Section 2290

Print Entire Section

Valves

Stop, gate, metal

WRAS Approval Number  0907113

Print this entry

Range of resilient seated gate valves with ductile iron bodies and bonnets, blue epoxy coating and a ductile iron wedge encapsulated in EPDM. Valve is operated via a non-rising spindle headwork. Maximum working pressure 16.0 bar. Cold water use only.

Size: DN50 - DN600.

Model: Gaer

Marking: GAER, PN, size & GGG50 on body. Operating temperature on data plate.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Hidroglobal Tecnologia del Agua S.A.

WRAS Approval Number  0907116

Print this entry

Range of resilient seated gate valves with ductile iron bodies and bonnets, blue epoxy coating and a ductile iron wedge encapsulated in EPDM. Valve is operated via a non-rising spindle headwork. Maximum working pressure 16.0 bar. Cold water use only.

Size: DN50 - DN600.

Model: 292 WS.

Marking: ECON, PN & size on body. Econosto, model RES gate valve & WRAS Approved Product on data plate.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Econosto International B.V.

WRAS Approval Number  1305049

Print this entry

`AVK and GVL Series 21` range of resilient seated gate valves with blue epoxy coated ductile iron bodies, bonnet and gland flange, and a ductile iron gate/wedge which is fully encapsulated with EPDM. Maximum working pressure 16.0 bar. Cold water use only.

Size: DN 50, 80, 100, 150, 200, 250, 300, 350 & 400mm.

Model: AVK and GVL Series 21.

Marking: `AVK` size, pressure rating and product information cast onto body. DN 400 AVK and product information printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Aqua-Gas Manufacturing Ltd

Factor:  

WRAS Approval Number  1003341

Print this entry

Range of resilient seated gate valves with ductile iron bodies and bonnets (blue epoxy powder coated) with a ductile iron wedge encapsulated in EPDM using stainless steel stems and EPDM `O` rings. Maximum working pressure 16.0 bar at 85°C.

Size: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500 & DN600.

Model: `Sigma` resilient seat gate valves.

Marking: Sigma logo (?), BS5163, year of manufacture, PN, DN & DI on valve body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Sigma Commercial Products Ltd

WRAS Approval Number  1212089

Print this entry

Range of gate valve with ductile iron bodies, blue epoxy powder coating and EPDM encapsulated, ductile iron wedges. The valves are operated via a non-rising spindle headwork with a hand wheel operating member. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Size: DN50 Flanged & DN100 flanged.

Model: ZJ Range

Marking: TE, ZJ, GT500 and size on valve body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Jiangsu Zuzem Valves Co Ltd

Factor:  

WRAS Approval Number  1009077

Print this entry

Range of gate valves with ductile iron bodies, blue coloured epoxy powder coating and ductile iron wedges encapsulated in EPDM. The valves are operated via a non-rising spindle headwork with a hand wheel operating member. For use above and below ground. Maximum working pressure 16.0 bar & maximum operating temperature 85°C.

Size: DN50 - DN500.

Model: DN50Z45X, DN65Z45X, DN80Z45X, DN100Z45X, DN125Z45X, DN150Z45X, DN200Z45X, DN250Z45X, DN300Z45X, DN350Z45X, DN400Z45X, DN450Z45X, DN500Z45X.

Marking: Size, pressure rating, product information and EEE on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Eayuan Metal Industrial Co., Ltd

WRAS Approval Number  1203355

Print this entry

IRN R001 Range of resilient seated gate valves with cast iron bodies and bonnets with an epoxy blue coating and a cast iron wedge encapsulated in NBR. Valve is operated via a non- rising spindle headwork. Maximum working pressure 10.0 bar (PN10) and 16.0 Bar (PN16). Maximum working temperature 80°C

Size: DN50 to DN1200

Model: Z45X (DN50-DN600 PN16 & DN700-DN1200 PN10)

Marking: Manufacturer’s logo, PN and DN on valve body.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Shanghai Biao Yi Valve Co. Ltd.

Factor:  

WRAS Approval Number  1212135

Print this entry

Range of ductile iron gate valves with blue epoxy coated bodies and an iron wedge encapsulated in EPDM. Valve is operated via non rising spindle headwork. Maximum working pressure 16 Bar. Cold water use only

Size: DN 40, DN 50, DN 65, DN 80, DN 100, DN 125, DN 150, DN 200, DN 250, DN 300, DN 350.

Model: `292WRAS` range.

Marking: GGG40, ECON, size & pressure rating on body. Q200 and open & close on handwheel.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Econosto International B.V.

WRAS Approval Number  1112068

Print this entry

`EKOplus` range of cast iron gate valves with blue epoxy coated body and an iron wedge encapsulated in EPDM. Valve is operated via non rising spindle headwork. Maximum working pressure 16.0. Cold water use only.

Size: DN50, DN100, DN150, DN200, DN250 & DN300.

Model: EKOplus range.

Marking: VAG, size, pressure rating and product information on body and on adhesive label.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Jihomoravska Armaturka spolsro

Factor: VAG Armaturen GmbH

WRAS Approval Number  1201320

Print this entry

Range of gate valves with brass bodies and brass wedges. The valves are operated via a non-rising spindle headwork with a hand wheel operating member. For above ground use only. Maximum working pressure 16.0 bar & maximum operating temperature 99°C.

Size: 15mm, 22mm, 28mm, 3/8”, ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”,

Model: Metric: R220Y002, R220Y005 & R220Y006. Imperial: R55ZY002, R55ZY003, R55ZY004, R55ZY005, R55ZY006, R55ZY007 & R55ZY008.

Marking: Giacomini logo, size of inlet & PN16 on body (imperial models only).

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Giacomini SpA

Factor:  

WRAS Approval Number  1210058

Print this entry

Range of gate valves with ductile iron bodies (blue epoxy coating) EPDM coated resilient trim wedges and EPDM `O` rings. The valves are operated via a non-rising spindle. For above ground use only. Maximum working pressure 16.0 Bar. Maximum operating temperature 50°C.

Size: DN450, DN500 & DN600

Model: Series 55 DN450, DN500 & DN600.

Marking: 'AVK', Size, casting date, flange type, maximum working pressure on body. Product data and serial number on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: AVK Valves Manufacturing Malaysia SDN BHD

WRAS Approval Number  1205350

Print this entry

Gate valve with brass body & wedge and PTFE washers. Maximum working pressure 30.0. Maximum operating temperature 85°C.

Size: 15mm, 22mm & 28mm.

Model: H-01201-1/2-00. H-01201-3/4-00. H-01201-1-00.

Marking: Manufacturer’s logo and HVL on body

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Zhejiang Valogin Technology Co. Ltd.

Factor:  

WRAS Approval Number  1304311

Print this entry

Range of gate valves with ductile iron bodies. The valves are operated via a non-rising spindle headwork with a hand wheel operating member. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Size: DN50-DN500

Model: Z45X-16Q

Marking: DN500 only = DN, PN, GGG50, WRAS on body DN50-450 = DN, PN, GGG50, WRAS & company logo on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Tongling Tianhai Flow Control Co., Ltd.

Factor:  

WRAS Approval Number  1212333

Print this entry

Range of gate valves with ductile iron bodies (blue epoxy powder coating) and a ductile iron wedge with an EPDM coating and `O` rings. The valves are operated via a non-rising spindle headwork. Maximum working pressure 16.0 bar. Cold water use only.

Size: DN50 - 300

Model: DN 50 - 30Z0507849 DN 80 - 30Z0807851 DN 100 - 30Z1007852 DN 150 - 30Z1507854 DN 200 PN10 - 30Z2007855 DN 200 PN16 - 30Z2007856 DN 250 PN10 - 20Z2507857 DN 250 PN16 - 20Z2507858 DN 300 PN10 - 20Z3007859 DN 300 PN16 - 20Z3007860

Marking: DN size on body. Technical information, size and Erhard valves limited on adhesive label

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Belgicast Internacional, S.L.

Factor: Belgicast (Talis Spain)

WRAS Approval Number  0907118

Print this entry

Range of resilient seated gate valves with ductile iron bodies and bonnets, blue epoxy coating and a ductile iron wedge encapsulated in EPDM. Valve is operated via a non-rising spindle headwork. Maximum working pressure 16.0 bar. Cold water use only.

Size: DN50 - DN600.

Model: Fig.105.

Marking: Rapidrop, PN & DN on body. Rapidrop, model, NRS RES & BS5163 on dataplate.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Rapidrop Global Limited

WRAS Approval Number  1303330

Print this entry

Range of ductile iron gate valves with EPDM seals. Maximum working pressure 10.0 bar. Maximum operating temperature 85OC.

Size: DN50 - DN700

Model: Z45X-10-00 (DN50-DN700)

Marking: SIND, PN, DN and manufacturer's logo on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Tongling SIND Valves Head Factory

Factor:  

WRAS Approval Number  1212114

Print this entry

Range of ductile Iron gate valves with blue epoxy coated bodies and EPDM wedge. The valve operates via a non-rising spindle head works with a hand wheel operating member. Maximum working pressure 16 bar. Maximum working temperature 80°C.

Size: DN 40, DN 50, DN 65, DN 80, DN 100, DN 125, DN 150, DN 200, DN 250 & DN 300.

Model: RA1 range of gate valves

Marking: DN, PN, Company logo and product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Dalian Reliable Metal Co Ltd

Factor:  

WRAS Approval Number  1212105

Print this entry

DVD-ESV Range of ductile iron gate valves with blue epoxy coated bodies and an iron wedge encapsulated in EPDM. Valve is operated via non rising spindle headwork. Maximum working pressure 16 Bar. Cold water use only

Size: DN 40, DN 50, DN 65, DN 80, DN 100, DN 125, DN 150, DN 200, DN 250, DN 300, DN 350.

Model: DVD-ESV Gate Valves

Marking: DVD & size on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Dogus Vana VE Dokun Sanayi Ticaret A.S

Factor:  

WRAS Approval Number  1305318

Print this entry

Range of gate valves with ductile iron bodies (blue epoxy coating), EPDM coated resilient trim wedges and EPDM `O` rings. The valves are operated via a non-rising spindle. For above ground use only. Maximum working pressures 10.0, 16.0 and 25.0 bar. Cold water use only.

Size: DN50-400: PN10, PN16 & PN25. DN450-600: PN10 & PN16.

Model: RVHX, RVCX, RRHX

Marking: Karon Valves logo, PN and DN on Body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Shanghai Karon Valves Machinery Co., Ltd.

Factor:  

WRAS Approval Number  1212085

Print this entry

Range of gate valves with ductile iron bodies with internal and external epoxy coating (blue coloured) and resilient ductile iron wedges coated in EPDM. The valve incorporates a non-rising stem. Maximum working pressure 16.0 Bar. Maximum operating temperature 60°C.

Size: DN50, 65, 80, 100, 150, 200, 250, 300, 350 & 400

Model: AVK Series 21

Marking: Size, AVK and technical information on adhesive label on body. AVK, size, pressure rating & GGG/SG on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: AVK Valves (Anhui) Co. Ltd

Factor:  

WRAS Approval Number  1206066

Print this entry

`VOLON` Range of ductile iron gate valves with blue epoxy coated bodies incorporating a ductile iron wedge encapsulated in EPDM. The valves are operated via a non-rising spindle headwork and a cap and hand wheel operating member. For above ground use only. Maximum working pressure 16 bar. Maximum operating temperature 80°C.

Size: DN50 – DN300

Model: ‘VOLON’ range

Marking: VOLON, BS5163, PN, DN & SG on body.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Weifang Yuchuan Machinery Co,. Ltd.

Factor:  

WRAS Approval Number  1212332

Print this entry

Range of gate valves with ductile iron bodies, green coloured epoxy powder coating and ductile iron wedges encapsulated in EPDM. The valves are operated via a non-rising spindle headwork with a hand wheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Size: DN50 - DN700

Model: Z45X-16Q (DN50-DN700)

Marking: Manufacturer's logo, DN and PN on body. Manufacturer's name and tech info on body and handwheel.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Shanghai Zhengfeng Valve MFG Co Ltd

Factor:  

WRAS Approval Number  1209051

Print this entry

Range of bi-directional resilient seated gate valves with blue epoxy coated ductile iron bodies, bonnets and gland housings and EPDM encapsulated wedges. The valves incorporate stainless steel stems operated via a non-rising spindle headwork. Maximum working pressure 16.0 bar. Cold water use only

Size: DN350, DN400, DN450, DN500, DN600

Model: RSGV

Marking: UV logo and product information on data plate. SUFA, size, PN rating and product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Innovative Pipesystems Ltd

WRAS Approval Number  1209345

Print this entry

Range of gate valves with ductile iron bodies and EPDM encapsulated wedge with blue epoxy coating. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Size: DN50 - DN 800

Model: GZ45X

Marking: Body cast PN, DN, WRAS, GVP and GGG50.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Anhui Fangxing Industrial Co. Ltd.

Factor:  

WRAS Approval Number  1107358

Print this entry

Range of gate valves with ductile iron bodies with epoxy powder blue coating and EPDM coated resilient wedges. The valves are operated via a non-rising spindle headwork. Valves are available with maximum working pressure 16.0 bar. For use with cold water only.

Size: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500 and DN600

Model: GB -0050 GB -0065 GB -0080 GB -0100 GB -0125 GB -0150 GB -0200 GB -0250 GB -0300 GB -0350 GB -0400 GB -0450 GB -0500 GB -0600

Marking: Manufacturers logo (DVPL), Size, Year of manufacture e.g. '2012', 'GGG50/DI' and PN on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Durga Valves Private Ltd

WRAS Approval Number  1206076

Print this entry

Range of gate valves with bronze bodies and bronze wedges. The valves operate via non-rising spindle head work with lock shield or hand wheel operating members. Maximum working pressure 20.0 bar. Maximum operating temperature 99°C.

Size: ½” - 3” hand wheel, ½” - 2” lockshield.

Model: HV 5520 gate valve and HV 5520LS lock shiel valves.

Marking: HV 5520: 1, PN20,150 S & 300WOG on body. Model name number on label on operating member. HV 5520LS: 1, PN20,150 S & 300WOG on body. Model name number on data plate on operating member.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Herz Valves UK Ltd

WRAS Approval Number  1009062

Print this entry

Range of gate valves with ductile iron bodies, blue coloured epoxy powder coating and ductile iron wedges encapsulated in EPDM. The valves are operated via a non-rising spindle headwork with a hand wheel operating member. For use above and below ground. Maximum working pressure 16.0 bar & maximum operating temperature 85°C.

Size: DN50 – DN500.

Model: DN50Z45X, DN65Z45X, DN80Z45X, DN100Z45X, DN125Z45X, DN150Z45X, DN200Z45X, DN250Z45X, DN300Z45X, DN350Z45X, DN400Z45X, DN450Z45X & DN500Z45X.

Marking: Size, pressure rating, product information and EEE on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Anhui Redstar Valve Co Ltd

Factor:  

WRAS Approval Number  1007327

Print this entry

Range of gate valves with ductile iron bodies with internal and external epoxy powder blue coating and ductile iron EPDM coated resilient wedges. The valve incorporates a non-rising stem with a hand wheel operating member. Maximum working pressure 16.0 bar.

Size: DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500 & DN600.

Model: Model Size 40Z45X-16 DN40 50Z50X-16 DN50 65Z45X-16 DN65 80Z45X-16 DN80 100Z45X-16 DN100 125Z45X-16 DN125 150Z45X-16 DN150 200Z45X-16 DN200 250Z45X-16 DN250 300Z45X-16 DN300 350Z45X-16 DN350 400Z45X-16 DN400 450Z45X-16 DN450 500Z45X-16 DN500 600Z45X-16 DN600

Marking: CVC, BS5163, DN, PN and DI cast onto valve body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Anhui Streamwell Valve Co Ltd

Factor:  

WRAS Approval Number  0909046

Print this entry

`Figure 3000` range of wedge gate valves with blue epoxy coated ductile iron bodies and PTFE gasket. The valve incorporates a ductile iron wedge and stainless steel stem and is operated via a non-rising spindle headwork via an operating wheel. Maximum working pressure 16.0 bar.

Size: DN50, DN80, DN100 and DN150.

Model: Figure 3000.

Marking: Aquaflow, BS 5163, size, pressure rating and SGCF cast onto body. Aquaflow cast onto operating wheel.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Aquaflow Valves (a division of T-T Pumps Limited)

Factor:  

WRAS Approval Number  0902095

Print this entry

`Series 55/30` and `Series 55/35` ranges of gate valves with ductile iron bodies and bonnets and a blue epoxy resin coating. The wedge is also ductile iron which is fully encapsulated by EPDM. The gate valves incorporated hostaform guide shoes. Maximum working pressure 16.0 bar. Cold water use only.

Size: 450mm, 500mm, 600mm.

Model: Series 55/30 & Series 55/35.

Marking: AVK, DN, PN, manufacturers logo and technical information printed on adhesive label attached to body.AVK, DN and PN cast into body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: AVK International A/S

WRAS Approval Number  0912066

Print this entry

Range of Series 21/80 DK and 21/30 DK resilient seated gate valves with ductile iron bodies and bonnets (blue epoxy powder coated) and ductile iron wedge encapsulated with EPDM and stainless steel stems and EPDM `O` rings. Maximum working pressure 16.0 bar. For use upto 50°C.

Size: DN50 - DN400.

Model: Series 21/80 DK & Series 21/30 DK.

Marking: AVK, size, pressure rating and product information cast onto body.AVK and product information printed on adhesive label on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: AVK International A/S

WRAS Approval Number  1003070

Print this entry

Range of gate valve with ductile iron bodies, wedge and bonnet (blue epoxy powder coated) and EPDM `O` rings and gaskets. Valves are operated via a non-rising spindle headwork. Maximum working pressure 16.0 bar. For use up to 50°C.

Size: DN50, 80, 100, 150, 200, 250 and 300.

Model: AVK and GVL series 37 small range.

Marking: AVK and GVL cast onto body. AVK, logo and product information printed onto adhesive label on base.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: AVK Valves (Anhui) Co. Ltd

Factor:  

WRAS Approval Number  1105060

Print this entry

Range of gate valves with ductile iron bodies with epoxy powder blue coating and EPDM coated resilient wedges. The valves are operated via a non-rising spindle headwork. Valves are available with maximum working pressure 10.0 bar or 16.0 bar. For use with cold water only.

Size:  

Model: BV-05-47-F4 (DN40, 50, 65, 80, 100, 125, 150, 200, 250, 300), BV-05-47-F5 (DN40, 50, 65, 80, 100, 125, 150, 200, 250, 300) & BV-05-47-type BS (DN50, 65, 80, 100, 125, 150, 200, 250, 300).

Marking: Beligicast, model, size and pressure rating on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Belgicast Internacional, S.L.

Factor:  

WRAS Approval Number  0907089

Print this entry

Range of gate valves with brass bodies, brass spindles, and PTFE seals and washers. Available with hand wheel or lockshield operating member. For cold water use only. Maximum working pressure 16.0 bar.

Size: 3/8”, ½”, 1”, 15mm, 22mm, 28mm.

Model: 960985, 960986, 960987, 961148, 961149 & 961150.

Marking: Size, BS 5154 & company logoon body. Product information printed onto data plate on operating member.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: City Plumbing Supplies

WRAS Approval Number  0904316

Print this entry

Snow series of gate valves having a Gunmetal body, bonnet and wedge. Maximum working pressure 25.0 bar. Cold water use only.

Size: DN15 - ½” BSP (F), DN20 - ¾” BSP (F), DN25 - 1” BSP (F), DN32 - 1¼” BSP (F), DN40 - 1½” (F) and DN50 - 2” BSP (F).

Model: RHB-2H Series.

Marking: Direction of operation and Snowflake logo printed onto plate.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Lansdale Services PTY Ltd

Factor: CNB (FAR EAST) Ltd

WRAS Approval Number  0907087

Print this entry

Range of gate valves with brass bodies, brass spindles, and PTFE seals and washers. Available with hand wheel or lockshield operating member. For cold water use only. Maximum working pressure 16.0 bar.

Size: 3/8”, ½”, 1”, 15mm, 22mm, 28mm.

Model: 960985, 960986, 960987, 961148, 961149 & 961150.

Marking: Size, BS 5154 & company logoon body. Product information printed onto data plate on operating member.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Connections

WRAS Approval Number  1011310

Print this entry

Range of bronze bodied gate valves with bronze wedges and PTFE seals. Maximum working pressure 20.0 bar & maximum operating temperature 85°C

Size: ¼", 3/8", ½", ¾", 1", 1¼", 1½" and 2" BSP (F)

Model: 33X (¼" - 2") & 33X LS (½" - 2")

Marking: HNH, size & PN rating on body, BSEN 12288/B & maximum temperature on lock shield and model, BSEN 12288/B rating & direction of operation on operating member data plate.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Crane Yongxiang - CYX

Factor: Crane Ltd

WRAS Approval Number  0912313

Print this entry

Range of gate valves comprising a bronze wedge gate and body, non-rising spindle stem with a screwed in bonnet. Supplied with either a lockshield or a hand wheel operating member. Maximum working pressure 16.0 bar.

Size: 15, 22, 28, 35, 42 and 54 mm.

Model: Crane Brand Fig 30C and Fig 30C LS. Hattersley Brand D155C and D255C.

Marking: Crane ValvesCrane and size cast onto body. Data disc on operating member showing Crane, maximum operating temperatures and pressures and arrow showing direction of operation.Hattersley ValvesHH and size cast onto body Data disc on operating member showing Hattersley, maximum operating temperatures and pressures and arrow showing direction of operation.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Crane YongXiang

Factor: Crane Ltd

WRAS Approval Number  1103331

Print this entry

Range of DZR brass bodied gate valves having DZR brass wedges. Maximum working pressure 20.0 Bar & maximum operating temperature 85°C.

Size: ½”, ¾”, 1”, 1¼”, 1½” and 2”.

Model: Hattersley Brand Fig. 30 & Fig. 30LS.

Marking: HNH on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Valvoindustria Ing Rizzio SPA

Factor: Crane Ltd

WRAS Approval Number  1105327

Print this entry

Range of bronze bodied gate valves with DZR brass gates. Maximum working pressure 20.0 bar & maximum operating temperature 85°C.

Size:  

Model: D151-¼", 3/8" ½", ¾", 1", 1¼", 1½" & 2" D237 - ½", ¾", 1", 1¼", 1½" & 2".

Marking: Crane on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Crane YongXiang

Factor: Crane Ltd

WRAS Approval Number  1007053

Print this entry

Range of Hawle `A` gate valves with a ductile iron body with a blue fusion bonded epoxy coating, DZR brass wedge nut and stainless steel spindle and wedge. Maximum working pressure 16.0 bar. Cold water use only.

Size: DN80, DN100, DN150, DN200.

Model: Hawle `A`.

Marking: Ral GSK logo, Hawle A, size and technical information printed on adhesive label on body. Hawle, size, pressure rating and product information cast onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: E. Hawle Armaturenwerke GmbH

Factor:  

WRAS Approval Number  0912060

Print this entry

Range of gate valves with brass bodies and PTFE washer and seals. The valves are operated via a non-rising spindle headwork. Maximum working pressure L197/P474 16.0 bar. L198 20.0 bar.

Size: L197 and P474 - 15mm, 22mm, 28mm, 35mm, 42mm and 54mm Compression inlets/outlets. L198 - ½", ¾", 1", 1¼", 1½", 1¾", 2", 2¼", 3" and 4" BSP inlet/outlet female.

Model: L197, P474, L198.

Marking: L198 model. Pressure rating, company logo, size, Lamontite England, BS6154 cast onto body. Lamontite England printed onto data plate. L197 and P474 models. Flowflex or Lamontite, size and EN1254-2 cast into compression nut. Flowflex England or Flowflex Lamonite, England, BS 5154, size and Flowflex logo cast onto body. Lamionite England or Flowflex England printed onto data plate.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Zhejiang Romendy Sanitary Ware Co Ltd

Factor: Flowflex Components Ltd

WRAS Approval Number  0809056

Print this entry

AVK Series 54 range of gate valves with a ductile iron body, bonnet and gland flange all being epoxy resin coated. Maximum working pressure 16.0 bar.

Size: DN350 - DN900.

Model: AVK Series 54 middle range of gate valves - sizes DN350-DN900.

Marking: `AVK`, size, pressure rating and technical information cast onto valve body and printed onto adhesive label. `Glenfield` and product information printed on adhesive label.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: AVK Valves (Anhui) Co. Ltd

Factor: Glenfield Valves Ltd

WRAS Approval Number  0909044

Print this entry

F4 (Short body Pattern) and F5 (Long body Pattern) ranges of Gate Valves with ductile iron bodies and bonnets with a blue epoxy resin coating. The wedge is also ductile iron, which is fully encapsulated by EPDM valves are operated via a non-rising spindle headwork via an operating wheel. Cold water use only. Maximum working pressure: DN200 – DN600 PN10, DN50 – DN600 PN16 and DN50 – DN250 – PN25

Size: DN 50 - DN 600.

Model: Gemak AS Series Resilient. Seat gate valves in F4 & F5 pattern.

Marking: Gate Valve, Model (F4 & F5), DN, PN, GEMAK, AS Products, CE & ISO 9001 : 2001 Printed on adhesive label attached to body. GEMAK, DN & PN cast on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Finishing - Gemak - Angelos Sotiras, Greece

Factor: Greenray International Ltd

WRAS Approval Number  0907085

Print this entry

Range of gate valves with brass bodies, brass spindles, and PTFE seals and washers. Available with handwheel or lockshield operating member. For cold water use only. Maximum working pressure 16.0 bar.

Size: 15mm, 22mm, 28mm.

Model: HV 5154CXC (hand wheel operating member). HV5154CXCLS (lockshield operating member).

Marking: Handwheel & lockshield: Size, BS 5154 cast onto body. Handwheel only: Model, and maximum working pressure & temperature printed onto data plate on operating member. Lockshield only: Data plate attached to lockshield printed with model, and pressure and temperature rating.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Herz Valves UK Ltd

WRAS Approval Number  1106055

Print this entry

Range of front loading dishwashing machines. Flow is controlled by a solenoid valve which is fed via nylon braided flexible hose and discharges via a type `AB` airgap assembly incorporating a spacing plate at back of machine. Maximum working pressure 4.0 bar. Cold feed only.

Size: Nylon braided EPDM lined flexible hose assembly incorporating ¾” BSP captive nut end connections.

Model: CE/SPE/STE/DPE Series: C43EBT, C46EBT, C53EBT, C6EBT, C60EBT, C68EBT, C81EBT, C90EBT, SP35EBT, SP40EBT, SP45EBT, SP5EBT, SP50EBT, SP68EBT, SP81EBT, LO50EBT, ST43EBT, ST48EBT, ST53EBT, ST60EBT, DP35EBT, DP40EBT, DP45EBT and DP50EBT. SGE/SDE Series: SG4E, SG45E, SG5EC, SD5EC, SD5ECBT, SG5E, SD5E, SD5EBT and SMWI5E.

Marking: Hoonved logo and model number on control panel. Hoonved logo, company details, model number and product information on side panel.

Installation Requirements : R001           

Note: This appliance incorporates a fluid category 5 backflow protection device.

Proviso:  

Manufacturer: Hoonved Srl

Factor:  

WRAS Approval Number  0910060

Print this entry

Z4704 range of ductile iron gate valves incorporating ductile iron bodies coated with Akzo Nobel Resicoat R4 Blue powder coating, EPDM wedges and hand wheel operating members. For above ground use only. Maximum working pressure 16.0 bar.

Size:  DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500 and DN600.

Model: Hiwa Z4704.

Marking: Body cast with Huihua logo, BS5163, Nominal size, Pressure rating and DI.

Installation Requirements :             

Note:  

Proviso:  

Manufacturer: Huihua Valve Industry Co

Factor:  

WRAS Approval Number  0907066

Print this entry

Range of gate valves with brass or Chinese brass bodies, brass spindles, and PTFE seals and washers. Available with hand wheel or lockshield operating member. For cold water use only. Maximum working pressure 16.0 bar.

Size: 3/8", ½", ¾", 1", 15mm, 22mm, 28mm.

Model: GV0038, GV0012, GV0034, GV0010, GV0015, GV0022, GV0028.

Marking: Brass bodies: Size, BS 5154 & company logo on body. Technical information on plate on operating member. Chinese brass bodies: Size, BS 5154 7 D on body. Technical information on plate on operating member. WRAS, size and EN1254-2 on nut.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Zhejiang Qianjin Plumbing & Heating Co. Ltd.

Factor: IDC Mfg. Group (Beijing Office)

WRAS Approval Number  1001029

Print this entry

Range of gate valves with either brass or bronze bodies and solid wedge disks with non-rising spindle type headworks and PTFE seals and washers. Maximum working pressure 25.0 bar. For cold and hot water use up to 80°C.

Size: DN15 - DN100.

Model: ZUZEM/ZJ Z45X-16Q Series.

Marking: Zuzem, logo, EN 12288, size and pressure cast onto body.

Installation Requirements : R001           

Note: Meets the requirements of a stop valve.

Proviso:  

Manufacturer: Jiangsu Zuzem Valves Co Ltd

Factor:  

WRAS Approval Number  0907090

Print this entry

Range of gate valves with brass bodies, brass spindles, and PTFE seals and washers. Available with hand wheel or lockshield operating member. For cold water use only. Maximum working pressure 16.0 bar.

Size: 3/8”, ½”, 1”, 15mm, 22mm, 28mm.

Model: 960985, 960986, 960987, 961148, 961149 & 961150.

Marking: Size, BS 5154 & company logoon body. Product information printed onto data plate on operating member.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Keyline

WRAS Approval Number  0907086

Print this entry

Range of resilient seated gate valves with ductile iron bodies and bonnets, blue epoxy coating and a ductile iron wedge encapsulated in EPDM. Valve is operated via a non-rising spindle headwork. Maximum working pressure 16.0 bar. Cold water use only.

Size: DN50 - DN600.

Model: M2017FF.

Marking: Unifit, size, pressure rating on body. Unifit and model 2017FF on data.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Linx Ltd

WRAS Approval Number  1012029

Print this entry

Range of gate valves with gunmetal bodies and PTFE packing. The valves incorporate a non-rising spindle headwork with handwheel operated or lockshield and with either compression or capillary end connections. For above ground use only. Maximum working pressure 6 bar. Maximum operating temperature 99°C.

Size: 15mm - 54mm compression inlet/outlet 15mm - 54mm capillary inlet/outlet

Model: YP415 GM 15 - 54mm (Capillary) YP415 GMLS 15 - 54mm- (Capillary) 416 GM 15 - 54mm (Compression) 416 GMLS 15 - 54mm (Compression).

Marking: Pegler logo YP or YF, size and GM on body. Handwheel version - product information on data plate on operating member.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Builders United Corporation.

Factor: Pegler Yorkshire Group Ltd

WRAS Approval Number  1006028

Print this entry

Range of gate valves with gunmetal and bronze bodies, PTFE packing with non-rising spindle headworks and option of wheel or lockshield operating members. Maximum working pressure 20.0 bar & maximum working temperature 85°C.

Size: ½” - 4” Full way gate valve. ½” - 2” Full way gate valve with Lockshield.

Model: ½” - 4” 1070/125 Bronze full way gate valve. ½” - 2” 1070/125 Bronze full way gate valve with Lockshield

Marking: Pegler England, Size, 125 GM and pressure rating cast onto body. Pegler England, Model number and product information printed onto data plate on wheel version.

Installation Requirements : R001           

Note: Meets the requirements of a stop valve.

Proviso:  

Manufacturer: Ban Chang Hardware (Brassware) Co.

Factor: Pegler Yorkshire Group Ltd

WRAS Approval Number  1003332

Print this entry

Range of resilient seated gate valves with ductile iron bodies and bonnets (blue epoxy powder coated) with a ductile iron wedge encapsulated in EPDM using stainless steel stems and EPDM `O` rings. Maximum working pressure 16.0 bar at 85°C.

Size: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500 & DN600.

Model: Z45X-16.

Marking: Manufacturer's logo, PN, DN and WRAS logo cast onto valve body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Qingdao Huaguan Valve Co Ltd

Factor:  

WRAS Approval Number  1007329

Print this entry

Range of gate valves with ductile iron bodies with internal and external epoxy powder blue coating and ductile iron epoxy coated wedges with Gunmetal wedge rings. The valve incorporates a non-rising spindle with a key or hand wheel operating assembly. Maximum working pressure 16.0 bar.

Size: DN50 to DN1200

Model: CV-101 (DN50 - DN300) CV-101L (DN350 - DN1200)

Marking: Manufacturer`s logo (ACE), DN, PN, SG and BS 5163 cast on to valve body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Shanghai Johnson Valve Industries Co Ltd

WRAS Approval Number  1007330

Print this entry

Range of gate valves with ductile iron bodies with internal and external epoxy powder blue coating and ductile iron EPDM coated resilient wedges. The valve incorporates a non-rising spindle with a key or hand wheel operating assembly. Maximum working pressure 16.0 bar.

Size: DN50 to DN700

Model: CV-R101

Marking: Manufacturer`s logo (ACE), DN, PN, SG and BS 5163 cast on to valve body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Shanghai Johnson Valve Industries Co Ltd

WRAS Approval Number  1009063

Print this entry

Range of resilient trim gate valves with ductile iron bodies and bonnets (blue epoxy powder coated), a ductile iron wedge encapsulated in EPDM and stainless steel stems. Valves are operated via a non-rising spindle headwork. Maximum working pressure 16.0 bar. For use above and below ground and with cold water use.

Size: DN50 – DN600.

Model: `SNC` gate valve.

Marking: Company logo, size, pressure rating and product information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Shin Nan Casting Factory Co Ltd

Factor:  

WRAS Approval Number  1107345

Print this entry

Range of gate valves with ductile iron bodies with epoxy powder blue coating and EPDM coated resilient wedges. The valves are operated via a non-rising spindle headwork. Valves are available with maximum working pressure 16.0 bar. For use with cold water only.

Size: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500 and DN600

Model: GBXX-0050-C-230 GBXX-0065-C-230 GBXX-0080-C-230 GBXX-0100-C-230 GBXX-0125-C-230 GBXX-0150-C-230 GBXX-0200-C-230 GBXX-0250-C-230 GBXX-0300-C-230 GBXX-0350-C-230 GBXX-0400-C-230 GBXX-0450-C-230 GBXX-0500-C-230 GBXX-0600-C-230

Marking: Manufacturers logo (AFC), EN1074, Size and PN on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Suzhou Alpine Flow Control Co Ltd

WRAS Approval Number  0907088

Print this entry

Range of gate valves with brass bodies, brass spindles, and PTFE seals and washers. Available with hand wheel or lockshield operating member. For cold water use only. Maximum working pressure 16.0 bar.

Size: 3/8”, ½”, 1”, 15mm, 22mm, 28mm.

Model: 960985, 960986, 960987, 961148, 961149 & 961150.

Marking: Size, BS 5154 & company logoon body. Product information printed onto data plate on operating member.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Travis Perkins

WRAS Approval Number  1004303

Print this entry

Range of brass bodied gate valves having brass wedges and PTFE seals. Maximum working pressure 20.0 Bar.

Size: ½" - 6’’ BSP (F).

Model: PEX 605 BS.

Marking: Pressure rating PEX & size cast onto valve body, PLUMBEX printed on operating handle.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: VADO

WRAS Approval Number  1007344

Print this entry

`VT` range of gate valves with ductile iron bodies with internal and external epoxy powder blue coating and ductile iron EPDM coated resilient wedges. The valve incorporates a non-rising stem with a hand wheel operating member. Maximum working pressure 16.0 bar.

Size: DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500 & DN600.

Model: VT-40Z45X-1 (DN40), VT-50Z50X-16 (DN50), VT-65Z45X-16 (DN65), VT-80Z45X-16 (DN80), VT-100Z45X-1 (DN100), VT-125Z45X-16 (DN125), VT-150Z45X-16 (DN150), VT-200Z45X-16 (DN200), VT-250Z45X-16 (DN250), VT-300Z45X-16 (DN300), VT-350Z45X-1 (DN350), VT-400Z45X-1 (DN400), VT-450Z45X-16 (DN450), VT-500Z45X-16 (DN500) & VT-600Z45X-16 (DN600).

Marking: Label on body with Vahn-Tech International Inc. technical information and vt.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Vahn-Tech International Inc.

WRAS Approval Number  1106054

Print this entry

Range of gate valves with cast iron bodies with blue epoxy coating and EPDM O rings and gaskets. Series 223 incorporates a cast iron wedge encapsulated in EPDM. Series 263 incorporates a cast iron wedge with blue epoxy coating. The valves are operated via a hand wheel or spindle headwork. Maximum working pressure 16.0 bar. Cold water use only.

Size: DN50 – DN300.

Model: Series 223.Series 263.

Marking: Waterfront logo, size, maximum pressure and manufacturer’s information on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Waterfront Fluid Controls (Qungdad) Ltd

Factor: Waterfront Fluid Controls Ltd

WRAS Approval Number  0907084

Print this entry

Range of resilient seated gate valves with ductile iron bodies and bonnets, blue epoxy coating and a ductile iron wedge encapsulated in EPDM. Valve is operated via a non-rising spindle headwork. Maximum working pressure 16.0 bar. Cold water use only.

Size: DN50 - DN600.

Model: Weflo Fig.3243

Marking: Weflo, size, pressure rating cast onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Weflo Valve Company Ltd.

WRAS Approval Number  0907070

Print this entry

Range of resilient seated gate valves with ductile iron bodies and bonnets, blue epoxy coating and a ductile iron wedge encapsulated in EPDM. Valve is operated via a non-rising spindle headwork. Maximum working pressure 16.0 bar. Cold water use only.

Size: DN50 - DN600.

Model: Fig 3243.

Marking: Weilong, size, pressure rating cast onto body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Weilong Valve Co Ltd

Factor:  

WRAS Approval Number  0907100

Print this entry

Range of gate valves with brass bodies, brass spindles, and PTFE seals and washers. For cold water use only. Maximum working pressure 16.0 bar.

Size: 15mm & 22mm

Model: 420185 & 420170

Marking: Size, BS 5154 cast or printed onto body. Manufacturers logo printed onto body. Product information printed onto data plate on operating member.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer:  

Factor: Wickes Building Supplies Ltd.

WRAS Approval Number  1003331

Print this entry

Range of non-rising resilient seated gate valves with ductile iron bodies and bonnets (blue epoxy powder coated) with a ductile iron wedge encapsulated in EPDM using stainless steel stems and EPDM `O` rings. Maximum working pressure DN50 - 25.0 bar, DN65 - DN600 16.0 bar.

Size: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN400, DN450, DN500 & DN600

Model: Model Size Z45X-25-50 DN50 Z45X-16-65 DN65 Z45X-16-80 DN80 Z45X-16-100 DN100 Z45X-16-125 DN125 Z45X-16-150 DN150 Z45X-16-200 DN200 Z45X-16-250 DN250 Z45X-16-300 DN300 Z45X-16-350 DN350 Z45X-16-400 DN400 Z45X-16-450 DN450 Z45X-16-500 DN500 Z45X-16-600 DN600

Marking: Manufacturer's logo, DN, PN, and 450-10 cast onto valve body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Wuhan Dayu Valve Manufacture Co Ltd

Factor:  

WRAS Approval Number  0810040

Print this entry

`AVA` range of gate valves with a ductile iron body, bonnet and gland all being epoxy resin coated with a bronze body and wedge seat ring. Maximum working pressure 16.0 bar.

Size: DN40 - DN400.

Model: Model HY-002B.

Marking: BS5163, SGCF, size, pressure and company name cast onto valve bodies.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Wuhu Huayi Valve Manufacturing Co. Ltd

Factor:  

WRAS Approval Number  1106036

Print this entry

Range of gate valves with brass or Chinese brass bodies, wedge spindles, and PTFE seals and washers with hand wheel operating members. For cold water use only. Maximum working pressure 16.0 bar.

Size:  

Model: GV0141 - 1¼”. GV0121 - 1½”. GV0020 - 2”. GV0035 - 35mm. GV0042 - 42mm. GV0054 - 54mm.

Marking: Brass bodies: Company logo and size on body. Chinese brass bodies: Size, D & BS 5154 on body. Technical information on plate on operating member. WRAS, size and EN1254-2 on nut.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Yuhuan Edison Brasswork Inc Co Ltd

Factor: Zhejiang IDC Fluid Control Co Ltd

WRAS Approval Number  1109399

Print this entry

Range of gate valves with ductile iron bodies with epoxy powder blue coating and EPDM coated resilient wedges. The valves are operated via a non-rising spindle headwork. Maximum working pressure 16.0 bar. For use with cold water only.

Size: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500 and DN600

Model: RVHX-0050CRVHX-0065CRVHX-0080CRVHX-0100CRVHX-0125CRVHX-0150CRVHX-0200CRVHX-0250CRVHX-0300CRVHX-0350CRVHX-0400CRVHX-0450CRVHX-0500CRVHX-0600C

Marking: Manufacturer’s logo (IDC), Size and PN on body

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Zhejiang IDC Fluid Control Co Ltd

Factor:  

WRAS Approval Number  1106035

Print this entry

Range of gate valves with brass or Chinese brass bodies, PTFE seals and fibre washers. For cold water use only. Maximum working pressure 16.0 bar.

Size: 22mm compression x 1½” BSP captive nut & 28mm compression x 1½” BSP captive nut,

Model: PVG0022 & PVG0028.

Marking: Brass bodies: Company logo and size on body. Chinese brass bodies: Size and D on body. WRAS, size and EN1254-2 on body.

Installation Requirements : R001           

Note:  

Proviso:  

Manufacturer: Yuhuan Edison Brasswork Inc Co Ltd

Factor: Zhejiang IDC Fluid Control Co Ltd