Section 2250

Print Entire Section

Valves

Swing gate

WRAS Approval Number  1201060

Print this entry

AVK series 41 range of swing gate valves with epoxy coated ductile iron bodies and metal to metal seal. For vertical and horizontal installation. Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.

Size: DN350, DN400, DN450, DN500 & DN600.

Model: AVK Series 41.

Marking: AVK, size, PN rating, direction of flow arrow and product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: AVK Valves (Anhui) Co. Ltd

Factor:  

WRAS Approval Number  0809030

Print this entry

Range of swing non-return valves with cast and ductile iron bodies with a blue epoxy coating and ductile iron doors, with a metal to metal seal (copper alloy). For vertical and horizontal installation and can be supplied with or without a counter balance. Maximum working pressure 16.0 bar.

Size: DN50 - DN400.

Model: Figure 2200.

Marking: `Aquaflow`, size, pressure rating, direction of flow arrow and BS5153 cast onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Aquaflow Valves (a division of T-T Pumps Limited)

Factor:  

WRAS Approval Number  1105045

Print this entry

Range of swing non-return valves with bronze bodies and EPDM `O`rings. The valves incorporate `EZ Press` crimp connection ends and are suitable for use with copper tubing. Maximum working pressure 16.0 bar & maximum operating temperature 99°C.

Size: 15mm, 22mm, 28mm, 35mm, 42mm and 54mm EZ press crimp inlet/outlet.

Model: 250.

Marking: VIR logo, Italy, size, `200 WOG` & RWV on bodies.

Installation Requirements : R001           

Note: Not suitable for backflow prevention.

Proviso:  

Manufacturer: VIR Valvoindustria Ing Rizzio SPA

Factor: