 |
|
WRAS
Approved Materials
|
Coatings, Paints & Linings |
Section 5034 |
|
Factory applied cistern coatings |
|
|
|
WRAS
Approval Number 1209505 |
|
|
Rocathaan Hotspray PA 136 - T. Factory applied, two component, off-white coloured polyurea coating. Apply as per manufacturer`s instructions. Cure for 10 minutes at ambient (22°C) temperature. For use with water up to 23°C.
|
|
Supplier: Technokol Beheer B.V. |
|
WRAS
Approval Number 0908536 |
|
|
IB10029A Isopol Brush Gel Coat. Grey coloured, isophthalic brushing polyester gelcoat. Intended for use during the hand-lay manufacture of GRP components only, not to be used on site or as a repair material. Apply and cure as per manufacturer`s instructions. For use with hot and cold water up to 40°C.
|
|
Supplier: Colorplas Ltd |
|
WRAS
Approval Number 0903502 |
|
|
Hempadur 15590 and Hempadur 35560. Two part primer and two part topcoat. Off-white colour. Cured for 13 days at 23°C then soaked in tap water for 2 X 24 hours at 23°C. Cold wtare use only.
|
|
Supplier: Hempel A/S |
|
WRAS
Approval Number 0911510 |
|
|
Hempadur multi-strength 35530 (base 35539 with curing agent 95530). Light grey coloured, two part, factory applied, polyamine cured epoxy paint. For cold water use only.
|
|
Supplier: Hempel A/S |
|
WRAS
Approval Number 0911509 |
|
|
Hempadur 35560 (base 35569 with curing agent 98560). Pink/brown coloured, two part, factory applied, polyamine cured epoxy paint. For hot and cold water use up to 35°C.
|
|
Supplier: Hempel A/S |
|
|
|
