Rubbers

Section 5365

Ethylene Propylene Diene Monomer (EPDM) - material only

Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number 1112532

EW 45-45, EW 50-50, EW 53-55, EW 60-60, EW 65-65, EW 70-70, EW 75-75, EW 80-80, EW 81-80 & EW 85-85. Black coloured, transfer moulded EPDM rubber material. Shore hardness between 45 IRHD and 85 IRHD. Tested in-radius size 1.13mm. For use with water up to 23°C. When processing an application for a Fittings Approval incorporating this product, the in-radius tolerance rule cannot be applied, i.e. the material with a tested in-radius size of 1.13mm is the only product covered by the scope of this approval.

Supplier: VIP Polymers Ltd

WRAS Approval Number 1112504

CVE 69. Black coloured, transfer moulded, EPDM rubber sheet material. Shore hardness 70. Tested in-radius 1.15mm. For use with water up to 23°C.

Supplier: VIP Polymers Ltd

WRAS Approval Number 1111514

EPDM 69064340. Black coloured, rubber sheet material. Shore hardness 57. Tested in-radius size 0.905mm. For use with water up to 23°C. Note: When processing an application for a Fittings Approval incorporating this product, the in-radius tolerance rule cannot be applied, i.e. the material with a tested in-radius size of 0.905mm is the only product covered by the scope of this approval.

Supplier: Trelleborg Pipe Seals Lelystad BV

WRAS Approval Number 1304525

5053B027. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 0.91mm. For use with water up to 23°C.

Supplier: Industrial Rubber Plc.

WRAS Approval Number 1303512

ML57314. Black coloured, compression moulded, EPDM rubber sheet material. Shore hardness 68 Shore A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Supplier: Anvis Deutschland GmbH.

WRAS Approval Number 1211509

CEW50. Black coloured, transfer moulded EPDM rubber sheet material. Shore hardness 50. Tested in-radius size 1.19mm. For use with water up to 23°C.

Supplier: VIP Polymers Ltd

WRAS Approval Number 1304526

EIW-55-. Black coloured, injection moulded EPDM sheet material. Shore hardness 53. Tested in-radius size 1.0mm. For use with water up to 50°C.

Supplier: AVK GUMMI A/S

WRAS Approval Number 1208540

WX-EP70210. Black coloured, compression moulded, EPDM rubber sheet material. Shore hardness 60. Tested in-radius size 1.00 mm. For use with water up to 85°C.

Supplier: Xiamen Waexim Rubber Co Ltd

WRAS Approval Number 1304507

JG65-1815. Black coloured, compression moulded EPDM rubber sheet material. Shore hardness 75. Tested in-radius size 0.5mm. For use with water up to 85°C.

Supplier: Hebei Jingang Rubber & Plastic Co. Ltd.

WRAS Approval Number 1303515

DPPPL. Black coloured, compression moulded EPDM sheet material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 60°C.

Supplier: Durable Polymer Products Pvt. Ltd

WRAS Approval Number 1302535

E2514. Black coloured, compression moulded EPDM material. Shore hardness 67A. Tested in-radius 1mm. For use with water up to 23°C.

Supplier: Semperit Technische Produkte GmbH

WRAS Approval Number 1002551

EP 500/76394. Black coloured, injection moulded, EPDM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with hot and cold water up to 85°C.

Supplier: Blatt & Co GmbH

WRAS Approval Number 0904544

E7002BK. Black coloured EPDM sheet rubber material manufactured by compression moulding. Shore hardness of 70°. Tested in-radius of 1mm. For use with water up to 85°C

Supplier: Jintan Debo Seal Technology Co. Ltd.

WRAS Approval Number 1203506

WRM-50. Black coloured, compression moulded EPDM rubber sheet material. Shore hardness 53. Tested in-radius 1.00mm. For use with water up to 70°C.

Supplier: Waheguru Rubber Manufacturing Co. (P) Ltd

WRAS Approval Number 1201516

SBPPPL. Black coloured, compression moulded EPDM rubber sheet material. Shore hardness 50. Tested in-radius size 1mm. For use with water up to 60°C.

Supplier: Shree Balaji Polytech Products PVT Ltd.

WRAS Approval Number 1303514

EP-P50, EP-P60, EP-P70 & EP-P80. Black coloured, compression moulded EPDM rubber material. Shore hardnesses 50, 60, 70 & 80. Tested in-radii sizes between 0.87mm & 1.03mm. For use with water up to 23°C.

Supplier: Polytech Industries LLC

WRAS Approval Number 1203505

EPDM Compound HT5697-5. Black coloured, injection moulded EPDM rubber sheet material. Tested in-radius size 1.00mm. Shore hardness 67. For use with water up to 23°C.

Supplier: Terramix SA/Hultec

WRAS Approval Number 1201509

`P.R.I-EPDM`. Black coloured, compression moulded EPDM rubber sheet material. Shore hardness 50-80. Tested in-radius size 1.00mm. For use with water up to 23°C.

Supplier: Plasto Rubber PVT. LTD.

WRAS Approval Number 1110535

E7014WRC. Black coloured, compression moulded EPDM sheet material. Shore hardness 70 Shore A. Tested in-radius 1mm. For use with water up to 85°C.

Supplier: Satori Seal Corporation

WRAS Approval Number 1303506

EP-70-Campot. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius of 1.25mm. For use with water up to 23°C.

Supplier: Belgicast Internacional, S.L.

WRAS Approval Number 1206549

EP960. Black coloured, injection moulded EPDM rubber sheet material. Shore hardness 70. Tested in-radius size 1mm. For use with water up to 50°C.

Supplier: Wuxi Yuchang Valve Components Co. Ltd.

WRAS Approval Number 1301552

EWA12150 (EW48) (Shore hardness 50A), EWA12155 (EP53) (Shore hardness 55A), EWA12160 (Shore hardness 60A), EWA12165 (EW65 2GS) (Shore hardness 65A), EWA12170 (WRC 70) (Shore hardness 70A) & EWA12180 (EW80) (Shore hardness 80A). Black coloured, compression moulded, EPDM Rubber sheet material. Test in-radius size 0.94mm. For use with water up to 23°C.

Supplier: Andhra Polymers Pvt. Ltd

WRAS Approval Number 1302510

EPDM-812-C (H70). Black coloured, compression moulded EPDM rubber material. Shore hardness 70A. Tested in-radius size 1mm. For use with water up to 23°C

Supplier: Ein Shemer Rubber Industries A.C.A. Ltd

WRAS Approval Number 1203532

Kowa Rubber EPDM 60IRHD & Kowa Rubber EPDM 65IRHD. Black coloured, injection moulded EPDM rubber material. Tested in radius size 1mm. Shore hardness 60 & 65 respectively. For use with water up to 23°C.

Supplier: Kowa Rubber Industries Co., Ltd.

WRAS Approval Number 1301531

E7014F. Black coloured, compression moulded, EPDM sheet material. Shore hardness 70. Tested in-radius size 0.5mm. For use with water up to 85°C.

Supplier: Xiamen Maihua Rubber Products Co Ltd

WRAS Approval Number 1205501

D0012. Black coloured, EPDM rubber material manufactured by vulcanised moulding. Tested in-radius size 1.06mm. Shore hardness 70. For use with water up to 85°C.

Supplier: Rong Sheng Long Rubber

WRAS Approval Number 1204500

Oldal 480 EV75E (cured 6 minutes at 190°C). Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radii sizes between 1.16mm & 1.55mm. For use with water up to 85°C.

Supplier: Oldrati Guarnizioni Industriali Spa

WRAS Approval Number 1208512

EP01961PWRC. Black coloured, compression moulded, EPDM rubber sheet material. Shore hardness 60. Tested in-radius size 1.00 mm. For use with water up to 85°C.

Supplier: Chang Horing Rubber Co., Ltd.

WRAS Approval Number 0904542

EP7037K. Black coloured EPDM sheet rubber material manufactured by compression moulding. Shore hardness 70°. Tested in-radius of 1mm. For use with water up to 85°C.

Supplier: Progum Elastomer Technology Co Ltd

WRAS Approval Number 1206556

BTEP70. Black coloured, compression moulded, EPDM rubber sheet material. Shore hardness 70. Tested in-radius size 1.00 mm. For use with water up to 40°C.

Supplier: Sichuan Beiteer Rubber Technology Co., Ltd.

WRAS Approval Number 1203522

ZJBN01. Black coloured, extruded, EPDM rubber sheet material. Shore hardness 80. Tested in-radius size 1.00mm. For use with water up to 70°C.

Supplier: Zhejiang Baina Rubber & Plastic Equipment Co., Ltd

WRAS Approval Number 1112503

CVE 78. Black coloured, transfer moulded, EPDM rubber sheet material. Shore hardness 80. Tested in-radius size 1.15mm. For use with water up to 60°C.

Supplier: VIP Polymers Ltd

WRAS Approval Number 1208502

E630b. Black coloured, compression moulded, EPDM sheet material. Shore hardness 70A. Tested in-radius size 1.25mm. For use with water up to 23°C.

Supplier: Semperit Technische Produkte GmbH

WRAS Approval Number 1010529

E7015WRC. Black coloured, compression moulded EPDM rubber sheet material. Shore hardness 70. Tested in-radius size 1mm. For use with water up to 85°C.

Supplier: Satori Seal Corporation

WRAS Approval Number 1207537

7275. Black coloured, injection moulded EPDM sheet material. Shore hardness 75. Tested in-radius size 1.76mm. For use with water up to 85°C.

Supplier: Capla SAS.

WRAS Approval Number 1206572

Sunaflex T 8715. Black coloured, compression moulded EPDM material. Shore hardness 50A. Tested in-radius size 1mm. For use with water up to 85°C.

Supplier: Compounds AG

WRAS Approval Number 1302524

Sunaflex T 8165. Black coloured, compression moulded EPDM sheet material. Shore hardness 70A. Tested in-radius size 1.0mm. For use with water up to 65°C.

Supplier: Compounds AG

WRAS Approval Number 1302521

ST-E45. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius size 0.5mm. For use with water up to 23°C.

Supplier: Suntex Import & Export Trading Co. Ltd.

WRAS Approval Number 1208517

EPDM 69074411. Black coloured, injection moulded, EPDM rubber sheet material. Shore hardness 74. Tested in-radius 0.99mm. For use with water up to 23°C.

Supplier: Trelleborg Pipe Seals Lelystad BV

WRAS Approval Number 1302506

E7576. Black coloured, compression moulded EPDM material. Shore hardness 70A. Tested in-radius size 1mm. For use with water up to 85°C.

Supplier: Trelleborg Sealing Solutions GmbH

WRAS Approval Number 1210518

EP70A9OF. Black coloured, compression molded EPDM material. Shore hardness 70. Tested in-radius 1.06mm. For use with water up to 85°C.

Supplier: Fannteer Co Ltd

WRAS Approval Number 1302504

Sunaflex T 9635. Black coloured, compression moulded EPDM material. Shore hardness 70A. Tested in-radius size 1mm. For use with water up to 85°C.

Supplier: Compounds AG

WRAS Approval Number 1208536

EP601289C. Black coloured, compression moulded, EPDM rubber sheet material. Shore hardness 60. Tested in-radius size 1.00 mm. For use with water up to 85°C.

Supplier: Fannteer Co Ltd

WRAS Approval Number 1301539

HW-EPDM. Black coloured, compression moulded EPDM material. Shore hardness 50. Tested in-radius 1mm. For use with water up to 70°C.

Supplier: Holdwell Components Private Ltd.

WRAS Approval Number 0812501

LJHY, black coloured, moulded EPDM rubber sheet material. Shore hardness 75. Tested in-radius size 0.5mm. For use with hot and cold water up to 85°C.

Supplier: Anhui Lujiang Huayi Rubber Products Co. Ltd.

WRAS Approval Number 0808524

ML 57308. Black coloured, compression moulded EPDM rubber sheet material. Shore hardness 75. Tested in-radius 1.00mm. For use with water up to 60°C.

Supplier: Anvis France Epinal SAS

WRAS Approval Number 0808523

ML 57302. Black coloured rubber sheet material (EPDM). Shore hardness 55. Tested in-radius 1mm. Cold water use only.

Supplier: Anvis France Epinal SAS

WRAS Approval Number 1004507

EBJ-75. Black coloured, injection moulded, EPDM rubber sheet material. Tested in-radius size 0.97mm. Shore hardness 75. For use with cold water only.

Supplier: AVK GUMMI A/S

WRAS Approval Number 1005505

EUW-75. Black coloured, injection moulded, EPDM rubber material. Shore hardness 75. Tested in-radius size 1mm. For use with cold water only.

Supplier: AVK GUMMI A/S

WRAS Approval Number 0902500

EUW-60. Black coloured EPDM sheet rubber material. Shore hardness 60°. Tested in-radius of 1.01mm. For cold water use only.

Supplier: AVK GUMMI A/S

WRAS Approval Number 0903503

ESW-80. Black coloured EPDM rubber sheet material. shore hardness 75°. Tested in-radius of 1.05mm. Cold water use only.

Supplier: AVK GUMMI A/S

WRAS Approval Number 0910501

EMW-80. Black coloured, injection moulded, EPDM rubber sheet material. Shore hardness 80. Tested in-radius size 1.10mm. For use with cold water only.

Supplier: AVK GUMMI A/S

WRAS Approval Number 1106502

EBW-65. Black coloured, injection moulded EPDM rubber material. Shore hardness 65. Tested in-radius size 0.93mm. For use with water up to 85°C.

Supplier: AVK GUMMI A/S

WRAS Approval Number 1105517

Black coloured, injection moulded, EPDM rubber sheet. Shore hardness 70. Tested in-radius 1.1 mm. For use with water up to 85°C.

Supplier: AVK GUMMI A/S

WRAS Approval Number 1106501

EUW-75. Black coloured, injection moulded EPDM rubber material. Shore hardness 75. Tested in-radius size 1.03mm. For use with water up to 50°C.

Supplier: AVK GUMMI A/S

WRAS Approval Number 1009510

EUW-80. Black coloured, injection moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 0.91mm. For use with water up to 23°C.

Supplier: AVK GUMMI A/S

WRAS Approval Number 1011521

ESW-70. Black coloured, injection moulded EPDM rubber sheet material. Shore hardness 70 A. Tested in-radius size 0.57mm. For use with water up to 50°C.

Supplier: AVK GUMMI A/S

WRAS Approval Number 1002546

BV EPDM. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in radius size 1mm. For use with water up to 80°C.

Supplier: Belven NV

WRAS Approval Number 1010514

EPOE7001P-WRC. Black coloured, compression moulded EPDM rubber sheet material. Shore hardness 70. Tested in-radius size 1mm. For use with water up to 85°C.

Supplier: Best Ring Industrial Corporation

WRAS Approval Number 0904524

EP02971PWRC. Black coloured EPDM sheet rubber material manufactured by compression moulding. Shore hardness of 70°. Tested in-radius of 1mm. Suitable for use with hot and cold water up to 85°C

Supplier: Chang Horing Rubber Co., Ltd.

WRAS Approval Number 1107516

LC 50-90. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius 1.5mm. For use with water up to 85°C.

Supplier: Comet Srl

WRAS Approval Number 1110533

Sunaflex T 8289. Black coloured, compression moulded EPDM sheet material. Shore hardness 70A. Tested in-radius 1mm. For use with water up to 23°C.

Supplier: Compounds AG

WRAS Approval Number 1003529

Sunaflex T 8269. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius 1.25mm. For use with hot and cold water up to 85°C.

Supplier: Compounds AG

WRAS Approval Number 1109543

Sunaflex T 8157. Black coloured, compression moulded EPDM rubber material. Shore hardness 60. Tested in-radius size 1mm. For use with water up to 85°C.

Supplier: Compounds AG

WRAS Approval Number 0910534

DSM K512. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius 1mm. For use with hot and cold water up to 65°C.

Supplier: Dalian Huirui Rubber Products Co Ltd

WRAS Approval Number 0808510

Dexine E6392 (shore hardness 80) and Dexine E6029 (shore hardness 70). Black coloured, EPDM sheet material. Tested in-radius size of 1mm. For use with cold water only.

Supplier: Dexine Rubber Company Ltd

WRAS Approval Number 1207517

EC-6509-A. Black coloured, compression moulded EPDM rubber material. Shore hardness 65. Tested in-radius size 1mm. For use with water up to 80°C.

Supplier: DiaCom Corporation

WRAS Approval Number 1105512

E701/A EPDM compound. Black coloured, compression moulded EPDM material sheet. Shore hardness 75. Tested in-radius 1 mm. For use with water up to 23°C.

Supplier: Duram Industries A C Ltd

WRAS Approval Number 1011524

24640. Black coloured, compression moulded EPDM sheet material. Tested in-radius 0.825mm. Shore hardness 60. For use with water up to 23°C 24641. Black coloured, compression moulded EPDM sheet material. Tested in-radius 0.845mm. Shore Hardness 70. For use with water up to 23°C.

Supplier: Eastland Compounding

WRAS Approval Number 0806505

17475. Black coloured EPDM sheet material. Shore hardness 70A. For use with cold water only.

Supplier: Eastland Compounding

WRAS Approval Number 1009548

EPDM 825-C. Black coloured, extruded EPDM sheet material. Shore hardness 80 A. Tested in-radius size 1mm. For use with water up to 23°C.

Supplier: Ein Shemer Rubber Industries A.C.A. Ltd

WRAS Approval Number 0904529

ME0942, black coloured EPDM sheet material. Shore hardness 40, 45, 50, 55, 60, 65, 70, 75, 80, 85 & 90. Tested in radius size between 1.00mm & 1.05mm. For use with water up to 85°C.

Supplier: Elastotech srl (formerly Fluorgum srl)

WRAS Approval Number 0904528

ME0940, black coloured EPDM sheet material. Shore hardness 40, 45, 50, 55, 60, 65, 70, 75, 80, 85 & 90. Tested in radius size between 1.05mm & 1.15mm. For use with water up to 85°C.

Supplier: Elastotech srl (formerly Fluorgum srl)

WRAS Approval Number 0904540

EP701253C. Black coloured, compression moulded EPDM sheet material. Shore hardness 70°. Tested in-radius 1mm. for use with water up to 85°C.

Supplier: Frannteer Co Ltd

WRAS Approval Number 1109529

Bianca 782628. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius 2mm. For use with water up to 85°C.

Supplier: Guangzhou Bianca Rubber Manufacturers Company Ltd

WRAS Approval Number 1002538

EP500. Black coloured, injection moulded, EPDM rubber material. Shore hardness 70. Tested in-radius size 1mm. For use with hot and cold water up to 85°C.

Supplier: Guarnimed

WRAS Approval Number 0907535

EPDM 5711. Black coloured, compression moulded EPDM sheet material. Shore hardness 75. Tested in-radius size 1mm. For use with hot and cold water up to 85°C.

Supplier: Gulf Rubber Australia

WRAS Approval Number 0902526

EPDM 5613. Black coloured, injection moulded, EPDM sheet material. Shore hardness 65. Tested in-radius size 1mm. For use with hot and cold water up to 85°C.

Supplier: Gulf Rubber Australia

WRAS Approval Number 0910514

AA8FAZ. Black coloured, injection moulded EPDM sheet material. Shore hardness 70. Tested in-radius size 0.75mm. For use with hot and cold water up to 85°C.

Supplier: Gummiwerk Kraiburg GmbH & Co

WRAS Approval Number 0906522

AA7BCZ. Black coloured, injection moulded EPDM sheet material. Shore hardness 70. Tested in-radius size 0.75mm. For use with hot and cold water up to 85°C.

Supplier: Gummiwerk Kraiburg GmbH & Co

WRAS Approval Number 1107514

EP02971PWRC. Black coloured, compression moulded EPDM rubber sheet material. Tested in-radius size 1mm. Shore hardness 70. For use with water up to 85°C.

Supplier: Hun Yi Rubber Industrial Co. Ltd.

WRAS Approval Number 0903504

5083B049 Black 80A and 5093B008 Black 90A. Black coloured, compression moulded EPDM rubber material. Shore hardness 80° and 90° respectively. Tested in radius of 1.1mm. Cold water use only.

Supplier: Industrial Rubber Plc.

WRAS Approval Number 0807509

5053B027 (shore hardness 50), 5063B054 (shore hardness 60), 5073B083 (shore hardness 70) & 5053B028 (shore hardness 50). Black coloured, compression moulded EPDM sheet material. Tested in-radius of 1mm. For use with cold-water only.

Supplier: Industrial Rubber Plc.

WRAS Approval Number 1110519

APE 70N. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius size 1.05mm. For use with water up to 23°C.

Supplier: Intermarp (Italia) Spa

WRAS Approval Number 1009550

APE 55 N. Black coloured, injection moulded EPDM rubber sheet material. Tested in-radius size 1.03mm. Shore hardness 55. For use with water up to 23°C.

Supplier: Intermarp (Italia) Spa

WRAS Approval Number 1002507

TWR 5S (shore hardness 55) & TWR 7S (shore hardness 70). Black coloured, injection moulded EPDM rubber material. Tested in-radius size 1mm. For use with cold water and as a material for elastomeric seal for pipe and joint fittings that will be used with water main pipe of 25mm ID or greater only.

Supplier: Intermarp (Italia) Spa

WRAS Approval Number 1206503

EP62 rubber sheet material. Black coloured, compression moulded, EPDM rubber sheet material. Shore hardness 85. Tested in-radius size 1.50 mm. For use with water up to 85°C.

Supplier: James Walker & Co Ltd (Cockermouth)

WRAS Approval Number 1105525

G7503. Black coloured, injection moulded EPDM material. Shore hardness 75. Tested in-radius 1 mm. For use with water up to 23°C.

Supplier: Jeantet Elastomers

WRAS Approval Number 1010527

E845. Black coloured, injection moulded EPDM sheet material. Shore hardness 80. Tested in-radius size 1mm. For use with water up to 23°C.

Supplier: JP Polymer Sheetings Ltd.

WRAS Approval Number 0807510

E61-8. Black coloured, EPDM sheet material. Shore hardness 70A. For use with cold water only.

Supplier: Kitz Corporation

WRAS Approval Number 0906532

E225-5. Black coloured, injection moulded, EPDM sheet material. Shore hardness 70A. Tested in-radii sizes between 0.99mm and 4.79mm. For use with cold water only.

Supplier: Kitz Corporation

WRAS Approval Number 0905526

R171WM. Black coloured EPDM rubber sheet material. Shore hardness 75. Tested in-radius size of 1mm. For use with water up to 60°C.

Supplier: Klamflex Pipe Couplings (Pty) Ltd

WRAS Approval Number 1008544

0713.17/55 & 0713.17/70. Black coloured, compression moulded EPDM sheet material. Shore hardness 55 & 70 respectively. Tested in-radius size between 0.91mm and 1.115mm. For use with water up to 23°C.

Supplier: Luebke & Vogt. GmbH & Co. KG

WRAS Approval Number 0807512

EWA 8250 (shore hardness 50A), EWA 9165 (shore hardness 65A) & EWA 8180 (shore hardness 80A). Black coloured EPDM rubber sheet material. Tested in-radius size 0.5mm. For use with hot and cold water up to 70°C. *This approval will not be renewed when it expires in July 2013*

Supplier: M/S Andhra Polymers Private Ltd

WRAS Approval Number 1107508

H34-50, H34-62 & H34-70. Black coloured, compression moulded EPDM sheet materials. Shore hardness 50, 62 and 70 respectively. Tested in-radius 1mm. For use with water up to 23°C

Supplier: Medplast

WRAS Approval Number 0907547

SM177. Black coloured, compression moulded EPDM sheet material, intended for the manufacture of gaskets. Shore hardness 70. Tested in-radius size 1.5mm. For hot and cold water use up to 60°C.

Supplier: Metroseal

WRAS Approval Number 1104510

A-KT 70-00. Black coloured, injection moulded EPDM sheet material. Shore hardness 70. Tested in-radius size 0.8mm. For use with water up to 85°C.

Supplier: Metzeler TRS

WRAS Approval Number 1110520

E7035PF. Black coloured, compression moulded EPDM sheet material. Shore hardness 70 Shore A. Tested in-radius 1mm. For use with water up to 85°C.

Supplier: MFC Sealing Technology Co Ltd / MFC Sealing Technology (Shenzen) Co Ltd

WRAS Approval Number 1104512

NER-EPDM. Black coloured compression moulded EPDM sheet material. Shore hardness 50. Tested in-radius 1mm. For use with water up to 60°C

Supplier: National Engineering Industries Ltd

WRAS Approval Number 1108517

EPDM 70 PEROX - EP173. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius size 1mm. For use with water up to 85°C.

Supplier: NovoTema Spa

WRAS Approval Number 0903518

E75B391. Black coloured, compression moulded EPDM rubber compound. Shore hardness of 75°. Tested in-radius of 1.06mm. Suitable for use with hot and cold water up to 85°C.

Supplier: Novotema Spa.

WRAS Approval Number 1105508

AG 030. Black coloured EPDM rubber sheet material manufactured by calendaring. Shore hardness 60. Tested in-radius size 0.5mm. For use with water up to 60°C.

Supplier: Ocean Rubber Factory

WRAS Approval Number 1109515

EA 651-70. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius 0.99mm. For use with water up to 23°C.

Supplier: Parker Hannifin Corporation

WRAS Approval Number 0807528

EW50 (shore hardness 50A), EW65 (shore hardness 65A) & EW80 (shore hardness 80A). Black coloured EPDM rubber sheet material. Tested in-radius size 0.5mm. For use with hot and cold water up to 70°C.

Supplier: Polytech Industries LLC

WRAS Approval Number 0811512

BW 5910. Black coloured EPDM sheet rubber material. Shore hardness 55° ± 5°. Tested in-radius of 1.03mm. Intended to be used as a gasket for joining pipes. For use with hot and cold water up to 70°C.

Supplier: Prabhat Elastomers Pvt. Ltd.

WRAS Approval Number 1108510

Rek-5000-Premium & Rek-8000-Premium. Black coloured, compression moulded EPDM sheet material. Shore hardness 50 & 80 respectively. Tested in-radius size 1.0mm. For use with water up to 85°C.

Supplier: Rekor Kaucuk Sanayi ve Ticaret A.S.

WRAS Approval Number 0812500

EAP 73. Black coloured, injection moulded, EPDM sheet material. Shore hardness 70. Tested in-radius size 1.22mm. For use with hot and cold water up to 85°C.

Supplier: Saci Srl

WRAS Approval Number 1108529

SMS-5000 & SMS-8000. Black coloured, compression moulded EPDM sheet material. Shore hardness 50 & 80 respectively. Tested in-radius size 1.0mm. For use with water up to 85°C.

Supplier: Samsun Makina Sanayi A.S.

WRAS Approval Number 0912517

EDBS 85-70. Black coloured, compression moulded, EDPM material. Shore hardness 70. Tested in-radius 1mm. For cold water use only.

Supplier: Sattec DBS Gomma Srl

WRAS Approval Number 0905506

EDXX 74. Black coloured EPDM rubber sheet material. Shore hardness 73. Tested in-radius of 1mm. Suitable for use with hot and cold water up to 85°C

Supplier: Sattec DBS Gomma Srl

WRAS Approval Number 1105510

E2532 black. Black coloured, compression moulded EPDM sheet material. Shore hardness 55. Tested in-radius 1.28 mm. For use with water up to 23°C.

Supplier: Semperit Technische Produkte GmbH

WRAS Approval Number 1009500

E 2515. Black coloured, compression moulded EPDM material. Shore hardness 67. Tested in-radius 0.9mm. For use with water up to 23°C.

Supplier: Semperit Technische Produkte GmbH

WRAS Approval Number 1007505

E 0265. Black coloured, compression moulded, EPDM material. Shore hardness 80. Tested in-radius size 1.21mm. For use with water up to 23°C.

Supplier: Semperit Technische Produkte GmbH

WRAS Approval Number 0912518

XL. Black coloured, compression moulded EPDM material. Shore hardness 73-77A. Tested in-radius 1mm. for hot and cold water use up to 85°C.

Supplier: Shanghai Xinlou Special Seals Co. Ltd

WRAS Approval Number 1110531

EP-YJ-A. Black coloured, compression moulded EPDM rubber sheet material. Shore hardness 75. Tested in-radius size 1.00 mm. For use with water up to 50°C.

Supplier: Shanghai Yuejian Seal Co., Ltd.

WRAS Approval Number 0812513

EP3/6/4 BLK. Black coloured, EPDM `O` ring. Shore hardness 70. Tested in-radius size 1.31mm. For use with hot and cold water up to 85°C.

Supplier: Superior Seals Ltd

WRAS Approval Number 0912508

EP11/8/3, black coloured, injection moulded EPDM rubber `O` rings. Shore hardness 80. Tested in-radius size 1.2mm. For use with hot and cold water use up to 85°C.

Supplier: Superior Seals Ltd

WRAS Approval Number 0807511

334137. Black coloured, EPDM rubber sheet material. Shore hardness 70. For use with hot and cold water up to 85°C.

Supplier: Techne

WRAS Approval Number 0812511

PT0165. Black coloured EPDM rubber compound. Shore hardness 70°. Tested in-radius of 1mm. For hot and cold water use up to 85°C

Supplier: Techno Seals Srl

WRAS Approval Number 0807518

TIMO 3-60. Black coloured, EPDM rubber sheet material. Shore hardness 60. For use with hot and cold water up to 85°C.

Supplier: Tecnogomma International Srl

WRAS Approval Number 0810518

Timo 3-70. Black coloured EPDM material. Shore hardness 70°. Tested in-radius 1.15mm. For hot and cold water use up to 85°C.

Supplier: Tecnogomma International Srl

WRAS Approval Number 0809500

TIMO-70. Black coloured, EPDM rubber sheet material. Shore hardness 70A. Tested in-radius size 1.23mm. For use with hot and cold water up to 85°C.

Supplier: Tecnogomma International Srl

WRAS Approval Number 1010506

HT5557-5. Black coloured, injection moulded EPDM sheet material. Shore hardness 50. Tested in-radius 0.75mm. For use with water up to 60°C.

Supplier: Terramix SA/Hultec

WRAS Approval Number 0808526

WE-HR-01. Black coloured EPDM sheet rubber material. Shore hardness 73. Tested in-radius of 1mm. For cold water use only.

Supplier: Tianjin Hongrui Rubber Co., Ltd.

WRAS Approval Number 1002539

GJ-yzxjsp 70. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in radius 1mm. for use with hot and cold water up to 80°C.

Supplier: Tianjin Yuzhuang Rubber Factory

WRAS Approval Number 1012500

798 (article number 9063425). Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radus size 1.03mm. For use with water up to 23°C.

Supplier: Trelleborg Forsheda Pipe Seals

WRAS Approval Number 1109508

EPDM 773 & EPDM 797. Black coloured, injection moulded EPDM material. Shore hardness 50. Tested in radius sizes 1.10mm (773) & 1.07mm (797). For use with water up to 23°C.

Supplier: Trelleborg Forsheda Pipe Seals

WRAS Approval Number 1105507

900-67A. Black coloured, compression moulded EPDM sheet material. Shore Hardness 67. Tested in-radius size 1 mm. For use with water up to 30°C.

Supplier: Trelleborg Pipe Seals Santander S. A. U.

WRAS Approval Number 1002550

E7581. Black coloured, injection moulded, EPDM rubber material. Shore hardness 70. Tested in-radius size 1 mm. For use with hot and cold water up to 85°C.

Supplier: Trelleborg Sealing Solutions GmbH

WRAS Approval Number 1008517

56880 EPDM. Grey coloured, compression moulded EPDM material. Shore hardness 60 A. Tested in-radius 0.5mm. For use with water up to 85°C.

Supplier: Tumedei SpA

WRAS Approval Number 1002547

E7131. Black coloured, injection moulded, EPDM rubber material. Shore hardness 70. Tested in-radius size 1mm. For use with hot and cold water up to 85°C.

Supplier: Ulman Dichtungstechnik GmbH

WRAS Approval Number 1003533

EPDM 22292 (extended cure). Black coloured, compression moulded EPDM rubber material. Tested in-radius size 0.57mm. Shore hardness 50. For use with cold water up to 23°C only.

Supplier: Umm Al Quwain Rubber Industries Ltd (URIL)

WRAS Approval Number 1102516

Unitech UR-01. Black coloured, injection moulded EPDM material. Shore hardness 75. Tested in-radius 1mm. For use with water up to 85°C.

Supplier: Unitech Rubber Seal Solutions (Tianjin) Co Ltd

WRAS Approval Number 0905511

R171WM. Black coloured EPDM rubber sheet material. Shore hardness of 75°. Tested in-radius of 1mm. Suitable for use with hot and cold water up to 60°C.

Supplier: Van Ryn Rubber Holdings PTY Ltd

WRAS Approval Number 0909503

VL1713M183. Black coloured, compression moulded, EPDM rubber sheet material. Shore hardness 61. Tested in-radius size 0.94mm. For use with hot and cold water up to 85°C.

Supplier: Vernay Laboratories Inc

WRAS Approval Number 1203516

CEW70. Black coloured, transfer moulded, EPDM rubber sheet material. Shore hardness 70. Test in-radius size 1.27mm. For use with water up to 23°C.

Supplier: VIP Polymers Ltd

WRAS Approval Number 1012517

EW54. Black coloured, EPDM sheet material manufactured using transfer moulding. Tested in-radius size 1mm. Shore hardness 55. For use with water up to 23°C. Note: When processing an application for a Fittings Approval incorporating this product, the in-radius tolerance rule cannot be applied, i.e. the sheet material with a tested in-radius size of 0.5mm is the only product covered by the scope of this approval.

Supplier: VIP Polymers Ltd

WRAS Approval Number 1112516

CVE 61. Black coloured, transfer moulded, EPDM rubber sheet material. Shore hardness 60. Tested in-radius size 1.15mm. For use with water up to 23°C.

Supplier: VIP Polymers Ltd

WRAS Approval Number 1107502

EW54W. Black coloured, EPDM sheet material manufactured by transfer moulding. Shore hardness 55. Tested in-radius 1mm. For use with water up to 23°C.

Supplier: VIP Polymers Ltd

WRAS Approval Number 0810517

EP67. Black coloured EPDM sheet rubber material. Shore hardness 60°. Tested in-radius of 1.0mm & 1.5mm. For hot and cold water use up to 85°C. For use only as an elastomeric seal for pipe joints and fittings that will be used with water main pipe of 25mm ID or greater. Tested at a reduced surface area.

Supplier: VIP Polymers Ltd

WRAS Approval Number 1201505

CEW88. Black coloured, transfer moulded, EPDM rubber sheet material. Shore hardness 88. Test in-radius size 1.27mm. For use with water up to 23°C.

Supplier: VIP Polymers Ltd

WRAS Approval Number 0911511

GJ-yzxjsp 70 EPDM. Black coloured, compression moulded EPDM rubber material. Tested in-radius size 1mm. Shore hardness 70. For use with cold water only.

Supplier: Watts Industries Netherlands BV

WRAS Approval Number 1208524

WF-EPDM. Black coloured, compression moulded EPDM sheet material. Shore hardness 75. Tested in-radius size 3.5mm. For use with water up to 85°C.

Supplier: Weifang Yuchuan Machinery Co,. Ltd.

WRAS Approval Number 0810508

EPDM 5360. Black coloured, EPDM rubber sheet material. Tested in-radius size 1.23mm. Shore hardness 70. For use with cold water only.

Supplier: Weilong H & M Co. Ltd

WRAS Approval Number 1106503

D735-01. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.48mm. For use with water up to 85°C.

Supplier: Westland Gummiwerke GmbH & Co

WRAS Approval Number 1010513

Butylite EN/ENS. Black coloured, calendared EPDM material. Tested in-radius 0.5mm. Shore hardness 62. For use with water up to 23°C.

Supplier: White Cross Rubber Products Ltd

WRAS Approval Number 1011517

EPDM 0536. Black coloured, compression moulded EPDM rubber sheet material. Shore hardness 73. Tested in-radius size 1.02mm. For use with water up to 23°C.

Supplier: Wilhelm Kachele GmbH

WRAS Approval Number 1009524

51M6710. Black coloured, injection moulded EPDM material. Shore hardness 67 Sh A. Tested in-radius 0.5mm. For use with water up to 23°C.

Supplier: Woco Industrietechnik GmbH

WRAS Approval Number 1009523

51M5567 and 51M6767. Black coloured, injection moulded EPDM material. Shore hardness 55 Sh A and 70 Sh A respectively. Tested in radius 0.5mm. For use with water up to 23°C.

Supplier: Woco Industrietechnik GmbH

WRAS Approval Number 0901513

EPDM 51 M 7568. Black coloured sheet rubber material. Shore hardness 75°. Tested in-radius of 1mm. For hot and cold water use up to 70°C.

Supplier: Woco Industrietechnik GmbH

WRAS Approval Number 1009525

51M7531. Black coloured, injection moulded EPDM material. Shore hardness 75 Sh A. Tested in-radius 1mm. For use with water up to 60°C.

Supplier: Woco Industrietechnik GmbH

WRAS Approval Number 1003539

51M7551. Black coloured, injection moulded EPDM sheet material. Shore hardness 75 A. Tested in-radius size 1mm. For use with water up to 23°C.

Supplier: Woco Industrietechnik GmbH

WRAS Approval Number 1105501

51M5532. Black coloured, compression moulded EPDM sheet material. Shore Hardness 55A. tested in-radius 0.5mm. for use with water up to 23°C.

Supplier: Woco Industrietechnik GmbH

WRAS Approval Number 1008546

DY07. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius size 0.5mm. For use with water up to 85°C. Note: When processing an application for a Fittings Approval incorporating this product, the in-radius tolerance rule cannot be applied, i.e. the sheet material with a tested in-radius size of 0.5mm is the only product covered by the scope of this approval.

Supplier: Wuhan Dayu Valve Manufacture Co Ltd

WRAS Approval Number 0905513

ZF-73. Black coloured EPDM rubber sheet material manufactured by compression moulding. Shore hardness of 75. Tested in-radius of 1mm. Suitable for use with hot and cold water up to 85°C

Supplier: Wuxi Zhaofeng Rubber Factory

WRAS Approval Number 0904541

WX-EP70310. Black coloured, compression moulded EPDM sheet material. Shore hardness of 70°. Tested in-radius 1mm. For use with water up to 85°C.

Supplier: Xiamen Waexim Rubber Co Ltd

WRAS Approval Number 0904526

EP02971WRAS. Black coloured, EPDM sheet material manufactured using compression moulding. Shore hardness 70. Tested in-radius size 1mm. For use with hot and cold water up to 85°C.

Supplier: Yaw-Yew Rubber Co. Ltd.

WRAS Approval Number 0907528

EP70125 KW. Black coloured, compression moulded EPDM sheet material, intended for the manufacture of gaskets. Shore hardnes 70. Tested in-radius size 1.5mm. For hot and cold water use up to 60°C.

Supplier: Zenith Industrial Rubber Products PVT Ltd