Section 2010

Print Entire Section

Valves

Blending, thermostatic

WRAS Approval Number  1112312

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating half turn ceramic disc headwork, dome type operating members and manually operated diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C

Size: ½” – ¾” off set unions

Model: Grohtherm 3000 34.185

Marking: Grohe on body

Installation Requirements : R001 R020 R040       

Note: This approval does not include hose and handset

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1204015

Print this entry

`Intamix Solar` concealed thermostatic mixing valve with zinc plated brass body, incorporating a manually operated temperature control with dome type operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 28mm or 22mm compression inlets.1” BSP male outlet.

Model: Intamix Solar – 50022SR (22mm compression inlets & 1” BSP male outlet). Intamix Solar – 50028SR (28mm compression inlets & 28mm outlet).

Marking: Hot & cold, TX, MIX and direction of flow arrow on body. Inta on operating member.

Installation Requirements : R001 R010 R120 R040     

Note: This approval does not include shower hose and handset

Proviso:  

Manufacturer: Thermomat Srl.

Factor: Intatec Ltd

WRAS Approval Number  1112007

Print this entry

Range of thermostatic concealed shower valves (brass body) incorporating a quarter turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Model AQ20 incorporates a single shower outlet and model VQ21 incorporates a double shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: ½” female BSP inlets/outlets.

Model: VQ20 & VQ21 thermostatic valves.

Marking: Product information on body. UF on headworks

Installation Requirements : R001 R010 R040       

Note: This approval does not include hose, handset or operating members.

Proviso:  

Manufacturer: Valquest Ltd

Factor:  

WRAS Approval Number  1112006

Print this entry

Range of bar type exposed wall mounted thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow and single lever, dome or cross top operating members. The temperature is controlled independently via a thermostatic cartridge and single lever, dome and cross top operating members which incorporate a manual override. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: ½” x ¾” offset unions.

Model: D6000, VSN6000 & EPR6000.

Marking: DTC37 on body.DTC37 on headwork.

Installation Requirements : R001 R010 R040       

Note: This approval does not include hose or handset.

Proviso:  

Manufacturer: Methven UK

Factor:  

WRAS Approval Number  1112322

Print this entry

T-Type thermostatic mixing valve with a gunmetal body and a thermostatic cartridge controlling the temperature. Both hot and cold inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2) & stainless steel strainers. Maximum working pressure 10 bar & maximum operating temperature 60°C.

Size: 22mm compression inlets & ¾” BSP female outlet

Model: Horne 25 H2501

Marking: Horne 25 on body

Installation Requirements : R001 R010         

Note:  

Proviso:  

Manufacturer: Horne Engineering Co Ltd (The)

Factor:  

WRAS Approval Number  1112321

Print this entry

T-Type thermostatic mixing valve with a gunmetal body and a thermostatic cartridge controlling the temperature. Hot and cold inlets incorporate a single check valve cartridge assembly (suitable for backflow protection against fluid category 2) and both inlets are supplied with or without a spherical valve and stainless steel strainers. Maximum working pressure 10 bar & maximum operating temperature 85°C.

Size: 22mm compression inlets & ¾” BSP female outlet

Model: Horne 20 H2003

Marking: Horne 25 on body

Installation Requirements : R001 R010         

Note:  

Proviso:  

Manufacturer: Horne Engineering Co Ltd (The)

Factor:  

WRAS Approval Number  1112041

Print this entry

Wall mounted bar type thermostatic shower valve (chromium plated brass) incorporating non rising spindle headwork controlling the flow and single lever operating members. The temperature is controlled independently via a thermostatic cartridge and lever operating member incorporating a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and a stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Size: ¾” BSP x ½” BSP offset unions.

Model: CVN 26232.

Marking: `LC` on body.

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: M & Z Spa Rubinetteria

Factor:  

WRAS Approval Number  1112314

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating half turn ceramic disc headwork, dome type operating members and manually operated diverter to shower outlet. The spout outlet incorporates a plastic aerator & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C

Size: ½” BSP (M)

Model: Grohtherm 3000 34.187

Marking: Grohe on body

Installation Requirements : R001 R020 R040       

Note:  

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1112080

Print this entry

Range of wall mounted concealed thermostatic shower valves (brass body) incorporating a quarter turn ceramic disc headwork controlling the flow with a range of single lever, dome or cross top operating members. The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2) and stainless steel strainers. Model WLBP1000RC+ incorporates a single shower outlet. Models WLBP2000RC+ and WLBP2001RC+ incorporates a double shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Size: ¾” BSP female inlets.

Model: Base models WLBP1000RC+, WLBP2000RC+ & WLBP2001RC+ with the following lever options: Modest (MOTHL03), Logic (LOTHL03), Zeya (ZETHL03), Alvend (ALTHL03), Totti (TOTHL03), Kai (KLTHLS03), Design (DETHL03) & Pursuit (PUTHL03).

Marking: WLBP1000RC+ - CW1 on body.WLBP2000RC+ - CW2 on body.WLBP2001RC + - CW2 on body

Installation Requirements : R001 R010 R040       

Note: This approval does not include shower hose and handset

Proviso:  

Manufacturer: Crosswater Holdings Ltd

Factor:  

WRAS Approval Number  1112311

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating half turn ceramic disc headwork, dome type operating members and manually operated diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C

Size: Model 34.174: ½”- ¾” offset unionModel 34.175: ¾” BSP (F)

Model: Grohtherm 2000 34.174 & 34.175

Marking: Grohe on body

Installation Requirements : R001 R010 R040       

Note: This approval does not include hose and handset

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  0812337

Print this entry

Thermostatic mixing valve (chromium plated brass) having manually operated thermostatic temperature controls with dome type operating members. Maximum working pressure 16.0 bar

Size: 15mm inlet connections.

Model: Faucets Therm-8 (HEAT 160 650).

Marking: Faucets & Faucets Therm-8 on cap. Six digit unique identification code & Faucets Therm-8 printed on body. Flow arrow on body.

Installation Requirements : R001 R010 R040 R120     

Note:  

Proviso:  

Manufacturer:  

Factor: Faucets Ltd.

WRAS Approval Number  1203013

Print this entry

Two hole (fixed) thermostatic bath shower mixer (chromium plated brass) incorporating a quarter turn ceramic disc headwork`s controlling the flow with single lever operating member and self-cancelling diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with single lever operating member. Both inlets incorporate single check valve cartridge (suitable for backflow protection against Fluid Category 2) & the product is supplied with metal backnuts. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Size: ¾" BSP male inlets

Model: A4989AA Piccolo 21 DC 2TH thermostatic bath shower mixer

Marking: Armitage Shanks on operating member.

Installation Requirements : R001 R030         

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer:  

Factor: Armitage Shanks

WRAS Approval Number  1201079

Print this entry

Wall mounted bar type thermostatic shower valve (chromium plated brass) incorporating quarter turn ceramic disc headwork controlling the flow and dome operating member. Temperature is controlled independently via a thermostatic cartridge and dome operating member which incorporates a manual override button. Both inlet connections incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Size: ½” x ¾” offset unions.

Model: 86002240.

Marking: Triton on body.

Installation Requirements : R001 R010 R040       

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer:  

Factor: Triton Showers

WRAS Approval Number  1212314

Print this entry

Range of concealed thermostatic mixing valves with solenoid valves at the inlet. Both inlets supplied with stainless steel strainers and check valve cartridges (suitable for backflow protection against Fluid Category 2). A separate remote controller for flow and temperature control is supplied. Maximum working pressure: 5.0 bar for high pressure versions and 1.0 bar for low pressure versions. Maximum operating temperature 45°C.

Size: 15mm

Model: 1.1796.001 Mira Dual Digital Mixer Shower (ceiling fed, high pressure). 1.1796.002 Mira Dual Digital Mixer Shower (ceiling Fed, pumped). 1.1796.003 Mira Dual Digital Mixer Shower (rear fed, high pressure). 1.1796.004 Mira Dual Digital Mixer Shower (rear fed, pumped). 1.1796.005 Mira Dual Digital Mixer Shower (high pressure valve without fittings) 1.1796.006 Mira Dual Digital Mixer Shower (pumped valve without fittings). 1.1796.007 Mira Dual Digital Mixer Shower (remote controller accessory).

Marking: 'Mira Showers' on controller

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Kohler Mira Limited

Factor:  

WRAS Approval Number  1305306

Print this entry

Range of T type thermostatic blending valves with gunmetal bodies, incorporating single check valve cartridges at each inlet (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 1¼” BSP (M) 1½” BSP (M) 2” BSP (M)

Model: Horne 32, Horne 40, Horne 50

Marking: Size on body. Manufacturers name and contact details on data plate

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Horne Engineering Co Ltd (The)

Factor:  

WRAS Approval Number  1112315

Print this entry

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating half turn ceramic disc headwork, dome type operating members and manually operated diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Size: ¾” BSP (F) Captive nut

Model: Grohtherm 2000 34.202

Marking: Grohe on body

Installation Requirements : R001 R010 R020 R040 .   

Note: This approval does not include hose and handset

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1006056

Print this entry

Exposed bar thermostatic shower valve with chromium plated brass body. Flow is controlled via a ceramic disc headwork with lever type operating member (chromium plated brass) and temperature via a thermostatic cartridge with lever type operating member (chromium plated brass) which incorporates a manual override button. Both hot and cold water inlets and outlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 3) and stainless steel strainers. Maximum working pressure 10.0 bar.

Size: ¾” - ½” BSP offset union inlet connectors. ½” BSP outlet.

Model: SMV-001.

Marking: SMV-001 & AKW logo on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: AKW Ltd

WRAS Approval Number  1204014

Print this entry

Concealed, T-type thermostatic mixing valve with brushed chrome brass body. The temperature is set under fixed cap. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: ¾” BSP male inlets and ½” BSP male outlet.

Model: 71015CP.

Marking: 71015CP, W27/11, H, CR, C MIX, direction of flow arrow and1 on body.

Installation Requirements : R001 R040 R120       

Note:  

Proviso:  

Manufacturer: Huber Spa

Factor: Intatec Ltd

WRAS Approval Number  1204004

Print this entry

Deck mounted exposed thermostatic tap (chromium plated brass), incorporating a sequential thermostatic cartridge controlling both temperature and flow with a single lever operating member. Both inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2), plastic flow regulators, spherical valves and stainless steel strainers. The outlet incorporates a plastic flow straightener & the product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Size: ½" Male BSP Inlets

Model: Performa Healthcare Plus – 360101.

Marking: 360101 H06121426, company logo & H2360100 PY on body. Performa on operating member.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

Factor:  

WRAS Approval Number  1204003

Print this entry

Range of wall mounted exposed thermostatic taps (chromium plated brass), incorporating a sequential thermostatic cartridge controlling both temperature and flow with a single lever operating member. Both inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2), plastic flow regulator, spherical valves and stainless steel strainers. The outlet incorporates a plastic flow straightener & the products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Size: 1/2" Male BSP Inlets

Model: Performa Healthcare Plus – 360100.Performa Healthcare Plus – Retrofit – 360102.

Marking: 360100 PERFORMA on operating member.360102 H06121426, company logo, H2360100 PY on body and PERFORMA on operating member.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Pegler Yorkshire Group Ltd

Factor:  

WRAS Approval Number  1203047

Print this entry

FMM Range of wall mounted thermostatic shower blending valves (chromium plated brass) incorporating a rising spindle headwork`s controlling the flow with dome operating members. Temperature is controlled independently via a thermostatic cartridge with dome operating member and incorporating a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C

Size: ¾ x ½ Offset Inlet connections and ½ BSP outlet

Model: 9210-7800 (bottom outlet) and 9211-7800 (top outlet).

Marking: FM Mattsson, FMM, model number and DR on body.

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: Ostnor AB

Factor:  

WRAS Approval Number  1203045

Print this entry

Range of horizontally or vertically wall mounted concealed thermostatic shower valves (brass body) incorporating a quarter turn ceramic disc headwork’s controlling the flow with dome, single lever or cross top operating members, the temperature is controlled independently via a thermostatic cartridge with dome, single lever or cross top operating members. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category2) and stainless steel strainers. Valves are available in single or double outlets. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: ½” BSP female inlets/outlets.

Model: Single outlet:LEVVDUAT02, LEVVDUAT03, SQUVDUAT04, SQUVDUAT05,TRAVDUAT06,TRAVDUAT07, CRLVDUAT08, CRLVDUAT09 , KIRI 2V & KAHA 2V.Double outlet:LEVVTRIT01, LEVVTRIT02, SQUVTRIT03, SQUVTRIT04, TRAVTRIT05, TRAVTRIT06, CRLVTRIT07, CRLVTRIT08,KIRI 3V & KAHA 3V.

Marking: Double outlet models: `Deva` or `Methven and DTV3` on coverplate.TCB, hot and cold on body.Single outlet model: `Deva` or `Methven and DTV2` on coverplate.DCB, hot and cold on body.

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: Methven UK

Factor:  

WRAS Approval Number  1112020

Print this entry

Concealed manually operated thermostatic blending valve with cast brass body. Hot and cold inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and plastic strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Size: ½” BSP female inlets and outlets.

Model: Grohe Rapido T- 35.500

Marking: Grohe and product information on plastic housing.

Installation Requirements : R001 R040         

Note: This approval does not include shower hose and handset.

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1203028

Print this entry

‘Axor Starck Shower Collection’ range of wall mounted concealed thermostatic blending valve assembly sets (cast brass bodies with chromium plated operating members and face plates). Incorporating non rising spindle headwork’s controlling the flow with dome type operating members. The temperature is controlled independently via a thermostatic cartridge and dome type operating member which also incorporates a manual override button. Inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: ¾” BSP female inlets/outlet.

Model: Axor Starck Shower Collection 10 750 180 Thermostat module basic set. 10 751 000 Thermostat module finish set. 10 754 180 Basic set thermostat for concealed installation. 10 755 000 Thermostat finish set. Model added October 2012: 12 712 000 Axor Starck Organic thermostat finish set. 10 650 180 Basic set hand shower module.

Marking: 10 750 180 - Hansgrohe & serial no on body. 10 751 000 - Axor Hansgrohe on operating member. 10 754 180 - Hansgrohe & DR on body. 10 755 000 - Axor Hansgrohe on operating member. 12 712 000 - Axor Hansgrohe on face plate. 10 650 180 - Hansgrohe & DR on body.

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: Hansgrohe AG

Factor:  

WRAS Approval Number  1201021

Print this entry

Grohtherm 3000 Cosmopolitan wall mounted bar type thermostatic shower valve (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow and diverting from bath to shower outlet with dome type operating member. Temperature is controlled independently via a thermostatic cartridge with dome operating member incorporating a manual override. Both inlets incorporate single check valve cartridges (suitable for backflow protection against fluid category 2) and stainless steel strainers. Spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C

Size: ½” to ¾” BSP offset union inlets

Model: Grohtherm 3000 Cosmopolitan 34.276.000

Marking: Grohe and product information on body.

Installation Requirements : R001 R010 R040       

Note: This approval does not include a shower hose and handset.

Proviso:  

Manufacturer: Grohe AG

Factor:  

WRAS Approval Number  1204016

Print this entry

Wall mounted, two hole, thermostatically controlled combination tap assembly (chromium plated brass), incorporating a non rising spindle headwork`s controlling the flow with a range of dome operating members. Temperature is controlled independently via a thermostatic cartridge with a range of dome operating members, the operating members incorporates a temperature limiting button with a manual override facility. Both inlets incorporate a single check valve cartridges (suitable for backflow protection against Fluid Category 2), stainless steel strainers with a plastic flow straightener in the spout outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: ¾” x ½” offset unions.

Model: TL-50010CP - Inta Tele bath filler & 50010CP - Inta Ion bath filler. Model added January 2013: AC50010CP - Acura.

Marking: Hot, cold, Intatec, date of manufacture (MM/YY) & model number on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Huber Spa

Factor: Intatec Ltd

WRAS Approval Number  1203002

Print this entry

Range of bar-type exposed wall-mounted thermostatic shower valves (chromium-plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow and dome operating-member. The temperature is controlled independently via a thermostatic cartridge and dome operating member which incorporates a manual override button. Both inlet unions incorporate a single check-valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Size: ½” - ¾” BSP offset unions.

Model: `Clease` B30012 & B30014.

Marking: WRAS-CL on body.

Installation Requirements : R001 R040         

Note: This approval includes shower hose and handset.

Proviso:  

Manufacturer: Xiamen Clease Industries Co. Ltd

Factor:  

WRAS Approval Number  1112096

Print this entry

Range of concealed thermostatic shower valves (brass bodies) incorporating a quarter turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size: ½” female BSP inlets/outlets.

Model: Ocean GDMDC3SVCP, Ocean Rectangular GDMSQDCVCP, Ocean Round GDMRDCVCP, Atlantic GDAC3SVCP, Atlantic Round GDAC3RSVCP, Cooker GDCSVCP, Dudok DO90, Flat FT92, Jas JAS90 & Ort OT90.

Marking: GD & DCB on valve body.

Installation Requirements :             

Note: This approval does not include hose, handset or operating members.

Proviso:  

Manufacturer:  

Factor: Grange Developments 2000 Ltd.

WRAS Approval Number  1201313

Print this entry

Range of wall mounted, bar type thermostatic shower valves (chromium plated brass) incorporating quarter turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and a stainless steel strainer and the products are supplied with shower hose and handset. Maximum working pressure 5.0 bar & maximum supply temperature 85°C.

Size: React: ½” BSP (M). Resolve & Reflex: ½” BSP (M) - supplied with ½” x ¾” offset unions.

Model: Mira React 2.1744.002. Mira Resolve 2.1744.019. Mira Reflex 2.1744.020.

Marking: Mira Showers on body

Installation Requirements : R001 R010 R040       

Note: This approval includes shower hose and handset.

Proviso:  

Manufacturer: Kohler Mira Ltd

Factor:  

WRAS Approval Number  0809072

Print this entry

Range of thermostatic mixing valves with nickel plated brass bodies. The temperature is set via turning a brass control knob and locked in position by an anti-tamper proof sleeve. Both hot and cold water inlets incorporate single check valves (Neoperl DN20). Maximum working pressure 10.0 bar.

Size: TM150-3/4E - 15mm inlets/outlet. TM150-3/4H - 22mm inlets/outlet.

Model: TM150-3/4E & TM150-3/4H.

Marking: TM150, TMV3, Honeywell & four digit manufacturing code on body. Direction of flow arrow on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Honeywell

WRAS Approval Number  1201010

Print this entry

Wall mounted exposed bar type thermostatic shower valve (chromium plated brass body) incorporating half turn ceramic disk headwork controlling both flow and diverts from the top outlet to the bottom outlet with dome operating member. Temperature is controlled independently via a thermostatic cartridge and dome operating members incorporating a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating pressure 55°C.

Size: ½” x ¾” offset unions.

Model: Clease - B36125.

Marking: WRAS CL on body.

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: Xiamen Clease Industries Co. Ltd

Factor:  

WRAS Approval Number  1203044

Print this entry

Two hole, single outlet (fixed) thermostatic bath shower mixer (chromium plated brass) incorporating a ceramic cartridge headwork`s controlling the flow with single lever operating member and manually operated diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with single lever operating member. The temperature has an automatic temperature reduction when diverting from bath to shower. Both inlets and shower outlet incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2 to prevent backflow into the supplies and Fluid Category 3 protection for shower outlet). The inlets incorporate stainless steel strainers & the product is supplied with metal backnuts. Maximum Working Pressure 5.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP male inlets.

Model: 1.1598.001 supplied with hose and handset.1.1598.002 supplied without hose and handset.

Marking: Mira on indice.

Installation Requirements : R001 R040         

Note: This product is supplied with or without an approved shower hose or hand set.

Proviso:  

Manufacturer: Kohler Mira Limited

Factor:  

WRAS Approval Number  1212012

Print this entry

Single hole, single outlet thermostatic tap (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with dome operating member and a self-cancelling diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with dome operating member and manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2). This approval includes hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: 15mm copper tails

Model: A5667AA Ceramix Blue water giant bath/shower mixer.

Marking: Ideal Standard on operating member and shower handset. E,A,W ¾ on thermostatic cartridge.

Installation Requirements : R001 R006 R030       

Note:  

Proviso:  

Manufacturer: Ideal Standard Produktions - GmbH

Factor: Ideal Standard

WRAS Approval Number  1203337

Print this entry

Wall mounted exposed thermostatic bar type shower mixing valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork with a dome type operating member diverting the flow to a shower head and handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Both hot and cold water inlets incorporate stainless steel strainers, and the offset unions incorporate single check valve cartridges (suitable for backflow prevention against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: ½” to ¾” off-set union

Model: F14A4103

Marking: Globe Union on body

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Shen Zhen Globe Union Industrial Corp

Factor: Globe Union Industrial Corp

WRAS Approval Number  1203336

Print this entry

Range of wall mounted or concealed thermostatic blending valve (chromium plated brass) with a single lever controlling the flow and temperature and an 8” fixed showerhead. Maximum working pressure 6.0 bar & maximum operating temperature 85°C.

Size: 15 mm compression

Model: 1.0.437.61.1 - Mira Mode BIR.1.0.437.60.1 - Mora Mode ER.

Marking: MODE on body.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Kohler Mira Ltd

Factor:  

WRAS Approval Number  1304020

Print this entry

Range of T-type thermostatic mixing valves with brushed chrome brass body, manually adjustable temperature control and dome operating member. Both inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2). Model P11A20N00L2 is supplied with check valve cartridges and holders. Model P11A20N00 is not supplied with check valve cartridges or holders. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: 3/4” BSP male inlets and outlets.

Model: P11A20N00L2 & P11A20N00.

Marking: Company logo, H, C, flow arrow, CR and Mix on body. Made in Italy, KV 2.3 Company logo, min & max temperatures and max Pressure on operating member.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Barberi SrL

Factor:  

WRAS Approval Number  1212018

Print this entry

Wall mounted, exposed thermostatic blending valves (chromium plated brass bodies) incorporating quarter turn ceramic disc headworks to control the flow and a thermostatic cartridge to control the temperature. Both are operated using dome type operating members. Inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C

Size: 15mm compression inlets.

Model: A4813AA - Ceratherm 100.

Marking: Ideal standard on operating member

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Standard

WRAS Approval Number  1210008

Print this entry

`SOLARINCAL-T PLUS` concealed thermostatic mixing valve with chrome plated brass body, incorporating manually operated temperature controls and plastic dome type operating members. The cold and solar inlets incorporate single check valves (suitable for backflow protection up to fluid category 2) and stainless steel strainers. Maximum working pressure 10 bar. Maximum operating temperature 99°C.

Size: ¾" BSP male inlet/outlets

Model: 263350 SOLARINCAL-T PLUS

Marking: Caleffi, Logo, Mix, Solar and CR on body. Technical information on operating members. Caleffi solar on insulation.

Installation Requirements : R001 R010 R040 R120     

Note:  

Proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20°C and 45°C. Where disinfection by heating is relied on to meet this obligation, information on minimum conditions for thermal disinfection of Legionella bacteria can be found on the WRAS website - www.wras.co.uk <http://www.wras.co.uk>

Manufacturer: Caleffi S.p.A

Factor:  

WRAS Approval Number  1305304

Print this entry

Wall mounted thermostatic blending valve with various finishes and operating members. Both inlets incorporate single check valve cartridges (suitable for backflow prevention against fluid category 2) and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Size: ½” BSP (M)

Model: V640-XX ½” Exposed Thermo Shower Valve This product is available in a number of different finishes. (please note the suffix “XX” will be replaced with the finish acronym specified below) : CP = Chrome Plated, PN = Polished Nickel, SSF = Stainless Steel Finish. MBC = Matt Black Chrome. There are a number of controller options. The references would be as follows: V640 X - XX Cross Top V640 XB - XX Cross Top - Black V640 M - XX Metal Lever V640 MB - XX Metal Lever - Black

Marking: Samuel Heath on body

Installation Requirements : R001 R040         

Note: Not supplied with hose and handset

Proviso:  

Manufacturer: Samuel Heath & Sons Plc

Factor:  

WRAS Approval Number  1212023

Print this entry

Range of wall mounted exposed or concealed manually adjustable thermostatic shower valves (chromium plated brass). Flow and temperature is controlled via a thermostatic cartridge, the flow control with single lever operating member and temperature control with a dome operating member. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2), Isolation valves, stainless steel strainers and flow restrictors. Maximum working pressure 5.0 bar & maximum operating temperature 90°C.

Size: 15mm compression inlets and outlet.

Model: AVANCE ELAN Shower Valve Exposed 551301 and 551301L, Recessed 551311 and 551311L.

Marking: 551301 and 551301L: Elan Douglas Delabie on face side and Delabie on underside of operating member. S551311 and 551311L: Saracen on face side and Delabie on underside of operating member.

Installation Requirements : R001 R040 R120       

Note: This approval does not include shower hose and handset

Proviso:  

Manufacturer:  

Factor: Douglas Delabie

WRAS Approval Number  1301322

Print this entry

Bar type, exposed, wall mounted thermostatic bath/shower valve (chromium plated brass) incorporating half turn ceramic disc headwork controlling the flow and a self-cancelling diverter to shower outlet. The temperature is controlled by a thermostatic cartridge & the product is supplied with lever operating members. The outlet incorporates a plastic aerator. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Size: ½” BSP (M)

Model: 13 141 000 Hansgrohe Ecostat Select

Marking: Hansgrohe on body

Installation Requirements : R001 R030 R040       

Note: This approval does not include hose and handset

Proviso:  

Manufacturer: Hansgrohe SE

Factor:  

WRAS Approval Number  1210090

Print this entry

T-type thermostatic mixing valve with brushed chrome brass body. Temperature is pre-set under fixed cap. Both inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar & maximum operating temperature 60°C.

Size: 15mm compression inlets and outlets.

Model: SF1337XX.

Marking: A & J Gummers, Sirrus MT503 & technical information on cap. H, C flow arrow & Mix on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Twyford Bathrooms

WRAS Approval Number  1207010

Print this entry

Range of concealed thermostatic blending valves (DZR brass). Incorporating a thermostatic cartridge controlling the temperature & single check valve cartridges on both inlets (suitable for backflow protection against fluid category 2) Maximum working pressure 10 bar. Maximum operating temperature 80°C.

Size: ¾” BSP female inlets½” BSP female inlets

Model: 35.516.970.90.35.436.970.90 & 35.416.970.90.

Marking: Dornbracht and DZR on body

Installation Requirements : R001 R010 R040 R120     

Note:  

Proviso:  

Manufacturer: Aloys F Dornbracht GmbH & Co KG

Factor:  

WRAS Approval Number  1207009

Print this entry

Range of concealed thermostatic blending valves (DZR brass) incorporating quarter turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge. Both inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Size: ¾” BSP female inlets.

Model: 35.526.970.90, 35.546.970.90, 35.528.970.90 & 35.548.970.90.

Marking: Dornbracht and DZR on body.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Aloys F Dornbracht GmbH & Co KG

Factor:  

WRAS Approval Number  1207001

Print this entry

Range of Mira Discovery dual wall mounted concealed thermostatic shower control valves. Cast brass incorporating quarter turn ceramic disc headwork controlling the flow, and single lever operating member. The temperature is controlled independently via a thermostatic cartridge and dome operating member. The valve incorporates stainless steel filters and check valves on both the cold and hot inlets. Maximum working pressure 5 bar & maximum operating temperature 60°C.

Size:  15mm Compression inlets and outlet

Model: Mira Discovery Dual (valve only). Mira Discovery Dual BIV (includes hose and handset).Mira Discovery Dual BIR (fixed showerhead and arm).

Marking: Mira Discovery on control panel.4223L on cold inlet & 4224R on hot inlet.Mira Showers on both shower heads.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Kohler Mira Limited

Factor:  

WRAS Approval Number  1001048

Print this entry

Thermostatic blending valve with chromium plated brass body. The temperature is pre-set under fixed cap which can be manually adjusted via an allen key. Hot and cold water inlet union connectors incorporate single check valves. Maximum working pressure 10.0 bar.

Size: 22mm compression inlet/outlet.

Model: SF1338XX.

Marking: A&J Gummers Sirrus MT753 & operating temperatures on cap. H&C, flow arrow & Mix on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer:  

Factor: Twyford Bathrooms

WRAS Approval Number  1301318

Print this entry

Wall mounted, concealed thermostatic blending valve (chromium plated brass) incorporating a thermostatic cartridge controlling both the flow and temperature. The inlets incorporate stainless steel strainers and single check valve assemblies (suitable for backflow prevention against fluid category 2). The valve can be supplied with a number of trim sets. Maximum working pressure 5.0 bar & maximum operating temperature 38°C.

Size: ½” BSP (F)

Model: V161-IS-XX for use with the following trim sets : V361-T-XX V461-T-XX V261-TM-XX, V261-TC-XX, V261-TW-XX, V261-TGB-XX, V261-TGC-XX, V261-TSB-XX & V261-TSC-XX V161-T-XX Trim sets added March 2013: V661-TM-XX & V661-TMB-xx The first 4 characters of the control number is the style. The T stands for Trim. If the T is immediately followed by a sequence of up to 2 letters this donates the lever type : M = Metal Lever MB = Metal lever black C = Ceramic lever W = Wood GB = Organic Crystal Levers GC = Clear organic Crystal SB = Black Geometric Crystal SC = Clear Geometric Crystal Please note the suffix XX will be replaced with the finish acronym from the list below : CP = Chrome Plated SSF = Stainless Steel Finish AG = Antiques Gold PN = Polished Nickel

Marking: Samuel Heath on backplate

Installation Requirements : R001 R040 R120       

Note:  

Proviso:  

Manufacturer: Samuel Heath & Sons Plc

Factor:  

WRAS Approval Number  1212034

Print this entry

Wall mounted, thermostatic mixing tap (chromium plated DZR brass). Flow and temperature is controlled via a sequential headwork and a single lever operating member. The inlets incorporate single check valve cartridges with flow regulators (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Size: 10mm compression copper tails

Model: MT04-001

Marking: DVS on operating member. DVS and product code on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Dart Valley Systems Ltd

Factor:  

WRAS Approval Number  0904085

Print this entry

Concealed thermostatic mixing valve with DZR brass body and pre-set temperature setting. Hot and cold water inlet unions incorporate single check valves (DN15 TK) (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar.

Size:  

Model: A5900AA - 15mm compression inlet/outlet. A5901AA - 22mm compression inlet/outlet.

Marking: Ideal Standard, Mix, and CR on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Ideal Standard

WRAS Approval Number  1209085

Print this entry

Range of concealed and exposed thermostatic blending valves (chromium plated brass bodies) incorporating half turn ceramic disc headworks to control the flow with single lever operating members. Temperature is controlled independently via a thermostatic cartridge and incorporates a thermostatic manual override button with single lever operating member. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure - 10 Bar. Maximum operating temperature - 46°C.

Size: ¾” BSP Female inlets. ¾” BSP Female outlet.

Model: KJ8074700 - exposed with single lever operating members. KJ8074702 - exposed with single lever operating members. KJ8074120 - concealed with single lever operating members and round faceplate. KJ8074121 - concealed with single lever operating members and square faceplate.

Marking: Kingjoy on operating member.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Yuhuan Kingjoy Metal Products Co Ltd

Factor:  

WRAS Approval Number  1305035

Print this entry

T-type thermostatic mixing valve with a brushed chromium plated brass body. Temperature is pre-set. Both inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar & maximum operating temperature 85°C.

Size: 15mm Compression inlet

Model: Ozimix Titan TMV3

Marking: Ozimix 3, flow arrow, Titan and DR on body. Titan, Ozimix 3, DR, maximum temperature and product info on cap.

Installation Requirements : R001 R040 R120       

Note:  

Proviso:  

Manufacturer:  

Factor: Titan Valve Alliance Co Ltd

WRAS Approval Number  1201019

Print this entry

Single hole, single outlet thermostatic tap (chromium plated brass) incorporating a non rising spindle headwork`s controlling the flow with dome operating member. Temperature is controlled independently via a thermostatic cartridge with dome operating member incorporating a manual override button. Both inlets incorporate single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 15mm copper tails.

Model: A5668AA – Ceramix Blue water giant bath filler.

Marking: Ideal Standard on operating member, EA W¾ on thermostatic cartridge.

Installation Requirements : R001 R006 R010       

Note:  

Proviso:  

Manufacturer: Ideal Standard

Factor:  

WRAS Approval Number  1301005

Print this entry

T-type thermostatic mixing valve with (chromium plated) brass body. Temperature can be manually adjusted under a fixed cap. Both inlets incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: 4001 models: 15mm compression inlets & outlets and 22mm compression inlets & outlets. 4002 models: ½” male BSP inlets & outlets and ¾” male BSP inlets & outlets.

Model: Yorhe 4001 & 4002.

Marking: Size, CR, flow arrow, company logo and mix on body.

Installation Requirements : R001 R010 R040 R120     

Note:  

Proviso:  

Manufacturer: Yorhe Fluid Intelligent Control Co. Ltd.

Factor:  

WRAS Approval Number  1301004

Print this entry

Range of adjustable or pre-set T type thermostatic blending valve with brushed chromium plated brass bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ½” female BSP inlets/outlets.

Model: 521931 (adjustable) & 521331 (pre-set)

Marking: Both models: Manufacturer's logo, flow arrows, H, C, CR, MIX, hot and cold indicators on bodies. 521931: Manufacturing date under cap. 521331: Hot, Caleffi and date of manufacture (WW/YY) under cap.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Caleffi S.p.A

Factor:  

WRAS Approval Number  1201009

Print this entry

Wall mounted bar type thermostatic shower valve (chromium plated brass) incorporating quarter turn ceramic disc headwork controlling the flow and dome operating member. Temperature is controlled independently via a thermostatic cartridge and dome operating member which incorporates a manual override button. Both inlet connections incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Size: ½” x ¾” offset unions.

Model: ‘CLEASE’- B30023.

Marking: WRAS – CL on body.

Installation Requirements : R001 R010 R040       

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: Xiamen Clease Industries Co. Ltd

Factor:  

WRAS Approval Number  1203341

Print this entry

Wall mounted shower panel incorporating thermostatic mixing valve (chromium plated brass body). The temperature is thermostatically controlled and adjusted. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Size: ½” BSP (F)

Model: Reliance Thermostatic Sequential Shower Panel (PANL 500 210).

Marking: Reliance on operating member

Installation Requirements :             

Note: This approval does not include a shower hose and handset.

Proviso:  

Manufacturer: Les Robinets Presto SA

Factor: Reliance Water Controls Ltd

WRAS Approval Number  1201007

Print this entry

Range of wall mounted exposed bar type thermostatic shower valves (chromium plated brass) incorporating half turn ceramic disc headwork`s controlling both flow and diverts from top shower outlet to lower shower outlet with dome operating member. Temperature is controlled independently via a thermostatic cartridge and dome operating member incorporating a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 55°C.

Size: ¾” x ½” offset unions.

Model: B30234, B30235, B36020 and B36024.

Marking: WRAS – CL on body.

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: Xiamen Clease Industries Co. Ltd

Factor:  

WRAS Approval Number  1301321

Print this entry

Exposed wall mounted thermostatic shower valve (chromium plated brass) incorporating half turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge & the product is supplied with lever operating members. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Size: ½” BSP (M)

Model: 13 161 000 Hansgrohe Ecostat Select

Marking: Hansgrohe on body

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset

Proviso:  

Manufacturer: Hansgrohe SE

Factor:  

WRAS Approval Number  0809074

Print this entry

Range of `T` pattern thermostatic mixing valves incorporating brushed chrome DZR brass body with pre-set temperature under fixed cap. Hot and cold water inlet connection unions incorporate single check valves (DN15) and stainless steel strainers. Maximum supply pressure 10.0 bar.

Size: 15mm & 22mm compression in/outlet connections.

Model: Pro 135176 (15mm) & Pro 135177 (22mm).

Marking: Pro, Mix & CR on body. Pro & technical information on cap.

Installation Requirements : R001 R010         

Note:  

Proviso:  

Manufacturer:  

Factor: Connections (AML) Ltd.

WRAS Approval Number  1301333

Print this entry

Range of wall mounted, concealed, thermostatic blending valves supplied with various backplates and operating members (chromium plated brass). Both inlets incorporate a stainless steel strainer and single check valve cartridges (suitable for backflow protection against Fluid Category 2). Maximum working pressure 8.0 bar & maximum operating temperature 60°C.

Size: ¾” BSP (F)

Model: Diametro Trentacinque: E0BA0146 (with diverter) & E0BA0145 (without diverter). Tetris: P0BA5046 (with diverter) & P0BA5045 (without diverter). Type-Face: M0BA3046 (with diverter) & M0BA3045 (without diverter). Clock Work: N0BA4046T (with diverter) & N0BA4045T (without diverter). LatoperLato: T0BA7046 (with diverter) & T0BA7045 (without diverter). Nastro: U0BA8046 (with diverter) & U0BA8045 (without diverter).

Marking: Ritmonio on backplate

Installation Requirements : R001 R010 R040 R120     

Note:  

Proviso:  

Manufacturer: Rubinetterie Ritmonio SRL

Factor:  

WRAS Approval Number  1301325

Print this entry

Range of wall mounted, exposed and concealed thermostatic shower valves (chromium plated brass) incorporating shut off headwork or single sequential headwork which controls the flow. The temperature is controlled via a thermostatic cartridge. Both inlets incorporate strainers and the products are supplied with shower hose and handset. Maximum working pressure 5.0 bar & maximum supply temperature 45°C.

Size: Exposed models: 15mm pushfit. Concealed models: 15mm compression.

Model: 1.1736.400 Mira Agile SS - eco, 1.1736.401 Mira Agile SS EV, 1.1736.402 Mira Agile EV, 1.1736.403 Mira Agile ERD, 1.1736.404 Mira Agile BIVI, 1.1736.405 Mira Adept BIR, 1.1736.406 Mira Adept BRD, 1.1736.422 Mira Agile EV - eco, 1.1736.423 Mira Adept BIVI - eco, 1.1736.408 Mira Pronta Sense EV, 1.1736.409 Mira Pronta ERD, 1.1736.410 Mira Pronta Store EVI, 1.1736.411 Mira Primi BIR, 1.1736.412 Mira Agile Sense EV+, 1.1736.413 Mira Agile Store EV+, 1.1736.414 Mira Agile Sense ERD+, 1.1736.415 Mira Adept BRD+ & 1.1736.416 Mira Adept BIR+.

Marking: Exposed models: Mira and range name on body. Concealed models: Mira and range name on backplate.

Installation Requirements : R001 R040 R040       

Note:  

Proviso:  

Manufacturer: Kohler Mira Ltd

Factor:  

WRAS Approval Number  1301324

Print this entry

Range of bar type exposed wall mounted thermostatic shower valves (chromium plated brass) incorporating a half turn ceramic disc headwork which controls the flow. The temperature is controlled independently via a thermostatic cartridge & the products are supplied with dome or lever operating members. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Size: ½” x ¾” offset unions

Model: 13 113 000 Hansgrohe Ecostat Comfort HQ, 13 116 000 Hansgrohe Ecostat Comfort & 13 117 000 Hansgrohe Ecostat Comfort Care.

Marking: Hansgrohe on body

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset

Proviso:  

Manufacturer: Hansgrohe SE

Factor:  

WRAS Approval Number  1301323

Print this entry

Range of bar type exposed wall mounted thermostatic bath/shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow and diverting the flow to shower outlet. The temperature is controlled independently via a thermostatic cartridge & the products are supplied with dome or lever operating members. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Size: ½” x ¾” offset unions

Model: 13 112 000 Hansgrohe Ecostat Comfort HQ, 13 114 000 Hansgrohe Ecostat Comfort & 13 115 000 Hansgrohe Ecostat Comfort.

Marking: Hansgrohe on body

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset

Proviso:  

Manufacturer: Hansgrohe SE

Factor:  

WRAS Approval Number  1210312

Print this entry

Concealed thermostatic blending valve (brass) integrated into basin. The inlets are controlled by a normally closed solenoid valve and activated via an infra red sensor. The temperature is thermostatically controlled. Both inlets incorporate single check valves (suitable for backflow protection to fluid category two) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Size: ½” BSP (M) inlets

Model: LW991CH (Line Neorest SE)

Marking: TOTO & Neorest on control box

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: TOTO Japan Ltd

Factor: TOTO Europe GmbH

WRAS Approval Number  1201008

Print this entry

Range of wall mounted exposed bar type thermostatic shower valves (chromium plated brass) incorporating quarter turn ceramic disk headwork`s controlling the flow with dome operating members. Temperature is controlled independently via a thermostatic cartridge and dome operating members incorporating a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 55°C.

Size: ¾” x ½” offset unions.

Model: B30120, B30232, B36022 & B36023.

Marking: WRAS – CL on body.

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: Xiamen Clease Industries Co. Ltd

Factor:  

WRAS Approval Number  1211018

Print this entry

Wall mounted concealed thermostatic blending valve (cast brass body).The temperature is controlled via a thermostatic cartridge and dome operating member (chromium plated plastic) which incorporates a manual override button. The inlet connections incorporate single check valve cartridges (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Size: ½” BSP male inlets/outlets.

Model: 5190-9008.

Marking: DR, FM Mattesson, & 5190-9008 on body.

Installation Requirements : R001 R040 R120       

Note:  

Proviso:  

Manufacturer:  

Factor: Ostnor AB

WRAS Approval Number  1210007

Print this entry

Range of concealed thermostatic blending valves (cast brass bodies) incorporating quarter turn ceramic disc headworks to control the flow and either square or dome operating members. Temperature is controlled independently via a thermostatic cartridge and either square or dome operating members. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 Bar (BSP connections). Maximum operating temperature - 46°C

Size: ¾” BSP Female inlets

Model: KJ8064106 - two handle with square operating members and faceplate. KJ8074117 - two handle with dome operating members and faceplate. KJ8064107 - three handle with square operating members and faceplate. KJ8074119 - three handle with dome operating members and faceplate.

Marking: Kingjoy on operating member. H & C on body

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Yuhuan Kingjoy Metal Products Co Ltd

Factor:  

WRAS Approval Number  1209004

Print this entry

Concealed thermostatic blending valve (cast brass bodies) incorporating quarter turn ceramic disc headwork controlling the flow, and the temperature is controlled via a thermostatic cartridge. The valve is supplied with either round, square, rectangular, oval, oblong, cross top or single lever operating members. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 5 Bar. Maximum operating temperature 80°C

Size: ¾” BSP Female inlets

Model: NUA-148B-3/4-C/P, NOT-148B-3/4-C/P, SOH-148B-3/4-C/P, ORI-148B-3/4-C/P, LIF-148B-3/4-C/P, MIX-148B-3/4-C/P, CEL-148B/SQ-3/4-C/P, CEL-148B/RO-3/4-C/P, TON-348B-3/4-C/P, ELE-248B-3/4-C/P & ELE-348B-3/4-C/P.

Marking: Hot, Cold & flow arrow on body. Vado logo on Faceplate.

Installation Requirements : R001 R010 R040       

Note: This approval does not include a shower hose and handset.

Proviso:  

Manufacturer: Vado

Factor:  

WRAS Approval Number  1305005

Print this entry

Wall mounted thermostatic blending valve (chromium plated brass) incorporating a manual diverter with cube operating member. Temperature is controlled independently via a thermostatic cartridge with cube operating member with manual override button. The spout outlet incorporates a plastic aerator. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: ¾” to ½” offset unions.

Model: MI30010CP - Mio Safe Touch Thermostatic Bath Shower Mixer.

Marking: Intatec, model & date (mm/yy) on body.

Installation Requirements : R001 R020         

Note: This approval does not include a shower hose and handset.

Proviso:  

Manufacturer: Huber Spa

Factor: Intatec Ltd

WRAS Approval Number  1210019

Print this entry

Range of wall mounted, exposed or concealed thermostatic mixing valves with chromium plated or cast brass bodies. Temperature is manually adjustable or can be pre-set under cap. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Size:  

Model: 15mm compression inlets/outlets Rada 215-T3 DK (1.0.407.06.3). Rada 215-T3 C (1.0.440.01.1). Rada 215-T3 OEM (1.1374.008). Rada 215-T3 BC (1.1624.001). ¾” BSP inlet & 15mm compression outlet Rada 215-T3 ZC (1.0.440.03.1).

Marking: Rada 215-T3 DK (1.0.407.06.3 ): Rada Thermoscopic 215-t3 on shroud. Rada 215-T3 C (1.0.440.01.1), Rada 215-T3 OEM (1.1374.008) & Rada 215-T3 ZC (1.0.440.03.1): Rada Thermoscopic 215-t3 on body. Rada 215-T3 BC (1.1624.001): Rada Thermostatic 215-t3 on cover plate and DZ 4278 on body.

Installation Requirements : R001 R010 R040       

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: Kohler Mira Limited

Factor:  

WRAS Approval Number  1303013

Print this entry

Two hole single outlet (fixed) thermostatic blending shower valve (chromium plated brass) incorporating thermostatic cartridge which controls the temperature and non-rising spindle headwork controlling the flow with dome type operating members. The inlets incorporate stainless steel strainers and single check valve cartridges (suitable for protection against fluid category 2). This approval includes shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Size: ¾” male to 15mm push fit

Model: A5985AA - Alto EV.

Marking: Ideal Standard logo on operating member

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Ideal Standard Produktions - GmbH

Factor:  

WRAS Approval Number  1209007

Print this entry

Wall mounted thermostatic blending shower valve (chromium plated brass) incorporating non rising spindle headwork controlling the flow, and the temperature is controlled independently via a thermostatic cartridge. The product is supplied with dome operating members. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2) and a stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Size: ¾” BSP captive nut on valve. 15mm compression on backplate connector.

Model: AQU26206

Marking: `LC` on body.

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: M & Z Spa Rubinetteria

Factor:  

WRAS Approval Number  1302029

Print this entry

Range of wall mounted exposed bar type thermostatic shower control valves (chromium plated brass body) incorporating a non-rising spindle headwork controlling flow with dome operating member. Temperature is controlled independently via a thermostatic cartridge with dome operating member that incorporates a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. The products are supplied with a shower hose and handset. Maximum working pressure 10.0 bar & maximum operating temperature 60°C.

Size: ½” x ¾” offset unions. ½” BSP outlet.

Model: Midas 200 (485903), Midas 100 (485901), Contract 1 Midas 100 (485912) & Contract 2 Midas 200 (485913).

Marking: Midas 200: Aqualisa on body. Midas 100: Aqualisa on body. Contract 1 Midas 100: Aqualisa on body. Aqualisa on shower handset. Contract 2 Midas 200: Aqualisa on body.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer:  

Factor: Aqualisa Products Ltd.

WRAS Approval Number  1209008

Print this entry

Wall mounted thermostatic blending valve (chromium plated brass) incorporating non rising spindle headwork controlling the flow and the temperature is controlled independently via a thermostatic cartridge. The product is supplied with dross top operating members. Both inlets incorporate a single check valve cartridges (suitable for backflow protection against fluid category 2) and a stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Size: ¾” BSP captive nut on valve. 15mm compression on backplate connector.

Model: AQU26207.

Marking: `LC` on body.

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: M & Z Spa Rubinetteria

Factor:  

WRAS Approval Number  1305004

Print this entry

Wall mounted, exposed thermostatic shower control valve (chromium plated brass) incorporating a quarter turn ceramic disk headwork controlling flow with single lever operating member. Temperature is controlled independently via a thermostatic cartridge with dome operating member that incorporates a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Size: ½” x ¾” offset union inlets and ½” shower outlet.

Model: 62072-5101

Marking: KV01315, date of manufacture (YY/MM/WW) on body. BS5412, L, 20 and H on headwork.

Installation Requirements : R001 R040         

Note: This approval does not include hose and handset.

Proviso:  

Manufacturer: Xiamen Lota International Co Ltd

Factor:  

WRAS Approval Number  1305022

Print this entry

Range of bar type exposed wall mounted thermostatic shower valves (chromium plated brass) incorporating a ceramic disc headwork controlling and diverting the flow to either shower outlet. The temperature is controlled independently via a thermostatic cartridge with either dome or cube operating members which incorporates a manual override. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: ½” x ¾” offset unions

Model: 801156 & 801158

Marking: XZ on body

Installation Requirements : R001 R040         

Note: This approval does not include shower hose and handset.

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1212081

Print this entry

Wall mounted thermostatic blending valve (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating manual override button. Maximum working pressure 5.0 bar. Maximum working temperature 80°C.

Size: 15mm male compression.

Model: Caraflo V200.

Marking: Caraflo V200 on body.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer:  

Factor: Carafax Ltd

WRAS Approval Number  1303002

Print this entry

Concealed, wall mounted thermostatic blending shower valve (cast brass body). Temperature is controlled via a thermostatic cartridge & the product also incorporates a 3 position diverter. Both are operated using cross top operating members. Both inlets incorporate stainless steel strainers and single check valves (suitable for backflow protection against Fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: 15mm compression

Model: 803251

Marking: XZ on base plate

Installation Requirements : R001 R020 R120       

Note: This approval does not include hose and handset

Proviso:  

Manufacturer: PPI Xiamen Industry Co Ltd

Factor:  

WRAS Approval Number  1212126

Print this entry

Wall mounted exposed bar type thermostatic shower control valve (chromium plated brass body) incorporating a non-rising spindle headwork controlling flow with dome operating member. Temperature is controlled independently via a thermostatic cartridge with dome operating member that incorporates a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 10.0 bar & maximum operating temperature 60°C.

Size: ¾ x ½" Offset unions and 15mm compression outlet.

Model: Rush Midas 100 (643801) & Rush Midas 100 (644001).

Marking: Aqualisa, date of manufacture (MM/YY) and 6 digit sequential number on body.

Installation Requirements : R001 R010 R040       

Note: This approval does not include hose and handset

Proviso:  

Manufacturer:  

Factor: Aqualisa Products Ltd.

WRAS Approval Number  1209003

Print this entry

Wall mounted, bar type exposed thermostatic shower valve (chromium plated brass) with riser and shower head (chromium plated brass). The valve incorporates a quarter turn ceramic disc headwork and dome operating member controlling the flow. The temperature is controlled independently via a thermostatic cartridge and dome operating member, incorporating a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2) and a stainless steel strainer. The product is supplied with rigid riser and shower head. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Size: ½” - ¾” BSP offset unions.

Model: VEL - 149/RRK - C/P.

Marking: `Vado` on body.

Installation Requirements : R001 R040         

Note:  

Proviso:  

Manufacturer: Vado

Factor:  

WRAS Approval Number  1302012

Print this entry

Wall mounted, two hole single outlet fixed thermostatic combination tap assembly (chromium plated brass) incorporating a single, sequential thermostatic cartridge controlling both flow and temperature with a single lever operating member. The spout outlet incorporates a plastic flow straightener and a removable spout for hygiene purposes. Both inlets incoporate flow restrictors. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Size: ¾” BSP captive nut

Model: H9611

Marking: Delabie on operating member. H on body. Delabie and 96-W on temperature ring.

Installation Requirements : R001 R010 R040       

Note:  

Proviso:  

Manufacturer: Delabie SCS

Factor: Douglas Delabie

WRAS Approval Number  1212003

Print this entry

Bar type exposed wall mounted thermostatic shower valve (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a range of single lever or dome type operating members. The temperature is controlled independently via a thermostatic cartridge and single lever or dome operating members which incorporate a manual override. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and stainless steel strainers. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

Size: ½” x ¾” offset unions

Model: 801101, 801101A, 801101B & 801101C

Marking: BS5412 XZ20 on headwork.

Installation Requirements : R001 R040