Section 1307

Print Entire Section

Flushing Mechanisms

Urinals

WRAS Approval Number  1212066

Print this entry

Range of urinal flushing mechanism with a solenoid valve controlling the flow. The valves are operated via an infra-red sensor or automatic timer-box. Maximum working pressure 12.0 Bar. Cold water use only.

Size: 15mm Compression

Model: HydroCell AQUHC, AQUHCU & AQUAM.

Marking: Aqualogic water conservation, company web address and phone number on control box. Sirai and technical information on coil of solenoid.

Installation Requirements : R001 R075 R120       

Note:  

Proviso:  

Manufacturer:  

Factor: Aqualogic WC Ltd.

WRAS Approval Number  1210021

Print this entry

Range of infra-red sensor controlled urinal flush valves and link box. The solenoid assemblies incorporate a stainless steel filter and plastic flow restrictor. The solenoids are of the normally closed type. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Size: ½” female BSP inlet.

Model: Sensorflow 21-A4188XJ. Sensorflow 21-A4189XJ. Sensorflow 21-A4187XJ.

Marking: Armitage Shanks on sensor plate.

Installation Requirements : R001 R078 R120       

Note:  

Proviso:  

Manufacturer: Ideal Standard International

Factor: Armitage Shanks

WRAS Approval Number  1203067

Print this entry

‘UC01 – 019’ and ‘UC01-25 Pearl’ range of infra-red, sensor controlled, urinal flush valves incorporating a normally closed solenoid valve controlling the flow. Maximum working pressure 8.0 bar. Cold Water use only.

Size: 15mm compression inlet/outlet.

Model: UC01 - 019 Pearl (battery).UC01 - 025 Pearl (mains).

Marking: DVS, Dartvalley, Pearl & contact info on sensor housing.

Installation Requirements : R001 R075 R120       

Note:  

Proviso:  

Manufacturer: Dart Valley Systems Ltd

Factor:  

WRAS Approval Number  1203066

Print this entry

‘UC01-027 Pearl Solo’ infra-red, sensor controlled, urinal flush valves incorporating a normally closed solenoid valve controlling the flow. Maximum working pressure 8.0 bar. Cold water use only.

Size: 15mm compression inlet/outlet.

Model: UC01-027 Pearl Solo

Marking: DVS, Dart Valley, Pearl and contact info on sensor housing.DVS and product information on transformer housing.

Installation Requirements : R001 R075 R120       

Note:  

Proviso:  

Manufacturer: Dart Valley Systems Ltd

Factor:  

WRAS Approval Number  1201050

Print this entry

`Autosave` range of infra-red sensor controlled flush urinal valves. The unit comprises a normally closed solenoid valve and an infra-red sensor. Maximum working pressure 12.0 bar. Cold Water use only.

Size: 15mm compression inlets/outlets.

Model: Autosave B01 - 6V DC, Autosave B02 - 6V DC, Autosave M01 - 240 AC & Autosave M02 - 240 AC.

Marking: Autosave, model, Watersavers and contact number on body.

Installation Requirements : R001 R075         

Note:  

Proviso:  

Manufacturer: Watersavers

Factor:  

WRAS Approval Number  1111318

Print this entry

Range of automatic urinal flush controllers with a solenoid valve controlling the flow. The flow is operated via an infra red sensor. Maximum working pressure 12 bar.

Size: OP1 Prestex Optiflush (Mains) - Code 599002. OP2 Prestex Optiflush (Battery) - Code 599001. SO2 Solenoid Valve - Code 817125.

Model: 15 mm compression.

Marking: Prestex Optiflush on control box & solenoid housing.

Installation Requirements : R001 R075         

Note:  

Proviso:  

Manufacturer:  

Factor: Pegler Yorkshire Group Ltd

WRAS Approval Number  0812045

Print this entry

`Smartflush` electronic urinal flushing mechanism with a solenoid valve controlling the flow. The valves are operated via an infra red sensor. Maximum working pressure 12.0 bar.

Size: 15mm BSP.

Model: Smartflush Type UFCB6.

Marking: Smarflush and company information printed on front panel.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Alchemytech Consulting

Factor: Chess Plc

WRAS Approval Number  1004331

Print this entry

Infra-red sensor controlled flush urinal valve. The unit comprises a normally closed solenoid valve (IMI Webber), and an infra-red sensor. Maximum working pressure 6.0 bar.

Size: 15 mm compression.

Model: IRC- Cistermiser Infrared Control.

Marking: Cistermiser infrared control printed onto control box casing.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Cistermiser Ltd

Factor:  

WRAS Approval Number  1004332

Print this entry

`STD` hydraulically operated regulating valve having a plastic body incorporating a phosphor bronze bellows. The units are designed for use on the mains or tank-fed systems above 5m head. Maximum working pressure 9 bar.

Size: ½" BSP (F).

Model: STD- Cistermiser Hydraulic Standard Valve.

Marking: Cistermiser moulded into body. Cistermiser, company contact details and serial number printed on adhesive label.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Cistermiser Ltd

Factor:  

WRAS Approval Number  1007027

Print this entry

Range of autosyphons for use with urinals with ABS and polystyrene bodies. Supplied with plastic backnuts.

Size: 140mm (5½”) - 4.5 litre (1 Gallon) ¾”, 1”, 1¼” BSP outlet. 159mm (6¼”) - 9 litre (2 Gallon) 1”, 1¼” BSP outlet. 191mm (7½”) - 13.5 litre (3 Gallon) 1”, 1¼” BSP outlet 210mm (8¼”) - 18 litre (4 Gallon) 1” BSPT 1¼” BSP outlet. 235mm (9¼”) - 22.5 litre (5 Gallon) 1” BSPT 1¼” BSP outlet.

Model: BBS Autosyphons.

Marking: B.B.S Auto Syphon, BS 1876 tested, Masefield Epson Ltd and size moulded onto body. B.B.S Autosyphon and setting up instructions printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Masefield – Epson Limited

Factor: Thomas Dudley Limited