Section 2240

Print Entire Section

Valves

Solenoid, plastic

WRAS Approval Number  1212062

Print this entry

`V`, `VAI` & `VQC` ranges of solenoid valves incorporating nylon bodies, EPDM O-rings, NBR diaphragms & plastic strainers at the inlets. Maximum working pressure 10.0 bar. Cold water use only.

Size: V & VAI inlets: ¾”BSP male, ½” BSP male & 3/8” BSP male, V & VAI outlets: 10mm, 13mm spigot, ¾” BSP male, ½” BSP male & 3/8” BSP male. VQC inlets: quick connect 5/16”, ¾”BSP male, ½” BSP male & 3/8” BSP male. VQC outlets: quick connect 5/16” & quick connect ¼”.

Model:  

Marking: Invensys and product info on coil. Model, Siebe, flow arrow, product info and maximum & minimum working pressure on bodies.

Installation Requirements : R001           

Note:  

Proviso: To be installed where light is excluded.

Manufacturer: Invensys Controls

Factor: Eliwell Controls Srl.

WRAS Approval Number  1205048

Print this entry

Range of servo controlled latching or normally closed solenoid valves with PSU body and EPDM `O` rings. For insertion into specifically dimensioned bores. 50.007.805 incorporates a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: 50.007.803 – 46mm50.007.805 – 31mm

Model: 50.007.803 – 46mm50.007.805 – 31mm

Marking: Muller and logo, maximum pressure, model and technical data on coil.

Installation Requirements : R001           

Note:  

Proviso: To be installed where light is excluded.

Manufacturer: AuK Muller GmbH & Co KG

Factor:  

WRAS Approval Number  1203069

Print this entry

Range of latching, non-latching and proportional operated solenoid valves with plastic bodies and EPDM armatures and diaphragms. Some valves have filters at the inlet and optional flow restrictors. Maximum working pressures: EV and PV Ranges – 10.0 bar & LV Range – 7.0 bar. Maximum operating temperature 85°C.

Size: EV109/A ¾”BSP x 10mm SpigotEV118/A ¾”BSP x 10mm Spigot EV118/B 10mm Pushfit x 10mm PushfitEV118/C 3/8” BSP x 3/8” BSPEV118/D 15mm x 15mmEV118/E ¾” BSP x ¾” BSPEV218/A ¾” BSP x Double 10mm SpigotEV209/A ¾” BSP x Double 10mm SpigotPV109/A ¾”BSP x 10mm SpigotPV118/A ¾”BSP x 10mm Spigot PV118/B 10mm Pushfit x 10mm PushfitPV118/C 3/8” BSP x 3/8” BSPPV118/D 15mm x 15mmPV118/E ¾” BSP x ¾” BSPPV218/A ¾” BSP x Double 10mm SpigotPV209/A ¾” BSP x Double 10mm SpigotLV109/A ¾”BSP x 10mm SpigotLV118/A ¾”BSP x 10mm Spigot LV118/B 10mm Pushfit x 10mm PushfitLV118/C 3/8” BSP x 3/8” BSPLV118/D 15mm x 15mmLV118/E ¾” BSP x ¾” BSPLV218/A ¾” BSP x Double 10mm SpigotLV209/A ¾” BSP x Double 10mm Spigot

Model: EV109/A ¾”BSP x 10mm SpigotEV118/A ¾”BSP x 10mm Spigot EV118/B 10mm Pushfit x 10mm PushfitEV118/C 3/8” BSP x 3/8” BSPEV118/D 15mm x 15mmEV118/E ¾” BSP x ¾” BSPEV218/A ¾” BSP x Double 10mm SpigotEV209/A ¾” BSP x Double 10mm SpigotPV109/A ¾”BSP x 10mm SpigotPV118/A ¾”BSP x 10mm Spigot PV118/B 10mm Pushfit x 10mm PushfitPV118/C 3/8” BSP x 3/8” BSPPV118/D 15mm x 15mmPV118/E ¾” BSP x ¾” BSPPV218/A ¾” BSP x Double 10mm SpigotPV209/A ¾” BSP x Double 10mm SpigotLV109/A ¾”BSP x 10mm SpigotLV118/A ¾”BSP x 10mm Spigot LV118/B 10mm Pushfit x 10mm PushfitLV118/C 3/8” BSP x 3/8” BSPLV118/D 15mm x 15mmLV118/E ¾” BSP x ¾” BSPLV218/A ¾” BSP x Double 10mm SpigotLV209/A ¾” BSP x Double 10mm Spigot

Marking: Model, EKI logo/Hydra logo, direction of flow arrow on body. Power supply information on coil.

Installation Requirements :             

Note:  

Proviso: To be installed where light is excluded

Manufacturer: EKI doo

Factor:  

WRAS Approval Number  1203057

Print this entry

Range of solenoid valves with glass reinforced nylon bodies and EPDM `O` rings and diaphragms. BSP connectors are available in brass or plastic. ½” captive nut x 3/8 BSP (plastic) models incorporate stainless steel strainers on inlet/outlets. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Size: 3/8” BSP captive nut x 3/8” BSP male (plastic).½” BSP male x ½BSP male (plastic).½” BSP captive nut x 3/8” BSP male (plastic).3/8” BSP male x 3/8” BSP male (brass).

Model: 50.007.806.

Marking: AuK Muller logo, model and product information on coil cover.

Installation Requirements : R001           

Note:  

Proviso: To be installed where light is excluded.

Manufacturer: AuK Muller GmbH & Co KG

Factor:  

WRAS Approval Number  0904031

Print this entry

Range of solenoid valves with polypropylene bodies and EPDM seats. Maximum working pressure 8.0 bar. Cold water use only.

Size: ¼" BSP female inlet/outlet. 3/8" BSP female inlet/outlet.

Model: WRA1, WRA2, WRA3, WRA4, WRB1, WRB2, WRB3, WRB4.

Marking: ITT, model and product information printed on adhesive label on body. ‘IN’ stamped into body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: American Industries

Factor: Alcon Solenoid Valves

WRAS Approval Number  0909800

Print this entry

`Aquastop` normally closed solenoid valve (Polamide or Noryl bodies) having EPDM diaphragms. For use in dish washers or washing machines to ensure any leakage from the inlet hose is discharged into the appliance. Maximum working pressure 10 bar

Size: ½" BSP (M)

Model: Aquastop 13.007.226

Marking: Label on solenoid housing showing model number and volts

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: AuK Muller GmbH & Co KG

Factor:  

WRAS Approval Number  0912048

Print this entry

Range of sanitary valves incorporating a solenoid valve for installation into a tap body. Maximum working pressure 8 bar - 19.007287, 51.007.125, 050 (B05). 10 bar - 50.007.800.

Size: 50.007.800 + 050 (B05) Manifold connection specifically dimensioned 51.007.125, 19.007.287 ½" BSP inlet, 8mm pushfit outlet.

Model: 19.007.287, 51.007.125, 50.007.800, 50.005 (B05).

Marking:  AuK Muller, model number and product information printed on adhesive label on body.

Installation Requirements : R001           

Note: To be installed where light is excluded.

Proviso:  

Manufacturer: AuK Muller GmbH & Co KG

Factor:  

WRAS Approval Number  0809021

Print this entry

Range of solenoid valves with a plastic body and PTFE seat. Maximum working pressure 60mbar @ 90°C.

Size: 8mm, 12mm, 16mm, 18mm spigot connections. 6mm & 8mm pushfit connections.

Model: 46.006, 46.008, 40.006, 40.008, 40.012, 40.014, 47.000.

Marking: A.u.K Muller, model number and technical data printed on adhesive label on body.

Installation Requirements :             

Note:  

Proviso: To be installed where light is excluded.

Manufacturer: AuK Muller GmbH & Co KG

Factor:  

WRAS Approval Number  0909033

Print this entry

Servo controlled solenoid valve with Hostaform body and cover and EPDM O-rings. Inlet incorporates a stainless steel strainer. Maximum working pressure 8.0 bar @ 70°C.

Size: Manifold connection specifically designed to fit AuK Muller solenoid valves.

Model: 50/050.

Marking: AuK Muller, model number and product information printed on adhesive label on body.

Installation Requirements : r001           

Note:  

Proviso:  

Manufacturer: AuK Muller GmbH & Co KG

Factor:  

WRAS Approval Number  1009365

Print this entry

Normally closed solenoid valve with a plastic body, and elastomeric diaphragm and `O` ring. Maximum working pressure 10.0 bar & maximum operating temperature 85°C

Size: ½" Male

Model: 50.010.100

Marking: AuK Muller, model and product information on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso: To be installed where light is excluded.

Manufacturer: AuK Muller GmbH & Co KG

Factor:  

WRAS Approval Number  1106030

Print this entry

Solenoid valve with nylon body EPDM seals, `O` rings and diaphragm with a stainless steel filter on the inlet. The valve can be supplied with or without a brass adaptor for use in specifically dimensioned assemblies. Maximum working pressure 10.0 bar & maximum operating temperature 70°C.

Size: ½” BSP male (when supplied without brass adaptor). 8mm pushfit (when supplied with brass adaptor).

Model: 50.005.100.

Marking: Solenoid only: AuK Muller, model number, size and product information on body. Solenoid with brass adaptor: Grohe, voltage and serial number on coil.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: AuK Muller GmbH & Co KG

Factor:  

WRAS Approval Number  1012347

Print this entry

Normally closed solenoid valve having nylon Body, EPDM diaphragm and `O`ring. Maximum working pressure 10.0 bar & maximum working temperature 85°C

Size: 8 mm push fit connection inlet x two 8 mm push fit outlet connections.

Model: 06.003.23406.003.12406.003.114

Marking: AuK Muller and product information on adhesive label.

Installation Requirements : R001           

Note:  

Proviso: For installations where light is excluded.

Manufacturer: AuK Muller GmbH & Co KG

Factor:  

WRAS Approval Number  0809057

Print this entry

Range of normally closed solenoid valves with nylon bodies, EPDM seals and membrane. Model 1.010.115 incorporates a stainless steel strainer on inlet. Model 1.010.126 incorporates a POM strainer on the inlet. Maximum working pressure 10.0 bar & maximum operating temperature 90°C.

Size: ½” BSP male inlet/outlet.¾” BSP male inlet/outlet.

Model: 01.010.115 - ½” male BSP. 01.010.126 - ¾” male BSP. 01.007.111 - ¾" BSP male. 01.007.126 - ¾" BSP male. 01.010.115 - ¾" BSP male. 01.010.125 - ¾" BSP male. 01.010.126 - ¾" BSP male. 01.010.215 - ¾" BSP male. 01.010.225 - ¾" BSP male. 01.010.315 - ¾" BSP male. 01.010.325 - ¾" BSP male. 01.010.415 - ¾" BSP male. 01.010.425 - ¾" BSP male. 29.007.215 - ¾" BSP male. 29.010.225 - ¾" BSP male. 01.013.115 - ¾" BSP male. 01.013.126 - ¾" BSP male. 01.013.215 - ¾" BSP male. 01.013.225 - ¾" BSP male. 01.017.126 - ¾" BSP male. 01.021.126 - 1" BSP male. 15.017.325 - ¾" BSP male. 15.017.425 - ¾" BSP male. 44.007.126 - ¾" BSP male.

Marking: Pressure, model number, direction of flow arrow and logo on body.AuK Muller, maximum temperature and technical information on coil.

Installation Requirements : R001           

Note:  

Proviso: Must be installed where light is excluded.

Manufacturer: AuK Muller GmbH & Co KG

Factor:  

WRAS Approval Number  1007318

Print this entry

Normally closed solenoid valve having Noryl Body, EPDM diaphragm and `O-ring. Maximum working pressure 10.0 bar.

Size: ¾" BSP Inlet / Outlet connections.

Model: DFV – DFV Solenoid Pilot Diaphragm Valve.

Marking: Norgren, product code, electrical ratings printed on adhesive label on body of valve.

Installation Requirements : R001           

Note:  

Proviso:  To be installed where light is excluded.

Manufacturer: Cistermiser Ltd

Factor:  

WRAS Approval Number  1210034

Print this entry

Normally closed solenoid valve with a plastic body, EPDM `O` rings and diaphragm & stainless steel filter on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size: ¾” BSP inlet, 20mm spigot outlet.

Model: EV220T 14P.

Marking: Danfoss and flow arrow on body. Danfoss and technical information on coil.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Danfoss Kolding.

Factor: Danfoss A/S

WRAS Approval Number  1109028

Print this entry

Solenoid valve with nylon body, EPDM diaphragm and an acetal filter/regulator at the inlet. Maximum working pressures 10.0 bar. Maximum operating temperature 60°C.

Size: ¾” BSP male inlet, 10mm spigot outlets.

Model: `Delta` Type 218.

Marking: Delta logo, model, direction of flow arrow and product information on body.Product information on coil cover.

Installation Requirements : R001 R150         

Note:  

Proviso: To be installed where light is excluded.

Manufacturer: Delta Electronics (Thailand) Public Company Ltd

Factor:  

WRAS Approval Number  0807024

Print this entry

Plastic solenoid valves with EPDM seals. Available in 120v AC and 24v DC versions. Maximum working pressure 0.06 bar.

Size: 10mm spigot inlet.

Model: DSVP15N.

Marking: Deltrol Controls, voltage, model number and technical details printed onto an adhesive label on actuator casing.

Installation Requirements : R001           

Note:  

Proviso: To be fitted where light is excluded.

Manufacturer: Deltrol Controls

Factor:  

WRAS Approval Number  1109034

Print this entry

Range of solenoid valves with plastic bodies and EPDM diaphragms, incorporating plastic strainers on inlets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Size:  

Model: Model Size 319 ¾” BSP male x 12 mm spigot 319.7 ¾” BSP male x 10 mm spigot 329 ¾” BSP male x 12 mm spigot 329.7 ¾” BSP male x 10 mm spigot 329.9 ¾” BSP male x 10 mm spigot 339 ¾” BSP male x 12 mm spigots 349 ¾” BSP male x 10 mm spigots 359 ¾” BSP male x 12 mm spigots 369 ¾” BSP male x 12 mm spigots 389.7 ¾” BSP male x 10 mm spigots

Marking: Model number, product information, direction of flow arrow on body Model number on coil sleeve.

Installation Requirements : R001           

Note:  

Proviso: To be installed where light is excluded.

Manufacturer: Bitron Industrial China Co Ltd.

Factor: Elbi International Spa

WRAS Approval Number  1011028

Print this entry

Solenoid valve, normally closed type, with plastic body, filter & flow restrictor and an EPDM diaphragm. Maximum working pressure 10.0 bar & maximum operating temperature 90°C.

Size: ¾” BSP male inlet / 10mm spigot outlet.

Model: 10.1511.70

Marking: Eltek, temperature and pressure rating, direction of flow arrow and product information on body. Eltek and product information on coil housing.

Installation Requirements : R001           

Note:  

Proviso: To be installed where light is excluded.

Manufacturer: Eltek Spa

Factor:  

WRAS Approval Number  0909307

Print this entry

Floodcheck latching solenoid valve with Nylon body and Ethylene Propylene diaphragm and seal. For installations where light is excluded. Maximum working pressure 10 bar,cold water use only.

Size: ¾” BSP (M)

Model: Floodcheck Solenoid Valve FC02

Marking: Label on body printed with Floodcheck, Date of Manufacture, Batch number, maximum working pressure and voltage.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Floodcheck

Factor:  

WRAS Approval Number  1107072

Print this entry

Normally closed solenoid valve with a plastic body, EPDM diaphragm and plastic strainer and flow restrictor at the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Size: ¾” BSP male inlet x 15mm spigot outlet.

Model: 1180.

Marking: Interelektrik and product information on coil.Pressure rating, model number, direction of flow arrow and technical information on body.

Installation Requirements : R001           

Note:  

Proviso: To be installed where light is excluded.

Manufacturer: Interelektrik GmbH & CO KG

Factor:  

WRAS Approval Number  1109032

Print this entry

Normally closed solenoid valve with nylon body, NBR seals and diaphragm and a POM filter at the inlet. Maximum working pressure 10.0 bar. For cold water use only.

Size: ¾” BSP male x 12mm spigots.

Model: `Invensys` HD1015 & HD2860 Model Added November 2012: `Invensys` HD1016

Marking: Model code and product information on coil cover. Direction of flow arrow and product information on body.

Installation Requirements : R001           

Note:  

Proviso: To be installed where light is excluded.

Manufacturer: Invensys (Qingdao) Controls Co Ltd

Factor:  

WRAS Approval Number  1106024

Print this entry

Range of normally closed, latching type solenoid valves with polypropylene bodies, EPDM diaphragms and seats and nickel plated brass inlets and outlets. Maximum working pressure 8.0 bar at 85°C.

Size:  

Model: 6833L, 6918L, 6877L (available in the following variations): PLV0001 - Compression 15mm - 6VDC Latch 2 way, PLV0002 - Compression 22mm - 6VDC Latch 2 way, PLV0003 - Push-fit 15mm - 6VDC Latch 2 way, PLV0004 - Compression 15mm - 24VDC Latch 2 way, PLV0005 - Compression 22mm - 24VDC Latch 2 way, PLV0006 - Push-fit 15mm - 24VDC Latch 2 way, PLV0007 - Compression 15mm - 6VDC Latch 2 way, PLV0008 - Compression 22mm - 6VDC Latch 2 way, PLV0009 - Push-fit 15mm - 6VDC Latch 2 way, PLV0010 - Compression 15mm - 24VDC Latch 2 way, PLV0011 - Compression 22mm - 24VDC Latch 2 way, PLV0012 - Push-fit 15mm - 24VDC Latch 2 way, PSV0001 - Compression 15mm - 6VDC On/Off 2 way, PSV0002 - Compression 22mm 6VDC On/Off 2 way, PSV0003 - Push-fit 15mm - 6VDC On/Off 2 way, PSV0004 - Compression 15mm - 24VDC On/Off 2 way, PSV0005 - Compression 22mm - 24VDC On/Off 2 way, PSV0006 - Push-fit - 24VDC On/Off 2 way, PSV0007 - Compression 15mm - 100v50Hz On/Off 2 way, PSV0008 - Compression 22mm - 100v50Hz On/Off 2 way, PSV0009 - Push-fit 15mm - 100v50Hz On/Off 2 way, PSV0010 - Compression 15mm - 230v50Hz On/Off 2 way, PSV0011 - Compression 22mm -230v50Hz On/Off 2 way, PSV0012 - Push-fit 15mm - 230v50Hz On/Off 2 way, PSV0013 - Compression 15mm - 6VDC On/Off 2 way, PSV0014 - Compression 22mm - 6VDC On/Off 2 way, PSV0015 - Push-fit 15mm - 6VDC On/Off 2 way, PSV0016 - Compression 15mm - 24VDC On/Off 2 way, PSV0017 - Compression 22mm - 24VDC ON/Off 2 way, PSV0018 - Push-fit 15mm - 24VDC On/Off 2 way, PSV0019 - Compression 15mm - 110w50Hz On/Off 2 way, PSV0020 - Compression 22mm - 110w50Hz On/Off 2 way, PSV0021 - Push-fit 15mm - 110w50Hz On/Off 2 way, PSV0022 - Compression 15mm - 230w50Hz On/Off, PSV0023 - Compression 22mm - 230w50Hz On/Off & PSV0024 - Push-fit 15mm - 230w50Hz On/Off

Marking: Direction of flow on body, Alcon ITT Flow Centre and technical information on cap over coil housing.

Installation Requirements : R001           

Note: To be installed where light is excluded.

Proviso:  

Manufacturer: Xylem Flow Control Limited

Factor:  

WRAS Approval Number  0904030

Print this entry

Range of solenoid valves with polypropylene bodies and EPDM seats. Maximum working pressure 8.0 bar. Cold water use only.

Size: 3/8", ½" & ¾" BSP female inlet/outlet.

Model: WRC1, WRC2, WRC3, WRC4, WRD1, WRD2, WRD3, WRD4, WRE1, WRE2, WRE3, WRE4.

Marking: In and out moulded onto body. Company logo and voltage printed on adhesive label.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: ITT Flow Control

WRAS Approval Number  0810011

Print this entry

Range of normally closed solenoid valves (single inlet, dual outlet) with a Delrin body and EPDM `O` rings. For cold water use only. Maximum working pressure 8.27 bar.

Size: 6mm pushfit inlet and 6mm & 8mm pushfit outlets.

Model: SRW-DV06A-B02 & SRW-DV06A-B04.

Marking: Model number and product information printed onto housing. `Solen` and product information moulded onto body of valve.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Solen Electric (Vietnam) Co Ltd

Factor: Solen Electric Co. Ltd

WRAS Approval Number  1109379

Print this entry

Solenoid valve single inlet with strainer and double outlet, nylon body and EPDM O rings and diaphragm. Maximum working pressure 10.0 bar. For cold water use only.

Size: ¾” BSP (M) inlet, hose connection on outlet

Model: STC-WVDB06B-0005

Marking: Solen Taiwan on bracket.

Installation Requirements : R001           

Note:  

Proviso: To be installed where light is excluded.

Manufacturer: Solen Electric (Vietnam) Co Ltd

Factor: Solen Electric Co. Ltd

WRAS Approval Number  0912061

Print this entry

`E-88` range of normally closed solenoid valves with Zytel or Nilamid bodies and EPDM diaphragms. Inlets and outlets incorporate plastic flow restrictors. Maximum working pressure 10.0 bar @ 85°C.

Size: ¾" BSP inlets, spigot connection outlets.

Model: ES 90/88, 1 ES-L, ESL 90/88-M, ES 180/88, ED 90/88, ED180/88, EDL 90/88-M, ET 90/88, ET 180/88, ETL 90/88-M,EM 180/88.

Marking: T & P logo, model number, direction of flow arrow and product information moulded onto body. T & P logo and ENEC stamped into metal coil frame, and product information moulded onto coil.

Installation Requirements : R001           

Note: To be installed where light is excluded.

Proviso:  

Manufacturer: T & P Sp Polska Zoo

Factor: T & P SpA

WRAS Approval Number  0902319

Print this entry

FPD-180F in-line solenoid valve of the normally closed type with nylon body and EPDM seal. Maximum working pressure 10.0 bar at 90°C.

Size: 24mm (clamp) x 16mm connection.

Model: FPD-180F.

Marking: Label on body with CNKB, model number, volts, minimum and maximum operating temperatures and maximum operating pressure.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Triton Showers

WRAS Approval Number  0902318

Print this entry

`RIV-23A` solenoid valve assembly consisting of two separate valves connected by a bracket, with two inlets and three outlets. The valves have polypropylene bodies and an EPDM diaphragm. For cold water use only. Maximum working pressure 8.27 bar.

Size: 6mm pushfit inlets x 6mm & 8mm outlet connections.

Model: RIV-23A.

Marking: Body embossed ` USEONG` and logo and maximum operating temperature.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Yantai Useong Electro-Mechanics

Factor: Useong Electro-Mechanics Co. Ltd.