siphon with a plastic body and membrane and a EPDM seal. Cold water use only.

Size: 1½” male BSP outlet.

Model: AS01.

Marking: Viva, logo, model and product information on cap.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen Ing Sanitary Fittings

Factor: Mercantile Ventures Ltd

WRAS Approval Number  1103328

Print this entry

WC dual flush drop valve with an ABS body and silicon seal. The valve is pneumatically operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 1½” & 2” BSP.

Model: CJ302

Marking: Oceanwell CJ302 valve body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Oceanwell (Xiamen) Industrial Co Ltd

Factor:  

WRAS Approval Number  0904327

Print this entry

`ATLAS DD` Dual flush outlet valve with plastic body and EPDM rubber seals. The valve is operated by a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2" BSP Outlet.

Model: ATLAS DD.

Marking: Manufacturers logo moulded into body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Oliveira & Irmão, S.A.

Factor:  

WRAS Approval Number  0902050

Print this entry

`One Flush` adjustable height drop valve with polypropylene body and PVC seating washer. The valve is operated via a push button assembly and incorporates an internal overflow.

Size: 1½", 2" BSP outlet.

Model: One flush drop valve.

Marking: Torbeck and Opella moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Opella Limited

Factor:  

WRAS Approval Number  0903031

Print this entry

`Variflush` range of adjustable height dual flush drop valves with plastic body and PVC seating washer. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 1½", 2" BSP.

Model: Variflush adjustable height drop valve.

Marking: Opella, Torbeck moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Opella Limited

Factor:  

WRAS Approval Number  0910047

Print this entry

Range of WC dual flush siphons with polypropylene bodies, polypropylene diaphragms, PVC seals and EPDM washers.

Size: 7½", 8", 8½" and 9".

Model: DFA075, DFA080, DFA085, DFA090.

Marking: Opella and Opella logo moulded onto cap, made in England and AP90 moulded onto body. Opella dual flush siphon and operation instructions printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Opella Limited

Factor:  

WRAS Approval Number  1007041

Print this entry

WC dual flush drop valve with an ABS body and silicon seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2” BSP male outlet.

Model: A2415.

Marking: R&T, A2415 and product information moulded onto body.R&T (Xiamen) Plumbing Inc printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.

Factor:  

WRAS Approval Number  1106334

Print this entry

Dual flush valve with ABS body and SBR seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2” BSP Outlet

Model: D4_D

Marking: Roca on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Roca Sanitario

Factor:  

WRAS Approval Number  1106335

Print this entry

D2_D Dual flush valve with an ABS body. The valve is operated by a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2” BSP outlet

Model: D2_D

Marking: ROCA on float.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Roca Sanitario

Factor:  

WRAS Approval Number  1109387

Print this entry

WC dual flush drop valve with an ABS body and silicone seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. For cold water use only.

Size: 1 1/2” & 2” BSP.

Model: MFV1C - 1 ½” Outlet; 360mm cable length, MFV2C - 1 ½” Outlet; 800mm cable length, MFV3C - 2” Outlet; 360mm cable length & MFV4C - 2” Outlet; 800mm cable length.

Marking: SAS on Valve

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: SAS

Factor:  

WRAS Approval Number  0904330

Print this entry

`Optima 49` WC dual flush valve with plastic body. The valve is operated by a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2" outlet.

Model: OPTIMA 49.

Marking: `Siamp` moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Siamp

Factor:  

WRAS Approval Number  0904331

Print this entry

`Optima 50` WC dual flush valve with plastic body. The valve is operated by a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2" outlet.

Model: OPTIMA 50

Marking: `Siamp` moulded onto connection of operating button.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Siamp

Factor:  

WRAS Approval Number  0904334

Print this entry

`Verso 350` Mechanism dual flush outlet valve with ABS plastic body and NBR rubber seals. The valve is operated by a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2" outlet.

Model: Verso 350.

Marking: `Siamp` moulded onto float.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: SIAMP

Factor:  

WRAS Approval Number  1107082

Print this entry

WC dual flush drop valve comprising of a plastic body, silicone seating washer and an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Size: 2” BSP male outlet.

Model: Skipper 36A.

Marking: SIAMP on the float.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: SIAMP

Factor:  

WRAS Approval Number  1003043

Print this entry

`Unisiphon` single flush WC siphon with polyethylene body and diaphragm and NBR washer and `O` rings. The valve can be adjusted to the variable heights listed below in sizes.

Size: 2" BSP outlet, 7½", 8", 8½", 9", 9½" adjustable height.

Model: Unisiphon.

Marking: Siamp, Unisiphon, WRAS and product information moulded onto cap and size moulded into siphon tube.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Siamp Asean

Factor: Siamp

WRAS Approval Number  1106065

Print this entry

Turbo 88R Duo Flush Adjustable siphonic flushing apparatus with polypropylene body and stainless steel link for use with WC flushing cisterns.

Size: Variable height ranging from 7½’’ to 9½”

Model: Turbo 88R Duo Flush Adjustable Syphon

Marking: DUDLEY TURBO 88R, TD on siphon cap.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Thomas Dudley Ltd

Factor:  

WRAS Approval Number  1009040

Print this entry

`WDI` single WC flush valve operated via a single push button assembly and incorporating an internal overflow.

Size: 2” BSP outlet.

Model: `WDI` B4018.

Marking: B4018 on body.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: WDI (Xiamen) Technology Inc

Factor:  

WRAS Approval Number  1009041

Print this entry

`WDI` dual WC flush valve, operated via a two push button assembly and incorporating an internal overflow.

Size: 2” BSP outlet.

Model: B4900.

Marking: Watermark, WRAS and product information on body.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: WDI (Xiamen) Technology Inc

Factor:  

WRAS Approval Number  0807026

Print this entry

Dual flush drop valve with ABS and POM body and silicone seating washer. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. The operating assembly is cable operated for installation to the WC cistern lid.

Size: 2" BSP outlet.

Model: Expert 3 MWB3.

Marking: Wirquin and Wirquin logo moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Wirquin Plastiques

Factor:  

WRAS Approval Number  0807029

Print this entry

Dual flush drop valve with ABS and POM body and silicone seating washer. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2" BSP outlet.

Model: PRO MVB3.

Marking: Wirquin and Wirquin logo moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Wirquin Plastiques

Factor:  

WRAS Approval Number  1102058

Print this entry

`Jollysiphon` dual flush WC siphon with a polypropylene body, polyethylene diaphragm and SBS washer. Flush volume is adjusted via changing the position of the plug on the side of the valve. Cold water use only.

Size: 1½” BSP male outlet.

Model: Jollysiphon.

Marking: Wirquin on body and cap.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Wirquin Plastiques

Factor:  

WRAS Approval Number  0810020

Print this entry

Single flush siphonic flush valve with a polypropylene body and polyethylene main seal. The valve is operated via a metal lever.

Size: 1½" outlet, height 9½".

Model: Syphon flush valve.

Marking: `Wirquin` moulded into body.`Wirquin` moulded onto cap.`Wirquin Design 9½"` moulded into body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Wirquin Plastiques

Factor:  

WRAS Approval Number  0812065

Print this entry

Dual flush drop valve with ABS body and SBR seating washer. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2" BSP.

Model: NP248 (drop valve) & NK317 (push button assembly).

Marking: `Nison` moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen Chetan Sanitary Technology Co., Ltd.

Factor:  

WRAS Approval Number  0812064

Print this entry

Single flush drop valve with ABS body and SBR seating washer. The valve is operated via a push button assembly and incorporates an internal overflow. The operating assembly is cable operated for installation to the WC cistern lid.

Size: 2" BSP.

Model: NP253 (drop valve) & NK317 (push button assembly).

Marking: `Nison` moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen Chetan Sanitary Technology Co., Ltd.

Factor:  

WRAS Approval Number  1007042

Print this entry

WC dual flush drop valve with an ABS body and silicone seals. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 1 1/2 & 2” BSP male outlet.

Model: B421.

Marking: B421 and product information.ING moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen Ing Sanitary Fittings Ltd

Factor:  

WRAS Approval Number  1210056

Print this entry

Dual flush drop valve with ABS body and silicone seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Size: 2” BSP outlet

Model: A2432

Marking: UPC, CSA B125, 'WRAS Approved Product' and model number on top of valve body. R&T on overflow.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.

Factor:  

WRAS Approval Number  0809015

Print this entry

Dual flush drop valve with ABS and POM body and silicone seating washer. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2" BSP outlet.

Model: A2412.

Marking: R&T (Xiamen) Plumbing Inc printed on adhesive label on body.R&T, A2412, watermark and product information moulded onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen R&T Plumbing Technology Co. Ltd.

Factor:  

WRAS Approval Number  1012027

Print this entry

Range of WC dual flush valves with ABS bodies and SBR seals. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Size: 2” & 3” BSP outlets.

Model: 222601, 222702.

Marking: CRN on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Xiamen Runner Industrial Corp

Factor: