Range of wall mounted, exposed, thermostatic (shower) blending valves with brass bodies (chromium plated or brushed nickel finishes). Flow is controlled by a quarter turn ceramic disc headwork with a single lever operating member. Temperature is controlled independently via a thermostatic cartridge with a cross top operating member and a separate manual override button. Both inlet elbows incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower valves (brass body with chromium plated trim sets), incorporating either a quarter turn or half turn ceramic disc headwork controlling the flow with either cross top, cube type, or single lever operating members. Temperature is controlled independently via a thermostatic cartridge using either cross top, dome or single lever operating members incorporating a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C.
Range of wall mounted, concealed, thermostatic blending valves (brass body) incorporating a thermostatic cartridge controlling the temperature with a manual override button and dome, single lever, cubed or cross top operating members. Flow is controlled via a ceramic disc diverter which also diverts water to two different outlets. The inlets incorporate stainless steel strainers and approved check valve cartridges however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass) incorporating a two-way ceramic disc headwork controlling and diverting the flow to either an overhead shower outlet or shower handset (not supplied). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The products are supplied with the following operating members: cube (SH-T8089 model), dome (SH-T80810 model) or cross top (SH-T80811 model). Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar, Maximum operating temperature 85°C
Range of concealed wall mounted thermostatic shower valves with brass bodies incorporating quarter turn ceramic disc headwork and a two-way, half-turn ceramic disc manual diverter. Temperature is controlled independently via a thermostatic cartridge with a manual override button. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets on the ½” models also incorporate stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed, thermostatic shower valves (brass body with chromium plated trim sets) incorporating a quarter ceramic disc headwork controlling the flow with either cross top, cube type, or single lever operating members. Temperature is controlled independently via a thermostatic cartridge using either cross top, dome or single lever operating members incorporating a manual override button. Each inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The SH-T8565, SH-T8569, SH-T8567, SH-T85619, SH-T8561, SH-T85616, SH-T85622 and SH-T8563 models also incorporate a stainless steel strainer on each inlet. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, bar type thermostatic shower mixing valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever, dome, cubed or cross top operating member (depending on model). The temperature is controlled independently via a thermostatic cartridge with a single lever, dome, cubed or cross top operating member (depending on model) and incorporates a manual override button. The product also incorporates an approved check valve cartridge located on the inlets of the valve, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products also incorporate a stainless-steel strainer located on the inlets of the valve. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C
Range of quarter turn ceramic disc headworks incorporating brass bodies and EPDM ‘O’ rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of quarter turn ceramic disc headworks with brass bodies, EPDM rubber ‘O’-rings and silicone rubber washers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Manual diverter headwork with a chromium plated brass body and NBR ‘O’ rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Page 1 of 4
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.